GETWA_NOT_ ASSIGNED, Field symbol not yet assigned yet.

Hi,
I am working in an Upgrade project,, from 4.6 version to ECC version.
A program is going into a short dump.
On debugging th program, I identified that there is a problem with a function module which triggers a standard include and this is where i am getting the error. the function module is supposed to populate a internal table is not populating it. the dump shows that the error is there in the assign statement shown below.
<fm03> type any.
<field> type any.
assign <fm03> to <field>.
can anyone help me out with this?

if the program is a custom one then after assignment pl. check sy-subrc value
like:
assign <fm03> to <field>.
if sy-subrc = 0.
Normal processing
else.
Error handling here*
endif.
And for std. program search for notes if u think it is a bug in the program.
Regards,
Joy.

Similar Messages

Short dump GETWA_NOT_ASSIGNED field symbol not been assigned

Hi Gurus,
I am calling a RFC BAPI_PBSRVAPS_CHANGEKEYFIGVAL2 from R/3 sytem to SCM 5.0.
Acutally this FM BAPI_PBSRVAPS_CHANGEKEYFIGVAL2 not available in R/3 system.
So i am using scm destination and calling above FM directly from R/3 but i am getting the short dump
in SCM system as GETWA_NOT_ASSIGNED field symbol not been assigned.
Can you pls check and advise.
Best Regards,
Radhakrishna.

Hi Radhakrishna,
It looks like you have a discrepancy in the planning area with respect to keyfigure. Some thing like the key figure description is not synchronized between live cache and db.
I suggest you log onto your SCM system, run the program /SAPAPO/TS_LCM_CONS_CHECK on your planning area with correct error option.
Please let me know if this works.

RSBBS: field symbol not yet assigned

Hello Gurus,
I have a RRI for a query jumping to another query.
But after doing some minor changes to the child and parent query, while executing the jump, an error message comes
' Fiel;d symbol not yet assigned'.
Its details mention '<internal error> Cannot determine text element for the current query;.
Please guide me as to what can be the issue and how to resolve it. I am new to RSBBS.
Regards,
NIKEKAB

Hello,
I have changed the assignment details as the type mentioned for a field was Table field (used for non BW jumps), to Generic.
This helped me see the receiver query name when I click on GOTO.
But even now I get the same error i.e. Field symbol not yet assigned.
I went through some other posts but did not find answer to my doubt.
Any other solution.
Regards,
NIKEKAB.

Issue with field symbol not assigned in SMQ2

We are facing an issue with an error in SMQ2.
The error is "field symbol not assigned". There is also short dump in ST22.
I have read the previous forum threads and it talks about going into the debugger mode.
However, which is the program to be debugged ?
How do I navigate from SMQ2 to the ABAP program.
Kindly let me know.
Regards,
Sanjay

Hi Sanjay,
You need to debug program RSTRFCM3. This is the program which drives SMQ2.
However just check if there are any support pack upgrades to the program recently since this is a standard program.
Regards
Abhii

Error in drill down of RRI- Field Symbol not assigned

Dear all,
I am trying to call a SAP transaction on click of the jump target. I have created the jump target in the following way ..let me know if I am wrong ..
Goto RBBS transaction . Specifed the sender report as 0SD_C01/0SD_C01_Q025 (Sales Volume Analysis) and target as r/3 client 210 and specifed the transaction Va01 as target.
But when I executed the report and did a right click ..on the context menu I coudl see the desription of the Jump target I have created and upon clicking I received a error ..field symbol not assigned ..
Can any let me know the cause of the error ..and how to resolve.. do i need to give any extra parameters while creating jump target..
Thanks,
Gupta

Hello Gayathri,
One you got the dump you can select debugger button in top-left corner screen.
That will take you to the execution snap shot where you can check all the field symbols and find out which one is not
assigned. accordingly you can find out what is missing on input side to avoid this dump.
Hope this helps!
Thanks,
Augustin.

Field Symbol not assigning

Here is my code
field-symbols: <itfieldname> type any.
DATA: lw_fieldname LIKE ztfi_acctmap-zzfnam.
            lw_fieldname = wa_ztfi_gl_acctmap-zzfnam.
            ASSIGN (LW_FIELDNAME) TO <ITFIELDNAME>.
            <itfieldname> = <lfs_excel>-value.
After the assign, <itfieldname> is not being assigned. I have copied this from a different module. The same code works there but not in my program.
Any clues please?
Thanks,
Kiran

