Gnome3 not work with ATI HD6950 Card?

Hey all..
I'm just installed the ALL drivers from the testing, and its the versions:
xf86-video-ati-6.14.2-1
mesa-7.10.99.git20110612-1
libdrm-2.4.25-1
And ofc, i'm using with last kernel 2.26.39.
So what's the problem with that? Why i can't running this Gnome3?
This is the my logs:
.xsession-errors:
/etc/gdm/Xsession: Beginning session setup...
/etc/gdm/Xsession: Setup done, will execute: gnome-session
Unknown chipset 0x6719
gnome-session-is-accelerated: No hardware 3D support.
gnome-session-check-accelerated: Helper exited with code 256
gnome-session[1181]: WARNING: Session 'gnome' runnable check failed: Exited with code 1
gnome-session[1181]: WARNING: Unable to find default provider 'notification-daemon' of required provider 'notifications'
Xorg.0.log:
[ 151.157]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 151.157] X Protocol Version 11, Revision 0
[ 151.157] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 151.157] Current Operating System: Linux yakir-arch 2.6.39-ARCH #1 SMP PREEMPT Mon Jun 6 22:37:55 CEST 2011 x86_64
[ 151.157] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
[ 151.157] Build Date: 30 May 2011 08:18:15AM
[ 151.157]
[ 151.157] Current version of pixman: 0.22.0
[ 151.157] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 151.157] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 151.157] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 16 11:52:13 2011
[ 151.157] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 151.157] (==) No Layout section. Using the first Screen section.
[ 151.157] (==) No screen section available. Using defaults.
[ 151.157] (**) |-->Screen "Default Screen Section" (0)
[ 151.157] (**) | |-->Monitor "<default monitor>"
[ 151.157] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 151.157] (**) | |-->Device "r"
[ 151.157] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 151.157] (==) Automatically adding devices
[ 151.157] (==) Automatically enabling devices
[ 151.157] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 151.157] Entry deleted from font path.
[ 151.157] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 151.157] Entry deleted from font path.
[ 151.157] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 151.157] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 151.157] Entry deleted from font path.
[ 151.157] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 151.157] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 151.157] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 151.157] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 151.157] (II) Loader magic: 0x7d3440
[ 151.157] (II) Module ABI versions:
[ 151.157] X.Org ANSI C Emulation: 0.4
[ 151.157] X.Org Video Driver: 10.0
[ 151.157] X.Org XInput driver : 12.2
[ 151.157] X.Org Server Extension : 5.0
[ 151.158] (--) PCI:*(0:1:0:0) 1002:6719:1002:0b00 rev 0, Mem @ 0xc0000000/268435456, 0xfe620000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 151.158] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 151.158] (II) "extmod" will be loaded by default.
[ 151.158] (II) "dbe" will be loaded by default.
[ 151.158] (II) "glx" will be loaded by default.
[ 151.158] (II) "record" will be loaded by default.
[ 151.158] (II) "dri" will be loaded by default.
[ 151.158] (II) "dri2" will be loaded by default.
