Give permission to access a report

Hi,
I'm having issues to give access to a report to a user.
Here is what I've done:
- I have created a user toto, and provisioned him as Dynamic viewer for Reporting and Analysis under Shared Services.
- In workspace, I edited permissions of one of my report and added toto, I gave him full control.
When I log in web analysis as toto, he cannot see that report.
If I give him admin rights, he can see everything.
Is dynamic viewer the correct role ?? I think so...
What am I missing then ?
Thanks for your help
Cyril

I love to be corrected when I go wrong.
However, I don't know how Trusted Application role is relevant to Cyril's question. Because- the very description you scribbled for this role highlights that it's got to do with an IR report. And, we're talking about provisioning WA report. Anyways, let me not stretch any further :)
Cyril: You didn't say- if you've externalized Essbase Security to Shared Services. If you've done so, as mentioned in the prev. post, you've to synchronize by- Go to EAS console -> (Navigate to) *<<Analytic Server>>* -> (Right-click on) Security -> (Select last option) Refresh Security from Shared Services
If you've not externalized, check the native security if the intended cube is provisioned for toto, at least Read privilege. Also, what've you configured the WA database connection file with? I mean, with which user?

Similar Messages

Is there a way to give permission to access iPhone 5C when you can't through the display? Display is not showing but iPhone 5C is recognized in iTunes through USB.

So display on phone does not show anymore; however, when I plug it into the USB the phone is recognized by iTunes and triggers the permission pop up to access. The only problem is I can't click "Trust" on the iPhone because I don't have a screen that shows it. I can even reset the phone by holding the power and home button. So basically it's give permission with no screen. I have a replacement phone on the way but unfortunately the back up for this phone was deleted during a PC refresh so no backup and that's why I need access to it. Any suggestions would be very helpful.

There is no way to interact with the phone if the screen is not working.
Did you happen to have iCloud backup enabled? If so, you'll be able to restore from an iCloud backup and get at least some of your data back.
~Lyssa

Job scheduling failed because the user has no permission to access this rep

Hi. I've OBIP 10.1.3.4.1.
When I launch a print with the scheduler I see this error:
oracle.apps.xdo.servlet.scheduler.ProcessingException: Job scheduling failed because the user has no permission to access this report. [REPORT_URL]=[folderreport/report/report.xdo], [USERNAME]=[administrator]
     at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1140)
     at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:295)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:100)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
In this env. I've a LDAP Security Model and all the report and all the users work.

Please check whether you have assigned below responsibility to the user trying to schedule report.
XMLP_SCHEDULER

How to give an user permission to access centain Transformations?

I would like to know how to give an user permission to access centain Transformations in one InfoArea only. I already limited the selection in one InfoArea now. I want users can only Display Transformations for all the InfoObjects under this InfoArea. Does anyone know the detail steps? Thanks!

HI,
are you working under Analysis Auth (BI7) or Reporting Auth (BW 3.X)?
If you work with the new concept you can restrict your authorization by using theinfoobjet: 0TCAIFAREA.
before you Add 0TCAIFAREA as an external hierarchy characteristic to 0INFOPROV also when you restrict your auth by infoprovider you can choose the infoarea hierarchy
hope it help
Regard's

When in Windows 7 (using bootcamp obviously) I am able to see my files in my Mac partition. When I try to access them I am told that I need permission from the administrator. How do I give myself permission to access files between the two partitions?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

Give access for REPORTING application

hi gurus,
we have PLANNING, REPORTING AND RATE applications in our application set
one of my user able to access PLANNING application when he/she interface with excel
now I need to give access for REPORTING application
can anyone help what settings I have to set at SECURITY node
Thanks,
M.Munichandra babu

Hi,
You will have to go to the Member Access Profile that is related to that particular user and give access to the required application.
Karthik AJ

When connecting my external hardrive to my mac, I can't copy files onto it or off of it. It gives me the message 'the operation cant be complete because you dont have permission to access some of the items' It has also been formatted to a mac.

