Glass issue

No se si es 1 problema en si, o que el movil es así, cuando lo tengo bloqueado (pantalla en negro) y hay luz en la habitación al mover la pantalla se le ve como unas rayas y puntos blancos? creo que simplemente es el panel, pero no sé si es normal, Gracias.
Solved!
Go to Solution.

@alejandruchi - No problem, as outlined above by Zann.H this is quite normal, you are just seeing the digitiser. It is only visible under very strong direct light at certain angels but is quite normal.
What are your thoughts about this forum? Let us know by doing this short survey.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • HELP! Illustrator CC Effect Stained glass issue

    Hello. I'm relatively new to Illustrator. I'm designing a pair of shorts and have come across a problem. I'm using the stained glass effect to give the shorts a reptile look over a gradient green to black 90 degrees. When I select the stained glass effect, the edges are white and black while the rest of the shorts are the green to black gradient. It's very frustrating why the color gradient does not run to the bleed lines. Can someone please help me? I have created this look in the past using Photoshop and had a bunch of uniforms made up for my customer. I need to make more, but my new supplier cannot use the photoshop file as he needs an editable file in vector. I'm trying to upload the image, but it's not working. The file is 3.6mb. Please help if you can, this is urgent.
    Thank you!
    Anthony

    I don't know anything about Illustrator but I did check over there and see your question so someone else may read it and respond.
    If you want to include a screenshot of what you're talking about, it might be easier for people to understand.   To embed a picture into a forum message, use the little camera icon at the top of where you type in text:
    I usually have better luck with positioning the picture if I don't use Internet Explorer 11, and usually use Chrome.

  • Front Glass Issue

    How to prevent lints & dust from getting behind the display?

    Reading through numerous posts in Apple Discussions Support, I found this to be a very common issue. I never really payed any attention to it until one day while I was cleaning my screen with a micro-fiber cloth, I noticed a lint that was stuck behind the display and no matter how much I wipe, it won't go off. Currently, there are more lints and the situation seems to deteriorate with time

  • IPhone 5 the screen glass popped. Refused to be repaired for free in warranty.

    Hello everyone,
    I have iPhone 5 with 3 months warranty left. It is purchased from local mobile operator in Bulgaria - Mtel. 3 weeks ago I saw a screen glass issue. From one side, the glass Is little popped and when I push in that area the touch screen floating. The glass is popped about 2 millimeters. The iPhone works properly, the touch screen to, display is in perfect condition. I gave the iPhone for warranty service, and after a week they avoided the warranty, because “the phone has signs of impact”.
    Actually the phone has dropped 2 times for 1.7 years and that was happened couple of months after buying it. The screen problem appear 1.5 years later.If the screen problem is because the battery is swollen, can they(service) again refuse to repair my iphone with warranty?
    PS: I am sorry for my bad English, this is my first time to communicate in English spoken forum.

    Thank you for your answers. My serial number is not eligible for “iPhone 5 battery replacement program ” but is eligible for “iPhone 5 Sleep/Wake button replacement program”. I don’t know how much this is matters for my case.  My screen glass is in good condition without scratches.
    I found in web for similar issues and exactly the same with pictures, but here the phone is one day old and is 5s.
    And like here before I saw the display is popped I recognize same “there is a click or pop coming from under the screen when I am using it.”
         I will search for second opinion in local apple retail store. Can be a problem this: in service of local wireless carrier partner Mtel will put on the back of the warranty card  “warranty void” (or something like this )?

  • Imac desktop icon question

    ok 1st off let me say good job to apple i finally got my wife's 27in i7 and was worried about the lower left glass cracked issue. so the box gets here and all i can hear is something rolling around in the box .. im like awwww shhhhhh .... but found out it was only the bag of beads that they put in box had torn open .... but all is well installed extra ram ...
    but
    either ive gotten a brain freeze but the icon for the HD is not on the desktop - can anyone tell me how to get it back on there?
    ive never seen a mac that had no HD icons on the desktop .. is this something new they are doing now .. but any help would be appreciated
    ps.
    i wonder if by ordering the office mac may have helped avoid the glass issue since they would of had to open box to install.

    Hi Ron
    Open Finder or click anywhere on the Desktop, now then go up on the menu bar and open *Finder > Finder Preferences* and check to be sure all the boxes for *Show these items on the desktop:* are checked. Then before you leave the *Finder Preferences* jump over to the Sidebar tab and make sure that the desired boxes are checked there as well.
    Dennis

  • Iphone 3g screen or LCD broken?

    Hey guys, the wife dropped her 3g last night and there is a crack running from the left to the right. The display behind it still looks perfect, but the unlock finger swipe isn't working, and the power down swipe will only work until your finger hits the crack (runs left to right, about an inch down, and moves to the top right). I'm 99% sure this is just a glass issue since the picture is fine, but can someone else verify this. I've ordered just the glass, then got to thinking about the LCD.

