Getting Issue while uploading CSV file into internal table

Hi,
CSV file Data format as below
     a             b               c              d           e               f
2.01E14     29-Sep-08     13:44:19     2.01E14     SELL     T+1
actual values of column   A is 201000000000000
                 and columen D is 201000000035690
I am uploading above said CSV file into internal table using
the below coding:
TYPES: BEGIN OF TY_INTERN.
        INCLUDE STRUCTURE KCDE_CELLS.
TYPES: END OF TY_INTERN.
CALL FUNCTION 'KCD_CSV_FILE_TO_INTERN_CONVERT'
    EXPORTING
      I_FILENAME      = P_FILE
      I_SEPARATOR     = ','
    TABLES
      E_INTERN        = T_INTERN
    EXCEPTIONS
      UPLOAD_CSV      = 1
      UPLOAD_FILETYPE = 2
      OTHERS          = 3.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
am getting all columns data into internal table,
getting problem is columan A & D. am getting values into internal table for both; 2.01E+14. How to get actual values without modifying the csv file format.
waiting for your reply...
thanks & regards,
abhi

Hi Saurabh,
Thanks for your reply.
even i can't double click on those columns.
b'se the program needs be executed in background there can lot of csv file in one folder. No manual interaction on those csv files.
regards,
abhi

Similar Messages

Uploading CSV file into internal table

Hi,
I want to upload a CSV file into internal table.The flat file is having values as below:
'AAAAA','2003-10-11 07:52:37','167','Argentina',NULL,NULL,NULL,NULL,NULL,'MX1',NULL,NULL,'AAAA BBBB',NULL,NULL,NULL,'1',NULL,NULL,'AR ',NULL,NULL,NULL,'ARGENT','M1V','MX1',NULL,NULL,'F','F','F','F','F',NULL,'1',NULL,'MX','MMI ',NULL
'jklhg','2004-06-25 08:01:57','456','hjllajsdk','MANAGUA ',NULL,NULL,'265-5139','266-5136 al 38','MX1',NULL,NULL,'hjgkid GRÖBER','sdfsdf dfs asdfsdf 380 ad ased,','200 as ads, sfd sfd abajao y 50 m al sdf',NULL,'1',NULL,NULL,'NI ',NULL,NULL,NULL,'sdfdfg','M1V','dds',NULL,NULL,
Here I can not even split at ',' because some of the values are having value like NULL and some have values with comma too,
The delimiter is a quote and the separator is a comma here.
Can anyone help on this?
Thanks.
Edited by: Ginger on Jun 29, 2009 9:08 AM

As long as there can be a comma in a text literal you are right that the spilt command doesn't help. However there is one possibility how to attack this under one assumption:
- A comma outside a text delimiter is always considered a separator
- A comma inside a text delimiter is always considered a comma as part of the text
You have to read you file line by line and then travel along the line string character by character and setting a flag or counter for the text delimiters:
e.g.
"Text","Text1, Text2",NULL,NULL,"Text"
String Index 1: EQ " => lv_delimiter = 'X'
String Index 2: EQ T => text literal (because lv_delimiter = 'X')
String Index 3: EQ e => text literal (because lv_delimiter = 'X')
String Index 4: EQ x => text literal (because lv_delimiter = 'X')
String Index 5: EQ t => text literal (because lv_delimiter = 'X')
String Index 6: EQ " => lv_delimiter = ' ' (because it was 'X' before)
String Index 7: EQ , => This is a separator because lv_delimiter = ' '
String Index 8: EQ " => lv_delimiter = 'X' (because it was ' ' before)
String Index 9: EQ T => text literal (because lv_delimiter = 'X')
String Index 10: EQ e => text literal (because lv_delimiter = 'X')
String Index 11: EQ x => text literal (because lv_delimiter = 'X')
String Index 12: EQ t => text literal (because lv_delimiter = 'X')
String Index 13: EQ 1 => text literal (because lv_delimiter = 'X')
String Index 14: EQ , => text literal (because lv_delimiter = 'X')
String Index 15: EQ T => text literal (because lv_delimiter = 'X')
Whenever you hit a 'real' separator (lv_delimiter = ' ') you pass the value of the string before that up to the previous separator into the next structure field.
This is not an easy way to do it, but if you might have commas in your text literal and NULL values I gues it is probably the only way to go.
Hope that helps,
Michael

Issue while uploading .TIFF file into Standard text using RSTXLDMC

Hi All,
We are facing issues while uploading .TIFF file into standard text through program RSTXLDMC.
Getting the following error.
TIFF format error: No baseline TIFF 6.0 file.
The image is a colored one.
Please provide me solution if anyone has worked in this area.
Thanks in Advance,
Anand Raj Kuruba.

