Gmail Exchange Activesync Now Works??
So I had exchange activesync set up through gmail for my calendar and I had the mail turned on and it always gave an error because it didnt work with gmail. Well today all of a sudden it has started bringing the mail through. Anyone know if it official works now then?
Well I have been using it for Calendars and Contacts for quite some time now (with option for Mail turned off) and use IMAP for gMail (as I find this is just fine for me).
But pulling up their page about how to setup (same page I used before) after reading your post, I see them listing email push now.
http://www.google.com/mobile/products/sync.html#p=apple
Similar Messages
-
Microsoft Exchange ActiveSync not working in Mobile Network – Blackberry Z10
Microsoft Exchange ActiveSync not working in Mobile Network – Blackberry Z10
I have set-up office email account in Microsoft Exchange ActiveSync this work only over office Wi-Fi not working outside of office Wi-Fi range. When I back to office all new e-mail loaded automatically. I have no problem with yahoo email setup in the same Z10 hand set work in both Wi-Fi and Mobile network. I have data plan with my carrier. Both emails were working in my previous Blackberry hand set Bold 9900. But with this New Z10 this become a problem
What could a the problem and I need help pleaseThe URL you provided https://... does require SSL as it has a "s".
Have you tested the server OMA setup with a notebook or desktop (https://webmail.domain.com/OMA)?
You should receive a login prompt for username & password following by an Inbox listing of messages.
We used this step to verify server setup before configuring an iPhone. Lastly, we made certain that connectivity would work from outside or within our company by doing the following:
1) created A record for webmail.domain.com to a public IP that route through the firewall on 443 to the Exchange server's private IP - this handles external traffice
2) added an internal DNS record for webmail.domain.com to the private IP of the Exchange server.
This ensures that webmail.domain.com sync's to exchange from outside or from within the Enterprise. -
Exchange Activesync stop working
On my N8 (Belle 111.040.1511.263.01) Exchange Activesync has stopped receiving new emails and does not syncronize agenda. Sending emails works.
On PC and Ipad connected at the same server all is OK.
I have not modified any configuration, simply it stops working...
Maybe the last agenda update caused malfunction?
Thanks for answers.I have reinstalled account many and many times, I have create a new account, (@hotmaiil.it, @hotmail.com) but problem remain. It works for an hour, then stop synchronizing.
AND ON IPAD ALL WORKS!
I'm still waiting for an answer or suggestion. Where is Nokia support? -
SBS 2003 R2 premium (with ISA 2004) Exchange ActiveSync not working
A client has a SBS 2003 R2 premium (with ISA 2004) and wants to sync iPhones and Android phones.
When using the Microsoft Remote Connectivity Analyzer and selecting 'Exchange ActiveSync' we get 'The test of the FolderSync command failed. Exchange ActiveSync returned an HTTP
500 response.'
We tried every solution we could find on the internet, without success.
This is what we tried and checked so far:
- fixed IP, DNS, trusted SSL (comodo) seem all OK
- Exchange 2003 SP2 and ISA 2004 SP3 installed.
- RWW and OWA working fine.
- tests with iPhone and Android -> 'cannot get mail. The connection to the server failed'.
- event viewer reveals no further clues.
- ran CEICW several times enabling and disabling most remote options (OWA OMA,...)
- manually checked all vDir settings in IIS6
- tested with different accounts, created a testaccount without any administrative privileges in Active Directory.
- surfing to servername/microsoft-server-activesync from local network and to domain/microsoft-server-ActiveSync from external computer both give: HTTP 501/HTTP 505 error as expected.
- reset the default virtual directories
- on ISA a query by dest port (443) shows traffic reaching the ISA server ending in:
Log type:
Web Proxy (Reverse)
Status:
500 Internal Server Error
Rule:
SBS OMA Web Publishing Rule
Source:
External ( XX.XX.XX.XX:0)
Destination:
( XX.XX.XX.XX:443)
Request:
POST
Filter information:
Req ID: 1c6d0bea
Protocol:
https
User:
anonymous
Could anyone give me any pointers on what I need to do to get this working please?
