Getting error while drill through a report

Hi,
I am getting this following error when I drill through a report and the OFA application freezes. I hope this is problem with the OFA installation.
(MXMSERR) S does not exist in any attached database.
What does it mean and what could be the problem ?
Please let me know how to rectify the problem?
Thanks
Murugesan

Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H

Similar Messages

Getting error while refreshing the Webi report

Hi Guys,
I am getting error, while refreshing Webi reports. Error like:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
Could anyone please reply.
Regards,

Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H

Getting error while schedule a webi report

Hi All,
I am getting error "A database error occured. The database error text is: The supplied XML is not valid. [Measures].[4KO5AOUTL3ZKE55WDDOMUB0AI]. (WIS 10901) " while scheduling a Webi report.
Could anyone help me regarding the error?
Regards

Hi Manoj,
Go to the controls tab in parameters in universe designer and there increase the "Limit size of result set to" and "limit execution time to".
Also in webi go to the edit query and increase the "maximum rows retrived" and "maximu retrievel time".
I think this should avoid partial results.
Thanks,
Neeraj

User is getting Error while opening a Discoverer report::Model Manipulation

Hi,
I am stuck with a peculaiar error as reported:
While opening a Discoverer Report its giving Error:
Model manipulation via state object.Server writes and pass through reads can only be made on objects attached to the model
instance of
oracle.disco.model.corbaserver.ScheduleRunWorkbookInfoImpl made state from:removed from
oracle.disco.model.corbaserver.schedule.ScheduleRunWorkbookInfoImpl
Kindly any help will be benefitial for me.
Thanks and Regards

Pl post details of OS, database and Discoverer versions. Pl detail the steps to replicate this error. This MOS Doc may be helpful
734850.1- Error "Failed to Find Workbook ParameterValue.." When Trying to Edit Scheduled Discoverer Workbooks
HTH
Srini

Getting Error while posting through KB11N : No true sender object entered

HI Expert,
We have stastical internal order defined and same we are using in Asset. Let me explain the scenarion.
We created the Purchase requisition with the stastical Internal Order then we did Purchase Order and MIGO -Goods Receipt.
Now we realised that wrong Internal Order was used. Now we want to tranasfer cost from that Internal order to New Internal Order. we are trying to post through KB11N but while giving the all details i am getting error as per below;
No true sender object entered
Message no. BK175
Diagnosis
You have entered a statistical object as a sender. Statistical objects, however, are only intended for use with dual account assignments.
Procedure
1. If you require a dual account assignment, enter a true object as a sender also.
We are using cost element with having cost element category 90.
I don't no which is the true sender Object.
Thanks in advance
ealry help will be highly appreciated.

Your postings had happened to a statistical internal order. I hope the real postings might have happened to a cost centre.
You cannot settle anything from a statistical internal order. It is just for information purpose only. If the above posting had captured a cost centre (real posting), you can distribute/assess the cost from the cost centre to a real internal order for your purpose.

Iam getting error while running the xml report

Hi,
I designed the template by using subtemplate.If I run the concurrent program I am getting error like
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Thanks,
Bhuvana.

Whats the error?
Maybe post the log file so we can see the full file

Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

i am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name       Type
appid        String
location    String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name       Path       Type
Url          /text()      String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.

i exported the application from apex.oracle.com and imported it to our environment
import went fine, but when I ran the IR page I got
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well

APEX:Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

I am using Apex 4.2.2.00.11
am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name       Type
appid        String
location    String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name       Path       Type
Url          /text()      String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.

336554,
Looks like there is a 127-column limit on the number of report columns supported when using that wizard. Do you have more than that?
57434

Getting error while refreshing a Webi reports for a specific universe

Hi Experts I am trying to refresh a WEBI Report but getting this error: A database error occured.
The database error text is (cs)"Specified network layer is invalid" Previously this was working fine...
from today itself I am getting this error
My DB is DB2 DB Drivers: DB2 V9 ->JDBC Driver

