Getting font problem for printing form in Production server.

Hi experts,
We are getting problem while printing form in production server. As it gives no problem in Quality server while printing the same, the print is fine. We applied packages from 26 to 28 level for version 4.7. When we moved this packages to Production server we got problem of font while printing the form for some of scripts. But the surprise is that in Quality server the print is fine, no problem at all.
Can any one suggest me on this issue.
Regards,
Sagun Desai.

Hi sagun,
Please check the spool request generated on production server using tcode SP01.
Goto dispaly spool request and check the spool.If the spool too displays your script correctly then there is a problem in printer connected to production server.
The printer connected to the test server might be rightly conffigured to print the output.Please check the settings of the printer connected to the production.
Hope this helps.
Regards,
Subodh

Similar Messages

Installing and Configuring Adobe Document Services For Print Forms

Hi,
I want to use Adobe Document Services,for Print Forms Scenario,on ABAP side.
I installed the Adobe document Services following the steps in the Installation Guide.I obtained the Credentials file and supplied it during installation.
Then i followed the steps in the configuration Guide,except for the SSL connection part, as i have chosen Basic Authentication .
The Web Service is running and on opening the home page,when i test the method rpData,it asks for Username and password,when i supply my username password it says, user does not have rights to method rpData.
I even tried using J2ee Admin rights,user with SAP_ALL rights, and ADS_AGENT.
When i test the service from ABAP side,using the RFC destination i created on Client 400,from where i want to use it, the test shows status code OK.
When i test a form through transaction SFP,it asks for USERNAME and password,which i tried as my USERID,ADMIN ID with SAP_ALL rights, even with the users i created during Configuration like ADS_AGENT, ADSUser etc.
Our J2ee Engine is installed on Client 200,i installed the ADS on Client 200 and created the users ADS_AGENt(service user with role SAP_BC_FP_ICF) and ADSuser on Client 200.
I also activated the ICF services and created the destination for the destination service using Visual Administrator.
My Issues:
1)To test the Webservice,what USER ID password needs to be supplied?Do i need some Special role or rights?
2)During Configuration ,when i create a USer in SAP Web AS ABAP for Basic Authetication,after creating ADSCallers Role and assigning to ADSUSer ,in Visual Administrator,after selecting com.adobe/AdobeDocumentServices*AdobeDocumentServicesAssembly.jar ,under ADSCallers,i ama ble to see the both the users ADSUser(user in j2ee Engine for basic authentication ), and ADSUSER (user type system in ABAP),are visible,
When try to add ADSUSEr by choosing ADD,from USER Tree , it doesn't do so.So i Added the ADScallers group instead,thus indirectly both users added.Can this be a Problem?
3)What else do i need to do?Am i missing something?
Please help.
Regards,
Siddhartha

Hi all,
I am having an issue in which my ecc could not use properly the ADS on the EP.
I could properly execute FP_PDF_TEST_00 from se38 transaction which gives the correct version no of ADS. Also I am able to get the correct version no by giving username and password at http://<J2EE_host>:<J2EE_port>/AdobeDocumentServices/Config which seems like the ADS is working properly in EP.
However when the abaper is trying to run his form using spf like ZFORM_VENDOR it is showing error like
" Error during activation Message no. EU837 "
Can you please shed some light on what all steps I need to check to ensure that ADS is working properly ?

SRM 7.0 - customizing for print forms

Hi gurus,
we want to use adobe forms for print forms.
In customizing we are able to switch from smartforms to adobe forms (sap note 1264423).
While we are encountering problem in configuring differents output actions for certain documents: i.e. print different forms on basis of a value of an attribute that belong to the business object. We follow IMG documentation (in T. SPRO: SAP Supplier relationship Management -> SRM Server -> Cross Application basic settings -> Set output Actions and output Format -> Condition-Dependent Document Output) but conditions-dependent forms are not getting printed.
Please help me solving this issue.
Luca

Any help on this?