Many thanks in advance for your assistance.
Regards
Jean-Paul Laffargue
ARCOM BVBAI used to have a SBS2003 on ISA running activesync with no issues so I'll try and give you guidance although it's been a while. I gather this is the first time use of this feature on this SBS? If so make sure you follow the instructions here:
http://technet.microsoft.com/en-us/library/cc182239.aspx
Also make sure you've enabled all mobile services in exchange features and updated your users with the Mobile User profile (I think they need to be members of the Mobile and Remote Web Workplace groups in Manage Users IIRC). Anything in the event logs?
Also, for some phones you need to manually download the certificate if you use a self-signed type.
Note that in the end it may be time to replace this soon to be unsupported ISA with a separate firewall (or a "free" Untangle box) and go to a one NIC solution. It simplifies things and you need to do that anyway to transition off SBS2003 when it is
unsupported next year.
-- Al -
Exchange ActiveSync not working if form based authentication or SSL enabled
Hi,
I just wanted to share my experience setting up Exchange with iPhone. In case your exchange account on iPhone 2.0 is setup correctly and it synchronizes (no error messages received during the validation process) but you cannot see any email, calendar or contact items you may have the following issue:
http://support.microsoft.com/Default.aspx?kbid=817379The URL you provided https://... does require SSL as it has a "s".
Have you tested the server OMA setup with a notebook or desktop (https://webmail.domain.com/OMA)?
You should receive a login prompt for username & password following by an Inbox listing of messages.
We used this step to verify server setup before configuring an iPhone. Lastly, we made certain that connectivity would work from outside or within our company by doing the following:
1) created A record for webmail.domain.com to a public IP that route through the firewall on 443 to the Exchange server's private IP - this handles external traffice
2) added an internal DNS record for webmail.domain.com to the private IP of the Exchange server.
This ensures that webmail.domain.com sync's to exchange from outside or from within the Enterprise. -
Exchange ActiveSync Stopped working....
I thought about that too but the error message didn't jive.
brian wing wrote:
Did your SSL certificate expire?Clients can no longer access mail via their mobile phones. I ran a test on testconnectivity.microsoft.com and got the following error:
An HTTP 401 Unauthorized response was received from the server. This may be the result of invalid credentials or a configuration problem on the Exchange Server.
Credentials are correct. It's SBS2011. No earlier versions of Exchange Server, no Exhchange Server 2003.
I am not sure where to go from here, any help would be greatly appreciated.
This topic first appeared in the Spiceworks Community -
SBS 2008 - Exchange Activesync not working through cellular broadband connection
nevermind - issue resolved
Okay, after further testing, it is something related to the Verizon broadband network.
something incompatible with router being behind a Star2Star VoIP appliance.
Hi DondersConsulting,
Glad to hear that the question has been resolved and thanks for sharing in the forum. Your time and efforts are highly appreciated.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I currently have all my mailboxes on my Exchange 2003 server and I introduced my first Exchange 2010 server into the same environment so they are running co-existent. The mailflow is functioning properly so now I need to test out the activesync. From
what I've read, you have to create a SSL certificate with SAN on the Exchange 2010 server and create a legacy.domain.com name to point to the Exchange 2003 server. Then replace out the existing SSL certificate on the Exchange 2003 server with the
new one that was created for the Exchange 2010 server. However, my question is that if this does not work could I easily revert back to the original settings where Exchange 2003 server is doing the activesync instead of Exchange 2010? That way
I would not disrupt activesync from working.The legacy url is not important for activesync, but:
Enable Integrated Windows authentication on the Microsoft-Server-ActiveSync virtual directory on the
Exchange 2003 back-end server
http://technet.microsoft.com/en-us/library/ee332348(EXCHG.140).aspx
once you point your external url for active sync at your 2010 it should proxy the 2003 active sync -
ActiveSync stops working after migrating from Exchange 2007 to Exchange 2013
We have started the migration from Exchange 2007 to Exchange 2013. We've followed best practices and everything is working great except ActiveSync. I've performed Exchange migrations in the past so this is nothing new for me. I've also been referring to
a great guide which has been a big help,
http://www.msexchange.org/articles-tutorials/exchange-server-2013/migration-deployment/planning-and-migrating-small-organization-exchange-2007-2013-part1.html.