It gives me the message 'the operation cant be complete because you dont have permission to access some of the items'
I tried to even format it to a mac to use it with time machine but it is saying i dont have ownership. I am gettin really frustrated with this, please help

Then use a proper backup application.
Periodically using drag & drop isn't very reliable or complete, and backing-up your entire system is much better than just some selected data. When your internal HD fails (they all do, sooner or later) or something else awful happens, reinstalling everything can be a very large, tedious, and error-prone process. Among other things, 3rd-party apps will have to be reinstalled from the original discs or re-downloaded, and purchase keys or serial numbers re-entered.
You already have Time Machine -- it's built-in to OSX, and very easy to use. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
And/or, you can use a 3rd-party "cloning" application such as SuperDuper or CarbonCopyCloner. See Time Machine vs. Clones and Archives for an overview of the differences.

Secure Delete gives me a "don't have permission to access some of the items

I am cleaning up my drives on a MBP and it came time to delete files from my trash.
Lots went but I ended up with several that blocks the delete process and I get a message "don’t have permission to access some of the items."
Well I did repair my permissions and tried the secure delete again and got the same message.
I do not have the option of doing just a plain delete.
Does anyone have a fix for me?
Thanks
Dunc

do not have the option of doing just a plain delete.
Of course you do (disable secure delete in finder prefs/advanced) - and when you do, a dialog will appear that allows you to enter an admin password. Delete all that fall into this category first...
Secure deletes take forever....why do that - if you're getting rid of the computer/hd, just format and zero it out then, instead.

Access to reports in OIM to NON ADMIN user

HI all,
I need to give access to reports to a NON SYSTEM ADMIN user.
I created a group for him and gave access to the required menu items in the reports.
When I run the report as an admin, I could see the results but when I run it as the other user I don't.
Should I give him other permissions.
Thanks,
M

I'll start from Scratch:
Make User Group and Give menu item like Operational Reports and Historical Reports to that Group.
Click manage group > Select your group and Select Allowed Reports.
Select all those reports which you want to give permission to that user group.
Now depending upon the Reports you can give other access to that group.
Like There is a report group membership. For this you need extra permission to Organization. I mean to say you'll make that group as Administrative Group of that Organization for which you wanna give access.
Member of that group can view all the users but will not be allowed to edit any user profile.
Just to add one more thing:
If you want to modify any existing code no need to modify any JSP, just go to REP Table and select your report. You'll see one column there REP_META_DATA somthing, just modify that column.
Search for Clickable = "true" just make it "false"
COMMIT;
You are done. User will not see any hyperlink there.
Edited by: Rajiv Dewan

Problem in accessing BW Report

Hi All,
I need to show BW Reports in EP 7.0
I have created a system, it's alias and BW iviews and the reports are being shown properly. However, when I have created another user and given the role Reports to the user, then while accessing the reports i get the following exception
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'aliasbwreport_01'. Please check the system object and the alias..
See the details for the exception ID in the log file
Please let me know how should I fix this.
Points assured.
Regards
Nikhil Bansal

Hi Nikhil,
This could be a permission issue with your system that your second
user does not have. Assign proper permissiions to the system to the user,
remember to give end user permission.
Pls consider closing earlier threads if your problem has been solved.
Regards
Vineeth

Apache user dir (13)Permission denied: access to /~simha/ denied

I am getting Access forbidden! when I am trying to connect to http://localhost/~simha/ where simha is my user name
my /var/log/httpd/error_log says
[Thu Jul 08 17:44:30 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /~simha/ denied
I tried a lot and gave up. Can any one help me in this in regard
The following are the permisions of my home dir simha and public_html
drwx--x--x 130 simha users 16384 Jul 8 17:04 simha
drwxr-xr-x 2 simha users 4096 Jul 8 17:02 public_html
The following are my httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks includes
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# phpMyAdmin configuration
Include conf/extra/httpd-phpmyadmin.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
The following are my /etc/httpd/conf/extra/httpd-userdir.conf
# Settings for user home directories
# Required module: mod_userdir
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /home/*/public_html>
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch ExecCGI
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
I also tried adding user to the group http. BUt nothing is working.

