GMS2: Sync errors after restarting datasync-connectors

System: SLES11SP3 fresh install, GMS 2.0.0 Build 429
Groupwise 2012sp2
GMS is working fine till restarting the connectors in a ssh shell or restarting the whole GMS service (rcgms restart)
after that, mail without attachment are working fine but mails with an attachment don't sync anymore.
After restarting the Host all mails are syncing fine.
the error I get after I restart the connectors when gms get an mail with attachment in the groupwise-connector is:
groupwise-agent.log
2013-12-23 13:16:52.182 INFO [POPULATE_WORKER_Thread-8] [engine:955] [userID:userid.po.domain] [eventID:] [objectID:] [CheckPoint] Created Consumer Event: 1b00127f6bcc11e3adf100505687290d
2013-12-23 13:16:52.188 INFO [POPULATE_WORKER_Thread-8] [AppInterface:1525] [userID:] [eventID:] [objectID:] [CheckPoint] Sent event to engine: 52B3AEC9.UNILINZ.ZID.100.1363032.1.177292.1
2013-12-23 13:16:52.292 ERROR [POPULATE_WORKER_Thread-8] [gwconnectorlogic:1414] [userID:userid] [eventID:] [objectID:] [ItemHandler] An unexpected error occurred while trying to handle the item: 52B3F402.domain.po.100.1363032.1.177...:7.doma in.po.100.0.1.0.1@16 : <urlopen error Tunnel connection failed: 403 Forbidden>
2013-12-23 13:16:52.294 ERROR [POPULATE_WORKER_Thread-8] [util:253] [userID:] [eventID:] [objectID:] [] EXCEPTION: ********************
2013-12-23 13:16:52.294 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: Traceback (most recent call last):
2013-12-23 13:16:52.294 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: File "./groupwise/lib/gwconnectorlogic.py", line 1227, in itemHandler
2013-12-23 13:16:52.295 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: File "./groupwise/lib/gwconnectorlogic.py", line 1600, in processItemAttachments
2013-12-23 13:16:52.295 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: File "./groupwise/lib/gwconnectorlogic.py", line 1709, in downloadAttachment
2013-12-23 13:16:52.295 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: File "/usr/lib64/python2.6/urllib2.py", line 126, in urlopen
2013-12-23 13:16:52.295 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: return _opener.open(url, data, timeout)
2013-12-23 13:16:52.296 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: File "/usr/lib64/python2.6/urllib2.py", line 391, in open
2013-12-23 13:16:52.296 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: response = self._open(req, data)
2013-12-23 13:16:52.296 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: File "/usr/lib64/python2.6/urllib2.py", line 409, in _open
2013-12-23 13:16:52.296 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: '_open', req)
2013-12-23 13:16:52.297 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: File "/usr/lib64/python2.6/urllib2.py", line 369, in _call_chain
2013-12-23 13:16:52.297 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: result = func(*args)
2013-12-23 13:16:52.297 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: File "/usr/lib64/python2.6/urllib2.py", line 1194, in https_open
2013-12-23 13:16:52.297 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: return self.do_open(httplib.HTTPSConnection, req)
2013-12-23 13:16:52.297 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: File "/usr/lib64/python2.6/urllib2.py", line 1161, in do_open
2013-12-23 13:16:52.298 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: raise URLError(err)
2013-12-23 13:16:52.298 ERROR [POPULATE_WORKER_Thread-8] [util:256] [userID:] [eventID:] [objectID:] [] EXCEPTION: URLError: <urlopen error Tunnel connection failed: 403 Forbidden>
2013-12-23 13:16:52.298 ERROR [POPULATE_WORKER_Thread-8] [util:257] [userID:] [eventID:] [objectID:] [] EXCEPTION: ********************
restarting the postgresql doesn't help,
a fresh installation of the gms neither
when restarting the connectors in the gui the problem doesn't occur
any ideas?
thanks
claus
I already tried a fresh installation

Hi, Claus
Sorry for warming up an old thread.
How did you reinstall SLES?
May be you changed some network parameters?
I have same issue here. After rebuild of gms database the logs are full of errors, timeouts and invalid keys.
Go

