GL account 131139 does not exist in chart of accounts INT (CIN)

Hi All,
I understand this question has been discussed many times.
But I am not able to solve it.
The error is in MIGO.It was working fine before.I activated CIN by doing all the settings.
When I do MIGO its giving the error.The GL 131139 has been created in chart of accounts INT also.
I have assigned it in CIN settings -Specify G/L Accounts per Excise Transaction- for GRPO.
Do I have to maintain it any where else.Kindly help.
Thank You..

Hi,
The error says G/L 131139 not created under Chart of Account INT
As you said "G/L account 131139 is created for your company code"
1st check in t.code: OBY6, the assignment of Chart of Account INT to your company code.Just cross check Chart of Account 'INT'
Now check Chart of Account INT present is your G/L 131139 in FS00 t.code with your company code in Information(CoCd) TAB
Regards,
Biju K

Similar Messages

G/L account 1212 does not exist in chart of accounts INT

Dear Seniors,
While i do stock upload in MB1C using movement type 561, it is giving an error that
G/L account 1212 does not exist in chart of accounts INT
Message no. M7054
Diagnosis
The G/L account entered is not included in the chart of accounts for your company code.
Procedure
If the system has determined the G/L account, the system setting is faulty. Contact your systems administrator.
If you have entered the G/L account yourself, correct the input. Copied from M8043
I have changed the G/L account in OBYC but still this error is coming. what would be the cause and how to solve it ???
Regards,
Jana

Hi ,
To create the account for chart of account INT use tcode FSP0 .
And if you are trying to replace the account with another account check two entries in OBYC
one is in GBB --- give correct combination of valuation modifier , valuation class , use general modifier BSA and your new account
another is in BSX --give correct combination of valuation modifier , valuation class .
If still you are getting error revert back .
Regards,
Anupam

PO Upload Error "Account does not exist in chart of accounts"

Hi All,
I am trying to upload PO data using LSMW (IDOC "PORDCR101"). For records which have GL account they(IDOC's) are erroring out with message "Account XXXXX does not exist in chart of accounts GBCA".
But the funny part is if I am able to create a PO using same GL manually from ME21N.
Any idea what this issue is?????
Thanks for your time.

Hi,
During Manual PO creation based on the Account Assignment Category field, a default GL account gets populated based on the FI settings.
for example if you enter as K defualt GL will get populated in PO creation.
where as in the case of LSMW it wont consider the GL assignment like how it considers in Manual and through's the error.
Consult the FI consultant also in this regard.
reward if useful
regards,
ANJI

MR11 received error FH004 "Account does not exist in chart of account"

after apply supportpack upgrades from SAPKH46C08 to SAPKH46C53, MR11 list contain line items that were cleared before the upgrade. I've also used FBL5N and status now says open. When I try to clear GR/IR with MR11, it errors out with message FH 004 "Account does not exist in chart of account..." I even tried to search OSS notes, none are found. Anyone have a similar problem but fixed? if so, how was it fixed? thank you.

working with transaction MR11. Problem came from OLD Open Items that were transferred from an old system (not SAP R/3). It only applies to "Invoice Surplus". The Old Open items were cleared before the 4.6C support pack upgrade from SAPKH46C08 to SAPKH46C53. I am not sure (1) why these become "open" again (2) why when using MR11, I received "Account does not exist in chart of accounts..." error message code: FH004. (3) this does not apply to newer open items. Newer items posted fine without errors. Any ideas? thank you.

Account does not exist in chart of accounts COA1

Hi Expert,
While running GR/IR clearing report, i am facing the following issue,
I checked FS00 & FSP0 transaction. G/L account is created for the company code and chart of accounts.
Is there any other issue?
Please suggest.
Regards
Rifaie

hi
please shre athe error code
check entry in OBYC>WRX
here wht account you have given then check in fs00 for the co ocde you have created account properly
regards
kunal

G/L account dose not exists in chart of account

Hi every one
I have problem in MIRO.
My goods receipt is successfully done.But while doing miro system gives error message that
" G/L account dose not exists in chart of account ."
error is not descriptive .... how would i know which G/L account system is asking for . so that i can check in FS00.
if i have to create new G/L account then where to assigne this G/L account. so that it will automatically determine G/L account.
if it need to check with posting keys , account keys then which keys i have to look for???......

Hi
Please check you company code - controlling area - chart of accounts linkage. I hope it is not there.
Please check in FS03 - information in company code tab - whether company code and chart of accounts data exists or not. If not check with FI consultant for above link. Tcodes OX06 and OX19.
Thanks
Edited by: Praveen Raghavendra on Jan 8, 2009 2:16 PM

G/L account 379998 does not exist in company code ****

Hello Everybody!
My very 1st post in this forum.....
I`ve posted this same query in MM forum as I work in MM... I havnt got a solution there! As its FICO related I`m posting it here in this forum. At present we don hav a FICO consultant. So... please help guyz!
I get a error Sayin `G/L account 379998 does not exist in company code ****`.
It happens while I try posting a created PO(purchase order) using T-code MIGO. The error msg no. is M7055.
I`ve also checked FS00 for this G/L acc no.... Its NOT AVAILABLE in my Company Code!
I hav tried copyin thru OBY2... it says `Copying is not possible due to existing entries in the target co.cde`!
Help find a way through this!!!
Thanks!

