GL not appearing in PCA report S_ALR_87013336

Dear Experts,
For acct XXXX, there's balance & we can view line item thru FI (tcode: FBL4N). We can see PC been assigned to those line items, but the GL XXXX not reflecting in PCA report (tcode S_ALR_87013336).
GL XXXX is a Balance Sheet GL (not a Reconciliation GL). This GL is not added to 3KEH. There are other GLs too, which are not added to 3KEH, but still those are appearing in PCA report S_ALR)87013336.
If you can please advice about this discrepancy.
Regards,
Hussein.
Edited by: Hussein  Merchant on Apr 18, 2011 5:05 PM

After adding 'trip type expenses in the layout' in the layout, save the layout as a variant and give it a name.
Next time when you run the report, put that variant and then run
Values will come

Similar Messages

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • WHT amount not appearing in FBL1N report for Document type RE

    Dear Friends,
    While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
    Regards,
    Ramkumar

    Hi,
    FBL1N is having the classic withholding tax field hence please don't refer the those fields.
    please don't refer those fields.
    Please review attached note 363309 for detailed explanation.
    BSEG-QBSHB is designed to fill for the classic withholding tax. And
    extended withholding tax information is stored exclusive in table
    WITH_ITEM.
    You can check in table BSEG for the fields and will find that system
    do NOT update field BSEG-QBSHB.
    In your line layout,you define a field BSEG-QBSHB. But actully the field
    of vendor/customer line item is filled with zero from FI. Thus,it shows
    zero in line item display.
    And as note 363309 says,
    "Remove the field which contains the withholding tax information
    from your display variant.
    If you want to display the withholding tax information, double-click on
    the document number and subsequently choose 'Withholding tax'."
    Regards
    Madhu M
    Edited by: M Madhu on Jan 18, 2012 9:13 AM

  • Order plan cost not appearing in PS report.

    Dear PS friends,
    I have an issue in order plan cost updation ( budget report ).
    Used the prescribed WBS in maintenance order ( additional data ), but its not appearing in planned cost of CJ31 screen.
    Checked the following
    a)  WBS is account assignment element.
    b) Network type order appended indicator in OPSV.
    c) Setting in network type parameters for " determine plan  
        cost".
    d) WBS and order - both are showing plan cost when booked separately, but not integrated.
    Can anybody help me to resolve this ! 
    Thanks in advance
    --  Sri  --
    Edited by: Srinivasan Madaswamy on May 18, 2008 2:15 PM

    Hi,
    In case of the maintenance order (Order Category:30)
    Please check the follwoing in Tcode OPSV:
    1. type is maintained default i.e ++++ (this will consider all the order types mantioned for maintenance order.
    2. Please selelct the appropriate controlling area.
    3. Appended plan indicator has to be checked mark,
    4. Assigned funds in the plan indicator has to be checked mark,
    5. In Tcode IW32: In the additional data Tab assign the WBS Element. Save the maintenance order.
    Hope its useful.
    Reward point if useful. Revert abck if any other issue.
    Thanks..

  • Transport of Query successful, but changes not appeared in the report

    Hi All,
    I have 2 Queries(Normal and Total stock reports on the same InfoProvider) in Prd.
    For that User asked me to add one characteristic to Free characteristics.
    I added one characteristic in Free Characteristics to both Queries in Dev and i collected the Transport requests for both the queries in RSA1->TRANSPORT CONNECTIONS and gave it to basis guy, he transported successfully to PRD and for both the reports the changes reflected in the
    query designer, while executed the Normal stock report the characteristic added in free characteristics appeared and while drill down the data is coming, but for the Total stock report the changes appeared in Query designer but on executing the report even  the characteristic added to Freecharacteristics is not appearing in Navigation Pane.
    Also with the same technical name of total stock report there are 2 reports appearing in query designer. what to do now.
    Help me here asap..
    Thanks,
    Chaitu.
    Edited by: chaithu218 on Jun 21, 2011 10:37 AM
    Edited by: chaithu218 on Jun 21, 2011 10:40 AM