Create a new rule for printing form to use in time statement form

Hello,
we need to print an information on time statement form in dependence of a special substitution. Is there any possibility to create a new rule for printing form to use in time statement form? I can't find any information about this.
Thanks for your help.
Regards,
Daniela

Yes, I've tried this, but I get the error message:
Form class TEDT can only be displayed with this editor.
What am I doing wrong? Do I have to create a customer form class and assign a customer time statement form?
Thanks for your information.
Regards,
Daniela

HP ePrint from excel add-in: Error while getting driver name for printer

Trying to use add-in for ePrint from excel/word I get, "error while getting driver name for printer \\...HP DesignJet 800PS 42 by HP," with an option to select "OK" and that same message repeats with each printer in our network, and then it doesn't allow me to print using the add-in. However, I can print normally to HP Go Web, open up Print and Share, then print it from there. This happens with excel and word. I have Office Suite 2007.

Hello modameister,
Sorry you are having issues with this printer and the ePrint add-on. There are a couple of questions I would like you to answer please.
1. What operating system are you using? (XP,VISTA,7,MAC OS X)
2. What and how much data are you trying to print?
3. Have you tried to copy and paste the data into a different application or tried using the snip it tool?
4. Are you receiving any .dll errors (mscms.dll)
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

URGENT printing roblems on PRODUCTIVE server

I have printers problem.
All in sp01 for all printers is in "waiting"(frontend unavailable)-this could be from jobs end sent to "locl"
or
(this is tested by me personally)"error"(Incorrect (SAPLPD reported error))when a simple printout of printers in "SPAD" is sent to a "named printer".
However when I test(check function in SPAD) this device with "error" I get no problem
Basically no printouts on production. What to do ?
This stands in log for mentioned simple printout:
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
SAPLPD has reported problems:
Most important attributes of spool request
Request number 8701
Request name LIST1S JOHN SAPMSPAD_TIN
Client 700
Owner TINA
Request attributes
Time created   2007111505541500
Remaining life +00007235850
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device JOHN
Default no. copies 1
Format X_65_255
Main print request characteristics
Spool request number 8701
Print request number 1
Print request attributes
Time created   2007111505541500
Output device JOHN
Format X_65_255
Character converter active when first problem occurred
No information available

Hi Tina,
Can you post the system log corresponding to these errors.
Regards,
Siddhesh

Problem with getting specified pages for printing

requested Sir,
I am sanjeev, presently working with adobe indesign for publishing.
i am working verious sets of master pages,
now have a problem go gate specific pages for print in the same software.
it shows saction name that i could not inditify
give me the message
(one or more of th pages specified are not valid page name)
so how gate the valid name of pages?
please slove my problem,
thanks
sanjeev

If your document has more than one section (sections are used to restart page numbering and similar tasks) you can identify the pages using either the logical name, which uses the section prefix and the "logical' page number which is the number that appears in the page marker, or you can use the absolute page number, which is the position in the document. You can set your preferences to display section or absolute page numbering in the Pages panel, too.
Unless you assigne some other prefix, sections are labeled as Section I, Section II and so on, and pages are designated by Section:Page# in the dialogs. If you want to use absolute page numbering in the dialog instead, you can add a + sign in front of the page number in the dialog: +6-+12 will be the sixth though twelf pages in your document, even if they are in different sections and carry the numbers vi - 4, for example.

Problems with Print Program of Production Order (CO03) !!

Hi all,
I have a question about Print program of Production Order. I created a new Order in CO01. Then, in CO03, I call Print Program ( menu Functions >> Print). At the first time, it printed a so-called original version. Later, when i printed it again, it informed me that just was a copy. Now, that's ok.
I made some modification of Print Program by copying and changing the code (let's call it Z_PSFCOBJL) and SAPScript form. However, When I call Print function in CO03 for that Order, it didn't show any changes which I made. What's wrong? I checked in the code by debug mode, the variable that I transfered to the form was correct with its value.
I think that because SAP just make a print copy so that it will not reflect any changes that I made to the program, right? Is there any way to overcome this because I don't want to create new Orders just for testing every modification?
Thank you in advance.