Test Connection is always successful...
Not sure whats wrong

Getting Error while posting through BAPI_ACC_DOCUMENT_POST

Hi Folks,
   I could not post an GL account using the BAPI function module BAPI_ACC_DOCUMENT_POST . The code was,
wa_docheader-bus_act    = 'RFBU'.
wa_docheader-username   = 'CHARAN'.
wa_docheader-comp_code = '0147'.
wa_docheader-doc_date   = '20101006'.
wa_docheader-pstng_date = '20101006'.
wa_docheader-DOC_TYPE   =      'SA'.
*wa_docheader-REF_DOC_NO =     'UNASSIGNED'.
wa_glaccnt-itemno_acc = '0010'.
wa_glaccnt-gl_account = '0000100632'.
wa_glaccnt-item_text   = 'POSTING TO GL'.
APPEND wa_glaccnt TO i_glaccnt.
wa_glaccnt-itemno_acc = '0020'.
wa_glaccnt-gl_account = '0000100634'.
wa_glaccnt-item_text   = 'POSTING TO GL'.
APPEND wa_glaccnt TO i_glaccnt.
*wa_pyaccnt-itemno_acc = '0000100634'.
*wa_pyaccnt-gl_account = '0001234567'.
*APPEND wa_pyaccnt TO i_pyaccnt.
wa_curamt-itemno_acc    =      '0010'.
wa_curamt-currency      =        'USD'.
wa_curamt-curr_type     = '00'.
wa_curamt-amt_doccur    = 200 .
APPEND wa_curamt TO i_curamt.
wa_curamt-itemno_acc    =      '0020'.
wa_curamt-currency      =        'USD'.
wa_curamt-curr_type     = '00'.
wa_curamt-amt_doccur    =     200.
APPEND wa_curamt TO i_curamt.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
    documentheader          = wa_docheader
CUSTOMERCPD             =
CONTRACTHEADER          =
IMPORTING
OBJ_TYPE                =
OBJ_KEY                 =
OBJ_SYS                 =
TABLES
    accountgl               = i_glaccnt
ACCOUNTRECEIVABLE       =
    accountpayable          = i_pyaccnt
ACCOUNTTAX              =
    currencyamount          = i_curamt
CRITERIA                =
VALUEFIELD              =
EXTENSION1              =
    return                  = i_ret
PAYMENTCARD             =
CONTRACTITEM            =
    extension2              = i_ext2
REALESTATE              =
ACCOUNTWT               =
The Output error i'm getting is :
Error in document : BKPFF $ BH2CLNT200 400.00 USD
Balance in transaction currency.
Please help me in posting the Gl document successfully. Help will be rewarded.
Thanks in advance.

Total amount of internal table I_CURAMT-AMT_DOCCURR should be zero (Credit & Debit).
Edit : See [Accounting Document Interface |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=195726664] for reference.
Edited by: Vinod Kumar on Oct 8, 2010 1:04 PM

Error while scheduling through web service

We have created Web service through WSDL of OBI Publisher. Also we created a web service proxy client to call the services offered by OBI Publisher. We actually want to "Automate the Scheduling of Reports" according to our requirement:
1. We used to schedule the reports manually by giving the parameters(used to populate data in reports) and other fields like select report name, report destination, format of reports ( .pdf, .docx,etc) through Oracle BI Publisher.
2. As there are thousands of permutations of report input parameters possible, so it is difficult to schedule them manually.
3.We also want to schedule report to a particular folder according to some parameter, for the ease of the user visibility.
Above requirements are not currently available with Oracle BI Publisher.
We are getting error while scheduling through ScheduleRequest class.
The client.java is as follows:
public class ScheduleServiceClient
@WebServiceRef
private static ScheduleService_Service scheduleService_Service;
public static void main(String [] args)
    scheduleService_Service = new ScheduleService_Service();
    ScheduleService scheduleService = scheduleService_Service.getScheduleService();
    // Add your code to call the desired methods.
    try {
                FTPDeliveryOption ftpdo =new FTPDeliveryOption();
                ftpdo.setFtpServerName("ServerName");
                ftpdo.setFtpUserName("Username");
                ftpdo.setFtpUserPassword("Password");
                ftpdo.setRemoteFile("/path/TestFile");
                ftpdo.setSftpOption(true);
                List<FTPDeliveryOption> listobj=new ArrayList<FTPDeliveryOption>();
                listobj.add(ftpdo);
                ArrayOfFTPDeliveryOption ar =new ArrayOfFTPDeliveryOption();
                ar.setItem(listobj);
                DeliveryChannels dc = new DeliveryChannels();
                dc.setFtpOptions(ar);
                ScheduleRequest scheduleRequest = new ScheduleRequest();
                scheduleRequest.setDeliveryChannels(dc);
                scheduleRequest.setJobLocale("en-US");
                scheduleRequest.setUserJobName("Job_1_WebService");
                scheduleRequest.setDataModelUrl("Url");
                scheduleRequest.setStartDate("Mar 27, 2015 12:40:00 PM");
                scheduleRequest.setJobTZ("[GMT+05:30] Calcutta, Chennai, Mumbai, New Delhi");
                String userID = "BI_Publisher_Username";
                String password = "BI_Publisher_Password";
                scheduleService.scheduleReport(scheduleRequest,userID,password);
            } catch(Exception exception) {
                exception.printStackTrace();
Snapshot of error is attached.
Kindly suggest the way of getting out of this error.

