Glitchy and Lagging MBPr 2013
Hey guys,
I've got an early 2013 Macbook Pro retina 15inch, recently tte interface has been very glitchy, slow and lagging quite severely. i can't scroll through safari or any other prgram without it the content jumping up and down slightly like sit's bouncing between two walls. Also when i switch desktops/spaces, a vertical segment of the screen lags behind. Everything seems to be slower in general and just overall glicthy, jumpy and slow. I've had the proble before in mointain lion but one day it just stopped and fixed itself. I've had mavericks since the release date and it's only now it's playing up. The same problem is also appprent when goingin and out of expose. Any help would be greatly appreciated.
Cheers. also
When I had this problem while running 10.9.2 I even decided to take my MacBook to the local Apple Service Provider, since the guys over at apple support couldn't help me. When I got to the guys at the service they told me that it would cost me 80 € to fix this problem and I accepted even if it was kind of a ripoff(guess that's what happens when you don't live in a civilised country with an official Apple Store), since I wanted to get back to the flawless user experience that made me choose to get a Mac in the first place. A few days later I got a call from the service to find out that they weren't able to solve my problem and that apple would probably solve this with the 10.9.3 update, and that's exactly what happened. Now, I hope that Apple reads these posts and maybe decides to fix this problem forever, because when I got in contact with an apple support employe a few days ago afte the 10.9.4 update and nothing seemed to work, he told me that my final hope would be to erase my entire hard drive, then to transfer every file manually. This doesn't seem to be a viable solution at all, since it would be a pretty time consuming process, and I have no guarantee that the apps would recognize the files properly after manually transferring them.
Similar Messages
-
How do I Identify Lead and Lag in consecutive dates with multiple values?
I am using:
Oracle SQL Developer (3.0.04)
Build MAin-04.34
Oracle Database 11g
Enterprise Edition 11.2.0.1.0 - 64bit Production
I would like to identify the Lead and Lags based on two groups.
The groupping is that multiple C_ID can be found in a Single W_ID
and that multiple D_VAL can be found in C_ID
So I would like to identify and mark with "Lead" and "Lag" related to the "consecutivedaysc" (this already matches the D_VAL and C_ID very well) for example W_ID 2004 has C_ID 2059 with D_VAL of 44 for April 2 & 3, the consecutive days are 2 and I would like to correctly mark April 2 as the Lead and April 3 as the lag.
Then I would like to mark the "Lead" and "Lag" independent of if there are multiple D_VAL on the same W_ID
Example that I am having trouble with:
W_ID 2285 on April 10 for C_ID 7847, I don't understand whay I can't get "Lag" in stead of a "Lead" realted to the consecutivedaysw
I would like to eventually have it that the data gets summarized based on W_ID and sinlge (non-repeating) dt with Lead and Lags.
table
with t as (
select 4592 U_KEY,0 D_VAL_PRESENT,2004 W_ID,to_date('4/1/2013','mm-dd-yyyy') dt,2059 C_ID, (null) D_VAL,0 GWID,13 GCID,1 CONSECUTIVEDAYSC,1 CONSECUTIVEDAYSW from dual union all
select 4591,1,2004,to_date('4/2/2013','mm-dd-yyyy'),2059,44,1,11,2,13 from dual union all
select 4590,1,2004,to_date('4/3/2013','mm-dd-yyyy'),2059,44,1,11,2,13 from dual union all
select 4589,1,2004,to_date('4/4/2013','mm-dd-yyyy'),2059,389,1,0,11,13 from dual union all
select 4588,1,2004,to_date('4/5/2013','mm-dd-yyyy'),2059,389,1,0,11,13 from dual union all
select 4587,1,2004,to_date('4/6/2013','mm-dd-yyyy'),2059,389,1,0,11,13 from dual union all
select 4586,1,2004,to_date('4/7/2013','mm-dd-yyyy'),2059,389,1,0,11,13 from dual union all
select 4585,1,2004,to_date('4/8/2013','mm-dd-yyyy'),2059,389,1,0,11,13 from dual union all
