Getting error while opening the workbook

Hi,
I am getting one error while opening the workbook.
Error: The Dependency "Join condition" is not found in EUL.
Basically, the workbook was working fine. But we droped some joins and recreated new joins. After this change, our worknbooks starts giving this error.
Please advice.
Where i can get the dependency information in EUL?
Thanks, rajesh

This has to be one of the most 'pain in the butt' errors you can get (well ... 0000 - normal successful completion is another).
Although I've seen this one for years, these days I'm finding many more examples that are happening to me with this (simply the environment I'm in) and in many cases, requires rebuilding the workbook again. For example, sometimes I put in the join that I think it's having a problem with, but the existing workbook simply won't run. Recreating the workbook exactly the same gets it to work properly. Maybe it's a 4.x thing (version I'm on these days) ... but just a warning that you may well have to rebuild.
Russ

Similar Messages

  • Getting Error While Opening the Oracle Form 6i in 10g

    Hi All ,
    FRM-10102: Cannot attach PL/SQL library XXX. This library attachment will be lost if the module is saved.
    I am getting above error message while opening Oracle 6i Form in 10g.
    I get the following Alert message when I try to attach the library to my form -
    Attached library name
    S:\.........xxx.pll contains non-portable directory specification. Remove path? Yes/No?
    If I select 'No', the Form compiles and runs without any error.
    But if I select 'Yes', I get the following error message:
    FRM-40039: Cannot attach library xxx while opening form.
    All files (fmb, fmx, pll, plx) are on the same path. I detached and then re-attached the library but this didn't work for me?
    Help Appreciated.
    Thanks & Regards,
    Ram.

    use the shiped batch program frmplsqlconv.bat to convert all your forms/librarys from Forms 6i to 10g.
    you can call it in wizard mode from the start menu (e.g. OracleDeveloperSuite <OraHome> => Forms Developer => Forms Migration Assistant (GUI Mode) and follow the instructions step by step
    or you can call it by batch to convert all your forms/librarys. The batch file is found in
    <ORA10g_HOME>BIN\frmplsqlconv.bat
    =>
    frmplsqlconv.bat <formname>

  • Error while opening the workbook through Oracle EBS

    Hi All,
    I have created a discoverer report in Production DB instance. I can successfully open and run the report using desktop edition. But the same report cannot be open through Oracle Ebusiness Suite.
    It gives the following error
    Error opening Workbook named:
    The following Item cannot be found:Xx test V.column1Can any one help me to solve this. Any one can tell me what's the cause of this error?
    Thanks
    Alaka

    Hi alaka,
    But the same report cannot be open through Oracle Ebusiness Suite.To open it in the ebusiness suite,you need to register the report as a form page and assign a responsibility in ebusiness suite for the end user to open the report.
    did u register the reports and given access ??
    By,
    Kranthi.

  • Getting Error  while opening the form

    Hi All,
    I am getting error "Frm - 10102: Can not attach PL/SQL library d2kwutil.pll.This library attachment will be lost if the module is saved". Please advise.
    Thanks,
    Tandra

    We are using win_api_environment.Get_Connect_String function.
    One more problem i have.I am not able to run the form like when i am running the form, the form is getting closed. I am using Oracle AS Form services to run the form. I have started OC4J Instance.
    Can you please suggest what steps i need to do in order to run a form in 10g?

  • User getting error while opening the report

    Admin can run the report, but users cannot.
    This is XI3.1 Cluster version on Linux. User's cannot run the webi document, getting the error below
    An error occured when trying to set preferences. Please contact your Business Objects administrator. (Error: INF)
    Also when the users try to set the preferences they get this error
    An error has occurred: Sorry, you do not have the right to 'Edit objects' (ID: 6) for 'linwe' (ID: 18496663). Please contact your administrator if you require this right.
    It looks like it might be issue with the rights, but can't figure out where.
    These users are in the developer access level where they have almost all the rights.
    Please help

    inorder for the users to change their preferences, following right must be enabled
    Access Levels --> select the ACL and go to included rights
    Application --> Infoview -->Change user's preferences
    Can you check whether it is enabled or not?