Hi MURUGESAN THANGATHURAI ,
Yes, I did assign the new program and new form for this before printing. But I wanna know if there is any way that allows me to view those changes I made?
When I change the code in Print Program, print-out includes this update (although it still informs me that is a copy version). But when I make changes in the SAPScript form (for example, adding a variable for display), it will not update this?
What's problem?
Thank you guys.

Font problem while printing russian characters

Hello,
I have a weird problem. When I print an exported crystal report document which has been exported by Crystal Reports for Eclipse 2.0 as PDF document, the printout misses a lot of russian characters. This area with the missing characters just stays blank, not even question marks or something similar is shown. It seems that the half of all characters of the document is not shown.
(But the document does not contain any missing characters when you just open it in Adobe Acrobat. You only see this behaviour when you print it. That's why we didn't recognize this error for a long time because we didn't print it but just opened it with Acrobat Reader)
I have an original document with russian characters which is saved as docx. When I export this document with MS Word to PDF and print this document, no characters are missing. So it's no printer problem.
There is a difference in both documents:
This document, where all characters work, has the following properties set in the font information tab:
Arial
   type: TrueType
   encoding: Ansi
   original font: ArialMT
   original font type:: TrueType
The document which has been created with Crystal Reports for Eclipse 2.0 just contains the following data:
Arial
   type: TrueType
   encoding: included
(I hope the right translation for this option set is "included" because my version of Adobe Acrobat is a non english version).
What exactly happened to this document. How can I solve this that russian fonts will be print correctly?
Regards,
Markus

By the way. I create the files in this way:
   private void createFile(String outFileName) {
      try {
         ByteArrayInputStream result = clientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
         File newFile = new File(outFileName);
         FileOutputStream output = new FileOutputStream(newFile);
         int bytesRead = 0;
         byte[] byteArray = new byte[10000];
         while ((bytesRead = result.read(byteArray)) != -1) {
            output.write(byteArray, 0, bytesRead);
         output.flush();
         output.close();
      } catch (Exception e) {
         e.printStackTrace();

Not able to get font style for some fonts

Hi,
I am getting font style(like regular, bold, italic etc) like this-
while (count < fontCount) {//loop , which iterate throgh used fonts.
 ATE::IFont currentFont = fontRefArray.Item(count);
 if (!currentFont.IsNull()) {
 FontRef fontRef = currentFont.GetRef();
 AIFontKey fontKey = NULL;
 result = sAIFont->FontKeyFromFont(fontRef, &fontKey);
 result = sAIFont->GetUserFontName(fontKey, fontname, 50);
 result = sAIFont->GetPostScriptFontName(fontKey, psname, 50);
 result = sAIFont->GetFontStyleName(fontKey, stylename, 50);
 result = sAIFont->GetFontFamilyUIName(fontKey, familyname, 50);
For some fonts(not all the fonts) , Style name is comming as empty string, however for other fonts its working. Not sure why its working for some fonts and not for others. Other font properties are coming fine for all fonts.
When its failing, result is not kNoErr, but i dont know that how to get the exact error?Please help me in this issue.
Regards,
Harsh

Hi A. Patterson,
Thanks for your suggestion.
I tried GetFontStyleUINameUnicode() also but its also returning the emply string for style name for some of the fonts only difference is that error is kNoErr for all fonts. May be there is some problem with those specific fonts(who knows? ). m keep digging this.
Regards,
Harsh

I have a Laserjet 2550L. When I try to print 2nd time get message "Waiting for printer to become ava

Laserjet 2550L being used with Mac OSX Lion 10.7.3. After turning on, it will print once. When trying to print a second time I get a message "waiting for printer to become available." I have to turn it off and then back on to get it to print again.