[ 151.158] (II) LoadModule: "extmod"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 151.158] (II) Module extmod: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.0.0
[ 151.158] Module class: X.Org Server Extension
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (II) Loading extension MIT-SCREEN-SAVER
[ 151.158] (II) Loading extension XFree86-VidModeExtension
[ 151.158] (II) Loading extension XFree86-DGA
[ 151.158] (II) Loading extension DPMS
[ 151.158] (II) Loading extension XVideo
[ 151.158] (II) Loading extension XVideo-MotionCompensation
[ 151.158] (II) Loading extension X-Resource
[ 151.158] (II) LoadModule: "dbe"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 151.158] (II) Module dbe: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.0.0
[ 151.158] Module class: X.Org Server Extension
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (II) Loading extension DOUBLE-BUFFER
[ 151.158] (II) LoadModule: "glx"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 151.158] (II) Module glx: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.0.0
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (==) AIGLX enabled
[ 151.158] (II) Loading extension GLX
[ 151.158] (II) LoadModule: "record"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 151.158] (II) Module record: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.13.0
[ 151.158] Module class: X.Org Server Extension
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (II) Loading extension RECORD
[ 151.158] (II) LoadModule: "dri"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 151.158] (II) Module dri: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.0.0
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (II) Loading extension XFree86-DRI
[ 151.158] (II) LoadModule: "dri2"
[ 151.158] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 151.158] (II) Module dri2: vendor="X.Org Foundation"
[ 151.158] compiled for 1.10.2, module version = 1.2.0
[ 151.158] ABI class: X.Org Server Extension, version 5.0
[ 151.158] (II) Loading extension DRI2
[ 151.158] (II) LoadModule: "radeon"
[ 151.159] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 151.159] (II) Module radeon: vendor="X.Org Foundation"
[ 151.159] compiled for 1.10.1, module version = 6.14.2
[ 151.159] Module class: X.Org Video Driver
[ 151.159] ABI class: X.Org Video Driver, version 10.0
[ 151.159] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS
[ 151.162] (++) using VT number 8
[ 151.165] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 151.165] (II) [KMS] Kernel modesetting enabled.
[ 151.165] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 151.165] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 151.165] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 151.165] (==) RADEON(0): Default visual is TrueColor
[ 151.165] (==) RADEON(0): RGB weight 888
[ 151.165] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 151.165] (--) RADEON(0): Chipset: "AMD Radeon HD 6900 Series" (ChipID = 0x6719)
[ 151.165] (II) RADEON(0): PCIE card detected
[ 151.165] drmOpenDevice: node name is /dev/dri/card0
[ 151.165] drmOpenDevice: open result is 8, (OK)
[ 151.165] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 151.165] drmOpenDevice: node name is /dev/dri/card0
[ 151.165] drmOpenDevice: open result is 8, (OK)
[ 151.165] drmOpenByBusid: drmOpenMinor returns 8
[ 151.165] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 151.165] (II) Loading sub module "exa"
[ 151.165] (II) LoadModule: "exa"
[ 151.165] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 151.165] (II) Module exa: vendor="X.Org Foundation"
[ 151.165] compiled for 1.10.2, module version = 2.5.0
[ 151.165] ABI class: X.Org Video Driver, version 10.0
[ 151.165] (II) RADEON(0): KMS Color Tiling: disabled
[ 151.165] (II) RADEON(0): KMS Pageflipping: enabled
[ 151.165] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 151.170] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 151.176] (II) RADEON(0): Output DisplayPort-1 has no monitor section
[ 151.180] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 151.184] (II) RADEON(0): Output DVI-0 has no monitor section
[ 151.238] (II) RADEON(0): Output DVI-1 has no monitor section
[ 151.243] (II) RADEON(0): EDID for output DisplayPort-0
[ 151.250] (II) RADEON(0): EDID for output DisplayPort-1
[ 151.254] (II) RADEON(0): EDID for output HDMI-0
[ 151.257] (II) RADEON(0): EDID for output DVI-0
[ 151.312] (II) RADEON(0): EDID for output DVI-1
[ 151.312] (II) RADEON(0): Manufacturer: SAM Model: 736 Serial#: 1129132595
