Gmail task list does not pop-out

After installing 3.6.7 gmail task list does not pop out. When I click the pop-out arrow, the task list opens in another tab, not in another stripped down window like it used to. Any ideas?
== URL of affected sites ==
http://

Dear,
Is this quality Plan is back dated and Lot size should be 1 to 9999,999.
Why are you creating rate routing? check lot for 04 insp type in QA02.
Or for old material just create one new order and test it once again.
You can check the statuses in config.
QM>Quality Planning>Inspection Planning>General>Define Task List Status.
You should find that "4" is in there with all the check marks on.
QM--> Quality Inspection --> Inspection Lot Creation --> Maintain Inspection Lot Origins and Assign Inspection Types.
There is a column called status. For each inspection ORIGIN, you can specify the status of the inspection plan. It appears someone in your system changed the 4's to an X and then created the status "X".
Regards,
R.Brahmankar

Similar Messages

PSE 6: Task bar does not pop up in Editor

When I move the cursor to the bottom of the screen in the PSE 6 Editor, the task bar does not open. I have to hit the Windows key to do it.
Work o.k. in the Organizer.
Windows Vista.
Any ideas? - Thanks!
Alexander

Thats a bug that seems to be fixed in PSE 7. But theres a workaround instead of maximizing the Editor, manually resize it to fill the screen except for a strip of a couple of pixels along the bottom. The Editor will remember its last position when you next open it.

In inspection lot..task list does not fetch

Hi QM Guru..
when i do UD for fish material. with QA32....in QA32 showing inspection lot no..but when i select line item of inspection lot and click on inspection lot..one window open..when i go inspection specification for task list..when i click on task list....show the massage....
but i all ready created inspection plan from QP01...i have over ther MIC and sampling procedure also
No inspection plan could be found
Message no. QA278
Diagnosis
A task list could not be found for the selection criteria. The inspection setup for this material in the quality management view of the material master defines an inspection with a task list.
System Response
Sample calculation and inspection lot release are not possible.
Procedure
Check the:
Selection criteria
Material/task list assignment
Task list status
Task list usage
Task list usages i have taken 5 for GR
status 4 general release
kindly suggest me why task is not taking...i have already created task list
kindly suggest me
Regards
Aqueel

Dear,
Is this quality Plan is back dated and Lot size should be 1 to 9999,999.
Why are you creating rate routing? check lot for 04 insp type in QA02.
Or for old material just create one new order and test it once again.
You can check the statuses in config.
QM>Quality Planning>Inspection Planning>General>Define Task List Status.
You should find that "4" is in there with all the check marks on.
QM--> Quality Inspection --> Inspection Lot Creation --> Maintain Inspection Lot Origins and Assign Inspection Types.
There is a column called status. For each inspection ORIGIN, you can specify the status of the inspection plan. It appears someone in your system changed the 4's to an X and then created the status "X".
Regards,
R.Brahmankar

Open Task Button does not come in Outlook

I have a three level approval workflow in which each level an email is generated to the approve to approve or reject.
But suddenly the Open Task Button does not pop up in Outlook 2010 anymore can you tell me why?
Srinivasan Kidambi

had the same issue with External users not using Outlook. This is how I fixed it:
Open the task list that the workflow is using and connect it to Outlook. Then kick off a workflow to make a new task. Once the task is made open the task from Outlook. The bottom options (review, perform the specific req. for the task, and Open this task)
are now links. Hover your mouse over the link and you will see the address.
Now open SPD, connect to your site and open the work flow assc. to the doc lib.
Start editing the workflow and click the "Approval" link
Click "Change the behavior of a single task"
You are going to have to look for all the instances of "then e-mail task notification to "Current Task:Assigned to"
Open "Current Task:Assigned to"
Click where you want he link to go and hit the Hyperlink button
name the link whatever you want, then hit the string builder ("..." button)
Copy the link from the Task in Outlook into the string builder (if you use External addressing you can also hard code the External address).
At the very end of the link where is says ID=(then a number) delete the number and DO NOT put a space. Click the Add or Change Lookup button and use "Current Task: Approval" "ID" "As String" and click ok. Should like this:
Now this will not pop the form up, but it will send the user straight to the task form (might have to enter username and password) for the correct task. Remember to do this to all the "Current Task:Assigned to" in the workflow. It sounds like a chuck of
work but it does not really take thaty long on the OOTB Approval workflow.
Just wanted wanted to add my two cents.
Also check
http://social.technet.microsoft.com/Forums/en-US/417466a3-cdcb-4559-8453-9fff6da4aceb/getting-around-a-missing-open-this-task-button-in-a-nonoutlook-email?forum=sharepointcustomizationprevious
If this helped you resolve your issue, please mark it Answered