Once a user is migrated from Exchange 2007 to 2013, ActiveSync stops working properly. Email can be pulled to the device (Nokia Lumia 625 running Windows Phone 8) by performing a manual sync. But DirectPush is not working. The strange part is it's not affecting
everyone who's been migrated. Anyone who is still on Exchange 2007 is not affected.
At first I thought it was our wildcard certificate. 99% of our users are running Outlook 2013 on Windows 7 or higher but we do have a few terminal servers still running Outlook 2010. Outlook 2010 was giving us certificate errors. I realized it was the wildcard
certificate. Rather than making changes to the OutlookProvider I simply obtained a new SAN certificate. Although that resolved the issues for Outlook 2010 users, ActiveSync was still a problem.
Rebooting the phones and removing the email account from the user's device and re-adding it didn't resolve the issue either.
Then I performed an iisreset on the CAS server. This didn't help either. I didn't know it at the time, but I was getting closer...
I tried using the cmdlet Test-ActiveSyncConnectivity but it gave me the following error:
WARNING: Test user 'extest_0d9a45b025374' isn't accessible, so this cmdlet won't be able to test Client Access server
connectivity.
Could not find or sign in with user DOMAIN.com\extest_0d9a45b025374. If this task is being run without
credentials, sign in as a Domain Administrator, and then run Scripts\new-TestCasConnectivityUser.ps1 to verify that
the user exists on Mailbox server EX02.DOMAIN.COM
I started reviewing how Exchange 2013 proxied information from the CAS to the mailbox server and realized the issue may in fact be on the mailbox server.
I performed an iisreset on the mailbox server and all of a sudden ActiveSync started working again. Awesome!
I can't explain why. The only thing I can assume is when some users were migrated from 2007 to 2013 something wasn't being triggered on the Exchange 2013 side. Resetting IIS resolved the issue. I guess I'll have to do an IIS reset after I perform a batch
of migrations. Disabling ActiveSync and re-enabling it for the affected users didn't help - only the IISRESET resolved the issue.
If anyone has any information as to why this happens, please chime in. Also, if anyone knows why I can't run the Test-ActiveSyncConnectivity cmdlet, I'd appreciate the help.
Thanks.Hi,
In Exchange 2013, the Public Folder is changed to Public Folder mailbox instead of Public Folder in Exchange 2007 database.
Due to the changes in how public folders are stored, legacy Exchange mailboxes are unable to access the public folder hierarchy on Exchange 2013 servers. However, user mailboxes on Exchange 2013 servers or Exchange Online can connect to legacy
public folders. Exchange 2013 public folders and legacy public folders can’t exist in your Exchange organization simultaneously. This effectively means that
there’s no coexistence between versions.
For this reason, it’s recommended that prior to migrating your public folders, you should
first migrate your all legacy mailboxes to Exchange 2013. For more information about migrating public folder from previous versions, please refer to:
http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
(Please note the What do you need to know before you begin part in this link)
Regards,
Winnie Liang
TechNet Community Support -
Today I deleted a gmail account using my computer. I also added a new work gmail address. Now I want to sync my phone and tablet with the new email address. I've looked all over and can't find out how to do it.
PegHi there T&P63385!
Look no further! I have the answer for you! You can add a new email account to your android device by following these steps: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=31401
Now I do want to let you know that your phone has a "main" gmail account. If this "main" gmail account was the one you deleted it may be best that you reset your phone and activate it to your new gmail address.
The reason I recommend doing this is all of your purchased application information is also tied to your gmail.
Ensure your personal information is backed up (contacts, pictures, etc) and follow these steps to Hard Reset your phone:http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=31308
Let me know if you have any other questions!