Hi,
Often this error occurs because the TIFF file you have has been saved with some form of compression. You need to open in a picture edit program and save as TIFF making sure options are set so there is no compression.
Andrew

Question about reading csv file into internal table

Some one (thanks those nice guys!) in this forum have suggested me to use FM KCD_CSV_FILE_TO_INTERN_CONVERT to read csv file into internal table. However, it can be used to read a local file only.
I would like to ask how can I read a CSV file into internal table from files in application server?
I can't simply use SPLIT as there may be comma in the content. e.g.
"abc","aaa,ab",10,"bbc"
My expected output:
abc
aaa,ab
10
bbb
Thanks again for your help.

Hi Gundam,
Try this code. I have made a custom parser to read the details in the record and split them accordingly. I have also tested them with your provided test cases and it work fine.
OPEN DATASET dsn FOR input IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET dsn INTO record.
PERFORM parser USING record.
ENDDO.
*DATA str(32) VALUE '"abc",10,"aaa,ab","bbc"'.
*DATA str(32) VALUE '"abc","aaa,ab",10,"bbc"'.
*DATA str(32) VALUE '"a,bc","aaaab",10,"bbc"'.
*DATA str(32) VALUE '"abc","aaa,ab",10,"b,bc"'.
*DATA str(32) VALUE '"abc","aaaab",10,"bbc"'.
FORM parser USING str.
DATA field(12).
DATA field1(12).
DATA field2(12).
DATA field3(12).
DATA field4(12).
DATA cnt TYPE i.
DATA len TYPE i.
DATA temp TYPE i.
DATA start TYPE i.
DATA quote TYPE i.
DATA rec_cnt TYPE i.
len = strlen( str ).
cnt = 0.
temp = 0.
rec_cnt = 0.
DO.
* Start at the beginning
IF start EQ 0.
    "string just ENDED start new one.
    start = 1.
    quote = 0.
    CLEAR field.
ENDIF.
IF str+cnt(1) EQ '"'. "Check for qoutes
    "CHECK IF quotes is already set
    IF quote = 1.
      "Already quotes set
      "Start new field
      start = 0.
      quote = 0.
      CONCATENATE field '"' INTO field.
      IF field IS NOT INITIAL.
        rec_cnt = rec_cnt + 1.
        CONDENSE field.
        IF rec_cnt EQ 1.
          field1 = field.
        ELSEIF rec_cnt EQ 2.
          field2 = field.
        ELSEIF rec_cnt EQ 3.
          field3 = field.
        ELSEIF rec_cnt EQ 4.
          field4 = field.
        ENDIF.
      ENDIF.
*      WRITE field.
    ELSE.
      "This is the start of quotes
      quote = 1.
    ENDIF.
ENDIF.
IF str+cnt(1) EQ ','. "Check end of field
    IF quote EQ 0. "This is not inside quote end of field
      start = 0.
      quote = 0.
      CONDENSE field.
*      WRITE field.
      IF field IS NOT INITIAL.
        rec_cnt = rec_cnt + 1.
        IF rec_cnt EQ 1.
          field1 = field.
        ELSEIF rec_cnt EQ 2.
          field2 = field.
        ELSEIF rec_cnt EQ 3.
          field3 = field.
        ELSEIF rec_cnt EQ 4.
          field4 = field.
        ENDIF.
      ENDIF.
    ENDIF.
ENDIF.
CONCATENATE field str+cnt(1) INTO field.
cnt = cnt + 1.
IF cnt GE len.
    EXIT.
ENDIF.
ENDDO.
WRITE: field1, field2, field3, field4.
ENDFORM.
Regards,
Wenceslaus.

Uploading excel file into internal table

Hi,
Any function module is there to upload an excel file into internal table in CRM 7.0 system?
Thanks.

Hi Ginger,
If u have access to ECC R/3 make use FM 'TEXT_CONVERT_XLS_TO_SAP' source code which is existing to convert to Excel to Internal table. It will work in CRM also.
As of Now I don't have access to SAP S/m. Mean while u can try as above said.
Regards,
Lokesh B

How to get data of tabulated text file into internal table

hi all,
i want to get data from tabulated text file(notepad) into internal table. i searched in SCN and got lot of post regarding how to convert excel file into internal table but i didnt get posts regarding text file.
thanks
SAchin

try:
DATA: BEGIN OF tabulator,
x(1) TYPE x VALUE '09',
END OF tabulator.
READ DATASET file INTO wa.
split wa at tabulator into table itab.
A.

Program to upload csv file to internal table and insert into database table

Hi I'm writing a program where I need to upload a csv file into an internal table using gui_upload, but i also need this program to insert the data into my custom database table using the split command. Anybody have any samples to help, its urgent!

