Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
Solved!
Go to Solution.

Hi - are you getting it at the start of installation, during or after 100% progress has finished?
Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
This could be caused by the NVIDIA chipset driver :
https://decibel.ni.com/content/message/46299?tstar​t=-130
Thanks
Sacha
// it takes almost no time to rate an answer

Similar Messages

  • HT203175 After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

    After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

    One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
    If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

  • Satellite A300D - Upgrading from Vista - "Setup.exe has stopped working"

    Hello,
    I am using Satellite A300D with Vista and I have been trying to upgrade to Windows 7 using the Toshiba Upgrader.
    After choosing the language and proceeding with other steps, it asks me to uninstall a bunch of programs. Some are uninstalled just fine but when it comes four other programs it says "Setup.exe has stopped working" and it does not uninstall.
    I have tried uninstalling them manually but I got the same message.
    These programs are;
    Atheros Driver Installation Program
    Toshiba Hardware Setup
    Toshiba Supervisor Password
    Realtek High Definiton Audio Driver
    As a result I cannot proceed with the upgrade.
    Anyone know what the issue might be?
    thanks in advance,
    Can - TR

    I am having the exact same problem. I have the toshiba satellite 350D. I am only stuck at the atheros driver installation program. As soon as it's supposed to be uninstalled I receive the " setup.exe. has stopped working" I tried uninstalling manually as well and get the same message.
    I think the only fix would be to reinstall vista and then try upgrading to windows 7 again. I would like to stay away from reformatting though.
    I would love an answer to this question as well!! (frustrating)

  • WRT400N setup.exe has stopped working

    I just got a brand new HP Pavillion desktop with Vista 64 and I am having installation issues. Every time I put the setup disc in the drive it fails to load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried skipping the autorun and going in to my rom drive and manually selecting the setup.exe file. The initial splash screen appears and says please wait loading but I never get any farther than that because the program locks up. I thought maybe the disc was defective but I have tried it on an XP desktop and an XP netbook and the disc works fine on both of those. What gives? I have searched this entire forum and it seems like I am the only person having this problem. Is my new computer defective or is it the user
    Solved!
    Go to Solution.

    Is the new Vista Dekstop is wired computer or wireless computer ?
    Are you able to go online with the other wired and wireless computers ? If yes then, you do not need to run the CD anymore on the VIsta Dekstop.
    If the new Vista dekstop is wired computer then, just connect the eternet cable from the computer to the router on one of the 4 eternet port and restart the computer and it should be able to go online.
    If the new Vista dekstop is wireless computer then, try to locate your network and connect it using the secuity key(if the network is secured)...It should work !!!  

  • Cannot install ZEN V -- Setup.exe has stopped working -- CTCABEX.

    I cannot install Creative Software for Zen V. Just before the installation finishes, I get the message: "setup.exe has stopped working. A problem with caused the program to stop working correctly. Windows will close the file and notify you if a solution is available."
    I also get the following message: CTX Installer-Install Shield Wizard that file CTCABEX.dll not found.
    Any ideas on how I can load the creative Zen V software>
    Thanks,

    I am also facing the same issue and i tried with the following modes
    xp mode
    vista mode
    2000 mode
    still i am seeing the same error.
    My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
    Edited by: user5345841 on May 26, 2011 12:10 PM
    Edited by: user5345841 on May 26, 2011 12:55 PM

  • I get the "firefox has stopped working" message after closing browser

    Hello.
    My problem is that when I close the FireFox browser I get the "FireFox has stopped working" message. It's pretty annoying. I've read some other posts here that described a similar problem and have tried some of the suggestions in them including:
    A clean install, a browser reset, running in safe mode, unchecking hardware acceleration, disabling extentions and plugins one at a time, uninstalling my antivirus (avast), rolling back to version 23.01 and checking run in compatibility mode that someone claimed helped them. None of this was effective.
    It seems like after a computer restart the browser will be ok for 2-4 closings and then it will start with the message on every closing. Also, after I uninstalled avast it was good for 6 closings. Rolling back also gave me about 6 message free closings. But then the messages start and doesn't stop.
    Is there anything else I can try? Thanks in advance for any suggestions.

