GI for every Operations, not for whole production order

Hi,
I have assigned the components into operation and would like to do goods issue for every operations.
But MIGO or MB1A only do goods issue for whole production order, there is no selection fields for operation no.
How can I only do the good issue for production order by operations?
thank you very much.
Best Regards,
John H

Hi,
You can do goods issue for each operation using backflushing while confirming each operation.
In CA02 that is in routing go to component allocation select the components which you want to issue for certain operation and select new assignment. In new assignment select the operation.
In the same manner select the components which you want to issue and assignment it to operation.
Hope it will help you.
Regards,
Alok Tiwari

Similar Messages

In ALV: Subtotals for every month, not for every day, possible?

Hello,
in my Alv-Grid I have a date column, which I want to use to generate subtotals. But I don't want to have a subtotal for every date, but for every month. Is there a method to accomplish this with subtotals? Thanks.
Regards, Lars.

Hi Stembergg,
1. Its not possible with only date field.
2. However, if you have one EXTRA FIELD
   which contains the Month
   only then it is possible.
( You may hide this extra field if   u don't
won't to display. But anyhow, u need to
modify your logic and the internal table
   and accordingly populate the extra field)
3. There is contraint in alv
    that we cannot use any function for any column value
    for any claculation/grouping purpose.
Hope it helps.
Regards,
Amit M.
Message was edited by: Amit Mittal

Actual activity price not updating in production order

Hi All,
I am facing one problem, that actual price for activities are not updating in production order while plan price are updated. Earlier both plan and activity prices were getting upadated but now actual price is not updating for any material. I have tried at the same material also but it is not getting updated. Actual hours are updated in confirmation of production order but not price. If somebody could suggest the reason it will be great.

Dear Nitin,
Thanx to all for valuable input. Problem is solved.
Nice to see That your problem is solved
But Can you let the Forum Members know
where was the exact problem & how it is solved
Regards
Madhu Kumar

InDesign "Save As" dialog box for every operation in INDB book file; updating page numbers, etc.

So I haven't used INDB files in awhile in InDesign, and today was the first time I attempted to adjust an old INDB (created originally with CS5). For every operation of adjusting the book file, such as updating page/section number or adding/removing an INDD file I get a Save As dialog box for each constiuent INDD file. This is quite annoying since the book has lots of INDDs, and I have to click through the tedious save as with each. I previously worked with INDBs in CS5, and never encountered this, there was no need to save each INDD in the book just to update the page numbers. I tried creating a new INDB in CS5.5 thinking that maybe it was because I was working from a file created with an older version of InDesign. Does anyone know if there is a way to suppress the Save As dialog? Another thing I noticed that is supremely frustrating is that this new build of InDesign doesn't default to saving the file in its original location, and I have unwittingly ended up saving files in other places, only to later realize it. I am using InDesign CS5.5 Ver. 7.5.2 on Mac OSX 10.7.3 Any help is greatly appreciated.

It will only happen once (and frankly, what you are doing is a very bad idea).
When you open the old book in CS5, you are converting to the new format. All of the legacy files also need to be converted, even if added to a new book in CS5.5, hence the Save As since ID will not overwrite the old versions until you tell it to (and that's the bad idea). I strongly recommend (though it's too late for any books you've already updated and overwritten) that you either continue to edit in the old version, or that you take the time to open each file in the original version if it's older than CS5, then export to interchange format (.inx or .idml, depending on version), open those files in CS5.5, save with new names so you don't overwrite anything, then add to a new book and proceed.
One of the reasons I recommend this seemingly time-consuming approach is that there are too many reports (another one yesterday) of some sort of problem that pops up late in the editing cycle when converting legacy files to CS5/5.5 by opening them directly and saving. This is a belt and suspenders insurance approach, and is far less labor intensive than starting over, which might end up being your other option down the road if something goes wrong.

Can't listen for connections - Operation not supported

Hi,
We have install OSB Client on HP-UX 11i V2 HP rx5670 Server as per Oracle Secure backup Installation Guide.
But we are getting following error message. Please help us to solve the issue:
2010/12/29.10:23:02 can't listen for connections - Operation not supported
# /sbin/init.d/OracleBackup start
Starting Oracle Secure Backup services daemon.
2010/12/29.10:23:27 can't listen for connections - Operation not supported
Thanks
Khairul/Bangladesh

Have a look at the observiced.log file to see if that has any more detail, this is in /usr/tmp.
I would check to see if there is something else on the system that is using TCP port 400 or 10000. On Solaris I've seen the webmin installation using port 10000. Both those ports need to be free for OSB to be able to start.
With OSB stopped, you can "telnet <hostname> 400" and "telnet <hostname> 10000" to see if it connects. If it does then something is listening on that port.
You should be able to do "netstat -na" as well, to show you listening ports.
Rich

