Gneral:system error message appears when I try to ...

when try to open any music songs I put in N95 8g even that songs come with N95 8g this message appear >>gneral:system error
what I can do??

Hi tito_6646,
Just saw this thread. You can try to perform a restore to factory default (I believe this is what lupos0_1 meant), which should be available under the Menu, Tools, Settings, Phone, General, Orig. phone settings.
If this doesn't help, you can try and format your N95 8GB. This can be done via the following steps:
1. Off your N95 8GB.
2. Press the buttons *, 3 and the call.
3. While holding the above buttons, power on your N95 8GB.
4. Do not release the buttons until you see the message "Formatting". (Note that I own a N80, which doesn't prompt me this message, though I read that it does on N95 8GB.)
WARNING: This method will wipe out your data and applications on your N95 8GB, so do backup your data and be prepared to reinstall your applications.
Hope this helps. Let us know.
To All: Can anyone advise if the internal 8GB will be wiped out via the Format/Hard-reset operation? In addition, anyone know on how to backup the activiation code for the Spiderman 3 movie?
Cheers.

Similar Messages

  • The following error message appears when I try to create a PDF in Publisher:

    The following error message appears when I try to create a PDF in Publisher:
    PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-install Adobe Acrobat 10.1.
    I have tried update patches to no avail.
    Can anyone please help?
    Thank you.
    Susan

    Hello Michael,
    My version of Publisher is 2010 and my OS is Windows 8.1.
    64-bit OS x64 based processor.
    I'm not too sure if this issue has arrisen when I upraded to Windows 8.1.
    My Dell printer(Dell all in one) has also stopped working due to a driver issue now not being supported.
    Thank you for taking the time to view my request.
    Kind regards,
    Susan

  • Internal Error message appears when I try to open Acrobat pro XI

    I recently installed Acrobat pro XI on my MacBook Air running mavericks. It installs fine, but when I try to launch it I receive an 'Internal Error occurred' message. How do I resolve this?
    I have uninstlled and reinstalled from my disk, and even downloaded and installed from the Adobe site. All versions install OK, but when I try to launch it I receive this very frustrating Internal error message... How do I resolve this?

    Hi garnetg,
    Please check the performance in the root user account and check.
    Enabling and using the "root" user in Mac OS X
    Regards,
    Rave

  • An unknown error message appears when I try to update an app from the app store

    Beginning about a week ago, I get the message "an unknown error occurred" when I try to update an app from the app store on my iPhone 4s. The same update works fine on my iPad 2.  Resetting does not solve the problem.

    try updating on your PC with itunes, then sync your phone to your pc.

  • An error message appears when i try to sing in on my icloud controlpanel

    when i'm trying to log on my ICloud controlpanel this message appears:you can not log on because of a server error
    Translation of the red font:You can not log on because of a server error

    What iOS version are you currently running?
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT4759 "You can't sign in because of a server error" message appears when I try log in.  I am typing the correct apple id and password.  What do I do?

    This message appeared even after I downloaded the latest version of iCloud.  I am logging from a PC (Windows 8).

    Hi spillgar,
    If you are having issues signing in to iCloud from your Windows machine, you may find the following articles helpful:
    iCloud: Account troubleshooting
    http://support.apple.com/kb/ts3988
    iCloud: If you can’t sign in to iCloud.com
    http://support.apple.com/kb/ph2611
    Regards,
    - Brenden

  • Error message appears when I try to download from itunes.

    It says, "Thier was an error downloading your purchased music. An unknown error has occured(-50).
    Someone help!

    Hello Bptripp,
    Welcome to Apple Discussions.
    Have a look at this article:
    iTunes for Windows: An unknown error occured (-50) - There was an error in the Music Store
    Gary

  • An unknown error has occurred message appears when i try to login to the app store

    an unknown error has occurred message appears when i try to login to the app store

    MacBook Pro (Mid/Late 2007 or newer) is required. You've not indicated which one you have. If yours is one of these, then http://www.apple.com/support/mac/app-store/contact/
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • "The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?

    The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?