    One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
    If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

  • Cannot install BI Publisher 10.1.3 Windows 7 setup.exe has stopped working

    Hallo!I am trying to install Oracle BI Publisher 10.1.3.4 on Windows 7 Professional 32 bit.When I click on the setup.exe,the following output appears on the cmd prompt
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0 . Actual 5.1Passed
    Checking monitor: must be configured to display at least 256 colors . Actual 4294967296 Passed
    Checking Temp space: must be greater than 500 MB . Actual 252112 MB Passed
    Checking swap space: must be greater than 500 MB . Actual 1900MB Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from C:\Users\jirungu\AppData\Lo
    cal\Temp\OraInstall2011-04-13_09-33-57AM. Please wait ...
    When the OUI tries to launch,the following error appears
    setup.exe has stopped working.
    Is this due to an incompatibility problem?Are there any prerequisites for installing BI Publisher?How can I resolve this?
    Thanks.
    Edited by: 4joey1 on Apr 12, 2011 11:35 PM
    Edited by: 4joey1 on Apr 12, 2011 11:36 PM

    I am also facing the same issue and i tried with the following modes
    xp mode
    vista mode
    2000 mode
    still i am seeing the same error.
    My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
    Edited by: user5345841 on May 26, 2011 12:10 PM
    Edited by: user5345841 on May 26, 2011 12:55 PM

  • HT4623 Why do I get 'ATH.exe has stopped working'.

    Why do I get 'ATH.exe has stopped working'. The issue appears to affect my iPhone synch. Contact information entered on my iPhone is not psynching to Outlook as previously it has.
    I have all available updates from Apple.

    Hi Amethest,
    Thanks for visiting Apple Support Communities.
    If you're unable to sync due to this error message, you may need to remove and reinstall iTunes by following the steps in of these articles:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    Best,
    Jeremy

  • HT201317 Why do I keep getting applePhotoStream.exe has stopped working

    Why di i keep getting applephotostream.exe has stopped working on my PC. I have removed the icloud control panel and reloaded it many times and whilst it cures the problem temporarrily it soon comes back................any permanent cures please!

    The only worked it worked for me was to uninstall icloud, restart my pc and reinstall (download from apple site) icloud.

  • Why do I keep getting an account has been disabled message when trying to redeem a gift card?

    Why do I keep getting an account has been disabled message when trying to redeem a gift card?  Have gone back through account settings and don't see any problems with the account.  I have both mine and my daughter's account under mine.

    See http://support.apple.com/kb/TS2446.  If resetting the password doesn't fix things, you'll probably have to contact iTunes store support for assistance: http://www.apple.com/emea/support/itunes/contact.html.

  • I get a "Palm desktop by access applicatio​n has stopped working" message when switching to the Month calendar view.

    I have a Z22 and am running Access version 6.2.2 on a PC with Vista.
    When I move from Day, Week or Year to Monthly view in the Calendar, I get the "Palm Desktop by Access Application has stopped working" (and then the Windows message saying they are checking for a solution, which they never seem to find).
    Does any one know 1) how to fix this and 2) what is the cause ?  Am I running old software which I need to update ?
    Thanks.
    Post relates to: Palm Z22

    Thank you, aeisha_anis for the steps to correct this problem.  I verified that I must have corrupted calendar data as the PALM Desktop does come up and work when I follow your first 4 steps and remove the data from it.  I can't, however, get through the importing step at the end of your instructions.  I've tried a few times and am afraid I may have messed up the data file as it now is only showing a datebook. mdb and a datebook.bak file under the DateBook folder I copied to my desktop, but no datebook.dab folder as it was showing before and I never did find the datebook.dat file you mentioned.  I still have all of my current calendar data on my Palm Centro but I can't get it to sync with the Palm Desktop without getting the "Palm Desktop by ACCESS Application has stopped working" message.  Do you have any ideas on how to fix this problem?  Thanks much!