User POV does not pop up from Report in task list

Hello,
I've created a report within Related Content in HFM and added it to a task list--the problem I'm experiencing is when I run the report the User POV does not pop up, rather it simply uses the default POV (ie, whatever is set up in data grids or process management)--this happens if I try to run it directly from Related Content or from the task list. My preferences within Financial Reporting have already been updated to 'On' to preview the User POV and if I run the report from Financial Reporting (ie, Explore) the User POV works fine--so, it seems like adding a report to Related Content disables the User POV from popping up. I'm running on Financial Reporting v11.1.2.1 and HFM v11.1.2.1.104.3701. I can't find anything about it within this forum, knowledge base or as a known issue in the ReadMe for the .104 patch set for HFM.
Can anybody fill me in on if this is functionality by design or a defect?
Best regards,
Jason Call

Financial Reports do not work as you might expect when they are used as a related content item. As you already have realized, you will not be able to adjust the FR POV items from inside of HFM.
A 'work around' would be to link to the report and put that link in the Tasklist. This will then open the report 'normally' and you will get the POV functionality that you expect.
To find the link to a report, open the report's properties and look at the 'smartcut' value. (That is a URL directly to the report)

My MacBook Pro is not recognizing my external hard drive. The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data. Is there any way to resolve this?

My MacBook Pro is not recognizing my external hard drive. The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data. Is there any way to resolve this?

WE know Disk Warrior is more reliable, hence more useful, and should be in any disk mechanics toolchest.
For the record, I don't know anything of the kind. I have yet to see evidence that Disk Warrior is useful at all.
What I do know is that you seem to take every opportunity you get to promote it in these forums. Do you work for Alsoft?
Let me be a little more explicit. My opinion is that Disk Warrior is a waste of money if one has backups. If a journaled HFS directory is so badly corrupted that it can't be repaired by Disk Utility, then the volume should be reformatted and restored from backup, which has the same effect as running DW, but is probably faster and doesn't cost $99.

Category drop down list does not show all taskes

Hi, I created a project using product Upgrade Assitant for Release 12. I did not add any customized tasks. I just need to run the default tasks for upgrading 11i to r12. I did the setup following Maintenance Wizard User Guide Release 2 without any problem. But when I try to run the steps, the category drop down list only show one task: Configuration. Where are all other categories? Thanks

Hi, Thank you for the reply. I did successfully finished all the 4 tasks for the configuration category without any errors. I want to continue with other tasks. But the drop down list does not show anything else except Configuration. From the user guide:
Important Notes:
• To view the full list of categories applicable to your installation, you must complete all of the steps in the Configuration category. When you complete these steps, you must refresh the lower left pane of your Web browser. The entire list of categories appears.
What does this mean "you must refresh the lower left pane of your Web browser". I don't see anything to be refreshed. But even after I restarted mw (it must be refreshed now), the category list still now shown.

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes

SocialListNotFound : The Social list does not exist in your personal site.

In SharePoint 2013; when a person try to follow a document which is located the SkyDrive Pro of another person it pop up erros message shows as below.
Something went wrong
Sorry, we couldn't follow the document.
TECHNICAL DETAILS
SocialListNotFound : The Social list does not exist in your personal site.
Can anyone help on this...

Hello all,
I have the exact same issue.
When a user tries to follow some document or site, the same error occurs. When I look at the personal site of the user, the "Social" list is missing.
When I have another user do the same thing, it works! The Social list for that user is there.
The difference between the 2 users:
The user where the issue occurs => mysite has been upgraded from SharePoint 2010
The user where the issue doesn't occur => mysite has been created after the upgrade to SharePoint 2013.
So, I tried to delete the mysite of the user who had the issue and let him recreate it by visiting the MySite host and now it works!
The thing is... I have 100 users having the same issue and a lot of them are actually using their mysite, so deleting those mysites is not really an option.
I have 2 questions:
1. why is that "Social" list not created when mysites are upgraded from SharePoint 2010?
2. Can I trigger some process which fixes this for existing sites?
Thanks,
Bart

Messages window does not pop up when a chat is received

Help!
In the Messages app, when a chat is received, the Messages window does not pop up! (Like it did with the old ichat.) When a chat is received, it makes the noise, the icon bounces in the dock, and a red bubble is on the icon with the number of new chats.... but the messages window does not come forward. This is the most frustrating thing ever! I've been missing so many chats because I'm not staring at my dock. How do I make the messages window pop up when a chat is received?? Please help!!
(I just upgraded from Lion to Mountain Lion...lost ichat, gained the Messages app, and this issue is driving me nuts!)

