Getting error while refreshing a Webi reports for a specific universe

Hi Experts I am trying to refresh a WEBI Report but getting this error: A database error occured.
The database error text is (cs)"Specified network layer is invalid" Previously this was working fine...
from today itself I am getting this error
My DB is DB2 DB Drivers: DB2 V9 ->JDBC Driver

Test Connection is always successful...
Not sure whats wrong

Similar Messages

Getting error while refreshing the Webi report

Hi Guys,
I am getting error, while refreshing Webi reports. Error like:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
Could anyone please reply.
Regards,

Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H

Getting error while schedule a webi report

Hi All,
I am getting error "A database error occured. The database error text is: The supplied XML is not valid. [Measures].[4KO5AOUTL3ZKE55WDDOMUB0AI]. (WIS 10901) " while scheduling a Webi report.
Could anyone help me regarding the error?
Regards

Hi Manoj,
Go to the controls tab in parameters in universe designer and there increase the "Limit size of result set to" and "limit execution time to".
Also in webi go to the edit query and increase the "maximum rows retrived" and "maximu retrievel time".
I think this should avoid partial results.
Thanks,
Neeraj

Reg: Error while refreshing the WebI Report

Hi all,
I created WebI report based on universe that is connected to Excel data. Through DSN I m accesing Excel Data . I created same DSN in server also. If I refresh the webI Report in BO server it tells the following error.
A database error occured. The database error text is: [Microsoft][ODBC Excel Driver] System resource exceeded.. (WIS 10901)
Before that its working fine. what may be the problem?
Regards,
Hemalatha J

This seems to be a data source not a BO problem. Take a look here:
http://social.msdn.microsoft.com/Forums/en-US/sqldataaccess/thread/05aaccd6-2a38-4784-b310-99e34b8d1a35
Regards,
STratos

Getting and MDX Error while refreshing a WEBI Report

Hi,
I have a problem in developing/refreshing my Webi Info view report.
I have my report like this.
It has 15 dimensions and 3 measures.
Purpose of the report is to display the purchase order details for a particular state/or all in a Country for a particular year.
In this scenario my database has two Calendar Years: 2011 and 2012.
And states (in US) as New York, Rhone Island etc..
Here comes the typical issue.
I have developed the report and when i m trying to refresh the report giving 2011 as Year and New York as State for prompts and generating the report.
Now i m getting the error of MDX query; Below is the error message:
"Database error: The MDX query SELECT { (Measures).[35LYTRYAVWK4BUTF5WL7PC9AR] } ON COLUMNS , NON EMPTY UNORDER( FILTER( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( { (0PLANT__0REGION).[US NY] } , { (ZIPO_ID__ZCALYEAR).[2011] } ), (0PLANT).[LEVEL01].MEMBERS ), (ZIPO_ID).[LEVEL01].MEMBERS ), (0PUR_GROUP).[LEVEL01].MEMBERS ), (ZIVENDOR).[LEVEL01].MEMBERS ), { (ZIPO_ID__ZIPRICING).[TIME & MATERIAL] } ), { (ZIPO_ID__ZISEGMNT).[ELECTRIC], (ZIPO_ID__ZISEGMNT).[GAS & ELECTRIC], (ZIPO_ID__ZISEGMNT).[GAS] } ), EXCEPT( { (ZIPO_ID__ZICLASS).[LEVEL01].MEMBERS } , { { (ZIPO_ID__ZICLASS).[STOCK] } } ) ), (0CONTRSTART).[LEVEL01].MEMBERS ), (0CONTREND).[LEVEL01].MEMBERS ), (ZIPO_ID__0ENTRY_DATE).[LEVEL01].MEMBERS ), (ZIPO_ID__ZIPOAPDAT).[LEVEL01].MEMBERS ), (Measures).[35LYTRYAVWK4BUTF5WL7PC9AR] > 100000) ) DIMENSION PROPERTIES MEMBER_NAME, MEMBER_CAPTION, (0CONTREND).[20CONTREND], (0CONTRSTART).[20CONTRSTART], (ZIPO_ID).[2ZIPO_ID], (ZIPO_ID__ZIPRICING).[1ZIPO_ID__ZIPRICING], (ZIPO_ID__ZIPRICING).[2ZIPO_ID__ZIPRICING], (ZIVENDOR).[20NAME], (ZIVENDOR).[2ZIVENDOR] ON ROWS FROM (ZSC_MPDTD/ZSC_MPDTD_QU0099) failed to execute with the error Please enter a valid value for characteristic 0PLANT__0REGION.. (IES 10901) (WIS 10901)"
This error is coming only when i m selecting 2011 and New York as prompt values.
When i m selecting any other value combinations, i dont get any error.
I m not sure why this error is coming.
Actually to say there is no data for the combination 2011 and New York. So ideally it has to display "No Data to Retrieve".
But this is not the case with these conditions.
Please suggset.
Thanks,
Prasad.

