Getting error while assigning ABAP Query to Tr.Code
Hi Guys,
There is a problem iam facing with ABAP query while transporting which need to solved asap. It will very greatfull if u guys can resolve this problem.
My problem is, I created one ABAP Query with Name ASSETOVERVIEW. I had transported this even, now when iam going to assign it to one transaction code with se93 lets say ZAOR. I need to give its description and program name in se93 right. now my question is what is program name i need to give in se93. Bcoz in SQ01 where i created the query, there is no name as 'program name' rather there is 'Name' in that we will create the query name i.e, ASSETOVERVIEW. In se93 u give tr.code and when u see down there will be radiobuttons in 'start object',in that i had checked program and selection screen (report transaction) is this right button i had checked or any other i need to check?. I had assigned this name i.e,ASSETOVERVIEW and development class and then when i check the name for syntax check its giving "'ASSETOVERVIEW' does not exist". I don't understand what program name i need to give.
If u guys can help me out with this problem it will be very much appreciable and definetly can get the reward points.
Thanks for as usual help in advance.
Regards.
Hi omer,
1. Just run the query.
2. one selection screen will come
3. then using SYSTEM---->STATUS, (from menu)
look for the program name
4. the program name will be something wired foramt.
/asdfasdf/asdfdas etc.
5. Give that name in se93.
regards,
amit m.
Similar Messages
-
Error while assigning user through users_gen t code
Dear Experts,
While assigning user to the org structure,i am getting below error message.Please guide me.
many thanksHi Ganesh,
Thank you for the update,i was on leave.I could not update the issue.
Issue has been resolved,issue is due to the last name is not maintained for the user in SU01 then user trying the assign to org through users_gen t code.
Then issue raised.
Thank you. -
Getting error while creating report group using T code GR52
HI All,
Below error is coming while generating report group in T code GR52
"Set 01010002SSS6EL0001 does not contain any entries "
Thanks in Advance......Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil -
Getting error while import the query in quality server
Hi all,
I am transporting the user group, infoset and query from development system to quality system and i am able to export it successfully but at the time of import from quality system i am getting the error .
please find the attached description of error-
Query z_it0023 of user group HR_CPC (Import option replace)
compare query z_it0023/ HR_CPC <-> Infoset ZHR_REPORT : Field p0002-ZMIDNM is missing
Import fro query Z_IT0023 / HR_CPC cancelled RC = 08.
I am not getting why this error is occur as field P0002-ZMIDNM is alreday present in the infotype and in infoset both.
Please some one help me out , it would be great help for me.
thanks,
KhushHi Khush,
You need to check whether the field 'p0002-ZMIDNM' is part of an append structure or include structure. If yes then ensure that the main request for the append/include structure for table P0002 is transported first. If the same has been saved as a local request, then, convert the developments to a request and assign a package to it. Transport the changes to table P0002 and then this request.
Regards,
Pranav. -
Getting Error while installing abap Netweaver 7.02 trial, import Abap step
INFO 2011-12-25 18:15:04.687
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2011-12-25 18:15:36.932
CJSlibModule::writeWarning_impl()
Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 2, completed 34, failed 0, total 37.
Import Monitor jobs: running 2, waiting 1, completed 34, failed 0, total 37.
Loading of 'SAPSSEXC_1' import package: ERROR
Loading of 'SAPSSEXC_3' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 34, failed 2, total 37.
Import Monitor jobs: running 0, waiting 1, completed 34, failed 2, total 37.
ERROR 2011-12-25 18:15:36.932
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2011-12-25 18:15:36.948 [sixxcstepexecute.cpp:988]
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).
INFO 2011-12-25 18:15:37.244 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
WARNING 2011-12-25 18:15:37.603 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2011-12-25 18:15:37.603 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO 2011-12-25 18:19:54.317 [sixxcstepexecute.cpp:1073]
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2011-12-25 18:19:54.317 [synxccuren.cpp:1016]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL.
INFO 2011-12-25 18:19:54.520 [synxccuren.cpp:775]
CSyCurrentProcessEnvironmentImpl::setUser() lib=syslib module=syslib
Switched to user: Benazir\nspadm.