  • "itunes has stopped working" message when syching iphone

    Need help..
    Ever since I installed the update for the apple software on my PC, when I try to sync my iphone 4 on the last step of synching I get a window popping up saying that "itunes has stopped working". Then I get prompted to close the programme.
    I run Windows 7, and cannot understand why it does this.
    If anyone can help, I would greatly appreciate it.

    Not sure what you've seen/tried so far, so I'll run you through my standard advice as of this morning, Marty.
    There's a bug with 10.1.0.54, Amanda, that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices (when the convert to 128 kbps AAC option is enabled).
    Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
    (1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though), and/or disable the convert to 128 kbps AAC when syncing option.
    (2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
    (3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
    (3 and 4 do help with the device-syncing variation.)

  • Adl.exe has stopped working message

    This is very frustrating because I'm new to Flex 4 (Win 7, 32 bit) and everything I read has not led me to a solution (at least something I understand).
    Every time I test my app I get the message adl.exe has stopped working and I have to close the file.
    I'm running the current version of Air (2.5). But the adl.exe is version 1.5.3.
    Is there a conflict?

    Hello everyone,
    In the past we've received a few crash dumps for this issue but the call stacks have been less than helpful.  I've got an alternate way for the crash dumps to be created and I'm hoping someone can help me out.  Here's all you need to do:
    Download the two attached files: Enable Crash Logging.reg and Disable Crash Logging.reg.
    Double-click the Enable Crash Logging.reg file and allow it to write to your registry
    Recreate the ADL crash
    After the crash, open a file browser window and type the following in the navigation bar:%localappdata%
    Go into the CrashDump folder and you should see a new .dmp file for ADL.
    Zip that file up and send it to [email protected] or give me a dropbox link and hopefully we'll get better info than our previous attempts
    Optional, double-click the Disable Crash Logging.reg file downloaded in Step 1 and click OK to disable future logging.  Note that enabling will only save 5 crash logs before it starts deleting older ones.  This step turns this functionality off completely.
    Thanks,
    Chris

  • PProHeadless.exe has stopped working error when opening projects in Adobe Media Encoder CS6

    Hi, I recently upgraded to Adobe Cloud CS6 and am having problems with the Adobe Media Encoder CS 6 (version 6.0.1.31 64-bit).
    When I try to add Adobe Premiere projects in AME, it sometimes gives me the following error:
    PProHeadless.exe has stopped working
    I tried rebooting, and it still gives me the same error.  Sometimes the project will load, sometimes it won't.
    The Premiere projects contain a H.264 .mov file coming from my Canon T2i.  I also added an overlay logo to the bottom right of the video that I created in Adobe After Effects, which only contains text, no effects, no motion, etc.  Sometimes I also have a .wav file recorded from a Zoom H4n, but not always.  I usually edit those in Adobe Audition with the remove noise feature.
    I am running on Windows 7 Ultimate 64-bit.  I'm using an i7 with 16GB ram and an ATI 6870 video card.
    I have the LUT buddy plugin installed.
    It will give me the error the first time I try to load the project, and the connection to Dynamic Link Server will fail.  Afterwards, if I try to load the project again, even if I restart AME, it stays stuck in the Connecting to Dynamic Link server...
    Any help anyone could provide would be appreciated.

    Hi Dima,
    Thank you very much for your prompt reply.  Dragging the sequence from PPro to AME made AME lock up.  But your second suggestion of exporting the video directly from PPro seems to be working.  I still have 6 minutes to go, but at least it got up to 25% so far, so everything seems good.
    Thank you once again!
    (although it would be nice if I could go through AME just in case)

  • I updated to Firefox 4 and now I get a Firefox has stopped working message whenever I try to load any websites.

    I updated to Firefox 4 and now I get a Firefox has stopped working mesage whenever I try to load any websites. I updated my video driver and cleared my history to see if that would help. I looked for a crash ID on the homepage, but the last registered crash is from February. I also tried to open in Firefox safe mode, but the problem continued to occur. I'm not sure what to do next, please help!

    Try to (re)install the latest version of FireFTP.
    *FireFTP: https://addons.mozilla.org/firefox/addon/fireftp/
    * http://kb.mozillazine.org/Profile_backup

Maybe you are looking for