check the statement in transactions MDXTEST,
check [US NY] in 0REGION as the stament is using (0PLANT__0REGION).[US NY]

Getting error when refreshing the WebI report

Hi,
I am building WebI reports using a universe which is constructed over a BI cube.
Initially I am building the report and uploading it into CMS.
When I am importing the report from CMS and refreshing it, I am getting an error
"A database error has occured. The database error text is: A runtime exception has occured. (Lisence key check failed, Check that you are lisenced to access SAP data sources). (WIS 10901)".
What could be the reason for this kind of behaviour?
The version of BO is 3.1.

Hi,
Your answer was really helpful, and it worked upto some extent. I have updated the lisence key and the following error is no longer coming.
"(Lisence key check failed, Check that you are lisenced to access SAP data sources). (WIS 10901)".
But now I have a new error popping up when ever I import a report from CMS and refreshing it.
The error is "A database error occured. The database text is: The supplied XML is not valid.[SYMTNKEY].[LEVEL 01]. (WIS 10901)."

Error (IES10901) (WIS 10901) while refreshing the Webi report

Hi Gurus,
We have created webi reports using Universe design tool on top of BEX Query based on 0SD_C03 cube and now we are facing Database error: A runtime exception has occured. (Error loading cube 0sd_c03 (catalog : % 3). (IES 10901 ) (WIS 10901) while trying to refresh the Webi report from Data Access--> Edit--> Run Query while its running fine when I refresh the report using refresh button option in Webi.
When I run the the query in rsrt its working absolutely fine.
Note that we are using BOBJ 4.0 SP7 and this issue has come recently.
Any idea or help on this would be appreciated.
Regards,
Monil

Hello Monali,
are you getting this error constantly or sometimes?
what type of connection are you using for your Webi report
Is it Specified user name/password OLAP connection or SSO Olap connection
If your are using Specified user name/password OLAP then try with SSO connection because SAp recommendation is not to use Specified user name/password OLAP connections..to resolve this kind of issues please restart DSL bridge..
Regards,
Naveen D

Getting error when schedule a webi report

Hi All,
I am getting error "Cannot initialize Report Engine server. (Error: RWI 00226) Error: INF) while schedule a Webi report.
Could anyone help me regarding the error?
Regards

Hai
Check this Links
http://www.sap-forum.org/f22/smtp-error-when-scheduling-webi-report-t483/
http://www.businessobjectstips.com/tips/server/sizing-limits-to-web-intelligence-report-server-maximum-simultaneous-connections/

URL error while executing a web report in WAD

Hi,
When I execute a web report through the Web Application Designer, I get the following error:
The requested URL could not be retrieved
While trying to retrieve the URL: http://abcd.efghi.es:8000/sap/bw/BEx?
The following error was encountered:
Unable to determine IP address from host name for abcd.efghi.es
The dnsserver returned:
Name Error: The domain name does not exist.
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
But when I execute the web report with the IP of the machine http://123.456.7.893:8000/sap/bw/BEx?...........
I can execute my web report correctly.
I didn't find any options in the menu web template in order to modify the url generation.
Please help me to solve this problem.
Regards,
Rocio

You are not alone - Looks like SAP is also looking into this.
Web Application Designer Appearing in Unicode (UTF-8)