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport -
I updated my iphone 4S with iOS 6.1.3 and now I cannot retreive or send my e-mails. We have an Exchange server at work. I still receive the e-mails on all my devices just fine and I can see the subject headings & a small portion of the body of the e-mail, but when I open the e-mails there is no body and it reads, "This message has not been downloaded from the server". Very aggrevating and is not helping my business at ALL!! Same has happened with both iPads we own now.
Delete then add back the exchange acct on each device.
-
Exchange / ActiveSync - Works for a day or so, then stops
I've had my iPhone 3G since launch and have configured it to work with my Exchange 2003 server utilizing activesync at work. It will connect and sync fine for a day or so, however then it will start giving me a "cannot get mail" "cannot connect to server" error message. The phone has plenty of signal and can reach the net, the exchange box is online and functioning properly. If i delete and recreate the account on the iPhone it starts syncing properly again, however it's only a matter of 24-48 hours before i have to repeat this process...any suggestions?
Same here since beta. I'm an Exchange admin and we've been seeing this since the last 2 beta releases before iPhone OS 2.0. Running Exchange 2003 SP2. We set up ActiveSync from scratch, just for iPhone use. Windows mobile phones work without a hiccup on the same system. Problem happens with either the original iPhones or 3G. And it's totally random for different users. Works fine for a couple days, then stops. The best routine we found to get back up and running is: turn off 3G and wifi. Delete account settings on the iPhone. Re-enter Exchange account info and reboot the phone. This will usually re-sync everything. I'm leaving my phone in this non-3G, non wifi mode, and it seems the most stable. The following things seem to cause it to break for me: opening emails with large attachments, switching to wifi, or just wait long enough and it breaks. Once it's broke, I usually have to do the whole "delete account setting" routine to get it back. I tried reconfiguring our internet-facing front end to use ISA server as is required for Exchange 2007, with delegated kerberos authentication . When ISA server was in place, we had 2 out of 10 iPhones able to function. I had to switch back, because I was getting yelled at We have a line of people at my work asking when this will be fixed. And a bunch of admins running around and trying different settings on their phones. We can't make it an "officially supported" email device until this works.
-
Exchange 2013 ActiveSync not working
Hello everyone,
We seem to be having problems with our ActiveSync not working anymore. Users with mobile devices can not access their mailboxes. We have checked just about every setting and the IIS logs and can't find an answer to this issue. Microsoft's Remote Connectivity
Analyzer shows the following error which we can not find an answer for anywhere.
An ActiveSync session is being attempted with the server.
Errors were encountered while testing the Exchange ActiveSync session.
Test Steps
Attempting to send the OPTIONS command to the server.
Testing of the OPTIONS command failed. For more information, see Additional Details.
Additional Details
A Web exception occurred because an HTTP 400 - BadRequest response was received from IIS7.
Thanks!Hi,
Did you ever find a solution to your problem? I have exactly the same problem with a fresh install of exchange 2013. Can access mailboxes via outlook 2010 and owa but can't connect any mobile device. I'm stumped...
a 400 IIS Bad Request error indicates token bloat. Are you proxying to 2010 mailboxes?
