Getting "Insufficient # of client access lincenses" message
Nothing has been monkeyed with and all of a sudden I'm getting that message when I'm trying to send/receive in Entourage. Please help!
Sounds like an Entourage problem. I suggest you post your question on an Office forum and/or check Microsoft's knowledgebase at http://www.microsoft.com for info.
Similar Messages
-
I'm getting a "can't access icloud" message from all devices.
I'm getting a "can't access icloud" message from all devices. According to Apple the system isn't down. Any ideas? My password is correct.
A full reset fixed the problem.
-
I want to download WEATHERBUG to my apple air. Keep getting a 3rd party access error message. Can you help?
What is "Weatherbug" and where did you get it?
What is the exact, complete text of the error message, and when do you see it? -
I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.
For such situation, I'd suggest the following:
1. Remove current installed office with the fix-it tool in
KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
2. Either download a trial version of Office 2013 from
http://office.microsoft.com/, or from
http://technet.microsoft.com/en-us/evalcenter/jj937170
3. Reboot your computer in clean boot mode, and run setup again
Max Meng
TechNet Community Support -
I am trying to download the newest version of ITunes. When I try the download, it starts and after a bit the following message appears "The installer has insufficient priviledges to access this directory: C:\ProgramData\Microsoft\Start\Menu\Programs\ITunes The installation can not continue...."
Can someone please help?
Thanks,
I'm Always ConfusedB Noir --
I can't tell you how much I appreciate your taking the time to help me with this problem. I'm doing a healing technician training class at my church, and have most of my study material on my ipod. It cashed this weekend which hindered my preparation for my class tomorrow night. I went to the local "Apple Store" late last night and they could get me up and running. They suggested that I call the APL CARD line which I did today, but they gave me a nice run around seccession, and did nothing. Then I was lead to "Google" my question, which eventually lead me to the "Apple" site. Praise the LORD for your help and may you be richly blessed with multiplied blessings in all that you put your hands to do. May you receive a great harvest. As far as I'm concerned you were used by the LORD, and are the real genius!!!
Thanks
JimTalbot7 -
Trying to download ITunes latest version on my Windows XP and I get this message: "The installer has insufficient privileges to access this directory: C:\Program Files\ITunes. The installation cannot continue. Log on as administrator or contact your system administrator." HELP?
Hello PamelaFox14,
Thank you for using Apple Support Communities.
It sounds like you need to log in as the administrator to update the iTunes application properly.
Take a look at this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
This section in particular:
1. Make sure you have administrator account access
To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
Windows 7: How do I log on as an administrator?
Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
All the best,
Sterling -
I tried to reinstall Itunes so i can have my computer interact with my iPod Classic.I uninstalled all the previous programs per apple's instructions.Part way during the reinstallation an error message comes up: The installer has insufficient priviliges to access this directory: C\ProgramFiles[x86]\iTunes.
Installer cannot continue.Log on as administrator or contact your system administrator.
I am the administrator on this HP computer.Hello PamelaFox14,
Thank you for using Apple Support Communities.
It sounds like you need to log in as the administrator to update the iTunes application properly.
Take a look at this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
This section in particular:
1. Make sure you have administrator account access
To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
Windows 7: How do I log on as an administrator?
Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
All the best,
Sterling -
I am using windows 7 professional operating system. I am unable to update to itunes 10.7. I received this error message: The installer has insufficient priveleges to access this directory
Okay.
The message can also be consistent with disk/file damage.
The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I've had iTunes on my PC forever. Because recent updates have aborted with the message:"The installer has insufficient privileges to access this directory... Log on as administrator," I am now attempting to download a fresh copy from the Apple website. Same message! I am logged on as administrator. I can download, then attempt to run by right-clicking on the installer and selecting, "Run as administrator" but that gets me only to the same point (and message) as attempting to install directly from the internet. I've never seen this message with any other download. What gives?
What's the precise name of the directory being mentioned? (Give the full file path, please.)
-
Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?
Outlook 2013. Under Start Up Options, I have checked "Make Outlook the default program for E-mail, Contacts, and Calendar".
-
I am not able to open a PDF file that I just created. I get an access denied message instead.
Thanks for asking.
I was combining different types of files into a single PDF. Some of them were excel spreadsheets and I had set the print areas in each file. When I cleared the print area the problem stopped. So I am assuming that had something to do with it. Though I am not sure.
The strange thing was that I was able to open the excel source documents after creating the faulty PDF but some of the MS word source documents also had "access denied" status. I still cannot figure that part out. -
i can't update my itunes and it shows me this message: The installer has insufficient privileges to access this directory: C:/program files/itunes. The installation cannot continue. Log on as administrator or contact your system administrator
Hello PamelaFox14,
Thank you for using Apple Support Communities.
It sounds like you need to log in as the administrator to update the iTunes application properly.
Take a look at this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
This section in particular:
1. Make sure you have administrator account access
To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
Windows 7: How do I log on as an administrator?
Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
All the best,
Sterling -
Can't install latest itunes. error msg: "This installer has insufficient priviliges to access this directory: C:\ProgramData\Microsoft\Windows\StartMenu\Programs\ITunes. Log on as administrator or contact your system administrator." I am logged on as administrator and have been since i've owned this laptop. Any suggestions?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.
unfortunately the do_not_trust certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]] -
Getting insufficient credit message even though or...
I am getting insufficient credit message even though order is delivered and renewal is on 1st Mar 2015. I have subscribed to India 800mins monthly from Japan. The order for March has already been delivered on 26th Feb. Renewal date is on 1st March. Then why am I not able to call a mobile number in India. Please check.This is causing unnecessary harassment.
I am going to report this as a fraud if the issue is not resolved.I have not received any reply till now.
Maybe you are looking for
-
Is there a way to transfer music from my iPod to my computer?
I need to update my iPod 4 but I have a lot of music on it I don't want to lose. And the computer that the music was on got reset. So is there a way to transfer the music from my iPod to my computer?
-
How can I compress an audio sample?
Hi, I have raw audio sample in a byte array. I want to compress this sample. more specifically, I want to develop a method which will take this byte array as an input and returns the compressed sample in the byte array again. Please suggest me if any
-
Problem with field-symbols usage
Hi guys, I am trying to read a record of table gi_outtab as follows: read table gi_outtab into wa_outtab index wa_ir2_data_changed-row_id. And now i want the value of a field of wa_outtab and this field is contained in a field-symbol <field> . I thou
-
Unable to open a new DB environment on PQ3
I'm trying to create a new environment on PQ3 processor. The same code worked in x86. The result is like this: function db_env->create succeeds, then function db_env->open 1) creates files __db.001 and __db.002 2) remains stuck for less than 1min 3)
-
My Inbox - Task Facade not implemented for provider
Hi Fiori experts, I have done the steps necessary to configure the "My Inbox" app. 1) Assign the service to the Backend 2) Activate the app in sicf 3) Assign the role catalog 4) Create the group and add the My Inbox app But the thing is that I am get