Hi,
Check this table may be it will give u an hint...
REPORT z_table_upload LINE-SIZE 255.
Data
DATA: it_dd03p TYPE TABLE OF dd03p,
      is_dd03p TYPE dd03p.
DATA: it_rdata TYPE TABLE OF text1024,
      is_rdata TYPE text1024.
DATA: it_fields TYPE TABLE OF fieldname.
DATA: it_file TYPE REF TO data,
      is_file TYPE REF TO data.
DATA: w_error TYPE text132.
Macros
DEFINE write_error.
concatenate 'Error: table'
              p_table
              &1
              &2
         into w_error
         separated by space.
condense w_error.
write: / w_error.
stop.
END-OF-DEFINITION.
Field symbols
FIELD-SYMBOLS: <table> TYPE STANDARD TABLE,
               <data> TYPE ANY,
               <fs>    TYPE ANY.
Selection screen
SELECTION-SCREEN: BEGIN OF BLOCK b01 WITH FRAME TITLE text-b01.
PARAMETERS: p_file TYPE localfile DEFAULT 'C:\temp\' OBLIGATORY,
            p_separ TYPE c DEFAULT ';' OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK b01.
SELECTION-SCREEN: BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
PARAMETERS: p_table TYPE tabname OBLIGATORY
                                 MEMORY ID dtb
                                 MATCHCODE OBJECT dd_dbtb_16.
SELECTION-SCREEN: END OF BLOCK b02.
SELECTION-SCREEN: BEGIN OF BLOCK b03 WITH FRAME TITLE text-b03.
PARAMETERS: p_create TYPE c AS CHECKBOX.
SELECTION-SCREEN: END OF BLOCK b03,
                  SKIP.
SELECTION-SCREEN: BEGIN OF BLOCK b04 WITH FRAME TITLE text-b04.
PARAMETERS: p_nodb RADIOBUTTON GROUP g1 DEFAULT 'X'
                               USER-COMMAND rg1,
            p_save RADIOBUTTON GROUP g1,
            p_dele RADIOBUTTON GROUP g1.
SELECTION-SCREEN: SKIP.
PARAMETERS: p_test TYPE c AS CHECKBOX,
            p_list TYPE c AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN: END OF BLOCK b04.
At selection screen
AT SELECTION-SCREEN.
IF sy-ucomm = 'RG1'.
    IF p_nodb IS INITIAL.
      p_test = 'X'.
    ENDIF.
ENDIF.
At selection screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            field_name = 'P_FILE'
       IMPORTING
            file_name = p_file.
Start of selection
START-OF-SELECTION.
PERFORM f_table_definition USING p_table.
PERFORM f_upload_data USING p_file.
PERFORM f_prepare_table USING p_table.
PERFORM f_process_data.
IF p_nodb IS INITIAL.
    PERFORM f_modify_table.
ENDIF.
IF p_list = 'X'.
    PERFORM f_list_records.
ENDIF.
End of selection
END-OF-SELECTION.
      FORM f_table_definition                                       *
--> VALUE(IN_TABLE)                                               *
FORM f_table_definition USING value(in_table).
DATA: l_tname TYPE tabname,
        l_state TYPE ddgotstate,
        l_dd02v TYPE dd02v.
l_tname = in_table.
CALL FUNCTION 'DDIF_TABL_GET'
       EXPORTING
            name          = l_tname
       IMPORTING
            gotstate      = l_state
            dd02v_wa      = l_dd02v
       TABLES
            dd03p_tab     = it_dd03p
       EXCEPTIONS
            illegal_input = 1
            OTHERS        = 2.
IF l_state NE 'A'.
    write_error 'does not exist or is not active' space.
ENDIF.
IF l_dd02v-tabclass NE 'TRANSP' AND
     l_dd02v-tabclass NE 'CLUSTER'.
    write_error 'is type' l_dd02v-tabclass.
ENDIF.
ENDFORM.
      FORM f_prepare_table                                          *
--> VALUE(IN_TABLE)                                               *
FORM f_prepare_table USING value(in_table).
DATA: l_tname TYPE tabname,
        lt_ftab TYPE lvc_t_fcat.
l_tname = in_table.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
            i_structure_name = l_tname
       CHANGING
            ct_fieldcat      = lt_ftab
       EXCEPTIONS
            OTHERS           = 1.
IF sy-subrc NE 0.
    WRITE: / 'Error while building field catalog'.
    STOP.
ENDIF.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = lt_ftab
    IMPORTING