Similar Messages

File sync error after renaming jpg file on desktop

I changed the file name of a photo in my desktop backup of my Treo 755p photos from the default format of Photo_[date]_xyz.jpg to Matisse by fire2_101208.jpg.
The path is:
C:\Program Files\Palm\[username]\Photos\offline copy location\7dba\Palm on Card\Matisse by fire2_101208.jpg
Now I get the following error after hotsync.
Unable to sync media file 'Matisse by fire2_101208.jpg' on desktop. Error code: 32.
OK Media with 1 message(s)
I also changed two others to
Matisse by fire1_101208.jpg and
Matisse by fire3_101208.jpg
but am not getting errors on those.
I can open the file specified so I don't think it is corrupted.
I'm using Hotsync 6.0.1.
I could not find error 32 anywhere. Is ther a list of all the Hotsync errors somewhere?
Any ideas?
Thanks,
Don
Post relates to: Treo 755p (Sprint)
Post relates to: Treo 755p (Sprint)

as far as i understood the explanation, you renamed the picture manually by going into the path that you stated in your post right?
when your rename the file, have you check if it did show the file extensions?
try to reveal the file extensions by going back to the location (folder). click on tools>folder options>view>uncheck hide extensions for known file types.
then click ok. try to see on what's the difference in the 3 files you mentioned. i suspect that the erring file has 2 jpeg extensions on it.
Post relates to: Treo 680 (Unlocked GSM)

TS4170 Same error after restart

I'm currently getting the above error, after removing the cables and doing the 2 finger restart on the apple remote, I'm still getting the same error message:
Netflix is currently unavailable, try again later
Anyone know how to resolve this?
Thanks

UPGRADE/POSTP: START OF PHASE CHK_POSTUP
Errors occurred during the upgrade that require revision:
It is strongly recommended to solve those problems before
starting the productive operation of your SAP system !!
Please consult the following file for detailed information:
D:\usr\sap\PUT\log\LONGPOST.LOG
You might find it helpful to use the message class and the
message number as a search index for obtaining relevant notes
from the SAP Service Marketplace (e.g. search for keyword 'TG123').
phase names and number of problems that occurred in this phase:
                  XPRAS_UPG      1
And in log file
UPGRADEPHASE XPRAS_UPG
1PEPU203X> Messages extracted from log file "SAPR700ZF1.DEV" <
A4PECOM_PRODUCT 063 Execute the upgrade report "COM_PRODUCT_UPGRADE"
Executed Report but still not able to execute this phase
Cheers
Murali

Syncing Error after upgrading to iOS4

After my 3GS backs up for what seems like forever, I get "Syncing Error (-50). It seems to sync everything correctly except for my photographs. Nothing appears except "Camera Roll". I've had my iphone for a year and never had any issues until the iOS4

Delete the photo cache as described here:
http://support.apple.com/kb/TS1314

GX Error - after - Install Web Connector Plugin for iWS

After custom installation from web connector plugin in iWS, the
browser shows
GX Error
socket result code missing !!!
Is seems the plugin can't call the remote web application.
I see a establised connection between the web server and die application
server port 10818 (Exec Proc)
and to the LDAP server port 50505.
If I connect directly the web server installed lokaly the appilkation runs
(fortune).
Any idee ?
Sven Kirsten

Okay, lets say more about the scenario:
server1 server2
|---------------- ---------------------------
| iWeb Server | | iApplication Server (Exec
Port 10818) |
| with plugin |---------------------|LDAP Server (Port 50505)
|
|---------------| | iWeb Server with Plugin
|
If I go to server 2:
http://server2/NASApp/fortune/fortune
fortune runs
If I go to server1
http://server1/NASApp/fortune/fortune
I got the message on the browser
GX Error
socket result code missing !!!
Thats meens, the application servers runs fine.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If I run from server 1:
In the kxs_0_CCS0 log on the server2 I find the following:
[04/Okt/2001 10:57:25:7] info: NSAPICLI-012: plugin reqstart, tickct:
1002185845s 794005us
[04/Okt/2001 10:57:25:7] warning: UTIL-013: GXGUID: NameTrans lookup failed
(Applogic Servlet fortune_fortune)
[04/Okt/2001 10:57:25:7] warning: NSAPICLI-011: socket result code
missing!!!
[04/Okt/2001 10:57:25:7] info: NSAPICLI-009: plugin reqexit: 0s 1828us
In the kjs_1_CCS0 log on server 2 I find the following.
[02/Okt/2001 17:30:18:1] error: Exception: SERVLET-execution_failed: Error
in executing servlet JSPRunner: java.lang.NullPointer
Exception
Exception Stack Trace:
java.lang.NullPointerException
at com.netscape.server.servlet.jsp.JSPRunner.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Compiled Code)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Compiled
Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If I run from server 2:
In the kxs_0_CCS0 log on the server2 I find the following:
[04/Okt/2001 11:08:58:1] info: NSAPICLI-012: plugin reqstart, tickct:
1002186538s 187717us
[04/Okt/2001 11:08:58:3] info: NSAPICLI-009: plugin reqexit: 0s 113269us
In the kjs_1_CCS0 log on server 2 I find the following.
[04/Okt/2001 11:05:55:8] info: --------------------------------------
[04/Okt/2001 11:05:55:8] info: FortuneServlet: init
[04/Okt/2001 11:05:55:8] info: --------------------------------------
[04/Okt/2001 11:05:56:0] info: --------------------------------------
[04/Okt/2001 11:05:56:0] info: jsp.APPS.fortune.fortune: init
[04/Okt/2001 11:05:56:0] info: --------------------------------------
++++++++++++++++++
In the error case there is a NameTrans Lookup failure for the web
application.
The naming service from the application server can't locate the fortune
application.
I hope it helps you the locate more detailed the problem.
Thanks,
Sven K
"Sven Kirsten" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
After custom installation from web connector plugin in iWS, the
browser shows
GX Error
socket result code missing !!!
Is seems the plugin can't call the remote web application.
I see a establised connection between the web server and die application
server port 10818 (Exec Proc)
and to the LDAP server port 50505.
If I connect directly the web server installed lokaly the appilkation runs
(fortune).
Any idee ?
Sven Kirsten

