Global structure problem

hi experts,
can anybody explain how to change global query to
local query and the global query properties should work for
other queries
thanks in advance
venu

Hi
from the structure right click and select remove reference then save and activate ..
Hope it helps u

Similar Messages

  • I have changed the Descriptions in Global structure u0085the problem is cha

    Hi All,
    I have <b>Restricted Key Figures and Calculated Key figures</b> more than 30 ….
    Based on this RKF and CAK I have Created reports…more than 20…
    Now my user has changed the Discretions of all the Restricted Key Figures and Calculated Key figures..
    <b>I have changed all the Descriptions in Global structure …the problem is changed description is not affecting in Local structure..</b>
    Is I have to drag and droop all the  Restricted Key Figures and Calculated Key figures.. in all the reports.. or is there any alternate   way is there to refresh the all the Queries..
    Regards,
    SHAIK

    Thanks Bhanu and Voodi,
    i am facing one more Issue....this qus i posted before...
    My User Requirement is he want to see the
    <b>Deliver Number , Billing Number Vs Delivery Quantity , Billing Quantity, Invoice Value</b> in One Line.
    I try to generate report in MultiProvider , but it is splitting in Two rows and it is showing Hash against Delivery.
    Need Help….It is my requirement ..
    In all the Sales reports they are seeing like this only….
    I will appreciate your Help…..
    Regards,
    Shaik.

  • Multiple global structures

    Hallo colleagues,
    I have the following problem with global structures:
    - I copied queries with the TA RSZC
    - A deal of them on a development system and a deal of them in a productive
      system
    - In some of the queries a global structures
    - I got for a global structure a new global structure with the same new name as
      well as on the development system and on the productive system
    - After the transport of the new query elements from the development system to
      the productive system I have now for every new global structure two entries with
      the same name, but with a different technical key ( Table RSZCOMPDIR, see
      note 792779 too )
    - I renamed a double entry with the abap RENAME_DULPICATE_ELEMENTS
    - But I have always the problem, that I have now for every global structure two
      entries on the productive system, i.e. I have to maintain now always two global
      structures, if I have to change a global structure.
    - In some of the queries we use the cell-editor too
    Do you know a possiblity ( possibly with a programm directly in the database tables) to change the entry of a global structure in a query ?
    With the query designer it is not possible, because we use the cell editor !!!
    Regards and thank you very much for your help
    Dieter Gerl

    Hallo colleagues,
    I have the following problem with global structures:
    - I copied queries with the TA RSZC
    - A deal of them on a development system and a deal of them in a productive
      system
    - In some of the queries a global structures
    - I got for a global structure a new global structure with the same new name as
      well as on the development system and on the productive system
    - After the transport of the new query elements from the development system to
      the productive system I have now for every new global structure two entries with
      the same name, but with a different technical key ( Table RSZCOMPDIR, see
      note 792779 too )
    - I renamed a double entry with the abap RENAME_DULPICATE_ELEMENTS
    - But I have always the problem, that I have now for every global structure two
      entries on the productive system, i.e. I have to maintain now always two global
      structures, if I have to change a global structure.
    - In some of the queries we use the cell-editor too
    Do you know a possiblity ( possibly with a programm directly in the database tables) to change the entry of a global structure in a query ?
    With the query designer it is not possible, because we use the cell editor !!!
    Regards and thank you very much for your help
    Dieter Gerl

  • Using several global structures in one query?

    Hello Together,
    I want to use several global structures in a query and group them for instance in the rows. I have tried it out, and it does not seem to be possible.
    Any ideas- can I overgo this problem somehow?
    Thanks,
    Elisabeth

    Hi Elisabeth,
    This should help:
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a5632e09411d2acb90000e829fbfe/content.htm

  • Can we use global structure while designing a query on  a multiprovider

    hai friends,
                     If i build a multiprovider on cubes for which the query design  on those cubes contains global sturctures ,
    Can i use those global structures while designing a query on a multiprovider (which contains those cubes)

    Hi Vamsi,
    The structure from the base cubes will not automatically be available for the queries created on the multiprovider. The only way to get the structure there is to copy a query from the base cube to the multiprovider. You can use transaction RSZC to do this.
    Hope this helps...