The usual fix is to set the following reg keys on the CAS receiving the requests following the first step described in this article that is similar:
http://support.microsoft.com/kb/2491354
Create the following registry keys on all CAS servers (both Exchange Server 2007 CAS servers and Exchange Server 2010 SP1 CAS servers) in the Active Directory site:
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value data: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value date: 16777216
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
CSS and Exchange Mobile ActiveSync not working
I have a question relating to a CSS and Exchange Mobile devices The customer has 2 Exchange Client Access Servers CAS1 and CAS2 and has problems with ActiveSync on mobile devices. (OWA is working fine) I am trying to test Exchange ActiveSync (using the Microsoft test site https://www.testexchangeconnectivity.com) When I perform an ‘Exchange ActiveSync Autodiscover’ it works fine, but when I use the test ‘Exchange ActiveSync’, it fails Has anyone had this problem before or can suggest a fix please http://mobile.thamesriver.co.uk The config is underneath Any help would be appreciated Kind Regards Tony !*********************** SSL PROXY LIST *********************** ssl-proxy-list TRC_List ssl-server 10 ssl-server 10 vip address x.x.x.x ssl-server 10 cipher rsa-with-rc4-128-md5 x.x.x.x 80 ssl-server 10 rsakey myrsakey ssl-server 10 rsacert myrsacert active !************************** SERVICE ************************** service mobile1 ip address 10.1.230.200 keepalive type tcp protocol tcp port 80 active service mobile2 ip address 10.1.230.201 keepalive type tcp protocol tcp port 80 active service CASservice1_HTTP protocol tcp port 80 keepalive type tcp ip address 10.1.230.200 string cashttp1 active service CASservice2_HTTP protocol tcp port 80 keepalive type tcp ip address 10.1.230.201 string cashttp2 active service CASservice1_EPM protocol tcp port 135 keepalive type tcp ip address 10.1.230.200 string EPM1 active service RPC_Address1 port 59533 keepalive type tcp ip address 10.1.230.200 protocol tcp active service RPC_Address2 port 59533 keepalive type tcp ip address 10.1.230.201 protocol tcp active service RPC_Mailbox1 protocol tcp keepalive type tcp ip address 10.1.230.200 port 59532 active service RPC_Mailbox2 protocol tcp keepalive type tcp ip address 10.1.230.201 port 59532 active service ssl_module1 keepalive type none add ssl-proxy-list TRC_List type ssl-accel slot 3 active !*************************** OWNER *************************** owner TRC content AuthHead add service mobile1 add service mobile2 vip address x.x.x.x protocol tcp port 80 url "//mobile.thamesriver.co.uk/Microsoft-Server-ActiveSync" active content EPM balance aca add service CASservice1_EPM add service CASservice2_EPM protocol tcp port 135 url "/*" vip address x.x.x.x advanced-balance sticky-srcip sticky-inact-timeout 1 active content OWA balance aca add service CASservice1_HTTP add service CASservice2_HTTP protocol tcp port 80 url "/*" vip address x.x.x.x advanced-balance sticky-srcip-dstport active content RPC-Address balance aca add service RPC_Address1 add service RPC_Address2 port 59533 protocol tcp advanced-balance sticky-srcip vip address x.x.x.x active content RPC-Mailbox balance aca add service RPC_Mailbox1 add service RPC_Mailbox2 advanced-balance sticky-srcip vip address x.x.x.x port 59532 protocol tcp active content ssl-rule vip address x.x.x.x protocol tcp port 443 add service ssl_module1 active !*************************** GROUP *************************** group RDP add service TSservice1 add service TSservice2 add service TSservice3 add service TSservice4 add service TSservice5 add service TSservice6 add service TSservice7 vip address 172.26.100.190 active group WWW add service CASservice1_HTTP add service CASservice2_HTTP vip address x.x.x.x active TRC_CSS#
duh!
I'll try that again....
I have a question relating to a CSS and Exchange Mobile devices
The customer has 2 Exchange Client Access Servers CAS1 and CAS2 and has problems with ActiveSync on mobile devices.