INFO 2011-12-25 18:19:54.660 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\import_monitor.java.log.
INFO 2011-12-25 18:19:54.676 [synxccuren.cpp:775]
CSyCurrentProcessEnvironmentImpl::setUser() lib=syslib module=syslib
Switched to user: Benazir\nspadm.
INFO 2011-12-25 18:19:54.707
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2011-12-25 18:20:25.080
CJSlibModule::writeWarning_impl()
Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 2, completed 34, failed 0, total 37.
Import Monitor jobs: running 2, waiting 1, completed 34, failed 0, total 37.
Loading of 'SAPSSEXC_1' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 34, failed 1, total 37.
Loading of 'SAPSSEXC_3' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 34, failed 2, total 37.
ERROR 2011-12-25 18:20:25.080
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2011-12-25 18:20:25.111 [sixxcstepexecute.cpp:988]
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).
INFO 2011-12-25 18:20:25.408 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
WARNING 2011-12-25 18:20:25.767 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2011-12-25 18:20:25.782 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO 2011-12-25 18:21:19.431 [sixxcstepexecute.cpp:1073]
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2011-12-25 18:21:19.431 [synxccuren.cpp:1016]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL.
INFO 2011-12-25 18:21:19.633 [synxccuren.cpp:775]
CSyCurrentProcessEnvironmentImpl::setUser() lib=syslib module=syslib
Switched to user: Benazir\nspadm.
INFO 2011-12-25 18:21:19.867 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\import_monitor.java.log.
INFO 2011-12-25 18:21:19.883 [synxccuren.cpp:775]
CSyCurrentProcessEnvironmentImpl::setUser() lib=syslib module=syslib
Switched to user: Benazir\nspadm.
INFO 2011-12-25 18:21:19.930
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2011-12-25 18:21:50.240
CJSlibModule::writeWarning_impl()
Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 2, completed 34, failed 0, total 37.
Import Monitor jobs: running 2, waiting 1, completed 34, failed 0, total 37.
Loading of 'SAPSSEXC_1' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 34, failed 1, total 37.
Loading of 'SAPSSEXC_3' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 34, failed 2, total 37.
ERROR 2011-12-25 18:21:50.256
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2011-12-25 18:21:50.287 [sixxcstepexecute.cpp:988]
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).
INFO 2011-12-25 18:21:50.599 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
WARNING 2011-12-25 18:21:50.973 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2011-12-25 18:21:50.973 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO 2011-12-25 18:21:55.154 [sixxcstepexecute.cpp:1081]
An error occured and the user decided to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2011-12-25 18:22:06.995 [synxccuren.cpp:1016]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL.
Abort execution because of
controller.userDecideToStop
INFO 2011-12-25 18:22:07.73 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
CGuiProxy::receive(): receive error on socket 616
Dec 25, 2011 6:22:07 PM [Info]: >> Closed input stream
Dec 25, 2011 6:22:07 PM [Info]: >> Closed input stream
Dec 25, 2011 6:22:07 PM [Info]: GUI stopped.
Exit status of child: 2HI,
CONFIG: 2011-12-25 12:51:20
List of packages with table structure: 'SAP0000'.
CONFIG: 2011-12-25 12:51:20
List of packages with views: 'SAPVIEW'.
TRACE: 2011-12-25 12:51:20 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is started.
INFO: 2011-12-25 12:51:20 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is successfully completed.
Primary key creation: before load.
Index creation: after load.
INFO: 2011-12-25 12:51:20
Data codepage 4103 is determined using TOC file 'D:\NWABAPTRIAL70206_64\NWABAPTRIAL70206_64_EXPORT\NWABAPTRIAL70206_64\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP1\DATA\ATAB.TOC' for package 'ATAB'.
TRACE: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC_1' import package is started.
TRACE: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC_3' import package is started.
TRACE: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC_1' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC_1.cmd -dbcodepage 4103 -l SAPSSEXC_1.log -nolog -c 50000 -force_repeat -loadprocedure dbsl
TRACE: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC_3' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC_3.cmd -dbcodepage 4103 -l SAPSSEXC_3.log -nolog -c 50000 -force_repeat -loadprocedure dbsl
ERROR: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC_1' import package is interrupted with R3load error.