select 4584,1,2004,to_date('4/9/2013','mm-dd-yyyy'),2059,389,1,0,11,13 from dual union all
select 4583,1,2004,to_date('4/10/2013','mm-dd-yyyy'),2059,389,1,0,11,13 from dual union all
select 4582,1,2004,to_date('4/11/2013','mm-dd-yyyy'),2059,389,1,0,11,13 from dual union all
select 4581,1,2004,to_date('4/12/2013','mm-dd-yyyy'),2059,389,1,0,11,13 from dual union all
select 4580,1,2004,to_date('4/13/2013','mm-dd-yyyy'),2059,389,1,0,11,13 from dual union all
select 4579,1,2004,to_date('4/14/2013','mm-dd-yyyy'),2059,389,1,0,11,13 from dual union all
select 1092,0,2686,to_date('4/1/2013','mm-dd-yyyy'),7210,(null),0,11,3,3 from dual union all
select 3416,0,2686,to_date('4/1/2013','mm-dd-yyyy'),7211,(null),0,11,3,3 from dual union all
select 18118,0,2686,to_date('4/1/2013','mm-dd-yyyy'),17391,(null),0,11,3,3 from dual union all
select 1091,0,2686,to_date('4/2/2013','mm-dd-yyyy'),7210,(null),0,11,3,3 from dual union all
select 3415,0,2686,to_date('4/2/2013','mm-dd-yyyy'),7211,(null),0,11,3,3 from dual union all
select 18117,0,2686,to_date('4/2/2013','mm-dd-yyyy'),17391,(null),0,11,3,3 from dual union all
select 1090,0,2686,to_date('4/3/2013','mm-dd-yyyy'),7210,(null),0,11,3,3 from dual union all
select 3414,0,2686,to_date('4/3/2013','mm-dd-yyyy'),7211,(null),0,11,3,3 from dual union all
select 18116,0,2686,to_date('4/3/2013','mm-dd-yyyy'),17391,(null),0,11,3,3 from dual union all
select 1089,1,2686,to_date('4/4/2013','mm-dd-yyyy'),7210,51,9,0,11,11 from dual union all
select 3413,1,2686,to_date('4/4/2013','mm-dd-yyyy'),7211,51,9,0,11,11 from dual union all
select 18115,1,2686,to_date('4/4/2013','mm-dd-yyyy'),17391,51,9,0,11,11 from dual union all
select 1088,1,2686,to_date('4/5/2013','mm-dd-yyyy'),7210,51,9,0,11,11 from dual union all
select 3412,1,2686,to_date('4/5/2013','mm-dd-yyyy'),7211,51,9,0,11,11 from dual union all
select 18114,1,2686,to_date('4/5/2013','mm-dd-yyyy'),17391,51,9,0,11,11 from dual union all
select 1087,1,2686,to_date('4/6/2013','mm-dd-yyyy'),7210,51,9,0,11,11 from dual union all
select 3411,1,2686,to_date('4/6/2013','mm-dd-yyyy'),7211,51,9,0,11,11 from dual union all
select 18113,1,2686,to_date('4/6/2013','mm-dd-yyyy'),17391,51,9,0,11,11 from dual union all
select 1086,1,2686,to_date('4/7/2013','mm-dd-yyyy'),7210,51,9,0,11,11 from dual union all
select 3410,1,2686,to_date('4/7/2013','mm-dd-yyyy'),7211,51,9,0,11,11 from dual union all
select 18112,1,2686,to_date('4/7/2013','mm-dd-yyyy'),17391,51,9,0,11,11 from dual union all
select 1085,1,2686,to_date('4/8/2013','mm-dd-yyyy'),7210,51,9,0,11,11 from dual union all
select 3409,1,2686,to_date('4/8/2013','mm-dd-yyyy'),7211,51,9,0,11,11 from dual union all
select 18111,1,2686,to_date('4/8/2013','mm-dd-yyyy'),17391,51,9,0,11,11 from dual union all
select 1084,1,2686,to_date('4/9/2013','mm-dd-yyyy'),7210,51,9,0,11,11 from dual union all
select 3408,1,2686,to_date('4/9/2013','mm-dd-yyyy'),7211,51,9,0,11,11 from dual union all
select 18110,1,2686,to_date('4/9/2013','mm-dd-yyyy'),17391,51,9,0,11,11 from dual union all
select 1083,1,2686,to_date('4/10/2013','mm-dd-yyyy'),7210,51,9,0,11,11 from dual union all
select 3407,1,2686,to_date('4/10/2013','mm-dd-yyyy'),7211,51,9,0,11,11 from dual union all
select 18109,1,2686,to_date('4/10/2013','mm-dd-yyyy'),17391,51,9,0,11,11 from dual union all
select 1082,1,2686,to_date('4/11/2013','mm-dd-yyyy'),7210,51,9,0,11,11 from dual union all
select 3406,1,2686,to_date('4/11/2013','mm-dd-yyyy'),7211,51,9,0,11,11 from dual union all
select 18108,1,2686,to_date('4/11/2013','mm-dd-yyyy'),17391,51,9,0,11,11 from dual union all
select 1081,1,2686,to_date('4/12/2013','mm-dd-yyyy'),7210,51,9,0,11,11 from dual union all
select 3405,1,2686,to_date('4/12/2013','mm-dd-yyyy'),7211,51,9,0,11,11 from dual union all
select 18107,1,2686,to_date('4/12/2013','mm-dd-yyyy'),17391,51,9,0,11,11 from dual union all
select 1080,1,2686,to_date('4/13/2013','mm-dd-yyyy'),7210,51,9,0,11,11 from dual union all