OWA is working fine
I am trying to test Exchange ActiveSync (using the Microsoft test site https://www.testexchangeconnectivity.com) I perform an ‘Exchange ActiveSync Autodiscover’ it works fine, but when I use the test ‘Exchange ActiveSync’, it fails
When
Has anyone had this problem before or can suggest a fix please
http://mobile.thamesriver.co.uk config is underneath
The
Any help would be appreciated
Kind Regards Tony
!*********************** SSL PROXY LIST ***********************
ssl-proxy-list TRC_List
ssl-server 10
ssl-server 10 vip address x.x.x.x
ssl-server 10 cipher rsa-with-rc4-128-md5 x.x.x.x 80
ssl-server 10 rsakey myrsakey
ssl-server 10 rsacert myrsacert
active
!************************** SERVICE **************************
service mobile1
ip address 10.1.230.200
keepalive type tcp
protocol tcp
port 80
active
service mobile2
ip address 10.1.230.201
keepalive type tcp
protocol tcp
port 80
active
service CASservice1_HTTP
protocol tcp
port 80
keepalive type tcp
ip address 10.1.230.200
string cashttp1
active
service CASservice2_HTTP
protocol tcp
port 80
keepalive type tcp
ip address 10.1.230.201
string cashttp2
active
service CASservice1_EPM
protocol tcp
port 135
keepalive type tcp
ip address 10.1.230.200
string EPM1
active
service RPC_Address1
port 59533
keepalive type tcp
ip address 10.1.230.200
protocol tcp
active
service RPC_Address2
port 59533
keepalive type tcp
ip address 10.1.230.201
protocol tcp
active
service RPC_Mailbox1
protocol tcp
keepalive type tcp
ip address 10.1.230.200
port 59532
active
service RPC_Mailbox2
protocol tcp
keepalive type tcp
ip address 10.1.230.201
port 59532
active
service ssl_module1
keepalive type none
add ssl-proxy-list TRC_List
type ssl-accel
slot 3
active
!*************************** OWNER ***************************
owner TRC
content AuthHead
add service AuthHead1
add service AuthHead2
vip address x.x.x.x
protocol tcp
port 80
url "//mobile.thamesriver.co.uk/Microsoft-Server-ActiveSync"
active
content EPM
balance aca
add service CASservice1_EPM
add service CASservice2_EPM
protocol tcp
port 135
url "/*"
vip address x.x.x.x
advanced-balance sticky-srcip
sticky-inact-timeout 1
active
content OWA
balance aca
add service CASservice1_HTTP
add service CASservice2_HTTP
protocol tcp
port 80
url "/*"
vip address x.x.x.x
advanced-balance sticky-srcip-dstport
active
content RPC-Address
balance aca
add service RPC_Address1
add service RPC_Address2
port 59533
protocol tcp
advanced-balance sticky-srcip
vip address x.x.x.x
active
content RPC-Mailbox
balance aca
add service RPC_Mailbox1
add service RPC_Mailbox2
advanced-balance sticky-srcip
vip address x.x.x.x
port 59532
protocol tcp
active
content ssl-rule
vip address x.x.x.x
protocol tcp
port 443
add service ssl_module1
active
!*************************** GROUP ***************************
group RDP
add service TSservice1
add service TSservice2
add service TSservice3
add service TSservice4
add service TSservice5
add service TSservice6
add service TSservice7
vip address 172.26.100.190
active
group WWW
add service CASservice1_HTTP
add service CASservice2_HTTP
vip address x.x.x.x
active
TRC_CSS# -
Help? New iPad2 exchange email was working. Now won't download email and existing emails disappearing - newest disappearing first. Can connect to web. And my windows computer connects fine to exchange server. What's going on?
Actually all are affected, but i manage to solved it running Virtual test version to trace the issue and finally able to fix it. Thanks for asking.
IT Technician
Maybe you are looking for
-
Step for creating inbound delivery in case of customer return.
Hi, When I start vl31N I can create with reference to vendor or PO an inbound delivery. How to create inbound delivery with reference to a customer return? What to do? Thank you in advance, Eric van Zundert.
-
Setting ProGuard options in build.xml (SOLVED)
Hi guys, I'm trying to obfuscate my MIDlet so I can use BCrypt and the bouncy castle library. I'm getting the following error and I see that I need to add '-dontskipnonpubliclibraryclasses' and/or '-dontskipnonpubliclibraryclassmembers'. I've read Pr
-
Changing Filenames within a Project
I need to know how to change the File Names within a project. I know how to change them on import and export, but I need to rename my files that are already in a project. How do I do that? Kevin Hawkins
-
Image loading bad performance!!!!
I have a background image on a Jpanel and i have added some buttons on the JPanel. The problem is when I start my application, the buttons are visible about 5 secondes before my background image. So, how can I improve my dowloading performance of my
-
PeopleTools - LDAP (MSAD) integration
I'm tooling around with creating a process to create a shell/disabled Active Directory (AD) account when a new person is hired in the HR database. I've already successfully utilized the LDAP_SEARCH and LDAP_MODIFY business interlinks to read from and