Global setting to hide Airport, TimeMachine for all users?

Is it possible to hide Airport, TimeMachine, and Bluetooth for all OD users?
10.5.6 Server/Clients

Create a computer group in WGM, add the machines you want to manage, go to the Preferences > Network > Sharing & Interfaces tab. Check the three boxes, check Always and click Apply Now.
Make sure that no one is currently logged onto a computer under that computer group as it can cause WGM to freeze, crash, and (occasionally) freeze your ODM.
As for time machine I have not a clue. I just disable it under the local admin in terminal.
defaults write com.apple.TimeMachine DoNotOfferNewDisksForBackup -bool YES

Similar Messages

How do I set Firefox to be usable for all users on one computer?

How do I set Firefox to be usable for all users on one computer?

I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
[https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

How to set the same General settings for all users

Hi Experts,
How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
Regards,
Arti.

Hi Arti!
You can default user settings in a PFCG role, in the "personalization" tab.
If you have a PFCG role that is common to all your users, you can set the default values here.
However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
Matthias

How do I set the about:config settings for all users? iprism keeps prompting from authentication for users.

When users log on and try to open Firefox 23.0.1, users are prompted with Iprism Authentication. We made changes to the firefox about:config values "network.automatic-ntlm-auth.allow.-non-fqdn" and "Network.negotiate-auth.allow-non-fqdn" to true and it works, but only works on a per user basis. How can we set this up for all users?

I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
[https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

Set default Skin and Layout for all users

Hi all,
Im using UCM 10GR3 and i must set an default skin and layout for all users.
Into General Configurations Field > System Variables i set
LMDefaultSkin=MySkin
LMDefaultLayout=MyLayout
But this didnt work. Anybody have a clue?
My skin is working fine but i have to change via My Profile.
Best Regards
Daniel

only new users.
According to metalink, each one of these will overwrite existing user settings.
XuiSearchTemplate=slim
XuiSearchTemplate=dam
XuiSearchTemplate=myview
XuiSearchTemplate=none

How to Set-CasMailbox -ActiveSyncAllowedDeviceIDs (To Allow for all user devices, where I don't know what devices the user has)

I need to change this for all of our users and have created this script so far. Does anyone know how to Allow for all devices?
$mailboxes = Get-casMailbox -Filter {hasactivesyncdevicepartnership -eq $true -and -not displayname -like "CAS_{*"} | Get-Mailbox
foreach ($mailbox in $mailboxes)
#write-output $mailbox.UserPrincipalName
$devices = Get-MobileDevice -Mailbox $mailbox.UserPrincipalName
foreach ($device in $devices){
#write-output $device.deviceid
Set-CASMailbox -identity $mailbox.UserPrincipalName -ActiveSyncAllowedDeviceIDs @{Add=$device}
write-output $mailbox.UserPrincipalName
write-output $device.deviceid

For Exchange issues post in Exchange. You should also just try searching.
http://social.technet.microsoft.com/Forums/exchange/en-US/1ddc526d-f147-444c-a7bb-39d14415f9bc/clear-activesyncalloweddeviceids
This was first on list.
¯\_(ツ)_/¯

How do I set the default audio output for all users

Here's the story. I have a Mac Pro in a classroom that is connected to the audio system via the digital (Toslink) output. The systems are bound to AD and OD with some minor management being performed via MCX (printers, login, etc...)
When a new user authenticates to the system the output defaults to the internal speakers not the Digital Out.
My assumption was that I could configure default 0 key in the com.apple.audio.SystemSettings.plist to AppleHDAEngineOutput:1B,0,1,4:2, which is the digital output.
However it seems that new users are still generated with the Internal Speakers which is AppleHDAEngineOutput:1B,0,1,2:0.
Is there somewhere else that I can configure that default such that all users will default to the Digital Out, AppleHDAEngineOutput:1B,0,1,4:2? Or am I perhaps not configuring the SystemSettings plist correctly?
Most of these tasks were previously taken care of by another technician but he has left and I'm quickly trying to pickup the slack for configuration of our Macintosh environment.
Thanks,
-alex-

Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
If you can figure out how to add the printer name, this can be used to lock the margins.

How to set a common page for all users after loging on?

hi all,
Now "My Dashboard" is the default page after logon.
i want to set a default home page for all users. users can see the home page after loging on.
how to change the default dashboard from "My Dashboard" to "Home page" for all users?
thanks,
dan

Hi,
Steps:
Tried to set default dashboard for all the users.
1. Created a session init block
2. Used data source as select '/shared/SH Test/_portal/Test1' from dual
3. Assigned this value to PORTALPATH session variable
4. In Presentation services > Administration > My account > Default dashboard should be set to 'default'. Then only the dashboard specified in init block will be displayed otherwise My account will override the init block.
5. Save the changes made to rpd.
5. Logout and relogin to see if it is working fine. it is working perfectly fine.
For details please refer the GSC replication document. But it is for all the users.
if customer would like to have user/group based home page.
1. They may need to have 2 separate tables.
i. Group_path_tab with 2 columns. Group_id, portal_path
Have group wise portal path for all the groups
ii. User-group map table
Group_id, Group_name, user_id
User should be part of some group.
2. Then in the init block write the sql should be something like this
select A.portal_path from Group_path_tab A, User_group_map B
where B.user_id = :USER
and B.Group_id = A.Group_id
SO based on USER session variable, it will try to identify the group and then the portal_path.
Finally assign this value to PORTALPATH session variable.
ref:
http://total-bi.com/2011/01/obiee-11g-change-default-dashboard/
Thanks!