select 3404,1,2686,to_date('4/13/2013','mm-dd-yyyy'),7211,51,9,0,11,11 from dual union all
select 18106,1,2686,to_date('4/13/2013','mm-dd-yyyy'),17391,51,9,0,11,11 from dual union all
select 1079,1,2686,to_date('4/14/2013','mm-dd-yyyy'),7210,51,9,0,11,11 from dual union all
select 3403,1,2686,to_date('4/14/2013','mm-dd-yyyy'),7211,51,9,0,11,11 from dual union all
select 18105,1,2686,to_date('4/14/2013','mm-dd-yyyy'),17391,51,9,0,11,11 from dual union all
select 17390,1,3034,to_date('4/1/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 17389,1,3034,to_date('4/2/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 17388,1,3034,to_date('4/3/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 17387,1,3034,to_date('4/4/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 17386,1,3034,to_date('4/5/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 7305,1,3034,to_date('4/6/2013','mm-dd-yyyy'),5394,44,0,0,7,14 from dual union all
select 17385,1,3034,to_date('4/6/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 14123,1,3034,to_date('4/6/2013','mm-dd-yyyy'),22421,44,0,0,7,14 from dual union all
select 17384,1,3034,to_date('4/7/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 17383,1,3034,to_date('4/8/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 7302,1,3034,to_date('4/9/2013','mm-dd-yyyy'),5394,44,0,0,7,14 from dual union all
select 17382,1,3034,to_date('4/9/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 14120,1,3034,to_date('4/9/2013','mm-dd-yyyy'),22421,44,0,0,7,14 from dual union all
select 7301,1,3034,to_date('4/10/2013','mm-dd-yyyy'),5394,44,0,0,7,14 from dual union all
select 17381,1,3034,to_date('4/10/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 14119,1,3034,to_date('4/10/2013','mm-dd-yyyy'),22421,44,0,0,7,14 from dual union all
select 7300,1,3034,to_date('4/11/2013','mm-dd-yyyy'),5394,44,0,0,7,14 from dual union all
select 17380,1,3034,to_date('4/11/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 14118,1,3034,to_date('4/11/2013','mm-dd-yyyy'),22421,44,0,0,7,14 from dual union all
select 7299,1,3034,to_date('4/12/2013','mm-dd-yyyy'),5394,44,0,0,7,14 from dual union all
select 17379,1,3034,to_date('4/12/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 14117,1,3034,to_date('4/12/2013','mm-dd-yyyy'),22421,44,0,0,7,14 from dual union all
select 7298,1,3034,to_date('4/13/2013','mm-dd-yyyy'),5394,44,0,0,7,14 from dual union all
select 17378,1,3034,to_date('4/13/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 14116,1,3034,to_date('4/13/2013','mm-dd-yyyy'),22421,44,0,0,7,14 from dual union all
select 7297,1,3034,to_date('4/14/2013','mm-dd-yyyy'),5394,44,0,0,7,14 from dual union all
select 17377,1,3034,to_date('4/14/2013','mm-dd-yyyy'),5395,298,0,0,14,14 from dual union all
select 14115,1,3034,to_date('4/14/2013','mm-dd-yyyy'),22421,44,0,0,7,14 from dual
)the script that I am using:
select
t.*/
case
when lag(dt) over(partition by c_id, d_val order by dt, u_key)+1 = dt
then'Lag'
when lead(dt) over(partition by c_id, d_val order by dt, u_key)-1 = dt
then 'Lead_1'
when consecutivedaysc = 1
then'Lead_3'
else 'wrong'
end LeadLagD_VAL,
case
when lag(dt) over(partition by w_id, c_id, d_val_present,gwid order by dt)+1 = dt
then'Lag'
when lead(dt) over(partition by w_id, c_id, d_val_present, gwid order by dt)-1 = dt
then 'Lead_A'
when consecutivedaysw = 1
then 'Lead_B'
else 'wrong'
end Lead_Lag2
from t
order by
W_ID,
dt asc,
C_ID asc
;the results should look like this (but haveing issues)
u_key D_VAL_PRESENT W_ID C_ID DT D_VAL GWID GCID CONSECUTIVEDAYSC CONSECUTIVEDAYSW LEADLAGD_VAL LEAD_LAG2
4592 0 2004 2059 01-APR-13 0 13 1 1 Lead_1 Lead_A
4591 1 2004 2059 02-APR-13 44 1 11 2 13 Lead_1 Lead_A
4590 1 2004 2059 03-APR-13 44 1 11 2 13 Lag Lag
4589 1 2004 2059 04-APR-13 389 1 0 11 13 Lead_1 Lag
4588 1 2004 2059 05-APR-13 389 1 0 11 13 Lag Lag
4587 1 2004 2059 06-APR-13 389 1 0 11 13 Lag Lag