  • Getting error while opening Workbook

    hi Gurus,
               In the production system I am getting error while opening the workbook 'THE WORKBOOK DOESNOT EXISTS IN THE DOCUMENT STORES' through analyzer, transported successfully. Even single workbook not able open, even I am able to open the queries, what could be the reason, kindly suggest me ASAP.
    with regards,
    Ravi Kumar.

    Ravi,
    They might have got transported. But, they need to be manually put in the roles folder. Ask your manager to do that if you don't have anuthorization.
    You need to goto RSSM.
    Thanks

  • "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file

    Hi Techys,
    can you give me the suugestions for below error in sharepoint 2010.
    Error: "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file.
    User having the contribute permission.
    as a admin i can open the document without any error.
    user wants to open the document via online and VPN connection.
    while the user seeing the document info the below error is indicationg .
    Offline Copy, Work book is readonly Mode.
    The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file which was upto date.
    Many Thanks,
    Madhu

    Make sure that the user is able to access workstream from the site collection through VPN. If the user is able to access already, try to download the file locally and see if the data is getting loaded and upload again.
    --Cheers

  • Getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1. It is creating issue to convert PDF into TIFF. Please provide the solution ASAP

    Hello All,
    I am getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1.
    Also, it is creating issue to convert PDF into TIFF. Please provide the solution ASAP.

    I am using Adobe reader XI. When i open PDF it gives "OUT of memory" error after scrolling PDF gives another alert "Insufficient data for an image". after clicking both alerts it loads full data of PDF. It is not happening with all PDFs. couple of PDFs are facing this issue. Because of this error my software is not able to print these PDFS into TIFF. My OS in window7*64. I tried it on win2012R2 and XP. Same issue is generating there.
    It has become critical issue for my production.

  • Error while opening the receipt entry form in AR module.

    Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
    forms , we are getting the error message as :
    NO_DATA_FOUND
    FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
    Kindly help in resolving.
    We have ERP version of 11.5.10.2

    Please also see the following docs.
    Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
    FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
    APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
    ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
    Thanks,
    Hussein

  • Error while executing the workbook query.

    Hi guyz
    i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
    The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
    we re-transported the queries but still we are facing the same problem.
    while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
    " NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
    the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
    could someone please tell me where we went wrong and why we are getting this error.
    Regards,
    Anil Vadde

    Hey ,I think data load to your target on which the query was based had some issue.
    Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
    Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
    Regards,
    RK

  • Error while opening the backup information fom Maxdb

    Hello All,
    I am getting the below error while opening the backup information from Maxdb.
    Backup history file /sapdb/data/wrk/<sid>/dbm.knl corrected in line <xxxx> ; 2012-02-21 07:30:25 can not be convert in to a signed 32 bit integer value
    The full line is as below from the dbm.knl file:
    4F4337C5014C|LOG_000030571|SAVE WARM|2012-02-21 07:16:03|2012-02-21 07:20:49|2012-02-21 07:20:53|2012-02-21 07:21:04|2605155691|2605244F433A01014E|LOG_000030573|SAVE WARM|2012-02-21 07:26:09|2012-02-21 07:30:24|2012-02-21 07:30:25|2012-02-21 07:30:41|2605326357|2605411689|   |<SID>_LOG                                                         |     85344|         0|         0|                                        |
    I am able to open and check this line in the file dbm.knl ; But, i am not getting why this error is occurring while opening the backup information from Maxdb. I am able to view the backup logs through LC10.
    Currently i am getting this error and when i am click on cancel (or ok) getting the blank page.  I am not able to view the backup logs form Maxdb.
    Please give me some hint to resolve this.
    Regards,
    Nagendra.

    Hi,
    Use below procedure
    1. Go to /sapdb/SRD/data/wrk
    2. cp -rp dbm_knl dbm_knl_OLD
    3. vi +<Line in which the corruption occured> dbm.knl
    see there must be a corruption in the given line and it will specified with a green color
    delete that part and make the format as per the above line
    4. save the file
    5. execute the procedure again from Database studio or Database Manager
    (Note: Make sure that you have taken the backup first of dbm.knl file Because any extra entry may cause another corruption)
    (FYI : This file is only log file of successful backups and returns the return-code)
    Regards,
    Paramvirsinh Jetawat
    SAP BASIS Consultant

  • Error while opening the BO report

    Dear Experts,
    Am getting following error while opening the reports through Xcelsius.You cannot amke a connection to the BusinessObjects web service ( LO 02010)
    Failed to get the document information. (LO 26315)
    Some objects are no longer available in the universe .See your BO admin ( Error : WIS 00001)
    Actually am the BO administrator , Yesterday I 've changed license key for Xcelsius and BO Enterprise...