Error While Run the WebI Report on SAP BW Query

Hi
I have build the universe on SAP BW Query . I built the same universe on the SAP BW DEV and SAP BW Test
When I tried to run the WEBI Report on the Universe which is built on the SAP BW Test
WebI Report is prompting for the below values
Calendar Year
Profit Center
Profit Center Hierarchy
Version.
Here I can see the List of values for the Calendar Year and Profit Center. Its giving me below error when I look for list of values for the Profit Center and Profit Center Hierarchy.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions:
1.     Why I am getting this error. Because of authentication or configurations set on the Profit Center and Profit Center Hierarchy objects? If so , please let me know what I need to set?
When I tried to run the same WEBI Report on universe which build on SAP BW Dev Query. I can see list of values for the Calendar Year, Version, Profit Center, Profit Center Hierarchy.
But when I selected the values and tried to run the report. I got below error.
u2018Query 1 - P&L Structure Monthly_Devtst
Database error: [SOFA Driver] : The MDX query SELECT NON EMPTY HIERARCHIZE( {[Measures].[4CEX5LZ5571LCZHJBK0L0360P],[Measures].[4CEX5MM6Q2UPWV3VT27LU9261]} ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON COLUMNS , NON EMPTY HIERARCHIZE( { [0CALMONTH].[LEVEL00].MEMBERS } ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON ROWS FROM [ZFIGLPCBM/ZZFIGLPCBM04_Q011] SAP VARIABLES [!V000001] INCLUDING =[0PROFIT_CTR                   1000HCICONS08] [!V000002] INCLUDING =2 [!V000003] INCLUDING =2008 [!V000004] INCLUDING =000 failed to execute with the error Value "0000000002" for variable "Profit Center" is invalid. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions :
1.     What is this error? Please suggest the solution to run the report successfully.
Also I am attaching Print Screens of DEV and Test reports Prompts and Errors.
Here I am using Business Objects XI R2 SP4
I am sorry if I confused you with elaborated explanation, I have very less knowledge of BO and SAP BW ..
Please help me with your valuable suggestions.
Thanks,
Anitha

Hi Ingo,
- the BI Query in the Test system is running correct and all the variables do work ?
     Yes, BI Query is working fine in the Test System and I can see all the variables too
In BI Query I can see values for Calendar Year, Version, Profit Center, Profit Center Hierarchy
- the Universe has all the variables ?
Yes, Universe has all the variables.
- do you see values in the Web Intelligence prompts when you run the report ?
   No,
   I can only see values for the Calendar Year & Version in the Web Intelligence Prompt.
When I try to see values for the Profit Center & Profit Center Hierarchy in the Web Intelligence Prompt, its showing below error.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
I can send you the Print Screens of Prompts & Errors, but i don't know how to attach the file here.
Thanks,
Anitha

User is getting Error while opening a Discoverer report::Model Manipulation

Hi,
I am stuck with a peculaiar error as reported:
While opening a Discoverer Report its giving Error:
Model manipulation via state object.Server writes and pass through reads can only be made on objects attached to the model
instance of
oracle.disco.model.corbaserver.ScheduleRunWorkbookInfoImpl made state from:removed from
oracle.disco.model.corbaserver.schedule.ScheduleRunWorkbookInfoImpl
Kindly any help will be benefitial for me.
Thanks and Regards

Pl post details of OS, database and Discoverer versions. Pl detail the steps to replicate this error. This MOS Doc may be helpful
734850.1- Error "Failed to Find Workbook ParameterValue.." When Trying to Edit Scheduled Discoverer Workbooks
HTH
Srini

Getting error while writing JUnit test case for RestFul Services

Hi All,
I have written Restful services in Netbean 6.8.
It's running well...no issues.
{color:#0000ff}While writing JUnit test cases for them, I am getting following error:
{color}{color:#993300}Testcase: testGetAuthenticated(com.ct.services.LoginServicesTest): Caused an ERROR
Implementing class{color}
java.lang.IncompatibleClassChangeError: Implementing class
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
at org.eclipse.persistence.jpa.PersistenceProvider.createEntityManagerFactory(PersistenceProvider.java:160)
at org.eclipse.persistence.jpa.PersistenceProvider.createEntityManagerFactory(PersistenceProvider.java:65)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:52)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:34)
at com.ct.services.LoginServices.getAuthenticated(LoginServices.java:205)
at com.ct.services.LoginServicesTest.testGetAuthenticated(LoginServicesTest.java:84)
Test com.ct.services.LoginServicesTest FAILED
F:\NetbeanProjectsWorkspace\DemoProject\nbproject\build-impl.xml:972: Some tests failed; see details above.
BUILD FAILED (total time: 11 seconds)
{color:#0000ff}Strange thing is that when I am commenting below lines and its related calls:
{color}
{color:#ff0000}EntityManagerFactory mEmf = Persistence.createEntityManagerFactory("AnyName");
EntityManager mEm = mEmf.createEntityManager();
{color}
{color:#0000ff}from my code, JUnit test cases are working fine.
{color}Anybody having any idea about this ?
Thanks
Avi
Edited by: Avi007 on Aug 28, 2010 5:17 AM