4586 1 2004 2059 07-APR-13 389 1 0 11 13 Lag Lag
4585 1 2004 2059 08-APR-13 389 1 0 11 13 Lag Lag
4584 1 2004 2059 09-APR-13 389 1 0 11 13 Lag Lag
4583 1 2004 2059 10-APR-13 389 1 0 11 13 Lag Lag
4582 1 2004 2059 11-APR-13 389 1 0 11 13 Lag Lag
4581 1 2004 2059 12-APR-13 389 1 0 11 13 Lag Lag
4580 1 2004 2059 13-APR-13 389 1 0 11 13 Lag Lag
4579 1 2004 2059 14-APR-13 389 1 0 11 13 Lag Lag
1092 0 2686 7210 01-APR-13 0 11 3 3 Lead_1 Lead_A
3416 0 2686 7211 01-APR-13 0 11 3 3 Lead_1 Lead_A
18118 0 2686 17391 01-APR-13 0 11 3 3 Lead_1 Lead_A
1091 0 2686 7210 02-APR-13 0 11 3 3 Lag Lag
3415 0 2686 7211 02-APR-13 0 11 3 3 Lag Lag
18117 0 2686 17391 02-APR-13 0 11 3 3 Lag Lag
1090 0 2686 7210 03-APR-13 0 11 3 3 Lag Lag
3414 0 2686 7211 03-APR-13 0 11 3 3 Lag Lag
18116 0 2686 17391 03-APR-13 0 11 3 3 Lag Lag
1089 1 2686 7210 04-APR-13 51 9 0 11 11 Lead_1 Lead_A
3413 1 2686 7211 04-APR-13 51 9 0 11 11 Lead_1 Lead_A
18115 1 2686 17391 04-APR-13 51 9 0 11 11 Lead_1 Lead_A
1088 1 2686 7210 05-APR-13 51 9 0 11 11 Lag Lag
3412 1 2686 7211 05-APR-13 51 9 0 11 11 Lag Lag
18114 1 2686 17391 05-APR-13 51 9 0 11 11 Lag Lag
1087 1 2686 7210 06-APR-13 51 9 0 11 11 Lag Lag
3411 1 2686 7211 06-APR-13 51 9 0 11 11 Lag Lag
18113 1 2686 17391 06-APR-13 51 9 0 11 11 Lag Lag
1086 1 2686 7210 07-APR-13 51 9 0 11 11 Lag Lag
3410 1 2686 7211 07-APR-13 51 9 0 11 11 Lag Lag
18112 1 2686 17391 07-APR-13 51 9 0 11 11 Lag Lag
1085 1 2686 7210 08-APR-13 51 9 0 11 11 Lag Lag
3409 1 2686 7211 08-APR-13 51 9 0 11 11 Lag Lag
18111 1 2686 17391 08-APR-13 51 9 0 11 11 Lag Lag
1084 1 2686 7210 09-APR-13 51 9 0 11 11 Lag Lag
3408 1 2686 7211 09-APR-13 51 9 0 11 11 Lag Lag
18110 1 2686 17391 09-APR-13 51 9 0 11 11 Lag Lag
1083 1 2686 7210 10-APR-13 51 9 0 11 11 Lag Lag
3407 1 2686 7211 10-APR-13 51 9 0 11 11 Lag Lag
18109 1 2686 17391 10-APR-13 51 9 0 11 11 Lag Lag
1082 1 2686 7210 11-APR-13 51 9 0 11 11 Lag Lag
3406 1 2686 7211 11-APR-13 51 9 0 11 11 Lag Lag
18108 1 2686 17391 11-APR-13 51 9 0 11 11 Lag Lag
1081 1 2686 7210 12-APR-13 51 9 0 11 11 Lag Lag
3405 1 2686 7211 12-APR-13 51 9 0 11 11 Lag Lag
18107 1 2686 17391 12-APR-13 51 9 0 11 11 Lag Lag
1080 1 2686 7210 13-APR-13 51 9 0 11 11 Lag Lag
3404 1 2686 7211 13-APR-13 51 9 0 11 11 Lag Lag
18106 1 2686 17391 13-APR-13 51 9 0 11 11 Lag Lag
1079 1 2686 7210 14-APR-13 51 9 0 11 11 Lag Lag
3403 1 2686 7211 14-APR-13 51 9 0 11 11 Lag Lag
18105 1 2686 17391 14-APR-13 51 9 0 11 11 Lag Lag
17390 1 3034 5395 01-APR-13 298 0 0 14 14 Lead_1 Lead_A
17389 1 3034 5395 02-APR-13 298 0 0 14 14 Lag Lag
17388 1 3034 5395 03-APR-13 298 0 0 14 14 Lag Lag
17387 1 3034 5395 04-APR-13 298 0 0 14 14 Lag Lag
17386 1 3034 5395 05-APR-13 298 0 0 14 14 Lag Lag
7305 1 3034 5394 06-APR-13 44 0 0 7 14 Lead_1 Lag
17385 1 3034 5395 06-APR-13 298 0 0 14 14 Lag Lag
14123 1 3034 22421 06-APR-13 44 0 0 7 14 Lead_1 Lag
17384 1 3034 5395 07-APR-13 298 0 0 14 14 Lag Lag
17383 1 3034 5395 08-APR-13 298 0 0 14 14 Lag Lag
7302 1 3034 5394 09-APR-13 44 0 0 7 14 Lead_1 Lag
17382 1 3034 5395 09-APR-13 298 0 0 14 14 Lag Lag
14120 1 3034 22421 09-APR-13 44 0 0 7 14 Lead_1 Lag
7301 1 3034 5394 10-APR-13 44 0 0 7 14 Lag Lag
17381 1 3034 5395 10-APR-13 298 0 0 14 14 Lag Lag
14119 1 3034 22421 10-APR-13 44 0 0 7 14 Lag Lag
7300 1 3034 5394 11-APR-13 44 0 0 7 14 Lag Lag
17380 1 3034 5395 11-APR-13 298 0 0 14 14 Lag Lag
14118 1 3034 22421 11-APR-13 44 0 0 7 14 Lag Lag
7299 1 3034 5394 12-APR-13 44 0 0 7 14 Lag Lag
17379 1 3034 5395 12-APR-13 298 0 0 14 14 Lag Lag
14117 1 3034 22421 12-APR-13 44 0 0 7 14 Lag Lag
7298 1 3034 5394 13-APR-13 44 0 0 7 14 Lag Lag
17378 1 3034 5395 13-APR-13 298 0 0 14 14 Lag Lag
14116 1 3034 22421 13-APR-13 44 0 0 7 14 Lag Lag
7297 1 3034 5394 14-APR-13 44 0 0 7 14 Lag Lag
17377 1 3034 5395 14-APR-13 298 0 0 14 14 Lag Lag
14115 1 3034 22421 14-APR-13 44 0 0 7 14 Lag Lag I place the "wrong" showing that neither the when conditions were no able to work.
any suggestions on a better direction for me to solve this?