      ep_table        = it_file.
ASSIGN it_file->* TO <table>.
CREATE DATA is_file LIKE LINE OF <table>.
ASSIGN is_file->* TO <data>.
ENDFORM.
      FORM f_upload_data                                            *
--> VALUE(IN_FILE)                                                *
FORM f_upload_data USING value(in_file).
DATA: l_file    TYPE string,
        l_ltext   TYPE string.
DATA: l_lengt   TYPE i,
        l_field   TYPE fieldname.
DATA: l_missk   TYPE c.
l_file = in_file.
l_lengt = strlen( in_file ).
FORMAT INTENSIFIED ON.
WRITE: / 'Reading file', in_file(l_lengt).
CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
            filename = l_file
            filetype = 'ASC'
       TABLES
            data_tab = it_rdata
       EXCEPTIONS
            OTHERS   = 1.
IF sy-subrc <> 0.
    WRITE: /3 'Error uploading', l_file.
    STOP.
ENDIF.
File not empty
DESCRIBE TABLE it_rdata LINES sy-tmaxl.
IF sy-tmaxl = 0.
    WRITE: /3 'File', l_file, 'is empty'.
    STOP.
ELSE.
    WRITE: '-', sy-tmaxl, 'rows read'.
ENDIF.
File header on first row
READ TABLE it_rdata INTO is_rdata INDEX 1.
l_ltext = is_rdata.
WHILE l_ltext CS p_separ.
    SPLIT l_ltext AT p_separ INTO l_field l_ltext.
    APPEND l_field TO it_fields.
ENDWHILE.
IF sy-subrc = 0.
    l_field = l_ltext.
    APPEND l_field TO it_fields.
ENDIF.
Check all key fields are present
SKIP.
FORMAT RESET.
FORMAT COLOR COL_HEADING.
WRITE: /3 'Key fields'.
FORMAT RESET.
LOOP AT it_dd03p INTO is_dd03p WHERE NOT keyflag IS initial.
    WRITE: /3 is_dd03p-fieldname.
    READ TABLE it_fields WITH KEY table_line = is_dd03p-fieldname
                         TRANSPORTING NO FIELDS.
    IF sy-subrc = 0.
      FORMAT COLOR COL_POSITIVE.
      WRITE: 'ok'.
      FORMAT RESET.
    ELSEIF is_dd03p-datatype NE 'CLNT'.
      FORMAT COLOR COL_NEGATIVE.
      WRITE: 'error'.
      FORMAT RESET.
      l_missk = 'X'.
    ENDIF.
ENDLOOP.
Log other fields
SKIP.
FORMAT COLOR COL_HEADING.
WRITE: /3 'Other fields'.
FORMAT RESET.
LOOP AT it_dd03p INTO is_dd03p WHERE keyflag IS initial.
    WRITE: /3 is_dd03p-fieldname.
    READ TABLE it_fields WITH KEY table_line = is_dd03p-fieldname
                         TRANSPORTING NO FIELDS.
    IF sy-subrc = 0.
      WRITE: 'X'.
    ENDIF.
ENDLOOP.
Missing key field
IF l_missk = 'X'.
    SKIP.
    WRITE: /3 'Missing key fields - no further processing'.
    STOP.
ENDIF.
ENDFORM.
      FORM f_process_data                                           *
FORM f_process_data.
DATA: l_ltext TYPE string,
        l_stext TYPE text40,
        l_field TYPE fieldname,
        l_datat TYPE c.
LOOP AT it_rdata INTO is_rdata FROM 2.
    l_ltext = is_rdata.
    LOOP AT it_fields INTO l_field.
      ASSIGN COMPONENT l_field OF STRUCTURE <data> TO <fs>.
      IF sy-subrc = 0.
      Field value comes from file, determine conversion
        DESCRIBE FIELD <fs> TYPE l_datat.
        CASE l_datat.
          WHEN 'N'.
            SPLIT l_ltext AT p_separ INTO l_stext l_ltext.
            WRITE l_stext TO <fs> RIGHT-JUSTIFIED.
            OVERLAY <fs> WITH '0000000000000000'.           "max 16
          WHEN 'P'.
            SPLIT l_ltext AT p_separ INTO l_stext l_ltext.
            TRANSLATE l_stext USING ',.'.
            <fs> = l_stext.
          WHEN 'F'.
            SPLIT l_ltext AT p_separ INTO l_stext l_ltext.
            TRANSLATE l_stext USING ',.'.
            <fs> = l_stext.
          WHEN 'D'.
            SPLIT l_ltext AT p_separ INTO l_stext l_ltext.
            TRANSLATE l_stext USING '/.-.'.
            CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
                 EXPORTING
                      date_external = l_stext
                 IMPORTING
                      date_internal = <fs>
                 EXCEPTIONS
                      OTHERS        = 1.
          WHEN 'T'.
            CALL FUNCTION 'CONVERT_TIME_INPUT'
