Getting the following message on Final Cut Express "audio only capture selected video preview disabled" how can I get the video capture back?
I'm getting the following message on screen when attempting to capture video "audio only capture selected, video preview disabled." How can I get the view preview back?
FCE doesn't allow for audio only capture, it's in a twist somewhere.
Try trashing the FCE preferences.
Al
Similar Messages
-
I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
Thank youAssuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
Regarding FCE, there is no way to download & install the product. You need an original FCE install disk and your FCE serial number.
Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store. -
I am trying to upload a pdf i created to an online system but am getting an error message indicating that my document is not formatted to 8.5x11. How can i get my document to 8.5x11
You'll want to fix this via the online system you used to create the PDF.
If all content mastering and page configuration is done online then that is where you must make a correction to what you did before.
If a file is uploaded to the online system for processing then you must revisit that file.
Open the file with its native application and correct page size there.
If you upload a scanned image to the online system you must configure the scanner software to output the needed page size.
Be well... -
I have been creating a film on Final Cut Express and half of my film has disappeared! What can I do to retrieve it?! Furthermore, command Z doesn't appear to be working! Any help would be much appreciated!
Check the capture/scratch disc to make sure the media is still there. If it isn't your hard drive may be going bad. If it is, then you may have inadvertently cut part of the video from the Timeline or deleted it from the Browser.
As for the Command z issue, see how many levels of undo you have set in FCE preferences. Also keep in mind that Command z will not work if you close the project and reopen it.
-DH -
I updated to Firefox 8.0 for Mac and when ever I try to log on to Facebook I get this error message Textarea Backup] Existing text detected in 'add_comment_text', overwrite with this backup? and then it says yes and gives you the choice of either canceling or ok and it doesn't go away when you click either button...What is going on?
It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
I have a problem with e-mail--everytime I open or push my e-mail I get the same messages delivered over again even if I have deleted them previously. is there a setting I can change that once I delete them they are gone?
Without more info, we can only guess, but most likely you're using a POP server account, and have it set to leave the email on the server after downloading (in order to make it available to other devices/clients). When you delete the email from your inbox, it just gets re-downloaded.
The solution is to set the account to delete the email from the server as soon as downloaded to your device. On the phone:
Settings > Mail,.... > your account > Advanced > Incoming Settings > Delete from server > When removed from inbox.
If you access mail with multiple devices, you should use an IMAP account. POP accounts are designed for one client only. -
What needs to be done to regain my Microsoft Office for Mac suite that I lost when I installed Mac os 10.7.3 Lion upgrade?
boyfromoz wrote:
Shootist007 wrote:
Or you could just wipe out Lion and restalled Snow Leopard. Then when you are in the market for a new computer, desktop of notebook, buy something other then Apple.
why would you say things like that here? if you are a windows one then stay there. but you are not polite or helpful and if can't use Apple i wonder why you would come here to tell all about your sad story. I don't understand that it has nothing to do with question asked.
I own, or should I say have owned, several Apple products. Including a new MBP.
I also use Windows.
I will say anything I like in an effort to help people overcome problems they are having with Mac's and computers in general.
Being a Apple Fanboy is not required for membership on this forum or trying to help other Mac users.
And just how is suggesting to remove Lion and to go back to Snow Leopard not helping the OP in his quest to make his already owned and paid for MS Office software work? If it is isn't broken stop trying to fix it. Snow Leopard is a fine OS. Lion is still in Beta, only Apple hasn't told anyone. And yes I run Lion on my new MBP but I also have a partition with Snow Leopard on it.
Thank you and have a great day. -
I got my MacBook Pro in 2004.
Over the years, I have put many files in it.
And now that it crashed, I need help to get then back.
The only problem is that I don't have another Mac, only a pc..
Please help...Hi H,
The first MBP was produced in 2006, so you either don't have a MBP or it's from 2006 or later.
You have no backup?
What "crashed?"
If the HD is good, you can put it in an external enclosure and access it with a Mac from there. -
"Unable to open project file" message in final cut express 3.5.1
I have (well had now) a project with 3 video clips and multiple .psd files as stills. When the project contains just the 3 video clips and a couple of transitions I can save the project and quit Final Cut Express and relaunch FCE and when I try to re-open the same project, it opens just fine, without any problems and just the way I expected it to be. After editing the same project for a couple of hours and saving along the way (this has happened twice now and I don't think the length of time of editing matters) and adding multiple still images to the 3 video clips (this part is new in my working with FCE); I save and quit. When I return to open the same project I get the message "Unable to open project file" and click the OK button, which is my only option and I am given a new blank project. So where did my work go???
Thank you for the response, but it hasn't worked yet...
I read the link. I am working off my internal drive.
