Getting The Video and Audio Synced Up

I have a the weirdest feeling that the audio and video are not perfectly synced up. It may only be by a frame or two. In final cut pro, I can go frame by frame and hear where the audio should be and correct it. Can this be done in DVD studio pro? Is there any other way to check? It is nothing big, but I would really love some assurance that they are together. I have DVDSP 3.

Tyler Routson wrote:
I have a the weirdest feeling that the audio and video are not perfectly synced up. It may only be by a frame or two. In final cut pro, I can go frame by frame and hear where the audio should be and correct it. Can this be done in DVD studio pro? Is there any other way to check? It is nothing big, but I would really love some assurance that they are together. I have DVDSP 3.
DVD SP is not designed for that type of precise editing, just some general things, and you are better off doing all edits outside of DVD SP. Where are you seeing the synch problem?

Similar Messages

  • I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I see my buddy, but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies.

    After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I.  We are able to do video chat through gmail, but I had hoped to use iChat.  I am using OS 10.6.8, iChat v. 5.0.3.  What am I missing?

    HI,
    iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
    However it will not Video to the Web Page login to iGoogle or the Web Mail Page login.  (where people can Google Chat as it were in a  Web Browser).
    Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
    iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
    Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
    Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
    More on this here  This article has been changed several time in the recent months.  It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
    This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
    If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
    In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
    It could be Internet speed but at this stage I would doubt this at this stage.
    10:27 PM      Saturday; January 21, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync.  They work fine when played in Quicktime.

    Hello,
    I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program.  It appears to work fine in Quicktime.
    Thanks in advance.

    mbgoodwi
    Thanks for the reply. This is the plan.
    Open Premiere Elements 12/12.1 to the Expert workspace.
    In the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, select the project preset
    NTSC
    AVCHD
    AVCHD LITE 720p30
    OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
    Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
    Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
    into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
    Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
    There should be no colored line over the content if the project preset matches the video properties. But, if you do see
    that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
    the Render button above the Timeline.
    Do your video/audio now play back in the Edit area monitor in sync?
    Please let us know the result, and then we will decide what next.
    Thanks.
    ATR

  • I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips?

    I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips? This is not hack/ripped video but a legit home movie.

    In this case, it looks like Quicktime wasn't very efficient in managing memory, leading to a slowdown in playback. If QT has a lag and VLC doesn't, that's more evidence.
    I couldn't say why your friend's windows computer plays the media fine, while your Mac doesn't. The only thing I could suggest is to disable QT streaming video - which has been known to slow down performance.

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • How can i fix a clip when the video and audio are not matching up?

    How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

    I would try detaching the audio and the dragging the audio to the left or right until it lines up.

  • Can we capture the video and audio using cam and microphone in Edge Animate?

    Hi Everyone,
    I got a new requirement from the client to create a HTML5 based functionality through which one can capture the video and audio using his web-cam/camcorder and microphone. I have researched on internet and found that there is api available (not reliable) http://www.html5rocks.com/en/tutorials/getusermedia/intro/ . I am not a coder by profession and use Edge animate to create HTML 5 based animations and stuff like that. Another problem which i have found that the api only works well with Chrome and Opera and not with Mozilla, IE..
    Can anybody help me out in this, please...
    Thanks & Warm Regards
    Vikas

    Hi, Vikas-
    After a brief bit of research, you're definitely hitting upon the limitation of the browsers.  Not all of the browsers have implemented this part of the HTML5 standard, so you're going to either have to use Flash or be limited to these specific browsers.
    Thanks,
    -Elaine

  • I get silent audio after i separate the video and audio

    I'm using vintage video that I downloaded from the Internet.  in one project I separated the audio and video, ditched the audio, and exported, via share, the visual clips I need for my final video.  in a new project, I imported the segments to place over the audio I created with music software.  the segments have a silent audio, that is, it has a part that goes on the audio track, but it's silent.  it covers my audio and I can't hear it.  I don't know why this happens or how to avoid it.  help!
    Thanks,
    Rosateresa

    Rosateresa
    What version of Premiere Elements are you using and on what computer operating system is it running? Are you working with sources that come with copyright? For now I will assume no copyright protection involved.
    I understand what you are doing through the point that you get rid of the original audio of a video file that has audio linked to it.
    And, further I understand that you bring just that export video portion into a new project which has your "audio ...created with music software".
    But after that I need clarification.
    1. I would expect that, in the new project, you import the video to Video 1 to relate to the music that is already on Audio 1 or the Soundtrack.
    I lose you when you write
    the segments have a silent audio, that is, it has a part that goes on the audio track, but it's silent. it covers my audio and I can't hear it.
    2. I am wondering if you are really saying that when you export the video portion of your file, the export has a video and audio component (silent audio component)? If that is the case, in the export settings under the Advanced Button of the export preset selected, place a check mark only next to Export Video. Remove the check mark next to Export Audio.
    See example below from Premiere Elements 12 Windows. On the left...Export Settings and the Export Video and Export Audio boxes for check mark as needed. In the example I have a check mark only next to "Export Video".
    3. But you can do everything in the same project, I would think. Right click the video with its linked audio, select Delete Audio. And then import your music into
    that same project.
    ATR

  • Can you import a Podcast into iMovie and get both video and audio?