                 EXPORTING
                      input = l_stext
                 IMPORTING
                      output = <fs>
                 EXCEPTIONS
                      OTHERS = 1.
          WHEN OTHERS.
            SPLIT l_ltext AT p_separ INTO <fs> l_ltext.
        ENDCASE.
      ELSE.
        SHIFT l_ltext UP TO p_separ.
        SHIFT l_ltext.
      ENDIF.
    ENDLOOP.
    IF NOT <data> IS INITIAL.
      LOOP AT it_dd03p INTO is_dd03p WHERE datatype = 'CLNT'.
      This field is mandant
        ASSIGN COMPONENT is_dd03p-fieldname OF STRUCTURE <data>
                                                      TO <fs>.
        <fs> = sy-mandt.
      ENDLOOP.
      IF p_create = 'X'.
        IF is_dd03p-rollname = 'ERDAT'.
          ASSIGN COMPONENT is_dd03p-fieldname OF STRUCTURE <data>
                                                        TO <fs>.
          <fs> = sy-datum.
        ENDIF.
        IF is_dd03p-rollname = 'ERZET'.
          ASSIGN COMPONENT is_dd03p-fieldname OF STRUCTURE <data>
                                                        TO <fs>.
          <fs> = sy-uzeit.
        ENDIF.
        IF is_dd03p-rollname = 'ERNAM'.
          ASSIGN COMPONENT is_dd03p-fieldname OF STRUCTURE <data>
                                                        TO <fs>.
          <fs> = sy-uname.
        ENDIF.
      ENDIF.
      IF is_dd03p-rollname = 'AEDAT'.
        ASSIGN COMPONENT is_dd03p-fieldname OF STRUCTURE <data>
                                                      TO <fs>.
        <fs> = sy-datum.
      ENDIF.
      IF is_dd03p-rollname = 'AETIM'.
        ASSIGN COMPONENT is_dd03p-fieldname OF STRUCTURE <data>
                                                      TO <fs>.
        <fs> = sy-uzeit.
      ENDIF.
      IF is_dd03p-rollname = 'AENAM'.
        ASSIGN COMPONENT is_dd03p-fieldname OF STRUCTURE <data>
                                                      TO <fs>.
        <fs> = sy-uname.
      ENDIF.
      APPEND <data> TO <table>.
    ENDIF.
ENDLOOP.
ENDFORM.
      FORM f_modify_table                                           *
FORM f_modify_table.
SKIP.
IF p_save = 'X'.
    MODIFY (p_table) FROM TABLE <table>.
ELSEIF p_dele = 'X'.
    DELETE (p_table) FROM TABLE <table>.
ELSE.
    EXIT.
ENDIF.
IF sy-subrc EQ 0.
    FORMAT COLOR COL_POSITIVE.
    IF p_save = 'X'.
      WRITE: /3 'Modify table OK'.
    ELSE.
      WRITE: /3 'Delete table OK'.
    ENDIF.
    FORMAT RESET.
    IF p_test IS INITIAL.
      COMMIT WORK.
    ELSE.
      ROLLBACK WORK.
      WRITE: '- test only, no update'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE.
    WRITE: /3 'Error while modifying table'.
    FORMAT RESET.
ENDIF.
ENDFORM.
      FORM f_list_records                                           *
FORM f_list_records.
DATA: l_tleng TYPE i,
        l_lasti TYPE i,
        l_offst TYPE i.
Output width
l_tleng = 1.
LOOP AT it_dd03p INTO is_dd03p.
    l_tleng = l_tleng + is_dd03p-outputlen.
    IF l_tleng LT sy-linsz.
      l_lasti = sy-tabix.
      l_tleng = l_tleng + 1.
    ELSE.
      l_tleng = l_tleng - is_dd03p-outputlen.
      EXIT.
    ENDIF.
ENDLOOP.
Output header
SKIP.
FORMAT COLOR COL_HEADING.
WRITE: /3 'Contents'.
FORMAT RESET.
ULINE AT /3(l_tleng).
Output records
LOOP AT <table> ASSIGNING <data>.
    LOOP AT it_dd03p INTO is_dd03p FROM 1 TO l_lasti.
      IF is_dd03p-position = 1.
        WRITE: /3 sy-vline.
        l_offst = 3.
      ENDIF.
      ASSIGN COMPONENT is_dd03p-fieldname OF STRUCTURE <data> TO <fs>.
      l_offst = l_offst + 1.
      IF is_dd03p-decimals LE 2.
        WRITE: AT l_offst <fs>.
      ELSE.
        WRITE: AT l_offst <fs> DECIMALS 3.
      ENDIF.
      l_offst = l_offst + is_dd03p-outputlen.
      WRITE: AT l_offst sy-vline.
    ENDLOOP.
ENDLOOP.
Ouptut end
ULINE AT /3(l_tleng).
ENDFORM.
Regards,
Joy.