Edited by: 1004407 on May 23, 2013 1:16 PM
Then I am trying to get this, not to include C_ID
u_key D_VAL_PRESENT W_ID DT CONSECUTIVEDAYSW LEAD_LAG2
4592 0 2004 01-APR-13 1 Lead_A
4591 1 2004 02-APR-13 13 Lead_A
4590 1 2004 03-APR-13 13 Lag
4589 1 2004 04-APR-13 13 Lag
4588 1 2004 05-APR-13 13 Lag
4587 1 2004 06-APR-13 13 Lag
4586 1 2004 07-APR-13 13 Lag
4585 1 2004 08-APR-13 13 Lag
4584 1 2004 09-APR-13 13 Lag
4583 1 2004 10-APR-13 13 Lag
4582 1 2004 11-APR-13 13 Lag
4581 1 2004 12-APR-13 13 Lag
4580 1 2004 13-APR-13 13 Lag
4579 1 2004 14-APR-13 13 Lag
1092 0 2686 01-APR-13 3 Lead_A
1091 0 2686 02-APR-13 3 Lag
1090 0 2686 03-APR-13 3 Lag
1089 1 2686 04-APR-13 11 Lead_A
1088 1 2686 05-APR-13 11 Lag
1087 1 2686 06-APR-13 11 Lag
1086 1 2686 07-APR-13 11 Lag
1085 1 2686 08-APR-13 11 Lag
1084 1 2686 09-APR-13 11 Lag
1083 1 2686 10-APR-13 11 Lag
1082 1 2686 11-APR-13 11 Lag
1081 1 2686 12-APR-13 11 Lag
1080 1 2686 13-APR-13 11 Lag
1079 1 2686 14-APR-13 11 Lag
17390 1 3034 01-APR-13 14 Lead_A
17389 1 3034 02-APR-13 14 Lag
17388 1 3034 03-APR-13 14 Lag
17387 1 3034 04-APR-13 14 Lag
17386 1 3034 05-APR-13 14 Lag
7305 1 3034 06-APR-13 14 Lag
17384 1 3034 07-APR-13 14 Lag
17383 1 3034 08-APR-13 14 Lag
7302 1 3034 09-APR-13 14 Lag
7301 1 3034 10-APR-13 14 Lag
7300 1 3034 11-APR-13 14 Lag
7299 1 3034 12-APR-13 14 Lag
7298 1 3034 13-APR-13 14 Lag
7297 1 3034 14-APR-13 14 Lag then into this (which I would use where Lead_Lag2 = "Lead_A"
u_key D_VAL_PRESENT W_ID DT CONSECUTIVEDAYSW LEAD_LAG2
4592 0 2004 01-APR-13 1 Lead_A
4591 1 2004 02-APR-13 13 Lead_A
1092 0 2686 01-APR-13 3 Lead_A
11089 1 2686 04-APR-13 11 Lead_A
17390 1 3034 01-APR-13 14 Lead_A but onething at a time.
Thanks for point out the errors Frank, always helpful to know what others see.
Edited by: 1004407 on May 23, 2013 2:36 PM
Edited by: 1004407 on May 23, 2013 4:01 PMIs this the first set you expect?
SQL> with flagged as
2 (
3 select w_id,d_val,dt,u_key,
4 case when lag(dt) over(partition by w_id,d_val order by dt,u_key)
5 in (dt,dt-1)
6 then 0
7 else 1
8 end flg
9 from t
10 ),
11 summed as
12 (
13 select w_id,d_val,dt,u_key,
14 sum(flg) over(order by w_id,d_val nulls first,dt,u_key) sm
15 from flagged
16 ),
17 day_count as
18 (
19 select w_id,d_val,dt,u_key,count(distinct dt) over(partition by sm) cnt
20 from summed
21 )
22 select w_id,d_val,dt,u_key,cnt
23 from day_count
24 order by w_id,d_val nulls first,dt,u_key;
W_ID D_VAL DT U_KEY CNT
2004 01-APR-13 4592 1
2004 44 02-APR-13 4591 2
2004 44 03-APR-13 4590 2
2004 389 04-APR-13 4589 11
2004 389 05-APR-13 4588 11
2004 389 06-APR-13 4587 11
2004 389 07-APR-13 4586 11
2004 389 08-APR-13 4585 11
2004 389 09-APR-13 4584 11
2004 389 10-APR-13 4583 11
2004 389 11-APR-13 4582 11
2004 389 12-APR-13 4581 11
2004 389 13-APR-13 4580 11
2004 389 14-APR-13 4579 11
2686 01-APR-13 1092 3
2686 01-APR-13 3416 3
2686 01-APR-13 18118 3
2686 02-APR-13 1091 3
2686 02-APR-13 3415 3
2686 02-APR-13 18117 3
2686 03-APR-13 1090 3
2686 03-APR-13 3414 3
2686 03-APR-13 18116 3
..... -
Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps internet connection.
Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps. -
MasterPages and SharePoint foundation 2013
Hi
I have created a web application in SharePoint Foundation 2013. I also have created multiple subsite.
I want to change the visual (branding) of the website (and all subsites).
I have created a custom masterpage and wanted to set it as the default master page. But when I do that, everything is now set with that custom masterpage (even the site setting pages, the viewlsts.aspx, settings.aspx).
Is there a way to bind masterpages only with the content pages of my website ?
Any links for info about that ?
Thanks
Richard Martin Web Developer / BI DeveloperHi marric01,
All of the site setting pages, the viewlsts.aspx and settings.aspx is the application page. An application page is an ASP.NET Web page that is designed for
use in a SharePoint Web site. Application pages are stored on the file system of the front-end Web server in the %ProgramFiles%\Common Files\Microsoft Shared\web server extensions\14\TEMPLATE\LAYOUTS directory and exist for every site in a Web application.
This folder is mapped to an Internet Information Services (IIS) virtual directory called _layouts. Every site and subsite will have access to the application pages by using the _layouts virtual directory.
The scenario you have seen is what SharePoint will do when set the master page through Site Settings->Master page. All the pages on the site will apply this master page.
The settings.aspx, viewlsts.aspx and upload.aspx. etc. are application pages, the difference between application page and content page is that: application page store in server 15/Template/Layouts folder, all applications in the SharePoint farm use the same
application page, while content page store in content database, each site use a unique page of them, you can update the page content in different site as you like.
SharePoint by default doesn’t provide a method to set different master page for application pages, and this is not recommended, even if you can change this through update the page directly in the layouts folder, whenever you change it, it will affect the whole
SharePoint farm, on all web applications.