I re-named the Capture Scratch folder, and any Render folders and then launched FCE. I was presented with a window that reads "To preserve the integrity of the data used by Final Cut Express HD, it is necessary to ensure the existance of the following path(s)" The path in the box below is where my project file and support files are. My 3 options are Quit, Check again and Reset Scratch disk. I choose the Reset Scratch Disk button and it took me to the Scratch Disk window and I Set/Created a new folder and clicked Choose and then OK back at the Scratch Disk window and Continue at the initial window... the Reset Scratch disk button is now labeled Continue. I am given a new Untitled Project work space. I tried to open my project file and once again with the message "Unable to open project file".
Where did I go wrong??? -
why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???
Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop. -
I get the following message every time I open my contacts on my iphone or iPad : "Password Incorrect. Enter the password for the Exchange account "Exchange"". If I enter my password, it does not accept it. I don't even know what this means.
http://support.apple.com/kb/ht1212
-
I recently had to get a new computer.It required me going from windows xp to 7 I am trying to put it one the new computer but I get following message Windows installer could not be accessed could be in safe mode.How do I get around it? need it to charge my ipod on my computer.
I have used PCs for years, and still do at work. But, last year my wife bought me a 15" MBP with the anti-glare screen (I was getting ready to buy for myself). It took me all of 1 week to completely get used to the UI for OS-X, and now I really prefer it over the Win7 UI. I have no experience with Win8. Here are my thoughts:
1) You can get a good computer using either a Win8 machine or a Mac.
2) You will pay less for an equivalent PC. But not as much less as some would have you believe. You need to take into account the all aluminum body of the Mac (vs most PCs being plastic) and the size of the display. And, don't forget that there is a lot of bundled SW on the Mac that you will actually find useful and would have to purchase for the PC.
3) You can probably do everything you need on the PC platform with the right SW (you probably already know this since you are using one already).
That said, I think some things are easier on the Mac. For example, GarageBand is a standard part of the Mac SW installation. I got up and running recording directly from my bass into a track with a song imported from iTunes on another track in a snap. I only had to purchase a Jam adapter ($99) for the bass so I could come in over USB instead of using the audio in port (which did work, by the way). You can do the same on a PC, but you have to purchase the SW from somewhere. And, it probably isn't cheap.
I use VMware Fusion to run those Win programs I already owned because it was much less expensive to buy Fusion than to replace them.
I would not return to a PC for my own use, given a choice. But, I would be very careful about getting my wife a Mac without careful thought as she is not as tolerant of learning new things as I am.
So, there you go. -
Final Cut Express: Audio question. Please help!
Hi, I'm new to Final Cut Express and I have a random question.
I have a 2 minute video that I put into my timeline sequence. I added photos over some of the video and now I decided that I want to delete the rest of the video and audio since 2 minutes is too long. Well, now it will allow me to delete the video but not the audio. Does anyone know how to make in/out points for just the audio? and to cut it? Every time I make an in/out point, it only allows me to do it for the video. Now, I have this two minute-long audio that I need to get rid of that I just can't seem to delete/cut.
If anyone out there can help me, I'd greatly appreciate it! Thanks.
~AliceYou're making In and Out points in the timeline right? Make sure the autoselect buttons are black for the tracks you want to select.
-
I have tried many times to download creative cloud desktop app such as AI, LR, PS, ID and so on. the following message appears You are running an operating system that Illustrator no longer supports. Refer to the system requirements for a full list of supported platforms. The only one I have succeeded to download are DW and MU.
Please could you help outHello,
please have a look at the different sys-requirements for example:
AI: http://helpx.adobe.com/illustrator/system-requirements.html
PS: http://helpx.adobe.com/photoshop/system-requirements.html
(LR 1-5: http://helpx.adobe.com/de/lightroom/system-requirements.html)
You will find the same explanations for your other programs.
Hans-Günter -
My Photoshop Elements 11 has suddenly lost contact with my CanoScan 9000F with the following message..."CanoScan 9000. software for this device could not be launched. The drive is not connected or is busy." How do I regain connection?
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Maybe you are looking for
-
I download the new IOS7 in my iPad beeing in the usa And where I come back to my country appears me again to upad te my iPad of ferina the IOS 7. I did it my iPhone And is not working as before.what i must do
-
Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?
-
Functional specification and logic flow for smart form PO
Dear Friends , For PO develelpment in smart form as per client requirement which are the details we need to give for developers . I had given only table and fiels name for the displaying elements in PO , message type , document type . They are asking
-
Migrating existing Developer 6.0 application to Oracle 9iAS
Hi everybody. I am using HP-UX 10.2 (Unix) as my OS for running Oracle 8.0.2. All my application users are in Windows 98 using Developer 2000. Now my concern is I want to bring in an application server (Oracle 9iAS) and make all the users use this ap
-
Hi Sap gurus.. I hav created infoset in sq02 and there i used tqo tables A589 AND KONP.. There i need to get values according to condition.. First take data from A589 with given selection criteria and A589-KFRST = ' ' and (A589-DATBI > X_DATE ) and