[ 151.312] (II) RADEON(0): Year: 2010 Week: 51
[ 151.312] (II) RADEON(0): EDID Version: 1.3
[ 151.312] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 151.312] (II) RADEON(0): Sync: Separate Composite SyncOnGreen
[ 151.312] (II) RADEON(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 151.312] (II) RADEON(0): Gamma: 2.20
[ 151.312] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
[ 151.312] (II) RADEON(0): First detailed timing is preferred mode
[ 151.312] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 151.312] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 151.312] (II) RADEON(0): Supported established timings:
[ 151.312] (II) RADEON(0): [email protected]
[ 151.312] (II) RADEON(0): [email protected]
[ 151.312] (II) RADEON(0): [email protected]
[ 151.312] (II) RADEON(0): [email protected]
[ 151.312] (II) RADEON(0): Manufacturer's mask: 0
[ 151.312] (II) RADEON(0): Supported standard timings:
[ 151.312] (II) RADEON(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 151.312] (II) RADEON(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 151.312] (II) RADEON(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 151.312] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 151.312] (II) RADEON(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 151.312] (II) RADEON(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 151.312] (II) RADEON(0): Supported detailed timing:
[ 151.312] (II) RADEON(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 151.312] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 151.312] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 151.312] (II) RADEON(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 75 kHz, PixClock max 175 MHz
[ 151.312] (II) RADEON(0): Monitor name: SM2333T
[ 151.312] (II) RADEON(0): Serial No: HVRZC00505
[ 151.312] (II) RADEON(0): EDID (in hex):
[ 151.312] (II) RADEON(0): 00ffffffffffff004c2d360733324d43
[ 151.312] (II) RADEON(0): 331401030e331d782aee91a3544c9926
[ 151.312] (II) RADEON(0): 0f50542308008100814081809500b300
[ 151.312] (II) RADEON(0): a94001010101023a801871382d40582c
[ 151.312] (II) RADEON(0): 4500dd0c1100001e000000fd00383d1e
[ 151.312] (II) RADEON(0): 4b11000a202020202020000000fc0053
[ 151.312] (II) RADEON(0): 4d32333333540a2020202020000000ff
[ 151.312] (II) RADEON(0): 004856525a4330303530350a20200083
[ 151.312] (II) RADEON(0): Printing probed modes for output DVI-1
[ 151.312] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.312] (II) RADEON(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 151.312] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.312] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.312] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.312] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.312] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 151.312] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.312] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.312] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.312] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.312] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 151.312] (II) RADEON(0): Output DisplayPort-1 disconnected
[ 151.312] (II) RADEON(0): Output HDMI-0 disconnected
[ 151.312] (II) RADEON(0): Output DVI-0 disconnected
[ 151.312] (II) RADEON(0): Output DVI-1 connected
[ 151.312] (II) RADEON(0): Using exact sizes for initial modes
[ 151.312] (II) RADEON(0): Output DVI-1 using initial mode 1920x1080
[ 151.312] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 151.312] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:80000000 visible:f7d7000
[ 151.312] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 151.312] (==) RADEON(0): DPI set to (96, 96)
[ 151.312] (II) Loading sub module "fb"
[ 151.312] (II) LoadModule: "fb"
[ 151.312] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 151.312] (II) Module fb: vendor="X.Org Foundation"
[ 151.312] compiled for 1.10.2, module version = 1.0.0
[ 151.312] ABI class: X.Org ANSI C Emulation, version 0.4
[ 151.312] (II) Loading sub module "ramdac"
[ 151.312] (II) LoadModule: "ramdac"
[ 151.312] (II) Module "ramdac" already built-in
[ 151.312] (--) Depth 24 pixmap format is 32 bpp
[ 151.312] (II) RADEON(0): [DRI2] Setup complete
[ 151.312] (II) RADEON(0): [DRI2] DRI driver: r600
[ 151.312] (II) RADEON(0): Front buffer size: 8100K
[ 151.312] (II) RADEON(0): VRAM usage limit set to 221119K
[ 151.312] (==) RADEON(0): Backing store disabled
