Getting Runtime error when using HP Simple Pass

Getting Runtime Error and Firefox shutdown when using HP Simple Pass on new HP dm 1165

Try HP support. <br />
http://h30434.www3.hp.com/t5/Operating-systems-and-software/HP-Simple-Pass-Not-working-in-Firefox/m-p/348876

Similar Messages

ABAP Runtime error when using RSPC

Hi Team,
I am getting ABAP runtime error when using RSPC in my system.For the same user id in other systems this transaction is working fine.Pls help me.
regds
Sha

Hello Sha Han,
What is the runtime error you are getting?
Please check the authorization also for the user in that system
Thanks
Chandran

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.

Getting Compilation error when used SET or MULTISET operator on nested tabl

Dear All,
I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
This is working fine in other DB installations of 10g but does not work in another 10g DB.
it says "wrong number of parameter or datatype used in SET"
Can any one suggest what went wrong here?
Thanks in advance.

Can any one suggest what went wrong here?Only if you would post the query and Oracle versions on both databases.
Besides, this forum deals with issues in Oracle product installation. So post this query in SQL PL/SQL forum for better response.

ME21N Runtime error when using u201CDocument overview onu201D

Hi Gurus,
****I encountered Runtime error when using u201CDocument overview onu201D with variant u201CMy purchase ordersu201D or u201CPurchase orders on holdu201D. I encountered following ABEND message.
Varaint SAP&MEPOBEST not created
****I faced another issue which is mentioned below.
All page activities are blocked when using u201CDocument overview onu201D with variant u201CPurchase Ordersu201D or u201CContactsu201D .
Please reply.

Hello,
To use that form you need to configure ADS in your system.
I sugest you to read the ADS configure manual and the troubleshooter note: SAP Note Number: 944221

Portal runtime error when using lightweight page

hello everyone,
i had portal runtime error when i changed from default framework page to lightweight page, the DTN istn't shown,(TLN is all right) and in DTN section stay an exception message.
i checked the log:
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Resource
Component : pcd:portal_content/mxf/mxfDeskTop/frameworkPages/lightframeworkpage/com.sap.portal.lightinnerpage/com.sap.portal.lightDetailedNavigationTree
Component class : com.sap.portal.navigation.LightDetailedNavigationTree
User : mxf
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:444)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
     at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:680)
     at com.sap.portal.navigation.LightDetailedNavigationTree.doContent(LightDetailedNavigationTree.java:47)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: Original exception:
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.doContent(_sapportalsjsp_LightDetailedNavigationTree.java:57)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.service(_sapportalsjsp_LightDetailedNavigationTree.java:31)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:360)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
     ... 13 more
Caused by: java.lang.NullPointerException
     at com.sapportals.portal.navigation.NavigationEventsHelperService.isPortalPlaceNode(NavigationEventsHelperService.java:2378)
     at com.sapportals.portal.navigation.taglibrary.conditionals.IfNavNodeIsNavZoom.doStartTag(IfNavNodeIsNavZoom.java:44)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.subDoContent(_sapportalsjsp_LightDetailedNavigationTree.java:585)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.doContent(_sapportalsjsp_LightDetailedNavigationTree.java:51)
     ... 17 more
#1.5 #000C2918355B00880000000600000F0800044681D754621D#1203423385171#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#mxf#815##192.+xxxxSD1_2732250#mxf#3b334dc0dee411dc8d1d000c2918355b#Thread[PRT-Async 9,5,PRT-Async]##0#0#Error##Java###01:16_19/02/08_0035_2732250
[EXCEPTION]
#1#java.lang.NullPointerException
     at com.sapportals.portal.navigation.NavigationEventsHelperService.isPortalPlaceNode(NavigationEventsHelperService.java:2378)
     at com.sapportals.portal.navigation.taglibrary.conditionals.IfNavNodeIsNavZoom.doStartTag(IfNavNodeIsNavZoom.java:44)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.subDoContent(_sapportalsjsp_LightDetailedNavigationTree.java:585)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.doContent(_sapportalsjsp_LightDetailedNavigationTree.java:51)
     at pagelet._sapportalsjsp_LightDetailedNavigationTree.service(_sapportalsjsp_LightDetailedNavigationTree.java:31)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:360)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
     at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:680)
     at com.sap.portal.navigation.LightDetailedNavigationTree.doContent(LightDetailedNavigationTree.java:47)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:534)
i didn't have any own jsp files for it. My program works well under standard framework. Must i in portalapp.xml sth. insert?
get any ideals?
Thanks in advance!
best regards!
Mao

Hi,
This looks to be a quite complicated problem, and I would recommend you create a support message (OSS) against SAP on the problem.
It appears a navigation taglib fails, but it doesn't give much details on why.
Dagfinn

Getting an error when using fm 'excel_ole_standard_dat'

Hi All,
I am getting an error when trying to generate an excel file with the data in the internal table using fm 'Excel_ole_standard_dat'.
can anybody help me in this.
Thankyou,
Prasanna

Hi Prasanna
Could you tell me what's the sy-subrc code you are getting ?
Pushpraj

Get 8004 error when using copy past command transferring pictures from one USB drive to another, why ?