Win7 Offline Files sync error after upgrade to Lion Server 10.7.2

Symptom: client is a Win7 laptop, the server is Mac OS X 10.7.3 Lion Server with SMB and AFP shares. Win7 Offline Files stopped working after I upgraded Snow Leopard (non-server version) to Lion Server 10.7.2. After updating to 10.7.3, the problem persists. When syncing, it gives thounsands of error like this: The process cannot access the file because it is being used by another process. WinXP clients are fine with the Offline Files function though.
I Googled and studied online for several days now and it might be related to the "Oppurtunistic Locking", or "Oplocks" for short, in the SMB protocol. Since Apple has re-written Samba, there's no "smb.conf" anymore to change the Oplocks setting. Maybe it's possible to change the setting in "com.apple.smb.server.plist"?
From the Internet:
1. Oplocks should be DISABLED on the server if there is any other file sharing protocol (AFP, etc.) other than SMB.
2. Offline Files will NOT work properly if Oplocks is disabled on the server side.
3. It was possible to config oplocks setting in smb.conf in Mac OS X versions prior to Lion but now there's no such config file.
My Question:
1. Does anyone else have similar problems?
2. Is it related to the Oppurtunistic Locking thing?
3. Is Oppurtunistic Locking enabled or disabled in Lion Server by default?
4. If it's related to Oplocks, how can I change the setting on the server?
5. I've noticed that the authentication from Windows PCs to the SMB share on the Lion Server is much slower then in SL. Could this somehow be related to my problem?
Thanks for your time! :-D

Any luck getting the info on SMBX parameters like OPLOCKS ? This is apparently causing an issue with Autodesk Revit. I am resorting to installing SMBUP.
There is an article that describes this method for altering the Lion smbd configuration parameters for honoring ACLs:
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.smb.server AclsEnabled -bool NO
from this article
http://support.apple.com/kb/TS4149
and this:
http://www.stanford.edu/group/macosxsig/blog/2011/08/enable-logging-with-107-smb x-w.html

Sync error after update to 3.1

After updating to 3.1, I am now receiving the following error.
The iphone .... cannot be synced
An unknown error occurred (-39)
Any ideas?

Ok, I messed around with it a bit and ended up having to do a complete restore of my iPod touch and that fixed all the issues.

IPod Sync Error after Upgrading to iTunes 10 and ios5

Some help please,
I've upgraded to iTunes 10 and installed ios5 on to my iPod Touch and I cant now sync as iTunes reports that the backup is corrupted or not compatable with the iPod
Thanks
Kris

Dear Mr. Sawyer,
To my surprise, the version is shown as 10.0.1.22. I will uninstall itunes and try loading the same again. After uninstalling do we need to delete any registry entries for Windows XP.
Thanks for your response and concern.
Regards
Amit Samel

FIM Sync service keeps restarting after being disabled

Hi - We are deploying the SharePoint User Profile Store connector and I have followed all the steps here:
http://technet.microsoft.com/en-us/library/dn511003(v=ws.10).aspx
However the FIM Sync service keeps enabling and restarting itself - can't see anything in the event logs except a Evt ID: 2001 - Service was started successfully
What is starting this service? How can I stop so that it remains in the disabled state?
Thanks
J

Hi,
Based on your description, my understanding is that you want to disable the FIM Sync service, but FIM Sync service keeps restarting after being disabled.
I suggest you start the FIM Sync service again and stop it, then disable it.
You shouldn't need to start those services manually - SharePoint will do everything itself when you start the User Profile Sync service in Central Administration.
Restarted the User Profile Synchronization Service in Central Administration.(Central Administration -> System Settings -> Manage services on server -> User Profile Synchronization Service.)
Stop the FIM Sync service and then disable it.
Here are two links, you can use as a reference:
http://serverfault.com/questions/147738/not-able-to-start-forefront-identity-manager-service
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This hass been going on for several months, and Apple has never contacted

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.

My kids ipod nano 5th gen does not sync to music and gets error 13019 message. So far done all the suggestions - and now it has NO music. It seems to download all the music and then error after the last song.

