Getting the communicatin error in Shared services

In the shared service i am using the ladap account i am trying to access control to the one application in the assign access tab but i am getting the communication error
Communication Error : http://localhost:19000/hfm/security//getRights.asp <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>500 Internal Server Error</title>
</head><body>
<h1>Internal Server Error</h1>
<p>The server encountered an internal error or
misconfiguration and was unable to complete
your request.</p>
<p>Please contact the server administrator,
[email protected] and inform them of the time the error occurred,
and anything you might have done that may have
caused the error.</p>
<p>More information about this error may be available
in the server error log.</p>
</body></html>

Thanks for your response. i am using Hyperion 11.1.1.4, 32 bit win2008 server and weblogic 9.2 and appache 2.0.61.
last week i migrated the hfm application successfully from 9.2.1 to 11.1.1.4 the i tried the migrate the shared services users there are using ldap concept.
first i used the native directory users and select the one users and assign the provisions its working fine.
And then i implemented the ldap and the all the users are listed out in ldap groups and i select the one users (ldap) in through application groups to assign the application access. and i am getting above error
Thanks
Kimi
Edited by: Kimi on Jan 27, 2012 12:02 PM

Similar Messages

  • I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do.

    I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do. I am the only user on my HP Pavillion laptop. Help!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • When updating iTunes to 11.4 I get the following error:  "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.

    When updating iTunes to 11.4 I get the following error:  "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • An internal database error occurred in the Business Data Connectivity Shared Service. SQL Error Number : 229

     Recently i upgraded my SharePoint server 2013 to SP1, after the upgrade i received following message in manage database Status page " Databases running in compatibility range, upgrade recommended" 
    for Business Data Connectivity Database. Then i ran Sharepoint Configuration wizard, which fixed that error on that page but i am getting a error message while accessing BDCApplication page in manage service applications pagein central admin"
    An internal database error occurred in the Business Data Connectivity Shared Service. SQL Error Number : 229
    Sys Log :
    The BDC Service application failed due to a SQL Exception: SQLServer host WSQLD05\DV. The error returned was: 'The EXECUTE permission was denied on the object 'proc_ar_GetAdministrationMetadataCatalogByPartitionId', database 'sp_BusinessDataConnectivity_DV13',
    schema 'dbo'.'
    I checked the Db role of the service app pool account, it has SPDataAccess permission over the Database. i cant recreate another application without knowing the root cause. I hope i can get better option to troubleshoot the issue.
    Thank you

    As per the error message, you can at least grant the BDC service application pool account the EXECUTE perimssions on the sp_BusinessDataConnectivity_DV13 database
    Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
    Blog |
    Twitter | LinkedIn
    SQL Server High Availability and Disaster Recover Deep Dive Course

  • The latest version of iTunes did not install properly on my Windows 7 PC.  I am getting the following error message: "Service 'Apple Mobile Device' failed to start.  Verify that you have sufficient privileges to start system services." Can anyone help?

    The latest version of iTunes did not install properly on my Windows 7-64bit PC.  I am getting the following error message: "Service 'Apple Mobile Device' failed to start.  Verify that you have sufficient privileges to start system services."
    I have tried the following troubleshooting steps without success:
    Restart PC
    Uninstall iTunes and attempt to reinstall
    Verify that I am signed in as an administrator
    Download and save iTunes64Setup file, right-click, and run as Administrator
    Disable Norton antivirus software
    Any suggestions would be greatly appreciated!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • When I attempt to sych with I tunes I get the following Error Message.  "Itunes was unable to load data class information from synch services. Reconnect or try again later."  How do I fix this?  This started happening after I updated to the latest version

    When I attmpt to synch my Iphone I get the following error message.  "Itunes was unable to load data class informationfrom synch services.  Reconnect or try again later.  This started after I uddated to the latest version of Itunes. What should I do?

    My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade. 
    Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down.  Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
    Still:  Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?!  Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake). 
    **banging head on table**

  • I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed.  No other programs have similar problem. Any suggestion what can be done?

    I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • HT1349 I'm trying to re-install I-Tunes on my Windows 7 computer.  I get the following error message: Service "Apple Mobile Device" failed to start.  Verify that you have sufficient privileges to start system services.  HELP?

    I'm trying to re-install I-Tunes on my Windows 7 computer.  I get the following error message: Service "Apple Mobile Device" failed to start.  Verify that you have sufficient privileges to start system services.  HELP?

    Did you try to update iTunes through "Apple Software Update"?
    Uninstall everything {iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour , Apple Application Support (iTunes 9 or later)}
    http://support.apple.com/kb/ht1923
    then reinstall itunes. (Download it from Apple's site.)

  • I keep getting the following error message while sharing my iMovie to iDVD.  "Unable to prepare project for publishing"  error (-2125).