Why do I get 8004 error, when I use copy past command to transfer pictures from one USB drive to another ?
There is no problem if the second drive is empty.

mumbles27 wrote:
one is MS-DOS
would that be in FAT32 or NTFS ?
mac OS extended (case sensitive)
i'm not 100 % sure but i have a fancy such a combination may not play well together.
nothing bigger than 2GB for one file
i was asking because FAT3 has a limitation in that it will not allow you to copy files larger than 4 GB.
JGG

Getting a runtime error when using a standard Form Interface

I am getting this Error analysis:
The following syntax error was found in the program /1BCDWB/SAPLSM00000212 :
"Field "VBRK-WAERK" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. ."
The problem is, I am using a standard interface INVOICE_INTERFACE for a custom form. Why am I getting this error? Where in my form should I declare VBRK-WAERK for my program to work?

Here are some troubleshooting steps that will help you isolate and fix this problem:
Create a Z-copy of the INVOICE_INTERFACE (ex. ZIF_SD_INVOICE). Use this interface in your custom form (ex. ZFRM_SD_INVOICE).
OPTIONAL: In your custom form, deactivate all of the fields you are not using. This will minimize the amount of work in the next steps.
In your custom interface, go to the Currency/Quantity Fields section. There are 88 currency fields in the stock interface, but only 12 of them are defined in this section. At this point you have options:
If you still have fields that are active, but not listed here, you will have to enter them.
If you didn’t deactivate anything, you will have to define the remaining 76 fields here.
Use the interface at the bottom and deactivate the CMPRE_FLT field in your Adobe Form. It can be found in the PAYMENT_CARDS table contained in the HEAD_DETAIL structure of the interface. The other CURR and QUAN fields are all defined in this interface. The pictures will guide you to that field in your form.

Runtime error when using ustack() in syscall::lwp_park:return probe

Hi,
I use Solaris 10_b72 on SUN fire V250 machine, My application has be compiled under solaris 8
using Forte 6 update 1 c++.
My dtrace script is as following:
#! /usr/sbin/dtrace -s
#pragma D option dynvarsize=4m
syscall::lwp_park:entry
        @beCalled[probefunc] = count();
        self->syscall_start_time = timestamp;
syscall::lwp_park:return
/self->syscall_start_time > 0 /
        @[ustack()] = sum(timestamp - self->syscall_start_time);
        self->syscall_start_time = 0;
END
        printa(@beCalled);
        printf("----------------------------------------------\n");
        normalize(@,1000000000);
        printa(@);
        exit(0);
} I then run the dtrace script as following:
bash-2.05b# ./syscall_error.d > /tmp/p
dtrace: script './syscall_error.d' matched 3 probes
dtrace: error on enabled probe ID 2 (ID 129: syscall::lwp_park:return): invalid address (0x1f6cf8000
) in action #2
dtrace: error on enabled probe ID 2 (ID 129: syscall::lwp_park:return): invalid address (0x1f6cf8000
) in action #2
^C
At runtime, I got the above error information. When i remove ustack() in syscall::lwp_park:return,
it work well.
Is it a bug in dtrace or my scripte is somewhere be writen wrong?
Can it help when using the formal Solaris 10 release?
thanks.

Hi,
Your script works fine on the GA release of 10 on x86...
max

Runtime error when using CHARM_CREATE

Hi experts,
When I try to create a new Change Request via transaction charm_create I get a runtime error.
After a bit of debugging I have found out that the error is triggered in class CL_CHM1_INSTANCE -> method IF_SOCM_INSTANCE~CHECK_STATUS_CONDITION.
This happens at line 216 at the following if statement:
IF <cond_mapp>-condition_id(1) CO 'ZY'. " customer condition
check by BADI Implementations
          CALL METHOD lc_exit->check_condition
            EXPORTING
              flt_val       = <cond_mapp>-condition_id
              hf_instance   = me
            CHANGING
              conditions_ok = l_yes.
        ELSE.
The reason is that lc_exit is initial and therfore the call to the method lc_exit->check_condition triggers a runtime error of type OBJECTS_OBJREF_NOT_ASSIGNED_NO with exception CX_SY_REF_IS_INITIAL.
Any idea why this is happening? Is there a sap solution for this?
Many thanks,
Brodo

Please implement following note:
    #963354 Performance improvement of service session buffer
    #1005323 Dump in RDSMOPSOL_MONIREFRESH in Support Package 09
or
The reason could be the system is not defined correctly in Solution Landscape.
Could you try to remove the system from the solution and add it again?
After that, check whether an application instance has been defined and
the logical system is correct, e.g. <SID>:<client>    > SM1:100.