Hum. Let's uninstall with the 'scrubber option' like this:
1. Go to Applications/Hewlett Packard/ click on HP Uninstaller and click Continue
2. Highlight your device on the left pane
3. Hold the Ctrl, Opt and Cmd keys and click on Uninstall
4. There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
5. Click Continue and let it finish
Now, run a Software Update. This can be done by clicking the Apple in the top left of the screen then clicking Software Updates.
Next, let's reset the printing system:
Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Default tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Let me know how this works for you.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I keep getting a "waiting for printer to become available when trying to print on my Epson Photo Stylus 2400. It used to work.

I'm trying to print a .psd image from Photoshop CS5 using my Epson Photo Stylus 2400 printer. Yesterday, I downloaded a suggested upgrade and it hasn't worked since then. I used Time Machine and replaced the Epson utility with the old one. I then get a message:
Waiting for printer to become available...
and nothing happens. I need to be able to print!
I'm using Snow Leopard 10.6.8

Try Reset Printing System feature and then install the printer using Apples instructions from Mac Basics: Printing in OS X

Spry validation problem for long forms

I used the Spry Validation Widgets for my form validation. It
works great, BUT the problem is that if you have a very long form
and the user doesn’t fill in one of the top required fields,
it doesn’t scroll the browser back up to the required field,
or present a message next to the submit button telling the person
that not all required fields have been filled in. Nothing appears
to happen at all, which would be confusing to users. I added my own
message underneath the Submit button which reads "If this form does
not submit, check for required entries at the top of this page.*",
but is there a way to add an extra popup message that could appear
next to the Submit button instead? (I know that we can't mix the
Validate Form behavior with the Spry Validation widgets.)

Came across the same issue as well. To solve this I added in
three lines of code into the 'SpryValidationTextField.js' file that
is created via DW. Inside of that include look for the following
code:
if (!Spry.Widget.Form.validate) {
Spry.Widget.Form.validate = function(vform) {
var isValid = true;
var isElementValid = true;
var q = Spry.Widget.Form.onSubmitWidgetQueue;
var qlen = q.length;
for (var i = 0; i < qlen; i++) {
if (!q
.isDisabled() && q.form == vform) {
isElementValid = q
.validate();
isValid = isElementValid && isValid;
return isValid;
Right before you return the "isValid" parameter you want to
check and see if the value is false. If it is, have the page
refreshed to a specific html anchor. For example:
if (isValid == false) {
window.location.hash = "formtop";
return isValid;
Where "formtop" is would be the name of your html anchor tag
on the page. So right before my html form starts I have:
<a name="formtop"></a>
Hope that helps ... enjoy!
- Larry Daughenbaugh
http://www.jplprod.com

Can we please get some assistance for the Tap Chat product??

This is my second post about this matter, and yet no response at all. I bought the tap chat in hopes that it would actually work. But when I press it down, it opens up my task manager, as if I just pressed ctrl + delete. It will not work with vent, it doesnt even show up on the audio control panel for the headset. So what gives? Are your drivers not able to work on a windows 7 64-bit OS? A response from one of you guru's would be great!

Bustler, I already posted about this problem here: http://forums.creative.com/t5/Headphones-Headsets/WoW-SB-Tap-Chat-not-working-not-visible-in-Creativ...
The device is recognized by Windows just fine. The problem is that it's not showing up under the Creative Audio control panel. Of course Creative suppot doesn't even know the device exists so we have little support atm. I'm hoping that posting here will get this problem some visibility as calling support directly has resulted in blank stares (figuratively) from the support personell and no return calls after they have promised to research the issue and device.

Keep getting auto updates for printer which I no longer have.

I uninstalled my canon inkjet printer. At least I believe I did - it doesn't come up when I run a search on Finder. However I keep getting auto updates for it, which I would like to stop getting. I may be slow but can't figure out how to do this.... thanks.

Try going to the hard drive level Library/Printers and delete the Canon folder there.

Getting font problem for printing form in Production server.

Similar Messages

Maybe you are looking for