If you really need to this, I would suggest you to custom the ribbon button to direct to your custom specific application page like settings page. The concern by doing this is the default settings page is still available, and if users access the page by typing
the url directly, he will see the default settings page.
Reference:
http://msdn.microsoft.com/en-us/library/aa979592.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected].
Eric Tao
TechNet Community Support
Hi,
Thanks for the information. While waiting for help with this forum, I was playing with SharePoint Foundation 2013 and SharePoint designer 2013. I saw that I can bind custom masterpage for each page that I create.
(Style => Attach => Custom masterpage)
I also managed to bind subsite pages to that same custom masterpage.
Is this a good way to customize the look and feel of my SharePoint foundation 2013 website (We are building a small intranet for about 100 person).
Users are only gona be able to modify content inside the pages. We are (IT dept) the only one that can modify structure, add new pages and modify the look for the website.
Thanks again !
Richard
Richard Martin Web Developer / BI Developer -
I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade
iCloud requires OS X 10.7.2.
-
I am new to the forum, I hope this is the good topic to post my problem.
I have a late 2011 Macbook Pro, and it is getting slower and slower. The performance was bad with Mavericks as well, but now, with Yosemite installed, it is much more worse. I have never reinstalled my system (only upgraded the osx), so it is an almost 3 years old setup. In that time I have installed a lot of applications, and also deleted a lot. About a year ago I upgraded the RAM, but didn't help too much. Now with Yosemite my startup time is more than 5 minutes, and sometimes the startup freezes (and I have to push the power button long to retry). Safari with 5-10 tabs is extreme slow, and lagging when I switch tabs or open new ones. To launch a new app, for example skype, i have to wait 1-2 minutes. Everything is slow. Sometimes my finder crashes, and works only if I restart the macbook. Another example: if I open the downloads folder in Finder, I have the spinning loading icon for about 20-30 seconds, and just after this time can I see the content of the folder.
My console is full of errors, I get new records in every single seconds. I repaired the disk permissions, deleted safari cache, history, etc. but nothing helped.
Many people here attached an "etrecheck" record for their threads, I downloaded the app, and made one scan, you can see my results here, I hope someone with more technical skills can help me!
Thank you in advance!
(and sorry for my english - it is not my mother language)
EtreCheck version: 2.1.2 (105)
Report generated 2014. december 11. 12:59:29 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
10 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
SyncMaster 1680 x 1050 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:55:58
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (130.97 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
StoreJet Transcend StoreJet Transcend 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Transcend 2TB (disk2s2) /Volumes/Transcend 2TB : 2.00 TB (1.91 TB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 67
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/KeyRemap4MacBook.app
[loaded] org.pqrs.driver.KeyRemap4MacBook (9.3.0 - SDK 10.9) [Support]
/Applications/PMHMac.app
[not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.5) [Support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.hypervisor (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.netbridge (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.usbconnect (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.vnic (8.0 18494.886912) [Support]
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Support]
/Applications/Toast 11 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
/Library/Extensions
[not loaded] com.sony.driver.dsccamDeviceInfo00 (1 - SDK 10.7) [Support]
/Library/StartupItems/DoubleCommand
[not loaded] com.baltaks.driver.DoubleCommand (1.7 - SDK 10.8) [Support]
/System/Library/Extensions
[loaded] org.dungeon.driver.SATSMARTDriver (0.8 - SDK 10.6) [Support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Support]
Startup Items: ℹ️
DoubleCommand: Path: /Library/StartupItems/DoubleCommand
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[failed] com.adobe.CS4ServiceManager.plist [Support] [Details]
[failed] com.adobe.CS5ServiceManager.plist [Support] [Details]
[running] com.bjango.istatmenusagent.plist [Support]
[running] com.bjango.istatmenusnotifications.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.sony.SonyAutoLauncher.agent.plist [Support]
[loaded] org.pqrs.KeyRemap4MacBook.server.plist [Support]
[failed] XR_3045NI_Startup_Fax.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[running] com.bjango.istatmenusdaemon.plist [Support]
[loaded] com.bombich.ccc.plist [Support]
[loaded] com.cocoatech.pathfinder.SMFHelper6.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
[running] com.spotify.webhelper.plist [Support]
[running] homebrew.mxcl.mysql.plist [Support]
User Login Items: ℹ️
Flux Alkalmazás (/Applications/Flux.app)
iTunesHelper AlkalmazásHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
GrowlHelperApp Alkalmazás (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
EvernoteHelper Alkalmazás (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Caffeine Alkalmazás (/Applications/Caffeine.app)
Google Drive Alkalmazás (/Applications/Google Drive.app)
Dropbox Alkalmazás (/Applications/Dropbox.app)
DVDAuthorizeHelper Alkalmazás (/Users/[redacted]/Library/Application Support/Helper/DVDAuthorizeHelper.app)
RescueTime UNKNOWNHidden (missing value)
Alfred 2 UNKNOWN (missing value)
SpeechSynthesisServer Alkalmazás (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Skype Alkalmazás (/Applications/Skype.app)
uTorrent Alkalmazás (/Applications/uTorrent.app)
Xmarks for Safari Alkalmazás (/Applications/Xmarks for Safari.app)
Internet Plug-ins: ℹ️
nplastpass: Version: 2.0.11 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 [Support]
ViewRightWebPlayer: Version: 3.5.0.0 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
ResponsiveResize
Save to Pocket
Awesome Screenshot
LastPass
feedly
3rd Party Preference Panes: ℹ️
Double Command [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Growl [Support]
Java [Support]
MacFUSE (Tuxera) [Support]
Perian [Support]
Xmarks for Safari [Support]
Time Machine: ℹ️
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 367.91 GB
Destinations:
Transcend 2TB [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 367.91 GB X 3)
Top Processes by CPU: ℹ️
21% WindowServer
12% Console
8% parentalcontrolsd
6% backupd
6% Activity Monitor
Top Processes by Memory: ℹ️
462 MB mysqld
290 MB mds_stores
290 MB Safari
204 MB Finder
183 MB WindowServer
Virtual Memory Information: ℹ️
2.20 GB Free RAM
6.06 GB Active RAM
809 MB Inactive RAM
1.66 GB Wired RAM
1.87 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 11, 2014, 09:38:41 AM iMovie_2014-12-11-093841_[redacted]s-MacBook.hang
Dec 11, 2014, 12:04:08 PM Self test - passed1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Stuttering and lag during playback when hooked up to TV
Hi,
I recently bought the monoprice mini display port to HDMI adapter for connecting my MBP to my HDTV. I managed to get everything connected without too much problem, but once I started playing HD content through iTunes I noticed that there was substantial stuttering and lag. If I disconnect my computer and watch through the laptop monitor there doesn't seem to be any problem. The strange thing is that my wife's 3-year old macbook doesn't seem to have any problem playing back the same content on our TV using a DVI to HDMI cable.