Hi Jason.
ARe you creating a GR/IR account, then these are the below which you shud
give
Type
Account group - Liab acc (As it is a liab select the radio button B/S)
Control data
Give acc currency, and tick only balances in loc curr
tax category - give the one which u wnat to input or give * which accepts any tax cat
Check the open item and line item checkbox
give sort key as vendor number
field status group - goods/invoice received clearing acc
and tikc the checkbox post automatically only. This account there should not be manual entries
hope this helps
please assign points if helpful
regards,
radhika

G/L account 58013000 does not exist in company code SMSL Hitch

Sap FICO Experts,
 I have a problem in MB1C Transaction. If I entered the Material
 Number the following Error have come.
 G/L account 58013000 does not exist in company code SMSL

 Kindly tell me, What I have to do for further Process.

Hi,,
Create the missing GL account 58013000 in Company code SMSL.You can use T.code FS00/FSP1.
Regards
Aravind

G/L account 891000 does not exist in company code

Dear Gurus,
im facing a error while posting Goods(Subcontracting )
i used Tcode FS01 to create G/L account
since i dont know what are the important data to be entered in creating 891000 G/L account by using Tcode FS01
pls help me
Thanks
Error is.....
G/L account 891000 does not exist in company code
Message no. M7055
Diagnosis
The G/L account has not been created in the company code in which you are working.
Procedure
If the system has determined the G/L account, the system setting is faulty. Contact your systems administrator.
If you have entered the G/L account or the company code yourself, check the account number entered, as well as the company code in which you are working.
G/L acct. CoCode
wrong right Correct the G/L account.
right wrong Correct the company code.
right right The G/L account must be created
for the company code. 

Hi Kamal,
Created account using Tcode FS01
i entered all mandatory fields
then i tried to save it was asking to fill the field Field Status Group in the tab Create/Bank/Interest then i gave G045>>>which is for Goods/invoice received clearing accounts
now the error is solver and im able to post goods...what i've doubt is... im not sure whether i gave correct Field Status Group
pls clarify me........
Thanks

Error - Account group does not exist, check classification assignment

Hi Guys,
I am having an BP replication issue from CRM to R3 when i create BP from Web IC with role UTIL_IC. BP gets replicated to R3 if i create BP from GUI.
Bdoc Error - Account group does not exist, check classification assignment
i have completed all the required configuration as below
Setup of no range for BP and assigned to grouping
PIDE settings in R3
Setup if account identification profile in IS solutions
Thanks,
Nitin

Nitin,
Refer to [this|BP replication error; &[this|Contact Person Replication From CRM to R/3; thread.

Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration

When I try to start Windows installer in Services.msc, it gives me this error Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration. How do I fix this? I am running Windows 7 ultimate.

Hi,
Based on the error code, we can use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration for Windows Installer service.
Besides, the following two threads focus on the similar issue and can be referred to as reference.
Error 1297: "ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297” FTP service in Windows 7 computer
http://social.technet.microsoft.com/Forums/windows/en-US/52329b48-1ba9-4cab-a6b2-efd8db173625/error-1297-errorincompatibleserviceprivilege-1297-ftp-service-in-windows-7-computer?forum=w7itpronetworking
Service fails to start, error 1297 and 7000
http://social.technet.microsoft.com/Forums/windowsserver/en-US/419ba006-4413-4036-8c49-252b08593131/service-fails-to-start-error-1297-and-7000?forum=winserverDS
Hope it helps.
Best regards,
Frank Shen

Company code and Account code does not exist in SKB1 while entering GL Tran

I have created chart of accounts in the co code but getting error msg while posting entry in <Company Code>and<GL Account> transaction that entry does not exist in table SKB1. I have copied COA from existing SAP COA.
I was able to find the solution for the following messages
1. Fiscal Variant not connected to company code
2. Open Posting Period u2013 period 032009 not open (June-3)
3. The number range 01 is missing for year 2009
4. Document Number not defined
5. No amount tolerance range entered for this company
6. Entry Company code no does not exist in SKB! (G/L account company master)
7. Company coode ZR02 is not attached to field status variant

Hello,
There is no such automatic copy function from Chart of Account Segment to Company Code Segment.
You need to write LSMW by recording and upload the GL accounts into company code segment.
Use the following guide for your guidance.
ttp://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Regards,
Ravi

HT201363 i have forgotten the security code and an e-mail is being sent to an e-mail account which does not exist. How do i change the e-mail details

We have forgotten the security code question and each time I request a reset it is being sent to an e-mail addres which does not exist. How can I change the e-mail address to my current e-mail address. We have put money onto an ITunes account which is asking for this security question. This has never happened before. Any assistance would be appreciated. thank you

Hello, covey98.
Thank you for visiting Apple Support Communities.
I would recommend reaching out to us via the link below to assist you with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

DB instance Install stops - account user does not exist

Hi all,
We had a problem with our hostname being too long (15 characters), and did not realize it until we were in the middle of the database instance installation and disp+work.exe could not start. We tries all tips about restarting SAPInst, rebooting server etc. to no avail.
We then changed the hostname on Windows 2003, changed the hostnames in the SAP profiles and changed the service via sapstartsrv.exe. When we started SAPInst again, user account "old hostname"\<sapsid>adm did not exist. We need to change the user account to reflect the new hostname. How can this be done? We have tried the user administration in Windows, but did not find a way.
Please let me know if you have any ideas.
Regards,
Thomas

nevermind...
null

How can I remove a mail account that does not show up in Internet Accounts?

I have a Mail account that I cannot remove because it does not show up in System Preferences > Internet Accounts. How can I remove this account permanently?
Here is the account in Mail:
Here is what I get when I try to remove it:
Here is what shows up when I click on Internet Accounts:

Thanks, it was linked in iPhoto. After removing it from iPhoto I still got the same message when trying to delete the account from Mail. After rebooting, I was able to remove the account from Mail.

GL account 131139 does not exist in chart of accounts INT (CIN)

Similar Messages

Maybe you are looking for