  • Creating abap program to develop and activate a global table type and global structure.

    Hi friends,
    I want to create and activate a global structure and global table type by coding in ABAP editor only. so can I do that anyhow.
    Please help me.
    Thanks in advance.

    Thanks guys for your fruitful replies, as most of you asked the main purpose of my question, the answer is as follows:
    in fact my purpose to do so is to create a function module that can fetch data dynamically from different database tables based on the codings in different abap program.
    for example: in one abap program i am coding as follows:
    tables: kna1.
    types: begin of itab,
              kunnr type kna1-kunnr,
              name1 type kna1-name1,
              end of itab.
    data: it_tab type standard table of itab,
             wa_tab type itab.
    similarly in other program i am coding as follows:
    tables: vbrp.
    types: begin of itab,
              posnr type vbrp-posnr,
              matnr type vbrp-matnr,
              arktx type vbrp-arktx,
              end of itab.
    data: it_tab type standard table of itab,
             wa_tab type itab.
    so now for both programs i want to call the same function module and fetch data as required in relative programs as mentioned above. in that case how to create that function module?

  • IMac (March 2009) - Invalid Node Structure problem

    Hi All
    I was using my iMac as normal yesterday, when suddenly the system ground to a halt (something I never seen since using OS X). As I had work to do, after about an hour, I restarted, expecting it to be an app misbehaving or something straight forward, but on restart the same thing happened almost straight away.
    So, I restarted again, only for the iMac to get stuck on the blue screen which follows the grey 'cog' screen. After looking through these discussions, and some other Mac forums, I booted from the installer disk, tried to run Disk Utility, which found issues and couldn't repair the disk.
    I then tried Safe-User mode and fsck, which reported the aforementioned Invalid Node Structure problem. After checking a few more forums, I thought I would try to Erase the disk and reinstall Mac OS. I restored from my Time Machine backup, and finally got it to start, but the system moved at a snail's pace, and wouldn't open any apps or files.
    I've tried again with fsck, and also fsck_hfs -r /dev/disk0s2 but all I get is the same error message:
    disk0s2: I/O error.
    Invalid Node Structure
    (4, 38403)
    ** Volume check failed.
    /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
    So, does anyone know if there is anything I can do to save the iMac? Or does it need a new HD? It is my primary work computer, so I really need to get it back, and after buying it in the UK, am now in France for 6 weeks, so it's difficult for me to take it to an Apple specialist.
    Any help would be greatly appreciated, thanks in advance,
    Daniel

    As the last user stated, Disk Warrior maybe able to correct it, however if you search the net, you will see there are more than one user with this problem. I had the same problem, however, my machine is out of warranty, It started like you are saying, I RAN disk warrior which corrected the problem long enough to boot the system. In a matter of 10 minutes or so, the system started pausing (apps hung, but in a matter of seconds recovered). I was checking the disk with fsck_hfs and fsck while booted from a USB drive with a maintenance install of 10.5.6. After running fsck the 5th time with different options suggested from the internet, I rebooted with my disk warrior DVD only to find the drive NOT mounted, Drive utility see's it (even can attempt to run disk repair, but it locks up the system when trying this). Disk Warrior doesn't even see the disk to run a directory repair, although in the "check s.m.a.r.t status it sees it as a sata device, and SAYS ITS NORMAL).
    Since my iMac was out of warranty, I followed the online instructions to replace the hard drive (not too difficult) and everything is fine now.
    The old drive still wont mount, but another utility I bought (data rescue II) has been able to quick scan it and access all the data, even though it wont clear a fsck fsck_hfs or disk warrior, anyways, get it back while you can, IT IS THE hard drive itself, and lots of other iMac users online with the same issue (can you say WHY is my iMac SOOO HOT on the apple in the back (right where the drive is and not sufficient cooling in my opinion, but hey, some people might want to lay their computers face down and fry eggs on the it or something... ))
    -SD

  • How can I edit a global structure?