Kiran_ABAP wrote:
Here is my code
>
> field-symbols: <itfieldname> type any.
> DATA: lw_fieldname LIKE ztfi_acctmap-zzfnam.
>             lw_fieldname = wa_ztfi_gl_acctmap-zzfnam.
>             ASSIGN (LW_FIELDNAME) TO <ITFIELDNAME>.
>             <itfieldname> = <lfs_excel>-value.
>
>
> After the assign, <itfieldname> is not being assigned. I have copied this from a different module. The same code works there but not in my program.
>
> Any clues please?
>
> Thanks,
> Kiran
For the ASSIGN statement to work, you must make sure that the value in the lw_fieldname is declared as a data object in your program as shown below...
FIELD-SYMBOLS: <fs_value> TYPE ANY.
DATA: lv_fname TYPE char30 VALUE 'TARGET_FIELD'.
DATA: target_field TYPE i.
ASSIGN (lv_fname) TO <fs_value>.
IF <fs_value> IS ASSIGNED.
<fs_value> = 10.
WRITE: target_field.
ENDIF.
In the code above, if you comment the declaration of the target_field the ASSIGN statement will not work.
-Rajesh.

Field symbol not assignned

Hi,
   i have created my own field catalog and assign to
reuse_alv_list_display fucntion module but i am getting execption 'field symbols not assigned' can any body help me in solving this problem
pls give a simple alv program usign own field catlog and list display.

Code for own catalog
*& Report ZMBKN_ALV_FIELDCATALOG
REPORT ZMBKN_ALV_FIELDCATALOG.
TYPE-POOLS SLIS.
DATA : BEGIN OF ITAB OCCURS 0,
       MATNR TYPE MARA-MATNR,
       MTART TYPE MARA-MTART,
       MATKL TYPE MARA-MATKL,
       TEST TYPE C,
       END OF ITAB.
SELECTION-SCREEN BEGIN OF BLOCK B.
PARAMETERS : VALUE TYPE I DEFAULT 20,
             R_VALUE1 RADIOBUTTON GROUP G,
             R_VALUE2 RADIOBUTTON GROUP G.
SELECTION-SCREEN END OF BLOCK B.
DATA : IT_FCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FCAT TYPE SLIS_FIELDCAT_ALV,
       IT_HEAD TYPE SLIS_T_LISTHEADER,
       WA_HEAD TYPE SLIS_LISTHEADER,
       WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
START-OF-SELECTION.
       PERFORM FORM_LAYOUT.
       PERFORM FIELDCATALOG_DATA.
       PERFORM GET_DATA.
IF R_VALUE1 = 'X'.
       PERFORM DISPLAY_LIST.
ELSEIF R_VALUE2 = 'X'.
       PERFORM DISPLAY_GRID.
ENDIF.
FORM GET_DATA.
       SELECT * FROM MARA INTO CORRESPONDING FIELDS OF TABLE ITAB UP TO 30 ROWS.
ENDFORM.
FORM DISPLAY_LIST .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
   I_CALLBACK_PROGRAM             = SY-REPID
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
I_STRUCTURE_NAME               =
IS_LAYOUT                      =
   IT_FIELDCAT                    = IT_FCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IR_SALV_LIST_ADAPTER           =
IT_EXCEPT_QINFO                =
I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
TABLES
    T_OUTTAB                       = ITAB
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_LIST
FORM DISPLAY_GRID .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   I_CALLBACK_PROGRAM                = SY-REPID
   I_CALLBACK_PF_STATUS_SET          = 'FORM_PF'
   I_CALLBACK_USER_COMMAND           = 'FORM_USER'
   I_CALLBACK_TOP_OF_PAGE            = 'FORM_TOP'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
   IS_LAYOUT                         = WA_LAYOUT
   IT_FIELDCAT                       = IT_FCAT
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = ITAB.
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_GRID
*&      Form FIELDCATALOG_DATA
      text
--> p1        text
<-- p2        text
FORM FIELDCATALOG_DATA .
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-FIELDNAME = 'MATNR'.
WA_FCAT-REF_TABNAME = 'MARA'.
WA_FCAT-REF_FIELDNAME = 'MATNR'.
WA_FCAT-OUTPUTLEN = 10.
APPEND WA_FCAT TO IT_FCAT.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-FIELDNAME = 'MTART'.
WA_FCAT-REF_TABNAME = 'MARA'.
WA_FCAT-REF_FIELDNAME = 'MTART'.
WA_FCAT-OUTPUTLEN = 10.
APPEND WA_FCAT TO IT_FCAT.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-FIELDNAME = 'MATKL'.
WA_FCAT-REF_TABNAME = 'MARA'.
WA_FCAT-REF_FIELDNAME = 'MATKL'.
WA_FCAT-OUTPUTLEN = 10.
APPEND WA_FCAT TO IT_FCAT.
WA_FCAT-TABNAME = 'ITAB'.
WA_FCAT-FIELDNAME = 'TEST'.
WA_FCAT-SELTEXT_M = 'SAMPLE'.
WA_FCAT-OUTPUTLEN = 10.
WA_FCAT-EDIT = 'X'.
APPEND WA_FCAT TO IT_FCAT.
ENDFORM.                    " FIELDCATALOG_DATA
FORM FORM_LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " FORM_LAYOUT
FORM FORM_TOP.
WA_HEAD-TYP = 'H'.
WA_HEAD-INFO = 'INT'.
APPEND WA_HEAD TO IT_HEAD.
WA_HEAD-TYP = 'S'.
WA_HEAD-INFO = 'ROAD'.
APPEND WA_HEAD TO IT_HEAD.
WA_HEAD-TYP = 'A'.
WA_HEAD-INFO = 'SAP-ABAP'.
APPEND WA_HEAD TO IT_HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
    IT_LIST_COMMENTARY       = IT_HEAD.
I_LOGO                   =
I_END_OF_LIST_GRID       =
I_ALV_FORM               =
   CLEAR IT_HEAD[].
   ENDFORM.
FORM FORM_PF USING T_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'TEST' EXCLUDING 'STANDARD'.
ENDFORM.
FORM FORM_USER USING UCOMM TYPE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
CASE UCOMM.
WHEN 'SE11'.
CALL TRANSACTION 'SE11'.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDFORM.
Edited by: Muthappan Alagappan on Apr 22, 2008 4:53 PM