    I have iMovie 11 and Garage Band '11.  I created a podcast in Garage Band that I now would like to use in iMovie.  I would need the video and the audio to work.

    You might be able to get it to work but I would not recommend it. You would need to export the Aperture slideshow as a QuickTime Movie using h.264 codec or Apple Intermediate Codec. You would need to make sure that the slideshow was on a timed advance, not manual advance. It would be a single clip, and not easy to insert transitions, etc.
    The best way to import from Aperture would be to create an Album in Aperture containing all the photos you want in the order that you want. Then, you can drag the whole album into iMovie with one drag from the Photo browser in iMovie. You will want to drag the small icon for the album into the Project. You will have all your photos in order, but you can edit them individually and add transitions and titles.

  • When I switch between "normal" and fullscreen in a youtube video, the video and audio stops for a half second. Any solution?

    It is only present in firefox. Did reinstall whole windows 7 also, still have the problem :(

    Hello,
    This could be related to the graphics card taking some time to display the flash video. Can you please check and confirm if you are seeing this issue when you use the HTML5 player of YouTube. To do that, you can do the following
    #visit the [http://www.youtube.com/html5 HTML5 page of YouTube]
    #Select the 'Request HTML5 Player' option
    #Try viewing the video and see if the issue is happening
    #You can switch back to the flash based player by revisiting the page and selecting 'Use the default player'
    Please try that and let us know if the issue is recurring or not.
    Thank you

  • When I trim a Video in QTpro, the video and audio become out of sync

    I use mpstreamclip to export video to mov or mp4 files. When I load up on QT pro and then do some trimming, the resultant clips often have audio and video that are slightly out of sync.
    Can anyone provide some guidance on what to do?
    Thanks so much.
    Skip

    I think it is going to be a problem with the fps setting on export. If you entered 30 fps as the setting for export and you found the result had the audio getting further and further ahead of the video the longer you watched it may be that you needed to enter a frame rate of 29.97 fps to keep things in sync. I am doing similar tests on some conversions because I have had sync problems as well. I will repost when I check my current export at 29.97 fps.

  • The video and audio are out of sync while watching movies with iTunes

    Anyone know why iTunes is playing movies out of sync?  I try to watch a movie on my pc with iTunes but the audio is faster then the video. 
    I have searched for an answer everywhere but haven't found one yet, so if someone could please help.
    It is updated as of this post with 10.6.1.7

    Repair your QuickTime.
    Control Panel > Programs n Features > highlight QuickTime, click CHANGE then REPAIR

  • Video and audio sync

    I am currently having issues with the audio for shows and movies being out of sync while playing only through ITunes.  I have Windows 7 and am using the Asus P6T motherboard's Realtek audio.  I don't have any issues playing through windows video player, just iTunes and quicktime.  I've tried all of the FAQ recommendations to include turning off sound enhancements and updating software for motherboard audio.  Does anyone have any other ideas of how to get the audio and video to sync?  Thank.

    What are you editing, and does your project match your video?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • After I create a flash swf file how do I edit the video and audio?

    I created a nice flash animation, but it appears there are no video editing program which edit swf files.
    Why would flash create a file that cannot be edited in video editing programs including their own premiere pro?
    I have to get a program to convert the swf to an flv file and then I can use a video editing program?
    I tried exporting it to an avi, but much of the functionality was lost. I am looking at a man standing there instead of
    moving his lips while talking, for example. Am I missing something? Please advise. Thanks!

    If you have an swf file then you don't have a video to edit. You can export to a limited number of video formats from Flash. In order to do that successfully, you need to prepare your file so that it will export as you want. This means that you will have to produce the entire file as a linear sequence using the timeline and with no interactivitiy. You can use a limited amount of Actionscript, but it is a very small subset of the available language. Your audio must be in the timeline.
    Here is an Adobe help file for exporting to video: Flash Professional Help | Exporting Graphics and Videos

Maybe you are looking for

  • Can and how do you connect multiple apple IDs to Apple TV?

    I would like my roommates to be able to share their music through my Apple TV unit, is this even possible and if so how? Thanks for your help! iPad4, iphone4s, iphone5 (2 roommates)

  • Multiple quicktimes on same page, same place

    Hopes this makes sense but what I would like is a blank white page with multiple "text menus (hyperlinks)" on the left side of the page that when selected will activate appropriate quicktimes that will then open on the same page, but on the right sid

  • How to cancel email notification from snapshot and simulation

    Hi, We've activated workflow template WS28700001 so that email notification can be triggered when task release. Meanwhile we are using snapshot and simulation at the same time. But when saving sanpshot or simulation the tasks which have status of rel

  • How to find out resolution of an image?

    Hi, all Most common image formats (DIB, JPEG, PNG, TIFF and perhaps others) store the resolution of the image in pixels per inch (or other, similar units). I haven't found a way to find out this information using the Java libraries. Neither the AWT i

  • How to use encryption?

    Hi all, After installing Oracle db 11.2.0.1 on my Win7 laptop, I got the following completion message: The Database Control URL is https://localhost:5500/em Management Repository has been placed in secure mode wherein Enterprise Manager data will be