    I created a structure and saved it.  Now, i need to edit that. Can anybody tell me how can i do that?

    Hi
    If u change the global structure where ever it is used that structure  in other queries the changes will effect in all other queries  also.If u want made the changes for a pirticular query then go to report desighner and go to that structure and right click on that and use Remove reference option .then those changes will be applicable for that query means the structure will be come local.
    Thanks& Regards

  • I use global structure in another report how can i make it local ?

    i use global structure in another report how can i make it local ?

    Naresh,
    Right click on structure and choose remove reference. Then you can add new fields, and this structure is local.
    Hope it Helps
    Srini

  • Query regarding global structure

    I have a table ZGKMASTER with custid and custnames fields.I need to create a global structure with a component of type custid in SE11.When I tried,strucked with the thinking of what to give in component type,I tried zgkmaster-custid (just a try).But it says component not activated.How to go about this?
    Thanks in advance.

    If your structure needs to reflect the exact structure of your table, create a structure like this:
    e.g. Structurename ZGKMASTER_S
    Component   Component Type
    .INCLUDE      ZGKMASTER
    That's it, the fields in your structure have exactly the same names as they have in your table.
    If you want to create a structure that contains only a few fields of your table, do the following:
    e.g. Structurename ZGKMASTER_S
    Component   Component Type
    custid           'Name of data element you are using in your table for that field'
    field01          'Name of data element you are using in your table for that field'
    field02          'Name of data element you are using in your table for that field'
    Regards,
    Michael

  • Global structure

    HI Bw gurus,
    Can we create a global structure using other global structures?
    Thanks in advance.
    Sapna

    Hi Sapna,
    Yes You Can.
    Just Drag a GlobalStructure  to Rows right Click on the Structure -> Select Remove reference.add new Selections or formulas right click on Structure-> Save as give a Description for the New Global Structure.
    Assign Points if Useful.
    Hope it helps.
    Thanks,
    -Vijay

  • Convert BeX query Global structure to local structure

    Hi Experts,
    How to convert a BeX query Global structure to local structure?  Can anyone give the Steps involved.
    Thanks in Advance,
    Namrata.

    Hi Sanchana,
    BeX query Global structure to local StructureSteps:
    In a local structure when you want to add structure elements that are unique to the specific query. Changing the global structure changes the structure for all the queries that use the global structure. That is the reason you go for a local structure.
    Coming to the navigation part->In the BEx Analyzer-> from the SAP Business Explorer toolbar---> choose the open query icon (icon that looks like a folder) ->On the SAP BEx Open dialog box->Choose Queries--->Select the desired InfoCube --->Choose New.
    In the Define the query screen->In the left frame-> expand the Structure node.
    Drag and drop the desired structure into either the Rows or Columns frame->Select the global structure->Right-click and choose Remove reference.A local structure is created.
    Remember that you cannot revert back the changes made to global structure in this regard. You will have to delete the local structure and then drag n drop global structure into query definition.When you try to save a global structure, a dialogue box prompts you to confirm changes to all queries.
    Hope this info helps..
    Cheers,
    Tanish

  • Change in global structure in one query

    Hi,
    1. I have some five queries already developed. Here in all the five queries i am using one global structure. I have a requirement tp change the global structure, Now after i change the global structure in one query1 do i need to transport only that query1 or i have to transport all the five queries for the change to get reflected.
    2. There are five workbooks also developed for the corresponding queires.  After changing the queries do i need to update the output result in all the workbooks as well?
    Here in the global structure the keyfigures are replaced with new keyfigures?
    Little confused , need help? Please answer my two questions
    Thanks,
    rani

    >
    rani wrote:
    > Hi,
    >
    > 1. I have some five queries already developed. Here in all the five queries i am using one global structure. I have a requirement tp change the global structure, Now after i change the global structure in one query1 do i need to transport only that query1 or i have to transport all the five queries for the change to get reflected.
    >
    >
    >  Thanks,
    > rani
    If you changed the global structure then transport the structure not the query.
    Go to transport connection in RSA1 choose Query elements -
    >Structures.
    Select your structure and transport.
    That should do.As long as you use "Restore to initial query" in the dataprovider properties of the workbook it should reflect your changes else you need to change at workbook level too.
    Hope this helps.