Field-symbol not assigned

Hello,
I speak only a bit so I wait that you can understandme.
I have a field-symbol that is assigned to a component of a structure but when I use the field-symbol I recived a error message that say me "field-symbol is not assigned".
field-symbols <ubi> type any.
campo = 'UBIORI'.
assign component campo of structure
t_cuantos to <ubi>.
Thank you very much.

H,
Put a check as follows:-
field-symbols <ubi> type any.
campo = 'UBIORI'.
assign component campo of structure
t_cuantos to <ubi>.
if <ubi> is assigned.
* do further processing here
endif.
How is the structure t_cuantos defined?
Is it having a field named UBIORI?
t_cuantos should be a workarea(structure) and not an internal table.
Check the points and reply.
Regards,
Ankur Parab

Field Symbol not assigned error

Hello all...
I am a functional BI guy but having some problems with some BPS exit code (in charisteristic relationships) ...
any idea why I would get a 'field symbol not assigned' error with the below?
The code is straight out of How to: Lines Items in BPS
Short dump says: GETWA_NOT_ASSIGNED
Thanks all
*"*"Local interface:
*" IMPORTING
*"     VALUE(I_AREA) TYPE UPC_Y_AREA
*"     REFERENCE(ITO_CHA) TYPE UPC_YTO_CHA
*" CHANGING
*"     REFERENCE(XS_CHAS) TYPE ANY
*" EXCEPTIONS
*"      FAILED
FIELD-SYMBOLS: <l_chavl> TYPE ANY.
* fill ID
ASSIGN COMPONENT 'zbpsguid' OF STRUCTURE xs_chas
TO <l_chavl>.
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = <l_chavl>.
* fill user
ASSIGN COMPONENT '0UNAME' OF STRUCTURE xs_chas
TO <l_chavl>.
<l_chavl> = sy-uname.
* fill date
ASSIGN COMPONENT '0DATE' OF STRUCTURE xs_chas
TO <l_chavl>.
<l_chavl> = sy-datlo.
* fill time
ASSIGN COMPONENT '0TIME' OF STRUCTURE xs_chas
TO <l_chavl>.
get time field <l_chavl>.
ENDFUNCTION.

i just figured it out when you sent me your reply...
it works!
genius!

Assignment field is not getting populated in KSB1 for posting key 50

Hi All,
We are uploading entries thru excel in SAP.
For posting key 50 assignment field is not getting populated in KSB1.
But for posting key 40 it is getting populated correctly.
All setting (FSG, posting key details) are same for both the keys.
No substitution defined in SAP.
There is no issue for FBL3N for both the posting keys, only issue with KSB1.
Any idea what could be the reason for this?
Thank you.
Akash

KSB1 is CCtr report..
if it is revenue normally it will be treated as statistical posting in CCtr accounting- for the cost element when it is defined as revenue element.. - check Cost elements - whether it is Cost and cost reducing or revenue element--
possibility this can be one of the reason.
check and confirm

Assignment field is not picking from GL

Dear All,
We are posting one real estate document with reference of the contract number. But when we see the FI document assignment field is not updating from GL which we maintained in sort key.
In that FI document we have 4 line items but one line has got updated assignment which we maintained in GL as a sort key.
Anyone have a idea please replay.
Regards,

