GL master data - display translation in GL account list report

Hello all. I would like to produce a report that shows the Spanish translations we've assigned to GL accounts in the Translation section of master data. However, I can't see where I can define the language "ES" in any of the standard reports criteria. Any suggestions? Or do I have to log into SAP 4.7 with the language "ES" in order to see those translations?
Thanks!

Hi,
Try F.01.
Enter the chart of accounts, the comapny code. Select the FSV (use BABE, its like a trial) and input the language as ES. It should show you the text in Spanish.
If you just want to view the GL account and the Spanish description, you can view the table SKAT in transaction SE11 / SE16 and you will be able to see the text in the language of choice.
Cheers.

Similar Messages

Error F5507 on MIRO. "The general master data of the G/L account 161000 is not maintained in the chart of accounts 1000"

I was doing a MIRO w.r.t PO. I was getting the following error - "The general master data of the G/L account 161000 is not maintained in the chart of accounts 1000." I later went ahead and created the GL Account in the COA. now the error is recitified. But, I would like to know what happens in the background.
Could someone explain me this? How is the G/L account determined?

Hi,
At the time of MIRO system posts below Accounting Entry:
GR\IR Clearing Account Dr--> This will be picked from t-code OBYC- key WRX
Vendor Account Cr--this will be picked from vendor master data
If there are any tax or TDS involved then system post to those accounts as well.
I guess 161000 is your recon account? Because if it is GR\IR then you would have got error at the tim e of MIGO ( if you have already done that)
Hope this is clear to you.
Br,Vivek

How to load this value into the master data display attribute

Hi ,
Please share me the knowldege how to load this kind of data into master data display attribtes ..
Raj + Ravi Ltd (PCG: 13592)
While loading this data ,i got the error message stating that '+' should not be part of the attributes and () should not be part of the attribute ..but i need all the information as it is available in the example data .
Do i need to maintain RSKC Settings else some other things required ..
Please guide me ..
Regards,
Raj

HI,
Maintain these symbols in RSKC and try to reload the data....

Equipment Master Data Display

Dear PM Experts,
I m facing a problem regarding equipments Master data display.
When I used t-code ih01 after getting the list of technical object when I click any of the technical object, in equipment master data structure tab I can see the functional location and superior equipment
But when I m seeing the same equipment No. through IE03 I m not able to see the functional location or superior equipment in structure tab.
One more difficulty hw to see the changes history effectively because when I see the changes history Extra---- Display Changes.there are no. of entry at a single time for example at 15:10:05 ( 15 hrs 10 min. & 05 sec ) there are ten changes in old value H & New value D . What it means please explain.
RC

Dear Pete,
I got the answer
1.In Ih01 Valid date i was taking in past so it was showing the past history of equipment.
2.whenever I m dismantling any functional location it is showing multiple changes at a single time.
RC
Edited by: Raju chauhan on Oct 12, 2008 3:31 PM

Block GL account Listing / Report T C plse

Dear Experts
can you please tell transaction code for Block GL account Listing / Report.
Thanks
B

Hi Bhaskar,
Please check mentioned transaction code S_ALR_87012328 & select blocked field in dynamic selections and execute .You can get Blocked GL
Rgds
ManiSuma

UPLOAD MASTER DATA FROM SAP GL TO ACCOUNT DIMENSION

hi
how can i upload master data (chart of account) from BW 0GL account info object to BPC Account Dimension ?
how can i upload the hierarchy, there is no hierarchy in ECC for the chart of account

SAP offers free content + documentation in the form of rapid-deployment solutions (RDS).
In the Extended Financial Planning Rapid-deployment solution, there is a module called G/L Financial Planning which includes the full load of SAP-based account dimension from SAP ERP to BPC via BW. This content introduces BPC-based Package Links as a best practice way to load master data (including the account hierarchy and transaction data). You can download the content and documentation from the highlighted page above or HERE.
SAP also offers free training on the EPM rapid-deployment solutions in the EPM RDS Academy 2015 on SAP JAM. If the link to the Academy does not work, please register HERE and SAP will invite you.

GL Account Master Data for all the inventory Accounts

Hi,
What is common & unique feature in the GL Master data of all the Inventory related accounts? Is it "POST AUTOMATICALLY" or some thing else
Thanks,
Lavanya

In addition to the 'post automatically' option, please also ensure the field status group selected is relating to 'material accounts'.

HR Master data display control.

Hi All,
I have set up an HR admin with access such that he should not be able to view pay info of some users. However, when i tested it the user is able to partly view the pay info of a user A. However, he cannot view pay info of user B. The confusion is that both the user A & B belong to same personnel area, employee group, sub group etc..they are under same pay admin..I am confused why user is able to partly view pay info of A when he cannot view pay info of user B. Although, when he tries to view infotype 0008 for user A, he gets a message "few records skipped" for which below are the SU53 values. But still 0008 is visible...
Authorization level                                  R
Infotype                                                 0001
Payroll Administrator                              ' '
Administrator for HR Master Data            015
Administrator for Time Recording             ' '
Administrator Group                               XYZ
Subtype                                                ' '
I checked the configuration of P_ORGIN & P_ORGXX...totally confused..
Any help would be appreciated..