I've tried using both video chips. If anything, the 9600m GT chip seems to produce MORE stuttering, rather than less. Perhaps I'm dealing with a heat problem here?
Has anyone had similar problems? Any workarounds? I've tried both the 1080 and 720 settings- there wasn't much difference.
Thanks.Thanks, however, I have the correct NTSC setting and I am plugging into the correct jack(s) on the tv but all the pictures are black and white.
I have tried this on several tv's all with the same black and white results
Any other ideas? -
MacBook Pro running slow and lagging during app switches/start
I mean, it's really getting bad. I have to force quit repeatedly and then by some miracle - something takes and the program opens. Most of the time this happens with Photoshop and Firefox (which is what I use most often). PS does not have a bunch of add-ons running or installed. It's pretty much CS3 factory.
I ran Disk Utility yesterday - during the verify disc, it told me to boot from the install disc to fix the 2 errors it found. I backed everything up and I did. Ran all the verifies and repairs from the start disc.
Still running slow and by this I mean when I open an application it takes a ridiculously long time to open the double-clicked document or just the program itself to get to a new doc. I noticed it again this morning with Excel (which is something I don't usually leave open and running).
What else I have done, which helped but just a smidgen ... was to remove all the extra fonts (and I did have thousands) in Font Book. I also removed Font Book entirely because it was another program that was locking up and needing force quit all the time ... and I just plain don't like it. So I installed Suitcase Fusion and only have the bare minimum needed in there (which kind of bothers me since I am used to have thousands on hand that just need to be turned on or off - yes I know, I keep them all off unless they are absolutely needed). But I only have one set in the Suitcase (42 font family).
I got my laptop in Feb ... so this painfully slow and lagging stuff shouldn't be happening. It used to work great. I could have all the apps open, flipping between them, really getting things done.
Here's my comp info:
Version 10.6.4
Processor: 3.06 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3
HD: 500gb but I have 345gb free
Any obvious things I am overlooking? Any suggestions on how to get this fairly new thing back up to speed?
Thanks!HI,
I also removed Font Book entirely because it was another program that was locking up and needing force quit all the time.
Go here for help with fonts.
Font Problems and Management in Mac OS X -
MSO.DLL not installed with "office home and small business 2013"
Hello,
In my 32 bits application, I use the IInPlacePrintPreview interface on a "word.document" OLE object to show a preview of a word document.
That's work fine with Office 2013 Standard Edition (32 bits) on a Windows 7 x64 Edition, but my application crash with "office home and small business 2013" (32 bits).
I have noticed that the call to query the IInPlacePrintPreview interface on the OLE object load the mso.dll of Office into memory.
The mso.dll is installed with the Office 2013 Standard Edition, but not with the "office home and small business 2013" Edition.
I guess the problem is the lack of
mso.dll.
Do you know why the mso.dll is necessary for the preview of a word document ?
How do I install and configure mso.dll on a
"office home and small business 2013" edition ?
Thanks for your help.Hi,
You may try the ODT (Office Deployment Tool) to configure the Configuration.xml file and install the Office 2013 Home and Business edition.
Please refer to the following steps:
1. Downloading ODT from: http://www.microsoft.com/en-us/download/details.aspx?id=36778
2. After downloading the ODT, there will be a Configuration.xml file ODT installed folder. Modify the Configuration.xml file as below so that we can download home business package.
<Configuration>
<Add SourcePath="D:\Office\" OfficeClientEdition="32" >
<Product ID="HomeBusinessRetail">
<Language ID="en-us" />
</Product>
</Add>
<Updates Enabled="TRUE" UpdatePath="D:\Office\" />
<Display Level="None" AcceptEULA="TRUE" />
<Logging Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
</Configuration>
For more information regarding to the ODT, you can refer to the following link:
http://technet.microsoft.com/en-us/library/jj219422(v=office.15).aspx
Should you have any questions, please feel free to let me know. many thanks!
Michael Bai
Office Client Support -
Microsoft Office Home and Business Edition 2013
Dear Team,
We are planning to procure microsoft office home and business edition 2013. We want to procure 50- Microsoft office home and business edition. Please let us know if there is any limitations in the licensing part as you have spoken to one of your
executive in microsoft. As per him we procure as many as per our requirement, it is legal for 200 users.