Hi,
It should pick the field value based on the sort key maintained.
What is the sort key maintained in the GL in which line item the assignment field is empty.
You can check your self as below:
Goto TCODE : OB16
Goto the Sort key for which the data is missing.
Select that and check the field maintained in that.
Check the data of that field in the BSEG/BKPF.
It should pick based on the data in that field.
OTHER POSSIBILITES:
Check the Substitution using the TCODE : GGB4 for the field BSEG-ZUONR
OR
any user exit.
VVR

Runtime error "field symbol not assigned"

hi friends i have designed a report in alv form. and there is one runtime error afer user selectin screen.
"field symbol has not been yet assigned"
what could be the problem

Please check the field catalog you have created
ls_fieldcatalog-tabname = 'GT_FINAL'.
ls_fieldcatalog-fieldname ='PSPNR'.
* ls_fieldcatalog-coltext = text-001.
ls_fieldcatalog-col_pos = 1.
* ls_fieldcatalog-do_sum = 'X'.
* ls_fieldcatalog-outputlen = 20.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
CLEAR ls_fieldcatalog.
or if you are using filed symbols than
ASSIGN COMPONENT 'GTFINAL' OF STRUCTURE gt_final
thanks

Field Symbol not assigned error in program SAPLLPRI

My problem is, I have copied standard program RLVSDR00 in to some ZRLVSDR00 and made some changes accordingly.
while executing I am geting a short dump with error: " GETWA_NOT_ASSIGNED" and "Field symbol has not yet been assigned" in program SAPLLPRI in the include LLPRIF00.
Thanks in advance

Hello Gayathri,
One you got the dump you can select debugger button in top-left corner screen.
That will take you to the execution snap shot where you can check all the field symbols and find out which one is not
assigned. accordingly you can find out what is missing on input side to avoid this dump.
Hope this helps!
Thanks,
Augustin.

BPC NW: Field symbol not assigned in BADi as Endroutine

HI Experts,
I have a problem when working with BADis as Endroutines in a TransformationFile.
Guided by the "How To... Use Start and End Routine" I followed the different steps and for the Start Routine everything works fine. My problem is when trying to call the TransformationFile with the Endroutine I get a GETWA_NOT_ASSIGNED dump telling me that: Field symbol has not yet been assigned.
I'm using quite the same code as given in the How To. I introduced some checks, but I did not get any positive results. Can anybody help, please? The How To is made for master data, I assume the error comes from this side, but I can't assure it.
The code in the Badi is:
field-symbols:
       type any.
data: lt_columns type table of string.
data: lt_column_data type table of string.
data: lt_message type uj0_t_message.
data: lt_error_reason type uj0_t_message,
      lv_tabix like sy-tabix.
data:
      lo_dataref      type ref to data,
      lv_cuenta_asig type zmap_cuentas-cuenta_asignado.
Assign importing data reference to field symbol
assign ir_data->* to IS ASSIGNED.
Create work area for importing data
create data lo_dataref like line of .
Create new internal table for exporting data
check .
Get CUENTA value from custom table or other datasource
loop at .
The error occurs when assigning the first pointer.
By the way, I'm working on BPC 7.5 SP07 for NW.
Hope someone can help. Thanks very much in advance,
Àlex

Hi Kaylan,
thank you very much for your quick answer.
Sorry, I think I haven't made quite clear my point.
I want to use the Endroutine BADi in a Transformation File for Transaction Data, therefor there is no InfoObject directly involved. I use the Transformation File in the Package "Import Transaction Data". The How To I mentioned, and the only one I found that is more or less near to my problem describes how to use Endroutines and BADis for the Import of Master Data.
Looking at the different tests I have done, as our system team is not giving us a debug user, the dump happens at the assignment of the first field symbol: assign ir_data->* to . Therefor I assume that ir_data contains no data and this causes the dump.
My main question is, can I use the code of the mentioned How To for the package "Import Transaction Data" at all? Or do I have to use different tables or table names for this package? How and where do I get them?
You have an idea? Would be very helpful! Thanks in advance!
Cheers
Àlex

Error: Field symbol not assigned

Hi all,
When I run a query (BW version 3.5) with a condition or an exception I receive an error message "Field symbol has not yet been assigned". The same query run fine on BW version 3.1.
SP 11 and SP12 are installed.
Any idea how to solve the problem??

Paolo,
Note 555143 can not be implemented. Probably because I am working in BW version 3.5 instead of BW version 3.1.
Thanks anyway.
Regards,
Hans

GETWA_NOT_ ASSIGNED, Field symbol not yet assigned yet.

Similar Messages

Maybe you are looking for