Uploading excel file into internal table with field length more than 255

I am trying to upload the data from an excel file through function module 'TEXT_CONVERT_XLS_TO_SAP'.
I have tested by changing the field type from string, and char2000.
But it is accepting only 255 chars from the cell content.
How to get the total content of the field if it is more than 255 char.

hi,
you can use any of the following procedures:
For uploading data from excel to internal table refer standard report RC1TCG3Z in se38 :
                                           or
You can use the FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' itself. Please check if you have done it this way . But, this FM can be a little time consuming if the excel has large data, so you can use the FM u2018GUI_UPLOADu2019.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
        EXPORTING
          filename                = p_file1
          i_begin_col          = l_b1
          i_begin_row        = l_c1
         i_end_col               = l_b2
         i_end_row             = l_c2
       TABLES
          intern                  = lt_data
        EXCEPTIONS
         inconsistent_parameters = 1
        upload_ole              = 2
          OTHERS                  = 3.
      IF sy-subrc <> 0.
        MESSAGE e018 DISPLAY LIKE 'i'.
     ENDIF.
*---Removing the first heading fields from the file.
      IF NOT lt_data[] IS INITIAL.
        LOOP AT lt_data INTO lwa_data WHERE row = '0001'.
          DELETE lt_data.
          CLEAR lwa_data.
        ENDLOOP.
*---Inserting the data from file the internal table
        LOOP AT lt_data INTO lwa_data.
          CASE lwa_data-col.
            WHEN 1.
              wa_file_wicopa-serial = lwa_data-value.
            WHEN 2.
              wa_file_wicopa-blart = lwa_data-value.
            WHEN 3.
              wa_file_wicopa-bldat = lwa_data-value.
            WHEN 4.
              wa_file_wicopa-budat = lwa_data-value.
          ENDCASE.
          AT END OF row.
            APPEND wa_file_wicopa TO gt_file_wicopa.
            CLEAR wa_file_wicopa.
          ENDAT.
          CLEAR lwa_data.
        ENDLOOP.
      ENDIF.
    ENDIF.
                                            or
DATA: it_test TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE.
DATA :v_start_col TYPE i VALUE '1',
      v_start_row TYPE i VALUE '1',
      v_end_col TYPE i VALUE '256',
      v_end_row TYPE i VALUE '65536',
      v_text TYPE repti.
* Funtion Module to upload values from excel to the Internal table
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = p_file
      i_begin_col             = v_start_col
      i_begin_row             = v_start_row
      i_end_col               = v_end_col
      i_end_row               = v_end_row
    TABLES
      intern                  = it_test
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
                         Or
You can use FM u201CTEXT_CONVERT_XLS_TO_SAPu201D.
DATA : i_raw TYPE truxs_t_text_data.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_field_seperator          = 'X'
      i_tab_raw_data             = i_raw
      i_filename                 = p_path
    TABLES
      i_tab_converted_data       = itab
EXCEPTIONS
   conversion_failed          = 1
   OTHERS                     = 2
hope it will help u
regards
rahul

Error converting CSV file into internal table

Hi,
I have to convert a large CSV file (>20.000 entries) into an internal table. I used FM GUI_UPLOAD to get a raw data table then convert this table using FM TEXT_CONVERT_CSV_TO_SAP.
But this does not seem to work properly: after 16.000 or so, the FM seems stuck as if in an endless loop.
Note that if I split the CSV file in several parts, the conversion runs successfully.
Is there any memory limit with this FM ?
Thanks,
Florian

Florian Labrouche,
Instead of using two function modules, you can use 'TEXT_CONVERT_XLS_TO_SAP' function module once by specifying file name in that function module itself. It does not take much time.
Check the sample program.
report zvenkat-upload-xl no standard page heading.
"Declarations.
"types
types:
      begin of t_bank_det,
        pernr(8) type c,
        bnksa(4) type c,
        zlsch(1) type c,
        bkplz(10) type c,
        bkort(25) type c,
        bankn(18) type c,
      end of t_bank_det.
"work areas
data:
      w_bank_det type t_bank_det.
"internal tables
data:
      i_bank_det type table of t_bank_det.
" selection-screen
selection-screen begin of block b1 with frame title text_001.
parameters p_file type localfile.
selection-screen end of block b1.
"At selection-screen on value-request for p_file.
at selection-screen on value-request for p_file.
perform f4_help.
"Start-of-selection.
start-of-selection.
perform upload_data.
"End-of-selection.
end-of-selection.
perform display_data.
"Form f4_help
form f4_help .
data:
        l_file_name like ibipparms-path .
call function 'F4_FILENAME'
    exporting
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = 'P_FILE'
    importing
      file_name     = l_file_name.
p_file = l_file_name.
endform.                                                    " f4_help
"Form upload_data
form upload_data .
type-pools:truxs.
data:li_tab_raw_data type truxs_t_text_data.
data:l_filename      like rlgrap-filename.
l_filename = p_file.
call function 'TEXT_CONVERT_XLS_TO_SAP'
    exporting
      i_tab_raw_data       = li_tab_raw_data
      i_filename           = l_filename
    tables
      i_tab_converted_data = i_bank_det
    exceptions
      conversion_failed    = 1
      others               = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform.                    " upload_data
" Form display_data
form display_data .
data: char100 type char100.
loop at i_bank_det into w_bank_det .
    if sy-tabix = 1.
      write w_bank_det.
      write / '------------------------------------------------------------'.
    else.
      write / w_bank_det.
    endif.
endloop.
endform.                    " display_data
Regards,
Venkat.O

Error while uploading a textfile into internal table.