Hi All,
[http://stackoverflow.com/questions/2778295/test-driven-development-problem]
Please refer the above link for the solution
Thanks
Avi
Edited by: Avi007 on Aug 30, 2010 12:33 AM

Reg: Error While Excueting the WebI Reports

Hi Experts ,
I have created a webi report , using the universe. therewith it fetch the data from the SAP-BW System ,before all the reports developed using webi works fine.
Its works good in BW.
But reports shows the error as follows in WebI.
Error text message from WebI
A database error occurred. The database error text is: The MDX query SELECT { [Measures].[D8B94SMNQTWLW7YBXHRQ29CIC], [Measures].[D8B94SMNQTVU7LMKLYC3ZTY8K], [Measures].[D8B94SMNQTV2IZATAEWHXEJYS], [Measures].[D8B94SMNQTUAUCZ1YVGVUZ5P0], [Measures].[D8B94SMNQTXDKUA3917C4OQS4] } ON COLUMNS , NON EMPTY {[0COMP_CODE].DEFAULTMEMBER} ON ROWS FROM [ZRPAC_M01/ZFI_REPAC_19_A] SAP VARIABLES [!V000003] INCLUDING [0CALMONTH].[200201] : [0CALMONTH].[200405] [!V000002] INCLUDING [0CALMONTH].[200303] : [0CALMONTH].[200504] [!V000001] INCLUDING [0COMP_CODE].[1100] failed to execute with the error Unknown error when executing MDX. (WIS 10901)
Thanks in Advance.

This seems to be a data source not a BO problem. Take a look here:
http://social.msdn.microsoft.com/Forums/en-US/sqldataaccess/thread/05aaccd6-2a38-4784-b310-99e34b8d1a35
Regards,
STratos

Getting Error while installing oracle web cache

Hi all,
after installation of Oracle 9i Application Server version 1.0.2.2.2 on Windows 2000(NT based), while installing oracle web cache on AS following error appears after 96% of installation. Origin oracle database 10g is running on a separate PC in local network.
Updating User List
Adding users to the cache
Adding users to the cache failed.
Reason: WTE-03501 Error updating list of users:
Export failed on origin database.
OCI error - ORA-28595: Extproc agent : Invalid DLL Path
ORA-06512: at "SYS.WTCSYS", line 3
ORA-06512: at "SYS.WTCSYS", line 66
ORA-06512: at line 1
can anyone please solve this problem.
thanks.
regards.
fahad ejaz
email:[email protected]

Hi Fahad,
I am sorry I am not sure what the solution to your issue is. However, I was wondering why you are not attempting to install Oracle 10g as opposed to 1.0.2.2.2?
I am guessng here but perhaps the 10g database is incompatible with a 1.0.2.2.2 install.
Hopefully someone else may be able to provide more useful feedback.
cheers
Nick

Getting Error while installing oracle web cach

Hi all,
after installation of Oracle 9i Application Server version 1.0.2.2.2 on Windows 2000(NT based), while installing oracle web cache on AS following error appears after 96% of installation. Origin oracle database 10g is running on a separate PC in local network.
Updating User List
Adding users to the cache
Adding users to the cache failed.
Reason: WTE-03501 Error updating list of users:
Export failed on origin database.
OCI error - ORA-28595: Extproc agent : Invalid DLL Path
ORA-06512: at "SYS.WTCSYS", line 3
ORA-06512: at "SYS.WTCSYS", line 66
ORA-06512: at line 1
can anyone please solve this problem.
thanks.
regards.
fahad ejaz
email:[email protected]

Hi Fahad,
I am sorry I am not sure what the solution to your issue is. However, I was wondering why you are not attempting to install Oracle 10g as opposed to 1.0.2.2.2?
I am guessng here but perhaps the 10g database is incompatible with a 1.0.2.2.2 install.
Hopefully someone else may be able to provide more useful feedback.
cheers
Nick

Getting error while refreshing a Webi reports for a specific universe

Similar Messages

Maybe you are looking for