Process 'C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC_1.cmd -dbcodepage 4103 -l SAPSSEXC_1.log -nolog -c 50000 -force_repeat -loadprocedure dbsl' exited with return code 2.
For mode details see 'SAPSSEXC_1.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2011-12-25 12:51:20 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC_3' import package is interrupted with R3load error.
Process 'C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC_3.cmd -dbcodepage 4103 -l SAPSSEXC_3.log -nolog -c 50000 -force_repeat -loadprocedure dbsl' exited with return code 2.
For mode details see 'SAPSSEXC_3.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2011-12-25 12:51:50
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2011-12-25 12:51:50
2 error(s) during processing of packages.
INFO: 2011-12-25 12:51:50
Import Monitor is stopped.
THANKS -
Getting error while executing the query in query generator
Hi all
I need to execute on query where I set perameter ''delivery doc date'' but when I execute its giving me error
Please help
Error is :- 1) .[Microsoft][SQLSERVER NATIVE CLINT 10.0][SQL SERVER] MUST SPECIFY TABLE TO SELECT FROM ,2 [Microsoft][SQLSERVER NATIVE CLINT 10.0][SQL SERVER] STATMENT 'BLANKET AGREEMENT'(OOAT) (s) COULD NOT BE PREPARED .HELP
SELECT ELECT T0.[CardName] PartyName, T1.[Dscription] as 'Item description', T0.[NumAtCard] as 'Customer Ref No',
T1.[ShipDate] as 'Del Date', T0.[DocNum] as 'SO No', T0.[DocDate] as 'SO Date', T1.[Quantity],
T1.[Price],T1.[Quantity]*T1.[Price] as 'Line total without tax', ISNULL( T1.[DelivrdQty],0) As DelivrdQty,
ISNULL( T1.[DelivrdQty]*T1.[Price],0) as 'Delivered amount', T1.[OpenQty] as 'pending qty',
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0) as WIP,
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0)*T1.Price as Value
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry join OCRD T3 on t3.CardCode=t0.CardCode
where T1.ShipDate between [%0]and [%1] and t3.groupCode in('115','116') ORDER BY T1.ShipDatehi
you need to use parameters.
try this:
/*select from [dbo].[RDR1] T1*/
DECLARE @FromDate datetime
/*where*/
set @FromDate =/* T2.ShipDate */N'[%0]'
/*select from [dbo].[RDR1] T1*/
DECLARE @ToDate datetime
/*where*/
set @ToDate =/* T2.ShipDate */N'[%0]'
SELECT T0.[CardName] PartyName, T1.[Dscription] as 'Item description', T0.[NumAtCard] as 'Customer Ref No',
T1.[ShipDate] as 'Del Date', T0.[DocNum] as 'SO No', T0.[DocDate] as 'SO Date', T1.[Quantity],
T1.[Price],T1.[Quantity]*T1.[Price] as 'Line total without tax', ISNULL( T1.[DelivrdQty],0) As DelivrdQty,
ISNULL( T1.[DelivrdQty]*T1.[Price],0) as 'Delivered amount', T1.[OpenQty] as 'pending qty'
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0) as WIP,
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0)*T1.Price as Value
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry join OCRD T3 on t3.CardCode=t0.CardCode
where T1.ShipDate between @FromDate and @ToDate and t3.groupCode in('115','116') ORDER BY T1.ShipDate -
Getting Error while running this query
Hi,
SELECT SUM(BATCHWISE_COUNT) TOTALBATCHCOUNT,
TO_CHAR(SUM(BATCHWISEAMOUNT),'9,99,99,99,99,99,99,99,990.99') TOTALAMOUNT ,
SUM(SLIP_RECORDS) TOTALSLIPCOUNT,
SUM(CHEQUEONLY_RECORD) TOTALCHEQUECOUNT
from (SELECT COUNT(TI.FLDITEMINITIALID) BATCHWISE_COUNT from TBLITEMINITIAL TI),