    Hi Chaithu,
    As you mentioned that you can see 2 versions by the same technical name in designer for total stock report, it is highly probable that the query you are changing and the query you are executing are different.
    2 versions of a query can exist with the same technical name as the system identifies the queries by their UIDs, which would be different for both these versions of queries.Following are the things you need to check:
    1) In development system too, do you have 2 versions?
    2) In production system, check the UID for both verions of the query
    3) In Dev system, make sure you modify the query with UID which is being executed, if it is available there. Else, you need to replace the query in prod with the one you have in Dev system.
    2 versions by same technical name can exist if:
    1) Someone created a query directly in Prod, and transported a query by same technical name from Dev system
    2) or due to system refresh, copy, etc.
    Hope it helps.
    Thanks,
    Abhishek.

  • L.C value not appearing in MB51 report

    Dear gurus,
    The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

    Dear Jay,
    It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
    In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated  in the below path
    SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
    Goods receipt made after this change will be triggered the finance document.
    R,
    amala

  • Field label not appearing in OIM Report Page

    Hi,
    Though this sounds like a silly problem, but I am not able to figure out what could be the problem.
    I have created a new report in OIM and it is working perfectly fine as per the stored procedure. The only problem is that one of the label name is not appearing correctly in the report page display. It consists of the following fields:
    1. First Name
    2. Last Name
    3. User iD
    4. Custom field of the target application resource -say- abc.
    In the xlWebAdmin.properties file, I added a new property for the custom field -
    report.CustomReport.label.CustomField=abc
    The same value has been written in the XML metadata of the report.
    However, in the report page in OIM the label appears as - ???en_US.report.CustomReport.label.CustomField???
    Please advice.
    Regards.

    Actually, we are getting a few errors while running the script and hence I was looking for any alternate, if possible.
    java.io.IOException: java.io.IOException: /app/oracle/product/APP/10.1.3/j2ee/home/jsp/bin/ojspc: not found
    at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
    at java.lang.ProcessImpl.start(ProcessImpl.java:65)
    at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
    at java.lang.Runtime.exec(Runtime.java:591)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    It is unable to locate "ojspc" path. I am not sure as to where this path is referenced. I have to change it there, so that it refers to thecorrect one.
    Regards.

  • COPA - Planned Material Cost not appearing in KE30 report

    Hi all
      In COPA planning, I manually planned the Material cost (Material External Price) along with the Sales Quantity and Revenue for two company codes (one plant in each co code). But in KE30 report, I could see the material cost (MEP) values only for one company codeplant. What could be the issue?
      I even tried valuation in KEPM. Valuation step is calculating and populating the material cost in KEPM, but the values are not flowing to KE30 reports. And this happens to only one of the two company codes.
    Thanks
    Vamsi

    Hi Vamsi
    Please check table CE2XXXX, where XXXX = Op Concern.... Here, can you see the plan line items??
    If yes, then the issue is with your report definition in KE30... May be you are restricting values display in KE30 report by virtue of your selection parameters
    br, Ajay M

  • Fields in Stored Procedure does not appear in Crystal reports 2008.