Hi,
I am not sure you can.
By Default iChat could "Hide" any window such as a Buddy list.
A new Invite put up a Invite window first that you had to Accept (Or set Auto Accept).
This triggered the appearance of the Chat window.
This does not happen in Messages.
There is not Invite window now to any Form of Text chat invite.
As a consequence there is no Trigger for the Chat window.
Add to that the Messages main Window is an interface window as well as the Chat window.
This puts it in the same category as Buddy List which has to be called back (unhidden) into view with either Keystrokes or the Window Menu.
A click (or possibly two to first bring Messages to the Front) on the DOCK icon also tends to reveal the Messages window.
You can set the Messages > Preferences > Alerts for New Messages and Text Chat invitation to Bounce the DOCK and Play sounds to help.
10:48 PM Saturday; April 20, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

TS3297 my itunes wish list does not have a purchase allbutton why not it did before

My itunes wish list does not have a purchase all button anymore why not?

You don't think we've all done that?.............numerous times!
Ever since this change came out I sent feedback the very next day and several times since.
We've had iTunes updates since and Apple just doesn't seem to think it's a big deal.
Why would they get rid of it to begin with?
I don't purchase a can of beans, one bean at a time.

Cannot forward email message. Contact list does not appear to select. Can reply to sender only

When trying to forward an email message, the contact list does not appear. It can
only be forwarded by entering addresses manually. I can return an email by replying
but I cannot forward under the Mozilla Fox server.
When I am in Internet Explorer I can utilize the email forward without a problem.
Contacted AT & T to see if it was their problem, since I use att.net.
The technician stated it was a problem with Mozilla because it was not compatible
with the AT & T net work. It could possibly be in recent updates, since I just
discovered the problem within the last week.
Would prefer to enter my email through Mozilla Fox. So can you solve this problem
for me.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

SMS list does not appear correctly.

The SMS list does not appear draft messages correctly for one of my enterprise user. But the draft messages are appearing correctly when viewed from the master message list which used for all messages.
I have wiped out the handheld & restored the backup, but the problematic draft messages has gone missing now & everything works fine.
If any body has similar issues or have found out some alternates are most welcome to post the resolution.

Hi,
The same issue has reoccurred today for the same device and the scroll gets locked exactly at a old message date i.e. 6th-Aug-11 & does not go up to see the latest messages. Normally it happens while deleting a message & gets stuck.
I have backed up the SMS section via BB Desktop software & restored back. This has resolved the issue as of now, but certainly looking for a permanent solution & the root cause.

App list does not appear. Why does it take longer?

App list does not appear. Why does it take longer?

Hi smilekick,
Are you using Windows or Mac? Are you on a managed network. If no Try signing out and signing in of CC desktop. If still the same issue remove CC desktop, run the cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html and try installing again.
Create a new user account and check whether the same issue persists.
Regards,
Romit Sinha

List Does not Exist (only on mac)

So I've tried trouble shooting this through any permissions and I've narrowed it down to one thing. Mac... I've tested (internally) creating events and creating tasks and what not on a PC and it works fine for the user. I have then tested the same user
on multiple macs and have not been able to create tasks and calendars I keep getting this error message "List does not exist. The page you selected contains
a list that does not exist. It may have been deleted by another user." But the only "solution" I've seen has been links to this blog... http://blogs.msdn.com/b/opal/archive/2010/11/13/sharepoint-2010-on-a-mac-with-office-for-mac-2011.aspx which...
*spoiler alert* doesn't solve anything, it merely states the features you can and cannot do on a mac. So I'm open to suggestions. Also I've tested in Chrome and Safari and the same issue happens.

Since no one answered this and I found the issue I will post it here. First, when trying to login to the <server name>:<port number>/<site name> it wasn't working for macs. I opened the port number on my modem/router and it started working.
The issue where you get the list does not exist is when you use the server's internal IP address. It goes to the site like normal but for whatever reason doesn't let you use it properly. So to reiterate make sure you have opened the port that your connecting
your sharepoint site to, and make sure your using the actual name of the server not its IP address.

Gmail task list does not pop-out

Similar Messages

Maybe you are looking for