(select SUM(IT.FLDAMOUNT)/100 BATCHWISEAMOUNT from TBLITEMINFOTRANS IT ),
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND TI.FLDITEMTYPE = 'P' AND TI.FLDCAPTURINGMODE = 'CP') SLIP_RECORDS,
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND FLDITEMTYPE = 'C' AND FLDCAPTURINGMODE = 'CO') CHEQUEONLY_RECORD
from TBLITEMINITIAL TI,
TBLITEMINFO II,
TBLITEMINFOTRANS IT
WHERE II.FLDITEMINITIALID = TI.FLDITEMINITIALID
AND II.FLDITEMID = IT.FLDITEMID
GROUP BY TRUNC(TI.FLDCAPTURINGDATE),TI.FLDBATCHNUMBER,TI.FLDCAPTURINGBRANCH,TI.FLDSCANNERID)
Im geeting error
ORA-00933: SQL command not properly ended
when running this query
I don't know what mistake i have done in this query , Kindly help for solving this issue
Thanks
Bala,
Edited by: 965937 on Feb 11, 2013 9:25 PMDear Friend
Try with the query below,
<<
SELECT SUM(BATCHWISE_COUNT) TOTALBATCHCOUNT,
TO_CHAR(SUM(BATCHWISEAMOUNT),'9,99,99,99,99,99,99,99,990.99') TOTALAMOUNT ,
SUM(SLIP_RECORDS) TOTALSLIPCOUNT,
SUM(CHEQUEONLY_RECORD) TOTALCHEQUECOUNT
from (SELECT COUNT(TI.FLDITEMINITIALID) BATCHWISE_COUNT from TBLITEMINITIAL TI),
(select SUM(IT.FLDAMOUNT)/100 BATCHWISEAMOUNT from TBLITEMINFOTRANS IT ),
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND TI.FLDITEMTYPE = 'P' AND TI.FLDCAPTURINGMODE = 'CP') SLIP_RECORDS,
(SELECT COUNT(FLDITEMINITIALID) FROM TBLITEMINITIAL TI WHERE FLDBATCHNUMBER NOT IN (select FLDBATCHNUMBER from TBLITEMINITIAL_DEL where TI.FLDCAPTURINGDATE=FLDCAPTURINGDATE) AND FLDITEMTYPE = 'C' AND FLDCAPTURINGMODE = 'CO') CHEQUEONLY_RECORD
from TBLITEMINITIAL TI,
TBLITEMINFO II,
TBLITEMINFOTRANS IT
WHERE II.FLDITEMINITIALID = TI.FLDITEMINITIALID
AND II.FLDITEMID = IT.FLDITEMID
GROUP BY TRUNC(TI.FLDCAPTURINGDATE),TI.FLDBATCHNUMBER,TI.FLDCAPTURINGBRANCH,TI.FLDSCANNERID;
Regards
Ahamed Rafeeque Cherkala
Edited by: Ahamed Rafeeque on Feb 12, 2013 3:20 AM -
Getting Error while assigning Chart of Depriciation to Company code
Hi Every one,
I was doing configuration in Asset Accounting. It won't allow me to assign chart of depn to company code. It showing me with the error tht"Inconsistency between FI company code SA01 and chart of depriciation"
I have assigned my group currency with legal valuation(0) in FI.
Can any one help me on the same?
With Rgds,
SanketHi,
Thanx for the above answer. Can you please let me know what kind of deprecation area I need to select if I have not defined additional currency & what if I have defined additional currency?
Thanks,
Sanket -
Error while assigning external event
Hi Guys!
I'm getting error, while trying to assign an external event on table output.
I've got a button with action POSTPO, that is residing in standalone form. That action should send data form some form and a table to BAPI.
When I try to configure connector line and assign that *event (from event scope 'any element'), I recieve Internet Explorer's script error " 'length' is null or not an object".
Here are two screenshots: [1|http://www.dennisk.org/tmp/SAP/event_err.jpg], [2|http://www.dennisk.org/tmp/SAP/event_err_mod.jpg].
At the same model I can assign that event to different form and table. The only difference is that before that faulty elements there is a chain of two directly connected BAPIs.
Is there a way to fix it?
Thanks in advance!
Regards,
DKanybody?