    Dear Lawrence Finch: 
    If you're still around I hope you see this message, as you're the FIRST person (after reading every link, thread, other sites, apple support articles, etc.) to mention JB may be causing this iTunes popup window to REPEATEDLY occur:
    "The iPhone software update server could not be contacted."
    No, I did not hack anything (are you kidding?  Grannies don't hack!), but I unknowingly bought a 3Gs iOS 3.1 from ebay that was not advertised as JB.  Since it is like brand new, I was going to keep it (because my old backup is iOS 3.1.2) & was trying to simply restore & update, which (I thought) would remove the JB (that's what everybody says at forums, etc).
    Instead, after "erasing all settings/content" (inside phone's Settings to get the prior person's name out of there), it is now stuck in White Apple Mode.
    Put it in DFU/Recovery Mode & connect to iTunes but that stupid above message keeps appearing & I have already read/tried EVERYTHING to get rid of that message, starting with: 
    1.  OLD phones (3Gs) with OLD iOS 3.1+ should work FINE with OLD Mac (iBook) with OLD OSX (Tiger 10.4.11) with OLD iTunes (9.2.1[5]).  So that can't be the problem.
    Here's all the other things apple & others say to check which I already checked:
    2.  USB ports are FINE, both work FINE, so that's not the problem.
    3.  No "extra USB devices" are connected, ONLY a mouse, & then the phone (yes, I tried it w/o the mouse connected but that didn't help).
    4.  No "usb hubs."
    5.  Latest iTunes for this OSX has already been DL'd (iTunes 9.2.1[5]).  If you know of a newer one for this OSX, please advise.
    6.  No antivirus software.
    7.  No security software.
    8.  No routers; only 1 comcast modem, period.  Wired Ethernet.
    9.  No wifi gadgets, no wifi at all.
    10.  No firewalls, except what is on iBook in the SHARING/System-Prefs. section.  It's turned OFF.
    11.  Did the hosts/terminal thing sudo nano whatever it was.  There were only 3 lines, NO gs.apple.com:
    xxxxx local host
    xxxxx broadcast host
    xxxx local host
    Oh, & btw, ATT officially unlocked this phone (after I filled out their online forms) but I can't finish the process via iTunes to get their Confirmation that "Device is Now Unlocked," so I can use T-Mo.
    So that's it.  If you have any other ideas of what to do from here, since from your comment, maybe it's the stupid JB on this phone that is causing the problem (???), please advise.
    Many thanks!

  • I am getting an error message -42110 when I try to download anything from Itunes on my new MacBook Pro

    I am getting an error message -42110 when I try to download anything from Itunes Store on my new MacBook Pro.

    Maybe a more appropriate place to post
    iTunes
    And if you want to discuss your MBP:
    MacBook Pro

  • I am getting an error message -41 when I try to send my project to IDVD

    I am getting and error message - 41 when i try to send my video project to IDVD. Does anyone know what i have to fix?

    Hi
    The Error -41   mFulErr  Memory full (open) or file won't fit (load) - means that memory is full
    Memory can be more than one thing
    • RAM - usually is enough and rarely give this error
    • Start-Up Hard disk - is TO FULL - very common origin to this signal
    • Other hard disks - Usually do not have any thing to do to this
    So first idea is - HOW Much free space is there on Your Start-Up (Mac OS) hard disk
    My minimum is 25Gb free space and especially if iDVD is to be used.
    This space is needed by iDVD and Mac OS temp. files and can not be addressed elswhere. Has to be here.
    Secondly - I never in any version of iMovie use - Share to iDVD - BUT I - Share to Media Browser and as Large (not HD) this I import in iDVD and result are so much better.
    Yours Bengt W

  • After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  I cannot now access iTunes.  How can I resolve

    After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  So, now after the upgrade, I cannot access iTunes.  How do I resolve this??
    Thanks

    zepel has it, but perhaps some more detail will help.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Error message appears when trying to start server in VM Manager

    Error message appears when trying to start server in VM Manager
    OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
    When trying to restart server:
    OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

    Hey SDGardella,
    Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error 499"
    This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
    Thanks,
    Matt M.

  • I have a problem to open my Number Program. this message appear when i try to open"The last time you opened Numbers, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again" I would be thankful if you could help me?

    I have a problem to open my Number Program. this message appear when i try to open"The last time you opened Numbers, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again" then I tried to open it but nothing happened.... I would be thankful if you could help me..
    Process:         Numbers [1021]
    Path:            /Applications/Numbers.app/Contents/MacOS/Numbers
    Identifier:      com.apple.iWork.Numbers
    Version:         3.0 (1470)
    Date/Time:       2014-06-27 16:13:23.405 +0100
    OS Version:      Mac OS X 10.9.3 (13D65)
    Report Version:  11
    Anonymous UUID:  243D9264-54B7-E9AE-2F83-D11098965D14

    I have a problem to open my Number Program. this message appear when i try to open"The last time you opened Numbers, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again" then I tried to open it but nothing happened.... I would be thankful if you could help me..
    Process:         Numbers [1021]
    Path:            /Applications/Numbers.app/Contents/MacOS/Numbers
    Identifier:      com.apple.iWork.Numbers
    Version:         3.0 (1470)
    Date/Time:       2014-06-27 16:13:23.405 +0100
    OS Version:      Mac OS X 10.9.3 (13D65)
    Report Version:  11
    Anonymous UUID:  243D9264-54B7-E9AE-2F83-D11098965D14

  • HT201413 I keep getting error message (26) when I try to restore my iPod touch 3G

    I keep getting error message (26) when I try to restore my iPod touch 3G

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Maybe you are looking for