    Ok, I kind of figured that but was hoping someone who has seen true LCD damage would know. I'm assuming that if the LCD were damaged there would be picture bleeding or missing pictures. I am also assuming that the glass is the part that has the touch/swipe sensors, so if that is the function not working then it is a glass issue.
    I just hate assuming

  • Chance of repair?

    So this is an on going problem with my iphone.. i plug it in and it says the device isnt supported for charging. Anyway no matter what i try it always says it so i cant charge it (iv gotten lucky in the past but its no longer working at all)..
    so iv filed a repair order thingo and im gonna send it for repairs, the only problem is my phone has a crack in the glass and im just wondering if this will effect me getting a repair under the warranty? i under stand its damaged but this could in no way effect it charging so i dont see why this should effect it.

    Fact is, it doesn't matter what anyone here tells you regarding whether your phone will or won't be covered by warranty. No one here works for Apple or is in a position to make that determination. I understand you're looking for re-assurance, but the re-assurance you get is immaterial. In my experience, Apple has always tended to favor the user when it comes to warranty issues, unless there are overt signs of user abuse. Broken glass is not covered by warranty. Your post does not indicate if the front or rear panel is cracked, or even if this is an iPhone 4. Apple will most likely not just address the charging issue without also addressing the glass issue. If I were in your shoes, I'd make the two hour trip to an Apple store...you always stand a better chance of resolving issues, in your favor, in a face-to-face meeting. Good luck.

  • Strange screen streaks / smudges: disappear when I wipe, but then come back

    My 13" macbook pro display has a strange glass issue. There are horizontal streaks across the screen that look like somebody wiped dirty water across the screen and let it dry. They can only be seen when there is light directly on the screen, or overhead light. If there is no direct light, it isn't visible from any angle.
    The strange thing is that when I use a micro cloth to try to wipe them away, it looks like they disappear but then, within a few minutes, the streaks will reappear. I thought that it may be something on the other side of the glass, but then why would it look like they disappear? As I said, when I look at the screen from below or above under indirect light, the surface look 100% perfect -- it's just when there is direct light or overhead light that the ugliness is visible.
    Any thoughts on what this could be? I know I need to take it in, but would like to understand what this is...
    Thanks!

    I have this issue as well with my MacBook Pro. I'm going to do more testing but I had dirty water looking blotches across the screen. I wiped them off and it looked perfect with the cloth. This morning they're back. You can only see it when the light is right and the screen is dark. I was thinking that because my office is about 68 degrees that the laptop heats up and when I shut the lid it cools down and condensates. Just a thought its not humid in the room and I don't have any windows.

  • HELP! Illustrator CC Stained Glass effect issue

    Hello. I'm relatively new to Illustrator. I'm designing a pair of shorts and have come across a problem. I'm using the stained glass effect to give the shorts a reptile look over a gradient green to black 90 degrees. When I select the stained glass effect, the edges are white and black while the rest of the shorts are the green to black gradient. It's very frustrating why the color gradient does not run to the bleed lines. Can someone please help me? I have created this look in the past using Photoshop and had a bunch of uniforms made up for my customer. I need to make more, but my new supplier cannot use the photoshop file as he needs an editable file in vector. I'm trying to upload the image, but it's not working. The file is 3.6mb. Please help if you can, this is urgent.
    Thank you!
    Anthony

    Stained Glass is a pixel effect, so what's the point of using AI? And even if it wasn't, if there was gradation of some sort your supplier would have to use a printing process based on creating discrete halftones to capture all tones, not sharp contours. Really doesn't make much sense. Either way, make the object with the effect larger and constrain it with a clipping mask. The same would apply for importing a pre-made texture from PS. What you see are simply the edges of the object as AI processes them with all their appearance attributes and then you get all sorts of issues with overprint and such stuff, which is one more reason why using raster effects in AI not necessarily makes sense....
    Mylenium

  • Quality issues? Dirt behind the glass

    Hi there,
    I have just returned yet another 27" Cinema Display to Amazon because of quality control issues at Apple it seems:
    There was clearly visible *dirt behind the glass screen* (i. e. sitting directly on the LCD panel itself) - this seems to be limited to the right hand side of the display. This was the second display with gunk (some weird smear) in the top right hand corner, and dust in the lower right hand corner.
    Anybody else experiencing problems with the build quality of the 27" displays?
    Regards from Berlin,
    jan

    Thanks Jan -
    I had the same experience.  Amazon is awesome.  I told them there was dust under the glass - no problem.  They sent me a new monitor with 2-day shipping and without charging my card.  They gave me a UPS label and 30 days to return the old one.  Very professional, zero cost on my part.
    - Blake

  • Screen issues - not the glass but the screen underneath the glass

    weird - screen under glass is pixelated - hard to describ but the GLASS IS NOT scratched - but screen is f'ed up - what option sdo I have to fix this

    Think it is an LCD issue - and from everything I am reading this needs to be serviced by Apple - is this type of service free for the first year

  • Unexplained ENVY m6-1207TX digital (not glass) screen crack - is it a manufacture issue?