-
Team,
I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
On Google search, i found below article which is best matching for this error
http://support.microsoft.com/kb/324321
I have follows each step of troubleshooting. But still the issue persists.
Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
/* SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
But there was only one row returned with create date of today's.
Error while Assigning database level role (db_datareader) to SQL login (Domain Account)
Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
I tried other ways also.
A. Creating login and providing permission in one go only = User account is not created
B. Instead of GUI, use query to create login and provide required permission = Same error.
Does anybody has faced any such situation
ChetanSee the below output
srvid
sid
xstatus
xdate1
xdate2
name
password
dbid
language
isrpcinmap
ishqoutmap
selfoutmap
NULL
0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
14
20:25.9
57:33.4
UKBAA\LHRAPPMuttavarapuS
NULL
1
us_english
0
0
0
Chetan -
Error while trying to query mbean
I am getting an error while trying to query MBeans:
<Mar 27, 2007 4:27:32 AM MDT> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
ERROR: Tue Mar 27 04:27:32 MDT 2007MBeanHome being refreshed weblogic.management.NoAccessRuntimeException: User guest does not have access permission on weblogic.admin.mbean.MBeanHome
Bea doc says that the cause of this error is that the context is closed in a different thread than the one that created it. I have multiple thread that query the mbeans. The code that does the above is in a synchronized block. The code runs fine on some environments. On wls 8.1 it is giving the above error.
Anyone faced this issue? Any ideas, suggestions?
thanks a lot
JainHi Daniel
Thanks for your help. Here is some more info.
I have another application that goes out and tries to get the MBeanHome. Here is the code:
Environment env = new Environment();
env.setProviderUrl(t3URL);
env.setSecurityPrincipal(t3UserName);
env.setSecurityCredentials(t3Password);
ctx = env.getInitialContext();
mBeanHome = (MBeanHome) ctx.lookup MBeanHome.ADMIN_JNDI_NAME);
This code runs fine in the app. where it is not threaded. But the same code when run in a separate thread is throwing the error. It is happening only in wbl 8.1. In wls 6.1 it runs fine. It is strange. Any clues will be appreciated. -
Getting error while creating the Shopping cart.
Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
DevTry the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears. -
Error while executing BEX query via FM
Hi Friends,
I am getting following error while executing a query via FM RRW3_GET_QUERY_VIEW_DATA.
Please see the error screenshot as follows.
the I_T_PARAMETERS entered are as follows.
Please let me know what is missing.
Thanks.
Regards,
Hrishikeshthe key date variable 0DAT is normally filled by a SAP exit variable, but this may not be the case. it could have been changed in the query designer, check the query in query designer and see.
Try passing 0DAT in the variable list with todays date -
Getting error while running Perl adcfgclone.pl appsTier
hi ,
i m getting error while running Perl adcfgclone.pl appsTier
error:ksh: Perl: not found
i check for per and ksh
which perl
/usr/bin/perl
which ksh
/usr/bin/ksh
(my os out put for perl ,my os is SunOS testserver 5.10 Generic_137137-09 sun4u sparc SUNW,Ultra-250)
perl -V
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/5.00503
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/site_perl/5.005
/appl2/applmgr2/prodappl/au/11.5.0/perl
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
which i need to set in path
PATH=$PATH:/usr/local/bin:/usr/ccs/bin:/usr/sfw/bin (like this )
export PATH
please help me outhi ,
here is the out put
# pwd
/appl2/applmgr2/prodora/iAS/Apache/perl
# perl -V
Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
Platform:
osname=solaris, osvers=2.10, archname=sun4-solaris-64int
uname='sunos localhost 5.10 sun4u sparc SUNW,Ultra-2'
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO',
optimize='-xO3 -xspace -xildoff',
cppflags=''
ccversion='Sun WorkShop', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =''
libpth=/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lc
perllibs=-lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-R /usr/perl5/5.8.4/lib/sun4-solaris-64int/CORE'
cccdlflags='-KPIC', lddlflags='-G'
Characteristics of this binary (from libperl):
Compile-time options: USE_64_BIT_INT USE_LARGE_FILES
Locally applied patches:
22667 The optree builder was looping when constructing the ops ...
22715 Upgrade to FileCache 1.04
22733 Missing copyright in the README.
22746 fix a coredump caused by rv2gv not fully converting a PV ...