    hi,
    I am now using crystal reports 2008 evaluation copy for 30 days. I am trying to create a stored procedure with parameter, here is my sample Stored Procedure code;
    DELIMITER $$
    DROP PROCEDURE IF EXISTS `puerto`.`SP_FindEmployees`$$
    CREATE DEFINER=`root`@`localhost` PROCEDURE `SP_FindEmployees`(SIDNo VARCHAR(10))
    BEGIN
         SELECT * FROM employees WHERE IDNo=SIDNo;
        END$$
    DELIMITER ;
    when i try to call the procedure in sqlyog here is my sample code;
    CALL sp_findemployees('0000000001')
    it is successfull, but when i try to  connect it with crystal reports 2008 I got no fields in my stored procedure andi got this error message ;
    "Database Connector: 'HY00:[MySQL][ODBC 3.51 Driver][mysqld-5.1.33-community]incorect number of arguments for procedure puerto.sp_findemployees; expected 1, got 0 [Database vendor code: 1318]"
    CR2008 was not asking a parameter values.
    But when I try using stored procedure that i've made in MSSQL, CR2008 asking parameters and succefully created the reports needed.
    My Objective is to make a stored procedure  in MySQL by using select statement and filter it with parameter(s) that I will pass and CR2008 will use this stored procedure.
    i also try the view with this code below and it was successfull in CR2008.
    DELIMITER $$
    DROP VIEW IF EXISTS `puerto`.`ep_employees`$$
    CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `ep_employees` AS (SELECT `employees`.`IDNo` AS `IDNo`,`employees`.`FullName` AS `FullName` FROM `employees`)$$
    DELIMITER ;

    hi,
    Crystal Reports 2008 and MySQL 5 , ODBC driver 3.5 and ODBC driver 5.1.
    I use ODBC connector 3.5 because I got errors in ODBC drivers in 5.1.
    Do you have step by step procedure for creating add command dialog box?
    I try creating the add command dialog box
    here's my sample sql statement i don't know if its correct because no data appearing in my crystal report
    Select * from employees where idno=@IDNo
    in Command Parameter Dialog Box
    Parameter Name = @IDNo
    Prompting Text = @IDNo
    Value Type = String
    DefaultValue = 0
    thanks!

  • Condition type not appearing in Pricing report

    Hello all,
    There are 2 condition types
    ZR00 - condclass B, calc type C, item condition, with acc seq Sales Area/Material and
    ZQA2 - condclass A, calc type C, item condition, with acc seq Sales Area/Customer/Material.
    I have maintained condition records for both & created a pricing report with field name Condition type for which position is Page Header of Pricing report.
    However when i fire this report condtype ZR00 appears but ZQA2 does not. Please advise.
    Thanks
    -Dinesh

    Hi Dinesh
    In the condition table , maintain the key combination of sales area/Customer grp /customer/material and then generate the report. Then you may  get the output  . But make sure you have maintained the customer group in CMR also.
    But it is better to reduce the key combination you have maintained , because there are many feilds which are involved, may be that could be the reason you were not getting output.
    Regards
    Srinath

  • Chart not appearing in Interactive report

    Hi,
    I have a nice interactive report. When I try to display a chart using the tools of the report, nothing appears. There is only a message, a kind of progression message saying "loading xml..... 100%", and then nothing appears.
    I am using Application Express 3.1.0.00.32.
    Thank you for your answers.
    Christian

    Hi Dimitri,
    Firs of all thank you for your patience. I do not oblige you to answer or whatever. it was kind of showing you the error.
    There are date columns but they were not selected for the chart.
    SELECT
         a."FICHE_ID" "N°",
         b."AGENT_ID" "AGENT_ID",
         b."NOM" || ' ' || b."PRENOM" "Agent",
         a."EQUIPE_ID" "EQUIPE_ID",
         c."LIBELLE" "Equipe",
         a."DATE_ACTIVITE" "Journée",
         a."TOTAL_HEURES",
         a."TOTAL_HEURES_EXCEPTIONNELLES" "H. excep.",
         a."FICHE_CREE_PAR" "Fiche créée par",
            a."DATE_CREATION" "Le"
    FROM
         "OBSERVATOIRE"."FICHE" a,
         "OBSERVATOIRE"."AGENT" b,
         "OBSERVATOIRE"."EQUIPE" c
    WHERE
         a.AGENT_ID = b.AGENT_ID
    AND     a.EQUIPE_ID= c.EQUIPE_ID
    AND     (a.total_heures IS NOT NULL
             OR a.total_heures_exceptionnelles IS NOT NULL)
    group   by a."FICHE_ID" ,  b."AGENT_ID" ,
            b."NOM" || ' ' || b."PRENOM" ,
               a."EQUIPE_ID" ,
               c."LIBELLE" ,
               a."DATE_ACTIVITE" ,
         a."DATE_CREATION" ,
         a."FICHE_CREE_PAR",
         a."TOTAL_HEURES",
         a."TOTAL_HEURES_EXCEPTIONNELLES"
    ORDER BY
         a."DATE_CREATION" DESCThank you
    PS if you want we stay here, no problem I you do not want to go further with this thread.