Kids ipod gets the 13019 error after trying to sync. I have done all the suggestions online and now it has no music and will not sync.
It seems to download all the music and on the last song clicks out and says unknown error.
any other suggestions?
Kid is mad now there is NO music on the ipod. At least before it had the old music and just would not download new songs.
All worked on our iphones, and other ipods. Just hers is wacked.
thanks

I've encountered the same problem as this recently, but unfortunately i haven't worked out how to fix it yet.
I tried to fit too many songs on my ipod nano from itunes, and it told me it would create a selection of these (titled my songs) and put them on the nano, which it did. I then went back onto itunes to delete some songs so that they would all fit on the nano. I also deleted the "my songs" playlist, knowing that all the songs were still stored under Music on itunes. When i tried to sync the nano it said that it couldn't be synced as the required disk cannot be found.
HELP, PLEASE!

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Data pump error ORA-39065, status undefined after restart

Hi members,
The data pump full import job hung, continue client also hung, all of a sudden the window exited.
;;; Import> status
;;; Import> help
;;; Import> status
;;; Import> continue_client
ORA-39065: unexpected master process exception in RECEIVE
ORA-39078: unable to dequeue message for agent MCP from queue "KUPC$C_1_20090923181336"
Job "SYSTEM"."SYS_IMPORT_FULL_01" stopped due to fatal error at 18:48:03
I increased the shared_pool to 100M and then restarted the job with attach=jobname. After restarting, I have queried the status and found that everything is undefined. It still says undefined now and the last log message says that it has been reopened. Thats the end of the log file and nothing else is being recorded. I am not sure what is happening now. Any ideas will be appreciated. This is 10.2.0.3 version on windows. Thanks ...
Job SYS_IMPORT_FULL_01 has been reopened at Wednesday, 23 September, 2009 18:54
Import> status
Job: SYS_IMPORT_FULL_01
Operation: IMPORT
Mode: FULL
State: IDLING
Bytes Processed: 3,139,231,552
Percent Done: 33
Current Parallelism: 8
Job Error Count: 0
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest%u.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest01.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest02.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest03.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest04.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest05.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest06.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest07.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest08.dmp
Worker 1 Status:
State: UNDEFINED
Worker 2 Status:
State: UNDEFINED
Object Schema: trm
Object Name: EVENT_DOCUMENT
Object Type: DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Completed Objects: 1
Completed Rows: 78,026
Completed Bytes: 4,752,331,264
Percent Done: 100
Worker Parallelism: 1
Worker 3 Status:
State: UNDEFINED
Worker 4 Status:
State: UNDEFINED
Worker 5 Status:
State: UNDEFINED
Worker 6 Status:
State: UNDEFINED
Worker 7 Status:
State: UNDEFINED
Worker 8 Status:
State: UNDEFINED

39065, 00000, "unexpected master process exception in %s"
// *Cause: An unhandled exception was detected internally within the master
// control process for the Data Pump job. This is an internal error.
// messages will detail the problems.
// *Action: If problem persists, contact Oracle Customer Support.

How avoid "AUD: OS Errors" after server restart

Hi,
After restart my windows 2003 i'm receiving the next messages in my Oracle 11g R2 Standard Edition Be one alert.log file:
AUD: OS Error = 31 encountered while writing audit record
AUD: OS Error = 5 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
Someone could tell me how I can avoid these messages?
Many thanks in advance.

Hi schavali,
The OS version is Microsoft Windows 2003 Standard Edition.
Initially audit_trail value was 'DB' and i was receiving the next messages in my Oracle 11g R2 Standard Edition Be one alert.log file:
AUD: OS Error = 31 encountered while writing audit record
AUD: OS Error = 5 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
Following the oradba suggestions i changed audit_trail value from 'DB' to 'OS', but i continued receiving similar messages in the alert.log:
AUD: OS Error = 31 encountered while writing audit record
AUD: OS Error = 31 encountered while writing audit record
AUD: OS Error = 5 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
What do you thinking about? How i can avoid this error messages?
Many thanks in advance.

Error icon shown after restarting

I have upgraded my Mac Mini from Mavericks to Yosemite, the installation ran fine and the system started up into Yosemite without issues. However after restarting my machine, a white screen with an Apple logo appears with a progress bar below it, the progress bar will go up to about 35% and then show an error icon.
How can I fix this? Unfortunately I did not make a backup of the OS nor do I use Time Machine.
What are my options? Is there a way I can read through the logs to see what is failing to possibly try and fix it?

Try actually opening message and clicking reply icon to respond rather than right clicking on message preview. I have had same bug (which Apple should fix all the same), but have found that if you open the message as its own discreet window, then the "replied to" icon will appear. Hope this is helpful

GMS2: Sync errors after restarting datasync-connectors

Similar Messages

Maybe you are looking for