Glitches during Export from Illustrator

I recently went from CS2 on an old G5 to CS5 on a newer, more powerful IMac.
Now, when I Export from Illustrator to Photoshop, the resultant files have small glitches: horizontal white lines one pixel high by several or many pixels in width.
The only recourse I have is to manually retouch or try to revive CS2 on my old computer.
There must be a better way?

I hope you can see this. I had to save the psd as a png.

Similar Messages

  • Stitch lines created in a PDF/X-1a due to transparency flattening during export from InDesign

    Has there been any sure fire methods to avoid the digital stitch lines created in a PDF/X-1a due to transparency flattening during export from InDesign? If I attempt to edit the PDF using the Acrobat Edit Text and Graphics tool the PDF is actually carved into sectors and images are not selectable as a whole. Also contrary to what I have read those white lines do indeed image from time to time. I could export as PDF/X4 to preserve the transparency but on occasion it would be advantageous to flatten it before supplying to the printer. Currently using CC and have done the usual things in an attempt to avoid the lines such as all text above transparent objects on a separate layer and 'Clip-Complex-Region' on export.
    Thanks in Advance!

    If the default High Res flattener preset is stitching make a custom preset that's all rasters and use it in the advanced tab of the PDF/X-1a preset

  • Transparent edges in psd exported from Illustrator

    Hello Community,
    I have something going on when I export from Illustrator as a PSD using the artboard. It ends up with a line of transparency around the edges, and is larger than the size of the art exported. It gains about .01 inch around the edges, and when I use 'trim transparent pixels' in Photoshop, it trims it down so it has only gained .07 inches around the edges, but doesn't lose the last line of pixels that are semi-transparent. I am using a script that exports it, then re-imports it and places it in the Illustrator file, effectively swapping the vector for raster. It's part of a larger process I have no control of, so the process is not something I can change, otherwise I wouldn't do that.
    Why is it exporting with this line of transparency on the edges? It's causing white lines to show up in the file that it gets reimported to. Until now it was ok because it only shows in the bleed, which gets trimmed off. From now on, though, this process is supposed to be used for non-bleed items, and the white lines are showing up. Attached is a closeup of an example.
    Does anyone have any ideas how to stop it from happening?
    Cheers,
    Emmy Williford

    Ok I got it you have two choices to get rid of this problem this is what I found out.
    if you export the file with the choice of art optimize or type optimize you will get this antialias artifact if you choose none as the optimize option then you will not get this anti alas artifact since there is no anti alias being applied.
    The second choice is to turn on align to pixel grid and then you can export with art or type optimze as an anti alias option and this artifact will not be present.
    You have a third option and that is to keeep your optimization options and set the color background shape to align to pixel grid on the object level and not the document level using the align to pixel grid option in the transform panel you have to show options in the transform panel to see this option.
    Here is  no align to lixel grid with none for optimizing
    Here it is with Art Optimized
    Here it is with Type Optimized
    Here it it with art optimized and align to pixel grid document wide
    Here it is with the background object only set to align to pixel grid
    I hope this gives you the options you need

  • Lines too dark in PDF exported from Illustrator

    Hi there!
    When I export from Illustrator to PDF, all lines in the design looks black, when they are light grey in the original file.
    Here the examples:
    Any ideas?
    Thanks a lot!

    Did you use Export in Illustrator or the Acrobat process. The Acrobat process would need to have the display resolution and such set to an appropriate setting. If you did the export, then you may have to look at the properties of the export process in Illustrator, not Acrobat.

  • Lines too dark in PDF exported from Illustrator, any idea?

    Hi there!
    When I export from Illustrator to PDF, all lines in the design looks black, when they are light grey in the original file.
    Here the examples:
    Thanks a lot!

    Do you feel that this is a swetting that you would like to be able to set per document so that when it is opened by someone else this feature is turned off?
    Or would you prefer to have this setting turned off by default?
    Would you perhaps think that a warning stating that the document contains thin lines and to see them more accurately the user has to turn it off in the preferences would bve sufficient in case the user would not be so concerned acccurac but is more worried about their vision?
    And yet perhaps a way to set this up in the preferences on the authors side so that when such a document is opened the user is given a choice of how they would like this setting configured in the future?