  • Commitment value for service PR not appearing in 12ksta report

    We have two types of service PR-- COS & CCV. Although the PR is not deleted, its Deletion indicator in the COOI table in the COS PR is set automatically while same Deletion indicator is not set in the EBAN table.  As a result ZERO Value is appearing in the WGHBTR, WTGBTR,WKGBTR,WOGBTR of the COOI table and zero value in the 12KSTA report. Why this difference of the Deletion indicator in the two tables for the same PR ?
    With the similar configuration, there is no problem with the CCV PR .
    How do I remove the Deletion indicator from the COOI table for the COS PR ?
    Please help.
    SM Hussain

    Dear Saurav
    We checked thru OKKP,CUNI,RKACOR04,RAKANBU01, CJEN. CJBN and including your suggested notes like 152571,47992, 671563, 167350 etc with no results.
    We are wondering how Deletion indicator is set in COOI table when the PR is not actually deleted, if you can help us to throw some light on this aspect.
    With regards
    SM Hussain

  • Stock Take Postings do not appear in XL Reporter since upgrade to 8.8

    If you go to report composer or designer and bring back all journal entries, you will see that no journal entries created by the stock take process are showing in the results.
    Similarly if you give it the specified transaction number of the stock take journal entry or even the gl account, it can not return journal entries results for this.
    The above appears to apply to 8.8 and 8.81 pl3.  If you run the same test in 2007, it works fine.  Has anyone experienced this or know of a resolution to this.

    Hi Thanks Gordon for your reply.
    Does this mean then that XL reporter can no longer be used for reporting such as the profit and loss report.  The stock take transactions fall under cost of sales and therefore any attempt to run one of the xl reports for this are completely inaccurate.  Is there anyway to get around this?
    Sam

  • NO GR BAsed PO not appearing in Comittment report

    Dear Experts,
    We have business process of 2 Way match. In this PO is created with GR Required as Unchecked that means no GR for this PO is expected  as well as Delivery Completion Indicator is Flagged.
    But for this PO Invoice is expected and hence we expect to have such POs in Comittement Reports.
    But I could not able to get such POs in the Satandard SAP Comittement Report, is there any report or how we get get such POs list for which Invoice are pending with value based.
    Thanks.

    Hi Ian,
    If you have troubles with Reports not displaying fonts correctly, then I would advice you to open a service request with Oracle Support. This could be quite complicated. However, you could also try to ask the question in the Reports Forum.
    Regards,
    Martin

  • Image not appearing in  XML report in peoplesoft

    Hi,
    I am trying to have the photo of the employee in the report.
    Req is that...i need to have the photo of the employee basing on the employee id. I have inserted a dummy photo in the template and had given the webpath to it.
    My problem is that how can i change the employee id dynamically in the web address.
    Thanks in advance,
    Vaddadi

    I ran into this problem as well, and there is a work around if you do not want to apply the patch. Put the image in your <oracle_home>/apache/apache/htdocs directory. Then in your report in the parameter section, create a text box. Put this in the text box:
    <img src="http://<your_servername>.<your_domain>:<your_port>/<your_gif>">
    Go into the parameters of the text box you just created(hit F4) and choose YES for Contains HTML. Then when you run the paramter form on your web server the image will be displayed.
    Martin

Maybe you are looking for