Do you have [or more like lack] +x on the user folder?

When a Safari download is interrupted, I get the message "You do not have permission to access the requested resource" when I try to restart it.

I have had this issue with my Macbook Pro ever since I bought it in November. If I start downloading a file with Safari, and the download gets interrupted, I am unable to resume downloading from the point where it was interrupted. Clicking on "resume downloading" button in the downloads list works fine it I do it immediately after the download is interrupted, but if a little time has elapsed (as little as a few minutes) since the interruption it will not let me resume the download, and I get the message in the downloads list "You do not have permission to access the requested resource." I have repaired my permissions...I don't know what else to do. Here's my system configuration:
Macbook Pro Mid-2012 Retina Display
2.3 GHz Intel Core i7
8 GB RAM
System 10.8.2
I just have to editorialize for a moment: My old Macbook Pro and my Mac Pro both worked great with Snow Leopard, but since upgrading the Mac Pro to Mountain Lion and buying the new Macbook I have had all kinds of issues like this. Tech support at Panic software, that I contacted because of issues with some of their software, told me that I was only one of many with Mountain Lion issues, but here we're over half a year since the release of 10.8 and we're only on system 10.8.2. Is anybody at Apple actually trying to fix the issues?
Thanks for anything you can tell me!

If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback

Is there a way for end users to give their manager access to change their Out of Office, without an admin involved?

Our end users need to be able to give their managers access to enable their out of office.
question 1. Can this be done without giving them full access?
question 2. If they need full access, can the end user themselves give this access? (I've tried giving another user "owner" rights, but the user still can't seem to open my calendar from OWA to adjust my out of office)
question 3. Can this be done without an Sys Admin being involved?

You can create a RBAC role for each manager scoped to each of their employees that lets them run the Set-MailboxAutoReplyConfiguration cmdlet on the exchange server. Otherwise they will need full access to the users mailbox which an admin would have
to grant, the end user can not grant this permission. Then they can open the other users mailbox in OWA and set the OOF
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

Upgrade from 6.1.2 to 6.1.3 "you do not have permission to access this resource"

trying to upgrade from 6.1.2 to 6.1.3 on my iPhone 5 but gives me the msgs "you do not have permission to access ths resource"? I don't have any programs running in background and even trying to restore to factory, still won't allow me!!!

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
This is always a good firstvstep to try. After your iPhone restarts try to update again over the air.

Error in Accessing the Report Server URL

Hi All,
I am trying to access the Report Server URL in PowerPivot.But facing below issue .Can any one help me how can I solve the issue
Thanks,
Sid

Hi Visakh,
Yes,The user is holding the permission as "Global User" in sql.Hope you help me in solve this issue
Thanks, Quality Communication Provides Quality Work. http://siddiq-sharepoint2010.blogspot.in/ Siddiqali Mohammad .
Hi siddiqali,
According to the screenshot you posted above, the use account didn't have sufficient permission to open the report, please check the following prerequisites before you perform the action:
You must use a report definition (.rdl) file as a data source. Importing from a report model is not supported.
You must have permission to open the report under your Windows user account, and you must know the address of the report or the report server that hosts it. You can check your permissions by trying to open the report in a Web browser first.
If the report opens, it confirms that you have sufficient permissions and the correct URL.
Reporting Services must be version SQL Server 2008 R2 or SQL Server 2012. Those versions include the data feed export feature that streams report data in the XML data feed format. You can identify the report server by the Export as Data Feed option
that appears in the report toolbar when you open the report in browser:
For detail information, please see:
Import Data from a Reporting Services Report:
http://technet.microsoft.com/en-us/library/gg413491.aspx
Regards,
Elvis Long
TechNet Community Support

Give permission to access a report

Similar Messages

Maybe you are looking for