How to set toolbar options for all users in Reader

Hi to everybody
I have istalled adobe acrobat reader on a PC and i'd like to hide the toolbar for all user (old and new users) of thes PC.
I'm using windows xp and acrobat reader 7.
I have try to chek the user's folder and system registry but i don't find anything usefull
How can I do that?
Thanks
Andrea

Hi to everybody
I have istalled adobe acrobat reader on a PC and i'd like to hide the toolbar for all user (old and new users) of thes PC.
I'm using windows xp and acrobat reader 7.
I have try to chek the user's folder and system registry but i don't find anything usefull
How can I do that?
Thanks
Andrea

Set PO query for all users in POWL screen

Dear All,
In Purchase order work list (POWL) need to define a new query and set it for all the users.
Request to please let us know how we can create and set that query in POWL for all users?
thanks,
mahesh.

Dear All,
In Purchase order work list (POWL) need to define a new query and set it for all the users.
Request to please let us know how we can create and set that query in POWL for all users?
thanks,
mahesh.

How do I startup an application for all users at login?

I know about launchd, but I want an application to start whenver a user logs in and run as that user. launchd stuff seems to run as root.
I would prefer to set this up to work for all users, but if that can't be done, just for the current user. I have an installer package and Id like to run this command to set this up from a bash script.

I found this bit of code which is very similar to something else I found.
defaults write ~/Library/Preferences/loginwindow AutoLaunchedApplicationDictionary -array-add '{ "Path" = "/path/to/script"; "Hide" = "0"; }'
That doesn't work. Anyone at all, even for a single user, how do I script a command to get an application to start when a user logs in under 10.8?

Default WorkBook file extension for all users of BEx 7 in Offce 2007

Hi Experts
We recently started using office 2007 with BEx 7.
However, many users still has Office 2003 installed.
I am looking to set the default file extension for all users to be .XLS.
I know that this option is available in Client level (Global Settings - Use XLS file format ) but I require that the checkbox will be automatically checked.
Is there a way to do it?
Thanks,
Yaniv

Hello Yaniv,
Yes, you can maintan them globally.
this can be done in registry under :   HKEY_CURRENT_USER\Software\SAP\BEx\Analyzer.
   UseXLSFileFormat
   Type: String Value
   Value true or false
For more information refer to SAP Note 1254112
Regards,
Arvind

Any way to remove all "apps" for all users?`

I get that the new start menu is a compromise, and it's neat that it's "back."
What I'm not clear on, is if it's possible to remove/hide the "apps" for all users.
I'm not keen on having all users have all of these, especially in a corporate environment.
Would be preferable to have none, except for perhaps what's "allowed" by admins.
Standard office users, power users, devs, artists, accountants, most folks at work simply don't have a use for most of these apps. I also don't want bandwidth constantly being used by any of the live tiles. If a user wants to know the weather, they can go to
weather.com. If they want news, this is also available via any number of sites.
The other compromise of having apps "windowed" is also nice, but for an office environment, I just don't see people firing up a sandboxed calculator app (or, any of the other built-in ones).
Sorry, but honestly, I'd honestly just like to know if it's possible to set up a GPO, or use some other method to get the "apps" out of the way of the "standard office user."

Hi techresource0,
Use export-startlayout cmdlet to export the start menu configuration first:
Export-StartLayout
http://technet.microsoft.com/en-us/library/dn283401.aspx
Windows 10 Technical Preview has a new policy under start menu and taskbar:
Meanwhile, I have two thoughts on this if you are planning your environment:
One: a customized image.
Two: customize default profile.
For the first thought, you can uninstall all provisioned windows store app and then deploy this image to your environment. Of course, you can do this in an online system as well.
Removing Windows 8.1 Built-in Applications
http://blogs.technet.com/b/deploymentguys/archive/2013/10/21/removing-windows-8-1-built-in-applications.aspx
For second thought, you may prepare default profile, it would always copy to new created user profile:
Customize the default local user profile when preparing an image of Windows
http://support.microsoft.com/kb/973289
Alex Zhao
TechNet Community Support

Single notification email for all users

Hi friends,
Is there any way of setting a single notification email for all users in oracle 11i so that all the notification email goes to that email address (for test purpose only)?
thanks in advance.
LISAN

See MOS Doc 562551.1 (Workflow Java Mailer FAQ ) and search for "override address". More details in MOS Doc 828812.1 (How To Stop Old Outbound Workflow Notification Email Messages During Clone Activity)
HTH
Srini

Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
Open AirPort Utility, select the Time Capsule, and click Manual Setup
Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
Next, click the Wireless tab located to the right of the Time Capsule tab
Change the setting for Wireless Mode to Off
Click the Internet icon, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
You are all set

Global setting to hide Airport, TimeMachine for all users?

Similar Messages

Maybe you are looking for