  • Replacing 20 fixstatements by Global Variable - Problem 255 bytes length

    Hello,
    we have an issue in businessrules with setting the fix statement on 1 dimension:
    we currently use Fix (@RELATIVE("CBU_ALL",0) ) - on level 0 are approx. 3000 members - on medium level are 20 CBUs Seat and 20 CBUs Door
    we have approx. 20-30 similar businessrules - which either calculate on seat or door CBUs
    the requirement is to either calculate with a rule the 20 CBUs for Seats or the 20 CBUs for Doors
    as we currently do not fix properly on either Seat or Door CBUs, we calculate approx. 1500 empty members (empty, if fix in another dimension done correctly) - tests showed, that this doubles the time which would be needed.
    I know we could easily set 20 fixes in each business rule:
    @RELATIVE("CBU_BMW_Seat",0)
    ....20 more....
    @RELATIVE("CBU_Ford_Seat",0)
    (the fix above would then exclude the 1500 members, which are below:
    @RELATIVE("CBU_BMW_Doors",0)
    ....20 more....
    @RELATIVE("CBU_Ford_Doors",0)
    unfortunately, the number of CBUs/Customers is frequently renamed or some are added, so I can not afford to built these 20 fixstatements into 20 different businessrules and maintain them all the time.
    I thought of using UDAs or Attribute Values -
    but it seems not to be possible in a fixstatment to combine a relative or Children fixstatement with UDAs, which are set on the upper member ?
    I assume it works, if I classify all 3000 level 0 members with UDA or attribute SEATS or DOORS - but that's inefficient
    @RELATIVE("CBU_BMW_Seat",0) AND @UDA(CBU,"SEATS")
    @CHILDREN("CBU_BMW_Seat") AND @UDA(CBU,"SEATS")
    @Descendants("CBU_BMW_Seat") AND @UDA(CBU,"SEATS")
    @UDA(CBU,"SEATS")
    generally, it seems not to be allowed to combine Children or descendant fixes with any other relations or conditions ?
    @CHILDREN(@Match(CBU," Seat") ) (attempt to search for all children of all CBUs with Seat in its name)
    So the idea is to define 2 global variables:
    1 for Seats and 1 for Doors:
    [SEAT] includes then then: @children("CBU_BMW_Seat") ... 20 more @children("CBU_Ford_Seat")
    advantage would be, we can maintain the list of CBUs in 1 place
    my problem is: length of global variable is limited to 255 bytes - I need 800 to 900 digits to define the 20 CBUs
    having 8 global variables instead of 40 CBUs referenced in Fixstatements is not really an advantage
    even if I would rename the CBUs to just S1,S2,S3,S4 D1,D2,D3 (S for Seat, D for Door) (and use aliases in Planning and Reporting with full name to have the right meaning for the users), it does not fit into 1 variable: @children("S1"), @Children("S2"), ..... is simply too long (still 400 digits)
    also other attempts to make the statement shorter, failed:
    @children(@list("CBU_BMW_Seat","CBU_Ford_Seat",.....)) is not allowed
    is there any other idea of using global variables, makros, sequences ?
    is there a workaround to extend global variable limit ? we have release 9.3.1 - is this solved in future releases ?
    are there any other commands, which I can combine in clever way in fixstatements with
    @relative
    @children
    @descendants
    with things like @match @list ?
    (Generation and Level are no approrate criteria for Separating Seat and Doors, as the hierarchy is the same)
    please understand, that as we use this application for 5 years with a lot of historic data and it's a planning application with a lot of webforms and financial reports, and all the CBU members are stored members with calculated totals and access rights and setup data on upper members,
    I can not simply re-group the whole cbu structure and separate Seats and Doors just for calculation performance
    CBU dimension details is like this:
    Generation:
    1 CBU_ALL
    2 CBU_BMW
    3 CBU_BMW_Seat
    4 Product A
    4 Product B
    ..... hundreds more
    3 CBU_BMW_Door
    4 Product C
    4 Product D
    .... hundreds more
    2 CBU_Ford
    3 CBU_Ford_Seat
    4 Product E
    4 Product F
    .... hundreds more
    3 CBU_Ford_Doors
    4 Product G
    4 Product H
    .... hundreds more
    20 more CBUs with below 20 CBUs Seat and 20 CBUs Door