  • Export from Illustrator as PSD

    Hello
    I updated to 16.2.1 and now when I export from Illustrator as a psd with antialias option unchecked it opens in Photoshop with the edges antialiased.

    I hope you can see this. I had to save the psd as a png.

  • Could someone help with question about PNG export from Illustrator?

    I am having issues with PNG exports from Illustrator not opening up once exported.

    ANd exactly sorry, this is useless. You have not provided any details about your export settings, version of AI, system info, how you are trying to view and so on. Just saying that it doesn't work is simply not good enough.
    Mylenium

  • Exporting from Illustrator to Photoshop: Not Enough Memory To Save File

    Exporting from Illustrator to Photoshop: Not Enough Memory To Save File
    I have plenty of memory (6 GB) and the files I try to export are not very big (some less than 5 MB). Yet, I keep getting the above message: Not Enough Memory To Save File
    Any suggestions?
    Many thanks!

    Up-thread, John Joslin mentioned that "memory" is more than RAM. It is RAM, Virtual Memory, Scratch Disk, and is also governed by the allocations for your Adobe programs (in this case).
    The first thing that I would explore is the Windows Virtual Memory (Page File) settings. This ARTICLE might give you some tips.
    Also, see this ARTICLE on setting up a computer for an editing session. It's geared more towards doing video editing, but applies to PS work too.
    Then, go to Edit>Preferences in both PS and AI, and check the allocation of your memory. Too often, people run that up, and then they starve the OS, or any other programs.
    Good luck,
    Hunt

  • During export from Discover to Excel, Time Format changes to Number Format

    Hi
    I have a seconds column which is of number datatype. But in my report, I am converting the number in *0HH:MI:SS* format. For example, I have *4952534 seconds*. So my report is showing *1375:42:14* which is a Time Format. It looks good when I view the data in Discoverer Viewer or Plus. But when I try to export the data to Excel, the time format gets converted to *4952534 seconds*, which is creating problems. So can you suggest on how can I preserve the formatting during export to excel from discoverer.
    Thanks
    Sachin

    Hi,
    Excel will not implement the 0HH:MI:SS data format, it just gets the field as a number. You will have to format the field into text using the calculation from my previous post.
    Rod West

  • Strange lines when exporting from Illustrator

    I am having an issue that's driving me crazy, I've tried everything and I still can't figure out why it's doing this.
    I created a template in Illustrator,  very basic,  just some 1 inch circles.   The goal is to color them in different color palettes and then save it as a PDF.   In Illustrator,  they show up completely fine,  the pattern fills sometimes have those little seam lines but those don't show up at 100% so I'm not worried about that.
    My issue is that when I bring these graphics into Photoshop,  these little white lines appear in random places,   these are not pattern seam lines and there's no reason I can think of for them to be there.  I figured it may have been a corrupt file,  so I started from scratch and the lines are still there.  I've tried  copying it directly from Illustrator and pasting it into Photoshop,  same issue.  Saving as a TIFF,  same issue.
    Here's an example of the line I'm talking about,  it's faint but noticeable on my screen,   any idea what might be causing this?
    http://img.photobucket.com/albums/v648/hazelsmrf/line.jpg
    The only thing I can think of is that when I turn off all pattern fills and only use solid color fills,  these lines don't show up.  I'm not sure why a pattern fill on a circle two circles away would cause a line to show up on a solid colored circle that's completely unrelated to the pattern fill though.   I am using CS5.