I get an error when using SMTP e-mail send

When i try to use SMTP mail send.vi i get an error code 1 saying TCP cannot exchage information with SMTP vi. It mentions possible reason for it is not using GPIB card. But there is no relation between GPIB and TCP. I am not able to figure out the problem. Can anyone help ??
For Latest TECH News check out my blog at http://directfromdigg.blogspot.com

Hello,
Error 1 is a very generic error. It means that either an input parameter is invalid or the gpib controller be the controller in charge, but not necessarily both. In the context of this problem, it is referring to an input that doesn’t appear to be correct and as you mentioned has nothing to do with GPIB. The most common problem with the SMTP Email VIs is an incorrect name to the ‘Mail Server’ input. The Mail Server is the name or IP address of the outgoing SMTP mail server you are using. The easiest way to find this information is to check with your IT department. I hope this helps. Best of luck!
Regards,
Chris J

Runtime error when using FM SAP_CONVERT_TO_TEX_FORMAT

Hi,
I tried to use this FM SAP_CONVERT_TO_TEX_FORMAT to convert my internal table's data to comma separator but it hit runtime error.
The runtime error says :-
Runtime Errors         CALL_FUNCTION_CONFLICT_TAB_TYP
Exceptn                CX_SY_DYN_CALL_ILLEGAL_TYPE
I tried to convert an internal table with two fields, it worked but it dont work when i was trying to convert the internal table with 53 fields. Please advice. It is not feasible to hardcode the comma into my structure or use concatenate way.

Hi Mrutyun,
Thanks for the link but that doesn't solve my problem.
Hi Viji,
I'm using the same way as you suggested before i posted the question on this forum. It didn't work.
Hi Guys,
I realised that the main problem occurs because i have such data (as below) in my internal table which leads to runtime error. The table -> i_tab_converted_data cannot accept text that is non-character type.
Eg data : Siège
Is there any way that i can overcome the above? The runtime error explains as the below .
{ Only character-type data objects are supported at the argument
position "op1" for the statement
   "IF ... op1 CO op2 ...".
In this case, the operand "op1" has the non-character-type "I". The
current program is flagged as a Unicode program. In the Unicode context,
type X fields are seen as non-character-type, as are structures that
contain non-character-type components. }
Please advise.
Thanks,
Loo

How do I avoid getting this error when using an OpenVPN?

I did a little research online and noticed that people got this same (or a very very similar) error in iOS on Safari when browsing with a proxy and they just had to reset network connections.
I'm getting it in OS X. When I turn on the VPN sometimes browsing will work fine, but then this pops up and once I get this error in one tab I get it in all of them. Firefox still works. There's plenty of memory -- RAM and ROM.
When I turn off the VPN it works again.

Thanks Carolyn!
I don't think this is the solution for me, although I do think it is a clue. It can't be a mistyped proxy field, as this happens across different VPN's (i.e. work, personal, school) and browsing is working fine for a time before it starts all the sudden giving me that message.
I am on 10.8 which I didn't think was related, but now I'm starting to think maybe it is, so I'll also post in the Dev community. However if you or anyone has any ideas PLEASE do follow up, as I find the user support community to be far, far more useful than the Dev community in general!

FRM-47026 Cannot get parameter error when using bi graph

Hi,
I have recently tried to use the BI Graph bean provided as a demo from Oracle.
I have amended the cursors and put into our system but get an error on the master graph.
When i mouse click on a column i recieve the error from forms :
FRM-47026 Cannot get parameter GRAPH_INFO attributes from parameter List CUSTOM_ITEM_LST19: no such names parameter exists.
Any ideas. i have not changed the code in this trigger only the procedure cursors to work within our system
code in trigger:
               eventValues := get_parameter_list(:system.custom_item_event_parameters);
               get_parameter_attr(eventValues,'GRAPH_INFO',eventValueType, tempString);
               set_custom_property('PJC.WAREHOUSEGRAPH',1,'HIDE_GRAPH','');
               FORMSGRAPHSAMPLE.clearData('PJC.DETAILGRAPH');
               FORMSGRAPHSAMPLE.populateDetailGraphData('PJC.DETAILGRAPH',tempString,',');
thanks

Hi,
Did you ever get this issue resolved?
I am facing the same problem.
Thanks
Ian

Getting Runtime error when using HP Simple Pass

Similar Messages

Maybe you are looking for