    I keep getting the following error message while sharing my iMovie to iDVD.  "Unable to prepare project for publishing"  error (-2125).  I'm running iMovie 09 v. 8.0.6 on a iMac with OSX v 10.6.8, 2Ghz core duo, 1GB 667 Mhz DDR2 SDRAM.  Any ideas why?

    That particular error comes up for a number of reasons, sometimes it's the size of the movie you're trying to export. Bengt Wärleby a longtime contributor to the iMovie Discussion Group has advised a number of people on this error code, so I am going to link to his latest advice he's given to anyone trying to export to DVD from iMovie: Bengt's tips for great DVDs.
    Specifically, try bypassing Share to iDVD by using Share to Media Browser instead.
    In the Share to Media Browser dialog box choose the Large Size.
    When(If?) it gets through that process, quit iMovie altogehter then go to iDVD.
    Create a new project and click on the Media button near the lower right hand side of the Project Window.
    Then click the Movies button in the Browser window just above that.
    Under the iMovie star icon you should see the name of the project you shared out from iMovie.
    Drag that into the project and burn the DVD.
    If it's still to large or you get the same -2125 error code trying to Share using the Medium size instead. But again if you really get stuck consult Bengt Warleby's User tips:
    Bengt's tips for great DVDs

  • HT1926 When trying to install iTunes, I'm getting the following error "Apple Mobile Device failed to start.  Verify that you have sufficient privileges to start system services".  How do I fix this?

    When trying to install iTunes, I'm getting the following error "Apple Mobile Device failed to start.  Verify that you have sufficient privileges to start system services".  How do I fix this?

    SAME EXACT PROBLEM! SO FRUSTRATED AND ****** OFF!

  • In attempting to export a simple 1-page PDF file to Microsoft Word, I incessantly get the following error message:  "An error occured [sic] while trying to access the service."  Nothing on any of the community forums has helped in any way.  I have downloa

    In attempting to export a simple 1-page PDF file to Microsoft Word, I incessantly get the following error message:
    "An error occured [sic] while trying to access the service." 
    Nothing on any of the community forums has helped in any way. 
    I have downloaded a free trial of Acrobat XI Pro  --  and that too makes no difference.

      while trying to access the service." 
    That'd be associated with trying to connect to the server(s) for one of the Adobe online subscription services.
    (Edit PDF or PDF Pack)
    These online services are separate and independent of the desktop application Acrobat.
    It appears that you have had / are having internet connection issues.
    Be well...

  • Can't Log Any Users Onto My Domain Except the Administrator Getting The Following Error "The user profile service failed the logon"

    Hi All,
    I am currently completing a project for college which involves the creation of a domain, OU's, GPO's etc within a virtual environment.
    I am using Windows Server 2008 Enterprise running this on VMware however after having completed and tested all my GPO's now none of my users are able to log on to the domain and keep getting the following error message "The user profile service failed
    the logon" "User profile cannot be loaded".
    I have tried to a lot of different options prior to posting which include:
    Creating a new user account/s in case the previous user policies were corrupt the same error message is shown.
    I also configured my DC to allow users to log onto the DC in case this was a network issue but the same error still exists.
    My Administrator account always logs onto the DC without fail and applies all the GPO's as it should.
    I have rebuilt my servers twice now at this stage and the same problems keep happening at first it was just confined to users within a single OU but now is Domain wide any suggestions on what I can do.
    Thanks,
    John

    John,
    Since this is a project, you may have experimented with various settings in multiple Group Policies, so I would recommend you run the Group Policy Modelling Wizard, as it will show you all the GP settings down to a specific user on a specific computer, plus
    tell you which Group Policy sets and which settings, and thereby perhaps find where the problem occurs.
    Please mark as answer or vote
    as helpful when
    it applies. Thanks!

  • Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

  • I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

    I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

  • When installing CS3 Design Premium it instals Version Cue server and shared components, but I get the message "Errors: 6 component (s)" and dose not install, Photoshop, Flash, Illustrator, Indesign or Creative Suite Premium

    When installing CS3 Design Premium it instals Version Cue server and shared components, but I get the message "Errors: 6 component (s)" and dose not install, Photoshop, Flash, Illustrator, Indesign or Creative Suite Premium

    Thank you Bturko in the future only migrate/copy/transfer your documents and settings.  Adobe applications especially are not designed to be transferred from one computer to another.  It is possible to recover however.  I would recommend the following steps:
    Run the uninstaller located in Applications/Utilities/Adobe Installers
    Run the CC Cleaner Tool to ensure complete removal - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
    If you need to download a fresh copy of the installation files they can be downloaded at Download CS3 products.
    Run the installer and reinstall Creative Suite 3.

Maybe you are looking for