GR for production order post to cost center and not to the production order

Hi all,
when we post the goods receipt for the finished product against the production order (mov. type 101), the order is not credited with the corresponding stock value. Instead of this, the value accounts to a cost center.
We specified this cost center in OKB9 (Default account assignment), because if not, we get an error when posting the goods receipt cause of lacking accounting object.
I can't see why the system does not credit the production order?
Any ideas?
Thanks for your time
Daniel

Hi Daniel,
This is the first time i am coming across an issue like this.
neverthless from a logical front,
1. Remove Cost center as a valid receiver in Settlement Profile.
2. Your OKB9 setting are pretty much good. No need to worry about it. Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
3. Check the Settlement rule when you have created Production Order. It should have been MAT.
4. I hope you are creating Production Order with Material (using CO01 and not CO07)
5. Make sure in OPL8, the default rule in controlling tab is PP1.
Once all these are fine, i do not see any reason why you will get your probelm.
Please check and revert back to me if the problem still persists.
Best Regards
Surya

WHY FREE ITUNES PRODUCTS ARE AVAILABLE ONLY FOR USA AND NOT FOR OTHER USERS OUTSIDE USA

I am so impressed wit the welcome page saying "Join the conversation. Share tips and solutions with fellow Apple product users from all around the world."
Apple mentioned for their products users around the world but many of their free itunes products are available only for USA and not for the users from the other side of the globe?
Is this Apple a fair and customer oriented company or full of bias and Only money oriented company.
If apple could not make thier other FREE stuffs available outside US territory then better for thsi company to just sell their products in USA. its just so disgusting... If we need a certain apps (FREE APPS) available only for US based users.
If you think US users and other country users are paying the same prices for their iPad 3G/4G WIFI 64GB and iPhone 3G/4G 64 GB like hat I did having the 2 gadgets altogether but my investment ends to disgusting as the apple company cound not treat people equal then..... I want to return all this **** stuffs

iTunes for Different Countries
iTunes Store: Which types of items can I buy in my country?

No of operations in routing &Overlapping not reflection in Production order

Greeting for all gurus.
Process
We have three set of operations , one will be blend, , other will be cured and the third will be finished goods.
Basically one FG and three components , the components will be consumed in the first process. The same FG materials will be used for the 2nd / 3 rd Process
,1) we want to confirm the first set by making auto GR/GI
2) The Overlapping is 8 weeks , the 2nd operation should start , after that and the third operation should wait for 6 days . 2ND operation is confirmation only.
3) The third will be for standard process, Only GR
We have to use the same materials . Say 1st process O/P will be 50,000 and second process will be 40,000 and third will be 30,000. We want to account the loss in between the 1st and 3rd operation . 2 nd operation , no need to record .
Requirements - Discrete Manufacturing
u2022     How to set the control key for three operations.
u2022     How to confirm every stage in a single production order.
u2022     How to consider all the operation days in the Production order
u2022     How to report loss in various stages
u2022     How to print all the operation at various stages in the shop floor
Any help will be highly appreciated
Thanks
JJ

Thank you very much
As you use single production order, input the overlapping time in routing in "Min Overlapping time" = 8 weeks (in no. of working days) for the first operation and 6 days for the second operation after selecting "Required Overlapping". ( If you mean it as wait time, you can control the same with the wait time in work center).
    ----I already set it , but it is not considering the days , it took only the base qty and no of hrs calculation
in the prod order ,Our base qty and hrs will set for two hrs only . the remaining 6 weeks is not consider -
With Single Production order, you cannot do goods receipt after the first operation. Since 2nd and 3rd operation are pending, why do you want to do goods receipt at this stage?
----- We want to account the loss , as it will be loosing pounds at various stage -
Carry out confirmation for the sequence of operations in CO11N with the yield qty and use reason for variance as the loss of qty. Using confirmation tables, create z-report to know the actual qty after the last operation. ..
--- Where to set the sequence of operation - i am getting error , No zero sequence ---
I want the system to consider the 7 weeks for this production time. How to do this ?
You can print the operations from pull-down menu in CO02 - order - settings - List control - Op. control ticket

Disable Control Panel for users but NOT for administrators

I'm unsure why Microsoft has not yet published this information. I'm sure that sysadmins everywhere want more granular control of the control panel besides disabling for everyone or enabling for everyone, which is what it seems Microsoft wants me and
you to do, disable CP for everyone, enable it every time I log on as admin and need to use it, then disable again. Ridiculous.
I am a consultant for a large company and our partners like to take as much control as possible. I do too, for that matter. Last week I began researching how to disable the control panel for everyone except admins. I am operating under
the assumption that non-admin accounts do not need access to control panel and it's better if they don't, especially in a production environment where the terminals the users are operating are mission critical.
Finally, I found the answer. I hope this helps you because it took me 3 days to finally find it. It works. I've tested it with admin and non-admin. The great thing is, you can control any GP setting for non-admin users in this manner,
not just the Control Panel. You could disable any and all functionality not necessary for day to day operations for all your users but still maintain access to everything by logging on as an administrator.
The question is answered here
http://www.sevenforums.com/tutorials/101869-local-group-policies-apply-all-users-except-administrators.html