    How hard would it be to insert 2 children under CBU_All? Name them CBU_Seats and CBU_Doors, then group all the Seats and Doors under them.
    Then your calc could be @Relative(CBU_Doors, 0).
    I know it's not always easy or feasible to effect change to a hierarchy, but I just had the thought.
    Robert

  • BAPIUSNAME Structure Problem on R/3 4.7, WAS 6.20

    Hello guys,
    As a part of my bachelor thesis I am consuming WS-enabled BAPIs and have encountered a problem on WAS 6.20 that has not appeared on any of the following versions of WAS:
    When I try to retrieve the WSDL for BAPI_USER_GETLIST, I receive a time out error, which has not happened when invoking any other WS-enabled BAPI on the same system. And what I found, was that USERLIST table parameter of type BAPIUSNAME prevented the export of the BAPI as WS. The structure BAPIUSNAME is activated in the Dictionary.
    That is why I created a structure ZBAPIUSNAME with exactly the same attributes, activated it and used it instead of BAPIUSNAME. Alas, the result was the same.
    I would be very thankful, if somebody could give me a hint what is going wrong there.
    Thanks.
    Best wishes,
    Petromil Petkov

    Hi Achim,
    Thanks for your reply. When I said ITS available with EP, I actually meant WAS 6.40 only. I think my words miss guided you. I do not have stand alone ITS installed in my landscape. Let me rephrase my question.
    I have,
    1) R/3 4.7 with WAS 6.20
    2) EP 6 SP 15 with WAS 6.40(which has abap integrated ITS)
    in my landscape.
    I need to provide a R/3 transaction on EP using transaction iView. In order for transaction iView to work, is it possible to use the ITS integrated with WAS 6.40 to connect with R/3?
    OR
    I need to have a separate ITS installation and connection will be R/3 4.7 (WAS 6.20) -> ITS (stand alone) - WAS 6.40(integrated ITS) EP.
    Hope I made my question clear.
    Let me your response.

Maybe you are looking for

  • How to validate for-each path

    I have following for-each path: <?for-each:G_ACCT/LIST_G_INVOICENUM/G_INVOICENUM?> However, sometimes there is no data for child group LIST_G_INVOICENUM. I want to check if no child group, then change the path to <?for-each:G_ACCT?> Is there a way to

  • CS4 or 5 InDesign and Win 7

    I installed my registered CS4 ID on my 64-bit Dell Vostro running Windows 7. ID opens and brings up my files but won't let me highlight type and change the style or size nor can I change the color using swatches. A techie at work suggested I download

  • ActiveSync Calendar and Daylight Saving

    Israel moved to Daylight Saving time and now all meetings scheduled by someone on that timezone are one hour off. - Meetings look okay on Outlook or OWA - the iPhone clocks are adjusted to the time change. In addition to my other post on meetings not

  • InDesign Type on a Path tool not available in toolbar

    My InDesign 6 does not have a Type on a Path tool. The type tool icon in the tool bar does not have a fly-out option where I should be able to find it. I'm pretty sure it was there at one time. Any suggestions on how to restore this?

  • I'm getting an error when trying to update my ipod through Itunes (1413)

    I have a black 30gb ipod video, Itunes tells me that a newer version of the Ipod software is available (1.2) so I click update. I get an error saying The iPod "IPOD" could not be updated. An unknown error occured (1413). What do I do? Thanks in advan