    I've had my ENVY m6-1207TX for about a year with no problems until now. I had bought with the laptop a 2 year Extended Care Agreement (warranty) and I am wondering if it covers an unexplained 'digital crack' that has appeared on the screen. I say 'digital crack' because it is under the glass screen which is unbroken. I don't know how it was caused.
    It first appeared 3/4 up the left side of the screen at its border and has now extended all the way across to the right side of the screen 1/4 of the way up. Except for some slight image distortion where the crack is and some "digital ink spillage" in the bottom right corner the screen otherwise works perfectly fine. How it got started I have no idea as I look after the laptop very carefully being my first one.
    My question is therefore whether its covered by the warranty mentioned above, (being as it appears) a manufacturing issue. I asked one person in a JB hifi store and he said it was a common problem and was covered by the warranty but when i took it to the JB hifi store that I actually bought it from - he said it wasn't covered... waahhh???
    Anybody know the answers? THANKS!!! 

    Hi @Jacoman ,
    I have sent you a private message. If you are not sure how to check your private message then this post has instructions that will guide you through the process.
    Regards,
    George
    I work for HP

  • Scanning issues from glass to feeder

    I used to be able to scan a page on the glass, then insert the rest of my documents in the automatic feeder, and it would recognize them and start scanning from the feeder.  It no longer works.  Is there a fix for this?

    Hi LPE!
    Thanks for getting back to me. The issue very well could be the printer. I just wanted your OS to find you the direct link for a Firmware update.
    Try updating the firmware to see if that makes a difference. Try your scan again afterwards.
    You can update the firmware from the front panel if you have your printer on a wireless network:
    Getting the Latest Firmware and Product Updates
    If you are connected USB, download the firmware update here: HP Officejet Pro 8600 N911g_n Firmware
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • 3d glasses effect issue

    Hi,
    Long time lurker here.
    I have just realised color difference between left and right on combined image when I use 3d glasses effect (side by side view).
    I'm using split r&l renders from cinema 4d. images looks identical until I use 3d glasses effect.
    when I set up side by side;  the right side always goes a bit darker.
    is it normal ?
    btw. you can check how it looks like
    http://oi40.tinypic.com/ldum9.jpg

    Thank you for your responses, appreciated
    I overlapped left and right frames in photoshop, selected 4 pixel area with selection tool (from yellow) then inverted selection and delete everything except 4 pixels.
    When I separated left and right; I confirmed the difference with the help of the info panel;
    its like r208 g176 b13 vs. r208 g174 b14
    in fact, no issue with over under so I consider it's not about the stereo effect differency.
    In case of display problem I'm going to do this routine with rendered version.
    I'm in little rush right now (thanks to exams) can't deal with it til friday.
    Gonna let you know about how it went.
    Thanks again.

  • Monitor issue - dirt behind the front glass

    I use a pair of LP2475w Monitors for photography. The monitors both have gotten very dirty on the inside between the front glass and the LCP panel.  Is there an easy way to open this up to clean and if so how.  Thanks

    Dan, welcome to the forum.
    Here is what it states in the Manual for the monitors:
    Do not open the monitor cabinet or attempt to se
    rvice this product yourself. Adjust only those
    controls that are covered in the operating instru
    ctions. If the monitor is not operating properly or
    has been dropped or damaged, contact an author
    ized HP dealer, reseller,
    or service provider.
    You will find this warning on P.11 of the manual in the link that I provided.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for

  • AC Adapter for GS60

    I just got my GS60 2PE 3K, and I was curious if anyone has purchased extra AC adapters for it. If so, what's the model number and where did you buy it from? I found one matching the stock adapter's part number here (ADP-150VB), but I don't know if th

  • Can I use a 10 ft USB extension for my HP printer?

    Can I use a 10 ft USB extension for my HP printer?

  • Text field in DDIC

    Hi frnds,   I have created a DDIC table. It has a field of type LCHR of length 800. there is also a preceding INT2 field for this field. But i'm not able to maintain this field directly from a table control or the DDIC directly. How do i do it ? .i.e

  • Select a border

    i try to do a very simple thing i choose a cell an will select a border style. for example a dotted line only at the bottom of the cell. i tried it with the toolbar symbol and also via the information window tools. in bouth ways i am not abel to sele

  • Text information in VA01

    Dear Experts, While creating sales order in VA01, there is a 'TEXT' tab page in 'Display doc header details. In which table are these text information stored when we add any text information at header level. Please suggest? Rajiv Ranjan