    Hi ,
    You can view the following URl ,which may be helpful for you.
      Live office excel error
    -Thanks,

  • Getting error while opening Enterprise project type (EPT)

    Hello All,
    In Project Server 2013, I am getting error while opening any Enterprise project type (EPT) from EPT page or when I am trying ot create any new EPT. How can I troublshoot this, please help.
    Thanks in advance

    I searched ULS logs and got the below error details.
    Exception occured in method 'Workflow.ReadWorkflows' System.Data.NoNullAllowedException: Column 'WORKFLOW_ASSOCIATION_NAME' does not allow nulls.     at System.Data.DataColumn.CheckNullable(DataRow row)     at System.Data.DataColumn.CheckColumnConstraint(DataRow
    row, DataRowAction action)     at System.Data.DataTable.RaiseRowChanging(DataRowChangeEventArgs args, DataRow eRow, DataRowAction eAction, Boolean fireEvent)     at System.Data.DataTable.SetNewRecordWorker(DataRow row,
    Int32 proposedRecord, DataRowAction action, Boolean isInMerge, Boolean suppressEnsurePropertyChanged, Int32 position, Boolean fireEvent, Exception& deferredException)     at System.Data.DataTable.InsertRow(DataRow row, Int64 proposedID,
    Int32 pos, Boolean fireEvent)     at System.Data.DataTable....
    Let me know your advise on this.

  • Getting error while creating the variable of Schema Element type

    Hi everybody,
    For creating a variable of schema element type I am doing the following steps...
    Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
    IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
    What is mean by that.
    I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
    Thanks.

    Hi,
    I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
    [http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
    The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
    Regards,
    Nacho

  • Getting error while creating the Shopping cart.

    Hi ,
    I am getting error while creating the Shopping cart.
    a.Error in account assignment for item 1  (Item  Testing SC ) 
    b.Duplicates of Cost Centre T10063 are defined in SRM  (Item  Testing SC ) 
    Kindly provide the solutions.
    Thanks,
    Dev

    Try the following in the ERP backend system:
    Standard Hierarchy Inconsistencies
    Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
    Update from SAP Global support, the following was the email received:
    in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
    If you think that your standard hierarchy is inconsistent you can check that as following:
    Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
    Alternatively, you can run the report 'RKCORRH1' (TN SE38).
    Run both the Hierarchy->Master data->test and the
    Hierarchy->Master data->comparison.
    As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
    Once the above two are run, again when you go to test, the inconsistency disappears.

Maybe you are looking for

  • Why can't I download my old purchases?

    I had recently had my blackberry 9900 stolen so i switched back to my 9780 and when i logged back into my blackberry app world account it had olny shown the previously downloaded apps from this bold and not the one that was stolen even though they we

  • TS3274 My games won't play sound

    My iPad plays videos music but has no sound when I play a game. Went to menu on games and volume is on any ideas

  • Error in assigning string literal.......

    Hi, Below is a normal stub that i am executing DECLARE PI_PACKAGE_CLOB CLOB; BEGIN   PI_PACKAGE_CLOB := '<ROWSET><ROW><SITE_NO Key="Yes">1</SITE_NO><PACKAGE_NO Key="Yes">832</PACKAGE_NO><PARENT_PACKAGE_NO>0</PARENT_PACKAGE_NO><NAME>Testing - 1</NAME>

  • Help with waveform generation

    Hello, I have 2 waveforms and I'm trying to add one after another, (like an analogy of concatenation of characters). I was thinking to make a time offset of one waveform and then add them, but it didn't work well. I would appreciate some ideas. Thank

  • Consolidation Import failed

    Hi, I am trying to import my release on consolidation tab in CMS but the returned state is 'Import failed'. The error log is generated in step 'Repository-import'. The log is: Info:Starting Step Repository-import at 2007-05-21 08:35:13.0024 +7:00 Inf