Hi there,
do you use structural authorisations in your organisation? two users with identical access rights in SU01, but it is possible for them that if they are identical, but have different structural authorisation assignments they will see different information.
An authorisation trace will run successfully and not necessarily show any failures, but if the structural authorisation check fails, you will see a message that says something like "unable to display 123 records due to insufficient authorizations". That's typical of structural auths.
The ways to check it: go to transaction OOSB - see if both your user IDs are in the table. If they are, you can see the HR objects that are accessible to that user by clicking on the "Information" button (blue I) next to their name.
If a user has OOSB with an expired entry, then they won't be able to see any HR info.
Depending on what active struct auth they have assigned, and/or where they sit, they will have different values assigned them.
If a user has no entry in OOSB they will see everything, same as if a user has an 'all' entry in OOSB.
I'm unaware if there is a trace that will actively show you structural authorisation checks.
Well, maybe this will help you out.
Good luck,
Cheers,
Di

Unused Master Data Display and Deletation

Hi all,
To delete any unused master data we have to goto infoobject and execute delete master data.
Is there any other way to display or delete master data records which is not used anywhere in BW system?
Because when we are trying to delete master data it is taking long time and lost of resource. Then after also due to other processes are waiting in the system we have to kill that job after 20 to 24 hours.
Can anybody please guide me through this?
Regards,
Rohan Shah

Hi Rohan,
You can delete the data in the tables by the way below.(However this is not the ideal approach)
1. Go to SE14 -> select 'Tables' from Dictionary objects & give table name (e.g. /BI0/SCOMP_CODE) -> Click Edit -> choose the option "Activate and adjust Database" and select "Delete Data".
On execution, it will delete the data.
Hope it helps.
Rgds,
VA

Master data(0vtype) values are not showing in reports.

Hi Gurus,
I have an info object '0VALTYPE' with 'TEXT'. I already loaded the data in
for this object. but in reporting level i am getting the values # and 20(actual)
even though it has so many vales(ex: 10(plan)etc). but all the values are not populating in the query.how to get all the values in reporting level.
Thanks in advance.
Thanks
Raju.k

Hi Raju,
You have already confirmed, but still please go to infoobject 0VTYPE again and check the master data to see all values exits there.
If yes and still in reporting you can not see those, try doing the following:
1) Right click on 0VTYPE and click on "Activate Master Data", and/or
2) Go to Menu --> select Attribute change run --> select 0VTYE and execute the changes.
Regards
Pankaj

Master data infoobject values not presneting in the report

I have one infobject.that contains 50 values.
If i open the query desinger and in dimension if i open my infobject i can see only 30 records only,,,
how can i get 50 records?
master data is activated.......if i am trying to activate it shows as alearady masterdata is activated
Regards

Hi,
Activation seems to be the issue:
use the below program
RSDDS_AGGREGATES_MAINTAIN.
Simply give the Infoobject name which you want to activate and execute.
Reward if useful
Manish

Error while loading master data (Displaying warnings like missing messags)?

Hi,
loading is successful but request is not in green.
it is appearing in yellow colur.
The warnings message(yellow in colour) is:
"Data package 1: arrived in BW; processing: Data packet not yet processed."
Error messages like:
1.Extraction (messages): Errors Occured.
2.Transfer (IDocs & TRFC): Missing messages or warnings.
Data package 1: arrived in BW; processing: Data packet not yet processed.
3.Processing(data packet): Warning received.
Data package 1: Missing messages.
Please suggest the solution what needs to be done.
After reloading also the same errors are getting displayed.

Hi
You can go to the source system . In SM58 check for the tRFC's. Execute the tRFC's manually and see if this helps you to proceed. You need to check for tRFC's for your BWUSER who has executed the load. Also check in SM50 on the BW system to see if you have enough BGD processes available to run the loads. These should be ok for you to start
Regards
Vin

Equipment master data display of "ship to party"

Hi experts!
I got following problem:
Delivering an equipment to a partner only the "sold-to-partner" number is filled by using the "BAPI_EQUI_CHANGE". The "ship-to-party" field remains grey. Therefore also the asset is updated the the "ship-to-party"-partner.
Changing the equipment manually the "ship-to-party" field is then filled automatically.
I already did the customizing, described in thread Partner Data in Equipment Master and thread Synchronisation between asset and equipment
Many thanks and best regards,
Nikolaus
Edited by: Nikolaus Aigner on Aug 12, 2009 2:46 PM

Dear Pete,
I got the answer
1.In Ih01 Valid date i was taking in past so it was showing the past history of equipment.
2.whenever I m dismantling any functional location it is showing multiple changes at a single time.
RC
Edited by: Raju chauhan on Oct 12, 2008 3:31 PM

GL account master data creation control based on Account group

While creating GL account in FS00 we need to control to select P&L account or Balance sheet account. At present after selecting P&L accunt group it is allowing to check Balance sheet account. If we select account group belongs to Balance sheet but it is allowing to check P&L. How to control to select P&L or Balance based on account group.
For example: If we select account group beongs to P&L it should allow to check P&L statement account.
If we select account group belongs to BS it should allow to check Balance sheet account

I don't there is any control for this at 'Account Group' level, please use userexit EXIT_SAPMF02H_001 for this.
Regards,
Ganesh

Line item Display for G/L Account Regarding report RFSEPA01

In transactions reports: FBL3N and FS10N I have differents accounts balances display.
I already had tried to execute the RFSEPA01 but it shows RUNTIME ERROR ..Somebody knows a program to equal these .
please treat this as a urgent..

hi can u give me solution for this iam facing same problem
thanks
raju

GL master data - display translation in GL account list report

Similar Messages

Maybe you are looking for