Thanks,
Rakesh KumarHi,
I haven't found any other limitation in the licensing part except you should install Office on one PC at a time.
If you want to purchase 50 copies, I'm pretty sure there's no problem. But you may have to maintain 50 licence keys along with boxes and invoice, be careful and don't mess them up :)
Regards,
Melon Chen
TechNet Community Support -
When I try and access March 2013 in Calendar the app simply closes. This happens if I click March in the month tape at bottom of screen or if I try swiping from February or April. Is there a fix, I've tried restarting the app and the iPad to no affect
See this discussion with the exact same issue:
https://discussions.apple.com/thread/4690697?tstart=0 -
Tutor 14 with Windows 8.1 and MS Office 2013
Hi all,
Have anybody used Tutor Author and Publisher with Windows 8.1 and MS Office 2013? Are there any known issues/compatibility issues with this? Any information on this is greatly appreciated.
thanks in advance,
SDThat would be great! I would really appreciate if you can try this. I am having trouble creating the master index and desk manual index from tutor Publisher. I have tried with multiple machines but i am running into winkey error. I am already working with oracle for this, but there has been no progress. Kindly update once you are done testing or if you are able to use it without any issues.
thanks in advance,
SD -
I recently purchased a Windows 8 laptop and istalled Office 2013. I then installed iTunes. After moving all my music to my new PC I got iTunes to import it, and then synced it to my iPod (3rd gen.) However, I cannot get iTunes to sync my Outlook Calendar or Contacts with my iPod. When I try it crashes Outlook. iTunes continues to try to sync, but when it finishes my Calendar and Contents are empty (ERASED!). I have de-installed and re-installed iTunes (according to Apple's instructions), repaired Office 2013 and Outlook, scanned for viruses (etc), cleaned out temp folders, defragmented, etc., etc., etc. Has anyone seen this before, and does anyone know houw to fix it? (HELP!)
Well, I guess I have to download some other software to make my apple product work. Really great stuff you guys sell. I will never buy another apple product. My Iphone, Ipod and Itunes are junk
-
PP CC 2014 plays video fine from .mts files, but the audio is glitchy and jumpy.
Premiere Pro CC 2014
OSX 10.9.5
I have imported .MTS files from one Canon C100 into PP through the Media Browser. I kept the file structure intact from the camera when copying. When I play a file in the source or program monitor the video plays back perfectly; however, the audio is glitchy and jumpy. It will skip time, jumping forward and backward seemingly randomly. If I open the same clip in Quicktime 10, it plays back 100% normal. I have restarted, reimported, and even transcoded the files to Pro Res 422 using Media Encoder CC 14. Nothing fixed it. The audio glitches the same way in the transcoded Pro Res Files.
This is only the first of three cards of media. In total I have 120 .mts files in three separate AVCHD folders from a three camera C100 shoot. This leads to another issue I know I will run into. There will be three .mts files named "001," three named "002," etc. I have solved this issue in the past simply by transcoding, but that again failed to work for me thus far. So if I must stick with the .mts files, does anyone know a workflow for using multiple .mts files with the same name in one project/timeline?
ThanksI find it hard to believe that this fixes the root of the problem as the same files playback fine in CS6. CS6 and CC 2014 should be referencing the same codec library on my system, right? If this is the case, then there is something wrong with how CC14 is decompressing the footage with the codecs that are working fine in CS6.
To further this point. I imported the same files into CS6. CS6 played them back fine, so I saved the session and opened it up in CC14. CC14 converted the project file and all media loaded and plays back normal now.
So if this is a codec issue, it would not have been solved by opening the files first in CS6. It also would not be solved as so many others report by moving the files and relinking to the new folder. It seems to me to be an import issue that is solely in CC14, not CC or CS6. -
What is the problem when your camera function doesn't work and lags?
What's the problem when the camera function doesnt work and lags? Can my iPod touch be returned because of this? I have done nothing to damage the product.
My file association for jpg files is correct, if i click on a
jpg, ACDSee starts immediately.Although I am a long time Windoze non-user, I vaguely remember that there's a difference between correct file-type association being set and some application starting at a mouse click on a file icon. I also vaguely remember Windoze file-type association mechanism uses a few action-types. Java Desktop should expect a specific action-type for the association.
Maybe you are looking for
-
Open cursors are NOT closed only by closing the ResultSet or Statement
I've realised that the open cursors are only closed by closing the connection. In my example code I have for-loop with a vector of table-names. For every table-name I start a query to retrieve metainformation (row-size, column-names). Although I clos
-
Fully Close Off Under Delivered Schedule Agreement Line Items
Hi There, I am supporting a customer who is having an issue with line items on a scheduled agreement, which she has closed off, appearing in MIGO. Example: I have a scheduled line item of 100 EA. I GR 90 EA but I am happy with this so I want to clos
-
Error 500--Internal Server Error when using BI Publisher within OBIEE 11g
I'm using OBIEE 11.1.1.6.2BP1 on a Linux x86-64 server and it has been working just fine. We recently started playing around with the BI Publisher component of that installation and every time i go to http://hostname:port/xmlpserver and try to log in
-
How to Restrict the values of Field TASKTYPE on a ALV Grid.?
Hi; Let me explain my problem. I have report written by another abap developer who has gone now. On the ALV Grid there is a field called "Activity Process". By F1 F9 I can read that field depends on table TCATX_TASKTYPES and field TASKTYPE . From s
-
Mapping private attribute in workbench
Hi, The mappingworkbench will not generate a toplink-deployment-descriptor.xml for directly mapped attributes that have accessibility private. Other comments in this forum and weblinks that date from Webgain-Toplink describe that this should be possi