Hello,
i am uploading a textfile into an internal table and i have used the 'CALL METHOD cl_gui_frontend_services=>gui_upload' for uploading of the file into the internal table. But instead i am getting sumthing lyke
CTTL#1001#BANK-0014393-PP-LHR#|#2000#112312#CCL00#29.08.2006#|Cash In </b>. I have the following internal table,
[code]
begin of ls_cashrec,
     bukrs type char30,        " company code
     cjnr type char30,         " cash journal number
     cjtranstxt type char30,   " business transaction
     cjamount type wrbtr,      " amount
     dzuonr type char30,       " assignment
     prctr type char6,         " profit center
     budat type sy-datum,      " posting date
     cjpostext type char30,    " text
end of ls_cashrec.
and
DATA:
gt_cashrec TYPE STANDARD TABLE OF ls_cashrec.
where am i wrong ?
Regard and Thanks,
Shehryar

Hi again,
1. The best thing is that the
   data format in text file is
   YYYYMMDD (8 characters only)
(Then in that case, we can directly
declare our field in internal table type sy-datum.
2. Other wise,
   we have to declare the field in internal table
   as character format and length
   (based upon the text file field length,
   including DOTS / etc)
Then we have to finally convert in YYYYMMDD
format in to other field,
which we will finally use as sy-datum field.
regards,
amit m.

Uploading EXCEL file into Internal Table Using GUI_UPLOAD

Can any one please give me an example use of FM "GUI_UPLOAD" which to upload a EXCEL file????? (not .txt)

Use the forum search option [GUI_UPLOAD FOR EXCEL|https://forums.sdn.sap.com/search.jspa?threadID=&q=GUI_UPLOADFOREXCEL&objID=c42&dateRange=all&numResults=15&rankBy=10001]) or sdn wiki/code gallery ([UPLOAD EXCEL|https://wiki.sdn.sap.com/wiki/dosearchsite.action?searchQuery.queryString=upload+Excel&searchQuery.spaceKey=conf_global]) - Same question already answered many time
GUI_UPLOAD doesnt perform such conversion (Excel, Word, PDF) and wont give you a suitable result, use one of the FM mentioned above or [office integration|http://help.sap.com/saphelp_47x200/helpdata/en/21/b53138e1ba11d2bdbe080009b4534c/frameset.htm] or OLE or convert your Excel sheet to a simpler format : txt, csv, xml.
Regards,
Raymond

Upload excel file to internal table in web dynpro program

Hi friend's
In web dynpro program how to upload excel file into internal table and finally data will be save Y table.

hi,
See the properties of File Upload UI element..
Link: [http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/732f0510d83ff6e10000000a42189c/frameset.htm]
Goto References -> User Interface Elements -> Integration Category -> File upload..
After creating the 'FILE UPLOAD' element in a view.. Bind a datasource(a context attribute with STRING) with the data property..
Double click on ONACTION_UPLOAD method. Write a code as given below.
METHOD onactionon_upload .
TYPES :   BEGIN OF str_itab,
       name(10) TYPE c,
       age(10) TYPE c,
       END OF str_itab. DATA : t_table1 TYPE STANDARD TABLE OF str_itab,
         i_data TYPE STANDARD TABLE OF string,
         l_string TYPE string,
         fs_table TYPE str_itab,
         l_xstring TYPE xstring,
         fields TYPE string_table,
         lv_field TYPE string.
DATA : t_table TYPE if_main=>elements_data_tab,
         data_table TYPE if_main=>elements_data_tab.
* get single attribute
wd_context->get_attribute(
EXPORTING
name = `DATASOURCE`
IMPORTING
value = l_xstring ).
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
    EXPORTING
      in_xstring = l_xstring
    IMPORTING
      out_string = l_string.
SPLIT l_string AT cl_abap_char_utilities=>newline INTO TABLE i_data.
* Bind With table Element.
LOOP AT i_data INTO l_string.
    SPLIT l_string AT cl_abap_char_utilities=>horizontal_tab INTO TABLE fields.
   READ TABLE fields INTO lv_field INDEX 1.
    fs_table-name = lv_field.
READ TABLE fields INTO lv_field INDEX 2.
    fs_table-age = lv_field.
APPEND fs_table TO t_table1.     "Append to the internal table
ENDLOOP.
Edited by: Rameshkumar Raamasamy on Feb 9, 2010 9:39 AM

Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API

Hi All,
In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
Error within screenshot are : status Code : 409
status Text :conflict
For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
my code is
function PerformUpload(listName, fileName, listItem, fileData)
var urlOfAttachment="";
// var itemId = listItem.get_id();
urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
// use the request executor (cross domain library) to perform the upload
var reqExecutor = new SP.RequestExecutor(appWebUrl);
reqExecutor.executeAsync({
url: urlOfAttachment,
method: "POST",
headers: {
"Accept": "application/json; odata=verbose",
"X-RequestDigest": digest
contentType: "application/json;odata=verbose",
binaryStringRequestBody: true,
body: fileData,
success: function (x, y, z) {
alert("Success!");
error: function (x, y, z) {
alert(z);