    My Illustrator is fully up to date so that doesn't seem to be the issue.
    I loaded the PDF into Acrobat reader and those lines don't show up there,  they only show up in Photoshop,  strange?
    How I've brought it into Photoshop:  save as,  PDF,  or Tiff,  these didn't work.
    Copied it directly from AI into PS,  did not work.
    Saved as .AI and loaded that into PS,  did not work.
    I just tried it as PSD and it worked!  However I've not been able to duplicate that because every time I've tried to export it to PSD since then it says I don't have enough memory,  argh.   Not sure why it worked the first time and not after.
    Oh and the pattern fills were created with a blank no fill square on the bottom,  then a color filled square on top,  and then a few circles in a diagonal to make a polka dot pattern. Nothing goes past the square,  there's nothing in outline mode to show why it would do this.

  • Poor quality of PNGs exported from Illustrator, in documents that are then PDF'd

    Hi All,
    This is a strange one, which has taken up a lot of time to try to solve.
    I crreated a package of variants on the company logo and exported them from Illustrator as PNGs. I even tried them at 150dpi - then 600dpi.
    When I put them into MS Word or Apache Open Office documents they look perfect: sharp, crisp, perfect curves. Hurrah!
    However, when I export those text documents as PDFs from MS Word or Open Office, the logos look terrible and ragged.
    I have all the settings correct when I export as PDF - lossless compression, print quality etc. If the logos are SVG images [vector], they are perfect PDF'd from Open Office but I can't use those in MS Office. Aggh!
    After a lot of experimentation and discussion over at Apache's forums - there was no solution, until...
    I pasted the logo artwork from Illustrator into Fireworks - of all things - and saved it as a 300dpi flat PNG from Fireworks. That PNG works perfectly when in a document that's exported as a PDF. I wouldn't be at all surprised if one from Photoshop would be good too.
    So - I think that - the common denominator/crux of the matter is the PNG files that are created by Illustrator. They appear great inserted into documents but don't survive a subsequent PDF export well at all.
    I'd love to read any comments on this?
    [Also, for laughs, I tried high res/high quality TIFFs and JPEGs from Illustrator, and had the same problem]

    johnivanwhite wrote:
    Hi John M,
    Microsoft .WMF format. [.WTF?] is pretty good in the resultant PDF. However, when you zoom in to the PDF, the curves get a bit rounded-polygonal, in a smooth-bumpy way. Odd - not a huge issue unless people zoom in. However, it is evident if they print it. And they will.
    Right. What you're seeing there is the Windows Metafile format's lack of support for bezier curves. Close inspection reveals curves that are made up of many small straight line segments.
    However...
    That's why I asked about platform. Running Windows, it's possible to Copy from Illustrator and Paste Special > Enhanced Metafile in MS Office apps. With that procedure, the result is vectors that land in Office without the full WMF conversion and resulting segmentation.
    To demonstrate; I made a small circle in Illustrator with a black stroke and yellow fill.
         1. I exported to WMF, then inserted in Word and exported to PDF.
         2. I copied from Illustrator and used Paste Special > Enhanced Metafile in Word, then exported to PDF
    Compare the results (zoomed to a quadrant in Acrobat):

  • PNG Export from Illustrator 8 Washed Out When Opened in Fireworks MX

    When I export a file containing line art from Illustrator 8 as a PNG and open it in Fireworks MX, the lines and colors are washed out. Why is this?

    If you are talking about the sharpness of shapes, it's probably because the image is now made up of pixels, not paths. When you export the AI file to PNG, you rasterize it.
    If you are talking about color accuracy, you will have to get into the whole issue of color management settings beween your applications.
    Was the AI document CMYK or RGB? What are your PNG export settings? Did you use Export or Save For Web?
    What versions of both programs are you using?
    Can you post AI and FW screen shots of at least a portion of the artwork?
    JET

  • Missing elements when exporting from Illustrator to .dwg

    Hi,
    I am exporting our Illustrator files into .dwg -- as our client will accept them in .dwg format only.
    There is one element that doesn't seem to transfer when exporting.  It is a red circle in Illustrator, but when exported, it shows up as a black outlined circle.  Any way to fix this in Illustrator so that it appears correctly in .dwg?
    We have the same red circle in other projects, and when exporting, they show up in the .dwg perfectly.  I tried to copy that red circle from another project and pasted it into my current project.  I matched the properties with the eyedropper tool, but still, no red circle in .dwg.
    I've included a screen shot of what is happening.  This is the .dwg.  You can see there is a black outlined circle next to the 'D' in the stairwell on the image.  It is supposed to be a red circle.  Below, in the empty space in the lower right corner, I copied and pasted another red circle from another project that is appearing fine in the .dwg.
    Any help would be greatly appreciated!!  Thank you!