22755 Fix 29149 - another UTF8 cache bug hit by substr.
22774 [perl #28938] split could leave an array without ...
22775 [perl #29127] scalar delete of empty slice returned garbage
22776 [perl #28986] perl -e "open m" crashes Perl
22777 add test for change #22776 ("open m" crashes Perl)
22778 add test for change #22746 ([perl #29102] Crash on assign ...
22781 [perl #29340] Bizarre copy of ARRAY make sure a pad op's ...
22796 [perl #29346] Double warning for int(undef) and abs(undef) ...
22818 BOM-marked and (BOMless) UTF-16 scripts not working
22823 [perl #29581] glob() misses a lot of matches
22827 Smoke [5.9.2] 22818 FAIL(F) MSWin32 WinXP/.Net SP1 (x86/1 cpu)
22830 [perl #29637] Thread creation time is hypersensitive
22831 improve hashing algorithm for ptr tables in perl_clone: ...
22839 [perl #29790] Optimization busted: '@a = "b", sort @a' ...
22850 [PATCH] 'perl -v' fails if local_patches contains code snippets
22852 TEST needs to ignore SCM files
22886 Pod::Find should ignore SCM files and dirs
22888 Remove redundant %SIG assignments from FileCache
23006 [perl #30509] use encoding and "eq" cause memory leak
23074 Segfault using HTML::Entities
23106 Numeric comparison operators mustn't compare addresses of ...
23320 [perl #30066] Memory leak in nested shared data structures ...
23321 [perl #31459] Bug in read()
27722 perlio.c breaks on Solaris/gcc when > 256 FDs are available
SPRINTF0 - fixes for sprintf formatting issues - CVE-2005-3962
6663288 Upgrade to CGI.pm 3.33
REGEXP0 - fix for UTF-8 recoding in regexps - CVE-2007-5116
Built under solaris
Compiled at Jul 31 2008 12:07:52
@INC:
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
Thanks &Regard -
Error while executing the query
Hi all,
I am facing two errors while executing my query namely
1)The validity interval has initial value as lower limit.
2)Diagnosis
Query uses non-cumulative key figures. It requires calculation for non-cumulative values for more than 2000 periods in time. The most common reason for this is that the non-cumulative InfoCube has a very large validity interval and the query has no time restrictions. With exception aggregation AVERAGE (AV1 or AV2) in particular, this lack of time restriction would result in considerable memory and performance problems.
System Response
Query cannot be executed in this way.
Please suggest a possible reason for these errors.
Thanks and Regards.
Mudit KhannaHi,
See
Refer Notes 496638,571364
210432
528202
1318741
208546
and also see simila thread
Problem getting data from BF cube in report (Non cummulative keyfigures)
Thanks
Reddy
Maybe you are looking for
-
How to loop through a Data Node
Hello, I have an Interactive Adobe form in WebDynpro Java project. My data View tab includes the following structure: Bapi_test ValueHelpData CodeNumber CodeDescription Can someone please tell how I can loop through the ValueHelpData node, and get
-
ISight not Working with Messages/Facetime
I have a MacBook Pro 13 inch mid 2009 that I connect to a 22" cinema display (very old but still works beautifully) and I have an older cylindrical iSight camera mounted to the top of the cinema display (laptop is closed and cinema display is only mo
-
Refresh fails on materialized view with CLOB data type
Hi, Hope somebody can help me with this issue. Some materialized views get status broken on refreshment, but only sometime. When I try to refresh them manually I get following message: "ORA-01400: cannot insert NULL into...". But I know for sure that
-
Multiple FPGA targets under one cRIO controller
Hi ! I was reading the cRIO System Configuration Information (CRI) Reference Library article (http://www.ni.com/example/51852/en/) and there Figure 9 shows a cRIO Controller with multiple FPGA targets. How can this be accomplished? In my case, when I
-
if im purchasing stock photos (still) from say istockphoto does DPI even matter in video editing? If the resolution is high enough, which is suppose if im going to a 4:3 output then their "small" size 850x565px 11.8 x 7.8 @ 72DPI would be good enough