Hi
Check this thread
WD Message Manager
Reward opints if usefull....

Error in Drill through reports

Hi All,
I need a help with Drill through reports in Essbase Studio.
I created a drill through report successfully. Now When I trill to access that report using SmartView, I am able to see the report at generation 2, but as soon as drill down, i am getting following error.
" BPM drill through functionality not available. EMC required in MDX query "
Please advice.

Can anyone please give some suggestions ? I guess I figured out that whenever there is a duplicate member present in a hierarchy, its gives me the following error:
*" BPM drill through functionality not available. EMC required in MDX query "*
Please advice.

Getting error while running SSRS report in SharePoint 2010

Hi,
I am getting below error while running a SSRS reports in SharePoint. Your help will be appreciated
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E)
Timestamp: Wed, 5 Nov 2014 11:58:42 UTC
Message: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 503
Line: 5
Char: 62123
Code: 0
Thanks,
Manjunath

Hi,
According to your post, my understanding is that you get error while running SSRS reports.
Basically, If the Request Management service is enabled, it manages all incoming requests by evaluating logic rules against the user requests in order to determine what\which action to take and which machine or machines (targets) in the farm should handle
the request.
By default the Request time out value for Request Management service are as follows,
RequestTimeout : 00:01:40
RequestExecutionTimeout : 01:00:00
So the error throws from RM service for those reports who take more than 1 minute to generate the report.
To solve this issue, we can stop the Request Management service.
Or increase the time out
value by making use of following PowerShell script.
$waUrl = "URLofWEbApp"
$wa = Get-SPWebApplication $waUrl
$rmSettings = $wa | Get-SPRequestManagementSettings
$req=$wa.RequestManagementSettings
$timeout2= New-TimeSpan -minutes 5
Sreq.Requesttimeout=$timeout2
$req.update()
For more information：
http://blogs.technet.com/b/sajiths/archive/2014/08/19/ssrs-reports-timed-out-with-39-503-39-error-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Getting error while installing reporting servcies on existing sql server 2012.

Hi Expaerts,
sql 2012 sp1:
getting error while installing Reporting services on existing sql server. at final step
Error on scren: install_rsharepoint_cpu64_action : roll back , rolling back action.
error on popup windows: ' one or more files required to restore your computer to its previous state colud not be found. restoration will not be found.
Thanks in advance.

Hello,
Please help to collect the useful log information while install SQL Server Reporting Services. Here is the article for your reference, please see:
Navigating the Setup Logs when you install SQL Server 2012 Reporting Services:
http://blogs.msdn.com/b/jtarquino/archive/2012/03/14/navigating-the-setup-logs-when-you-install-sql-server-2012-reporting-services.aspx
Regards,
Elvis Long
TechNet Community Support

Error while running the financial report in the workspace.

Hi,
Im getting the below error while running the financial report in the workspace in HTML mode.
*"Required application module reporting.HRRunDlg is not configured. Please contact your administrator".*
And im not able to login to the Hyperion Financial Reporting as well.. i get the below error
*"You are not authorized to use this functionality. Contact your administrator"*
Can someone let me know how to resolve this error.

You don't mention the version, what app server or web server you are using, etc.. That information might be helpful, but in general, you can try the following:
1. Make sure you have gone through the FR Web App deployment steps and verify the settings entered in the Config Tool.
2. For version 11.1.1.x and 9.3.1.x, try opening the report in FR Studio and running it via the FR Studio Print Preview (*bold*not*bold* Web Preview.) If the report runs/processes, then the back-end FR Services are functioning and the issue is confined to the web interface. Verify the FR Web App is up and listening on the designated port (8200, by default), check the FR Web App logs and the App Server (WebLogic, WebSphere, Tomcat, OAS) logs for errors/issues.
If the report fails to process in FR Studio Print Preview, then there is a problem with the FR Reporting Server Service. Check to make sure the service is up/functioning and check the FR Report Server logs for errors.
3. Test access to other FR functionality in workspace (ex: Files->Preferences->Financial Reporting or Explore->Tools->Database Connection Manager?) If these don't work, then try to connect to the following URLs:
http://workspaceServer:19000/hr/status.jsp
http://frWebAppServer:8200/hr/status.jsp
Note: The URLs above assume standard/default ports. You may need to adjust them for your environment.
If the first URL fails, but the second URL works, there is a problem with the HTTP redirect settings on the Web Server (Apache, IIS, etc.) Run through the Workspace deployment and make sure the Web Server Config settings point to the right ports/servers.

Getting error while drill through a report

Similar Messages

Maybe you are looking for