Hi,
THis is common issue if your file size exceeds
upload a document of size more than 1mb. worksss well for kb files.
https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
or try the below method
https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you

Uploading csv file into database using apex

Dear all
I am using apex 4 and oracle express 10g, i need to upload .csv file into the database for one of my appls, i have referred discussion forum for solutions, i found also, but some how its not working for me.
below mentioned is error and the code
ERROR:
ORA-06550: line 38, column 8: PLS-00221: 'V_DATA_ARRAY' is not a procedure or is undefined ORA-06550: line 38, column 8: PL/SQL: Statement ignored ORA-06550: line 39, column 8: PLS-00221: 'V_DATA_ARRAY' is not a procedure or is undefined ORA-06550: line 39, column 8: PL/SQL: Statement ignored ORA-06550: line 40, column 8: PLS-00221: 'V_DATA_ARRAY' is not a procedure or is undefined ORA-06550: line 40, column 8: PL/SQL: Statement ignored ORA-06550: line 41, column 8: PLS-00221: 'V_DATA_ARRAY' is not a proc
Error
OK
CODE:
DECLARE
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len number := 1;
v_line VARCHAR2 (32767) := NULL;
v_data_array wwv_flow_global.vc_arr2;
BEGIN
-- Read data from wwv_flow_files
select blob_content into v_blob_data
from wwv_flow_files where filename = 'DDNEW.csv';
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len ) LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
-- Convert comma to : to use wwv_flow_utilities
v_line := REPLACE (v_line, ',', ':');
-- Convert each column separated by : into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line);
-- Insert data into target table
EXECUTE IMMEDIATE 'insert into TABLE_X (v1, v2, v3, v4 ,v5, v6, v7,v8 ,v9, v10, v11)
values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)'
USING
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4);
v_data_array(5);
v_data_array(6);
v_data_array(7);
v_data_array(8);
v_data_array(9);
v_data_array(10);
v_data_array(11);
-- Clear out
v_line := NULL;
END IF;
END LOOP;
END;
what i understand from this is system does not identify v_data_array as array for some reasons, please help me.
initially system was giving error for hex_to_decimal, but i managed to get this function on discussion forum and now it seems to be ok. but v_data_array problem is still there.
thanks in advance
regards
Uday

Hi,
Mistakes in your sample I did correct
Problem 1
select blob_content into v_blob_data
from wwv_flow_files where filename = 'DDNEW.csv'; to
select blob_content into v_blob_data
from wwv_flow_files where name = :P1_FILE;Problem 2
EXECUTE IMMEDIATE 'insert into TABLE_X (v1, v2, v3, v4 ,v5, v6, v7,v8 ,v9, v10, v11)
values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)'
USING
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4);
v_data_array(5);
v_data_array(6);
v_data_array(7);
v_data_array(8);
v_data_array(9);
v_data_array(10);
v_data_array(11); to
EXECUTE IMMEDIATE 'insert into TABLE_X (v1, v2, v3, v4 ,v5, v6, v7,v8 ,v9, v10, v11)
values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)'
USING
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8),
v_data_array(9),
v_data_array(10),
v_data_array(11); And I did create missing table
CREATE TABLE TABLE_X
    v1 VARCHAR2(255),
    v2 VARCHAR2(255),
    v3 VARCHAR2(255),
    v4 VARCHAR2(255),
    v5 VARCHAR2(255),
    v6 VARCHAR2(255),
    v7 VARCHAR2(255),
    v8 VARCHAR2(255),
    v9 VARCHAR2(255),
    v10 VARCHAR2(255),
    v11 VARCHAR2(255)
);Regards,
Jari
Edited by: jarola on Nov 19, 2010 3:03 PM

(409) Conflict Error while uploading the file into Sharepoint library

Getting the below error while uploading the file into Sharepoint library.
(409) Conflict. at System.Net.HttpWebRequest.GetResponse() at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() at Microsoft.SharePoint.Client.File.SaveBinary(ClientContext context, String serverRelativeUrl,
Stream stream, String etag, Boolean overwriteIfExists
I have used the below code:
ClientOM.File.SaveBinaryDirect(clientContext, "/Shared%20Documents/NewDocument.pptx", memoryStream, true);
Thanks in advance.

May be issue is with path.
https://server/ should be there instead of
subsite path(https://server/path/path)
in the client context
Check the below link
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/fbb38b10-1127-48a6-a65f-0301edd766c4/the-remote-server-returned-an-error-409-conflict-error-while-uploading-files-to-sharepoint?forum=sharepointdevelopmentlegacy

Getting Issue while uploading CSV file into internal table

Similar Messages

Maybe you are looking for