    Thread moved from Adobe Captivate forum.

  • Scaling Error when exporting from Illustrator CS to AutoCad 2002

    When I export an Illustrator CS file to AutoCad 2002, I end up with a part that need to be scaled down by .03937 to be 1:1 in AutoCad. I changed my preferences to inches on all units and still have this problem. What setting do I need to change to have this convert straight to AutoCad without secondary operations.

    Hey, guys,
    Thanks so much for the responses. I discovered that one of the issues was that my browser window was set to 125%, causing things to appear a bit blurry. However, I'm still having issues with the "save for web" window. It seems like the left side (the original) should look exactly like what's on my artboard, but as you can see from this screenshot, it's blurry when I zoom up (Both the artboard and save for web window are at 300%). I have the text on the right set to gif, but it still looks the same as the "original" on the left. Shouldn't my orignal in the save for web window look exactly like the text on the artboard? Would this be affecting the files I'm exporting? Thanks so much for the help!
    Peter

  • Help Needed : Video Glitch after exporting from Premiere Pro CC

    Hi all ,
                I have been experiencing this issue for sometime now. I occasionally encounter a video glitch after exporting a video from Premiere Pro CS6 or CC. Sometimes it happens in my NLE timeline , which I have to remove the affected clip that has the glitch/flicker problem from my bin and re-import the clip from my original source, which solves the problem.
                 However , the worst part is when the glitch/flicker happens when I have already exported the video when everything seems fine in the timeline of Premiere . My sequence settings do match with the clip . This issue happens intermittently as I always have to hope for the best when the video exports.
    Here is an Example of what I mean, the glitch/flicker happens at 3:28 of the music video.
                 Hopefully those who have the same issue can share how to troubleshoot this problem . Thank you.
    Regards,
    Elias Lo

    what i did was install final cut pro. I dont have an answer for this but it finish my problem  , how i came up with this idea well i have the new mac pro cilinder that looks like a trash can 64gb memory and all the toys to work fast but again the mov files cannot be seen in the desktop cause premiere and mac and windows and all this ******** they fight about  , and i also have your problem big time o pn every export.
      i have instal final cut onmy older slower imac and i can see everything and the export are perfect
    so i just did that and its perfectly fine basicaly final cut does something that makes ur computer and adobe read all kinds of files  frames format.   i try to explain this to this adobe premiere enginners but they just say uuuuhhhhh

Maybe you are looking for

  • In Lion Server what comes first, DNS, Certificates, or Open Directory

    For a fresh install of Lion Server in what order should things be installed? Certificates, DNS service, Open Directory

  • VAT declaration in XML - Problem with report RFASLDPC

    Hello all, I have a problem with the report RFASLDPC. We use it to download an XML file that we generated which contains the VAT declaration. In the report RFASDLPC, there is a FORM named QUELLFILE_PRUEFEN which stop the report and display a message

  • Add Strokes to Placed Images in Illustrator

    Hi All, I'm having a problem to add a stroke "frame" around my tiff image in Illustrator. My image is a "traced picture" from Photoshop. I used the following technique:- Technique: Use an Effect Choose File > Place and select an image to place into I

  • Mail moved from a different mailbox is not visible in my mailbox

    My  Partner has my Mailbox attached to his Outlook. He moves Mail in to my Inbox and he can see my mail and his moved mail. However I can not see the mail that he moved into my mailbox. I have tried to change the Permissions, but nothing has helped  

  • Freezes with 865PE

    My computer will freeze at random, it can be while I'm writing, or it can be during a game. Occasionally I will get a message that the GPU has reset, but usually I don't get anything. Windows isn't making an event, so I have no way of tracking these