Don:
Sorry for the confusion. Not sure why my link is bad and yours is good. They both appear to be identical.
The issue with executing gpedit.msc is that when you apply a setting, the setting is for all users, even administrators. If I want to disable access to the control panel, I do so for admins as well when simply executing gpedit.msc, which means if I
log in and need access to control panel, I have to enable it in GP, do the work necessary and then disable it again (if I remember) when work is complete. A bit of a drag, especially for busy admins and support techs. On the other hand, following
the instructions in the link disables control panel for all users except administrators. So if I need to work with Control Panel as an admin, I've saved the enable, disable steps and don't have to worry about remembering as well.
I hope that clarifies. Thanks for your feedback.
ok, thanks. I re-read the guide one more time and now I understand the logic - it creates a LocalGPO object, when gpedit.msc is launched in this very special way. It's kind of cool, even if rather niche. (I'm assuming that it only works for LocalGP and not
for Domain GP).
I think your original link had a trailing dot, but it's fine now.
Thanks for clarifying - even after all these years, I am still learning new things :)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

"user password expiration" for every 30 days for the NW2004S systems

Dear all,
We are using NW2004s with BI and DI,EP. We set the parameter "user password expiration" for every 30 days for the NW2004S systems(dual stack).
In the system users SAPJSF,NWDI_CMSADM,J2EE_ADMIN,NWDI_ADM, ADMINITRATOR is also getting change once in every month(30 days),So that we need to change the password and it should get update in the visual admin and config tools. Some time this arising problem. Is there any way to avoid the password expire for this particular user in the system .
Note :Password expire parameter should keep compulsory in the system
So Please guide us to resolve those problem.
Thanks in advance
Regards
Lakshminarayanan M

Hi!
I don't suggest you to change J2EE_ADMIN password. instead you should logon with your user.
Anyway.... please find below a small program to control passwords validity. for some users is very usefull.
REPORT ZS_ALTERA_DATA_PASS                     .
tables:usr02.
select-options : s_users for usr02-bname.
parameter:       p_data like usr02-bcda1 default sy-datum.
update usr02 set bcda1 = p_data
             where bname in s_users.
if sy-subrc eq 0.
MESSAGE 'Password validity changed' type 'S'.
else.
MESSAGE 'ERROR changing password validity' type 'E'.
endif.
cheers

Password works for login but not for the Adobe CC Desktop application

Password works for login but not for the Adobe CC Desktop application

Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
ou can try deleting OPM.DB from steps below and try again.
Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
3) update to the latest version of the Creative Cloud app.
Also we would like few more details:
When has this issue started occurring, was this after installation of any specific adobe product.
On which platform are you seeing this.
Also we would like to know if after above steps this issue occurs ever again in future.
You can refer to http://forums.adobe.com/thread/1239510
Regards,
Rajshree

Asking for purchasing reqistioner no. while making production order

dear all
asking for purchasing reqistioner no. while making production order.how do get rid of this reqisitioner no. option from production order.
regards
manish sharma

Hi,
Chcek the BOM copied to the order or the items that you are entering while creating the order, if item categories are N, purchse requisitions are automatically created and related info is queried from the user. Change item categories to L, stock items if external procurement is not relevant.

Different footer for every package or for every classes

Hi!
1.How can I specify in javadoc that I want a different footer for every package or for every classes?
2.how can I told to javadoc that I have external library used in my project (for providing javadoc comments for for these libraries )?
I used an ant build file for generating javadoc API documentation for my packages.
Thanks,
Florin.

1. Specifying a different footer for every package or class is not available
(unless you modify the standard doclet).
2. To generate documentation for external libraries, you must first have the
source code to the external libraries. Then simply pass in the package names,
using -classpath to point to them.
You can also use -link to link to previously-generated javadoc documentation.
-Doug Kramer
Javadoc team

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Table of Contents page numbers works for PDF but not for other formats

Hi,
I followed exactly was indicated here regarding creation of TOC.
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
(HTML and XLS are understandably not paginated in nature but why not in RTF?)
Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
What am I doing wrong?
Regards,
Jarell
Edited by: Jarell on Jan 11, 2012 8:08 PM

Hi Kavipriya,
What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
You may use any xml because the template does not use any dynamic binding of values.
The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
So the end result should be (PDF result from BI Publisher):
First TOC Item .................. 1
Second TOC Item ............. 2
But for RTF it outputs:
First TOC Item .................. 0
Second TOC Item ............. 0
And after doing Print Preview (once or twice)
First TOC Item .................. Error in Bookmark
Second TOC Item ............. Error in Bookmark
Hope this is detailed enough to illustrate the problem.
Edited by: Jarell on Jan 17, 2012 10:24 PM

GI for every Operations, not for whole production order

Similar Messages

Maybe you are looking for