[ 151.312] (II) RADEON(0): Direct rendering enabled
[ 151.312] (II) RADEON(0): Setting EXA maxPitchBytes
[ 151.313] (II) EXA(0): Driver allocated offscreen pixmaps
[ 151.313] (II) EXA(0): Driver registered support for the following operations:
[ 151.313] (II) Solid
[ 151.313] (II) Copy
[ 151.313] (II) Composite (RENDER acceleration)
[ 151.313] (II) UploadToScreen
[ 151.313] (II) DownloadFromScreen
[ 151.313] (II) RADEON(0): Acceleration enabled
[ 151.313] (==) RADEON(0): DPMS enabled
[ 151.313] (==) RADEON(0): Silken mouse enabled
[ 151.313] (II) RADEON(0): Set up textured video
[ 151.313] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 151.313] (--) RandR disabled
[ 151.313] (II) Initializing built-in extension Generic Event Extension
[ 151.313] (II) Initializing built-in extension SHAPE
[ 151.313] (II) Initializing built-in extension MIT-SHM
[ 151.313] (II) Initializing built-in extension XInputExtension
[ 151.313] (II) Initializing built-in extension XTEST
[ 151.313] (II) Initializing built-in extension BIG-REQUESTS
[ 151.313] (II) Initializing built-in extension SYNC
[ 151.313] (II) Initializing built-in extension XKEYBOARD
[ 151.313] (II) Initializing built-in extension XC-MISC
[ 151.313] (II) Initializing built-in extension SECURITY
[ 151.313] (II) Initializing built-in extension XINERAMA
[ 151.313] (II) Initializing built-in extension XFIXES
[ 151.313] (II) Initializing built-in extension RENDER
[ 151.313] (II) Initializing built-in extension RANDR
[ 151.313] (II) Initializing built-in extension COMPOSITE
[ 151.313] (II) Initializing built-in extension DAMAGE
[ 151.317] (EE) AIGLX error: Calling driver entry point failed
[ 151.317] (EE) AIGLX: reverting to software rendering
[ 151.317] (II) AIGLX: Screen 0 is not DRI capable
[ 151.318] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
[ 151.318] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 151.318] (II) RADEON(0): Setting screen physical size to 508 x 285
[ 151.343] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 151.343] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 151.343] (II) LoadModule: "evdev"
[ 151.343] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.343] (II) Module evdev: vendor="X.Org Foundation"
[ 151.343] compiled for 1.10.0, module version = 2.6.0
[ 151.344] Module class: X.Org XInput Driver
[ 151.344] ABI class: X.Org XInput driver, version 12.2
[ 151.344] (II) Using input driver 'evdev' for 'Power Button'
[ 151.344] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.344] (**) Power Button: always reports core events
[ 151.344] (**) Power Button: Device: "/dev/input/event1"
[ 151.363] (--) Power Button: Found keys
[ 151.363] (II) Power Button: Configuring as keyboard
[ 151.363] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 151.363] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 151.363] (**) Option "xkb_rules" "evdev"
[ 151.363] (**) Option "xkb_model" "evdev"
[ 151.363] (**) Option "xkb_layout" "us"
[ 151.378] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 151.378] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 151.378] (II) Using input driver 'evdev' for 'Power Button'
[ 151.378] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.378] (**) Power Button: always reports core events
[ 151.378] (**) Power Button: Device: "/dev/input/event0"
[ 151.403] (--) Power Button: Found keys
[ 151.403] (II) Power Button: Configuring as keyboard
[ 151.403] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 151.403] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 151.403] (**) Option "xkb_rules" "evdev"
[ 151.403] (**) Option "xkb_model" "evdev"
[ 151.403] (**) Option "xkb_layout" "us"
[ 151.404] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event4)
[ 151.404] (II) No input driver/identifier specified (ignoring)
[ 151.406] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event5)
[ 151.406] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "evdev keyboard catchall"
[ 151.406] (II) Using input driver 'evdev' for 'Microsoft Comfort Curve Keyboard 2000'
[ 151.406] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.406] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events
[ 151.406] (**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event5"
[ 151.433] (--) Microsoft Comfort Curve Keyboard 2000: Found keys
[ 151.433] (II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
[ 151.433] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5/event5"
[ 151.433] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD)
[ 151.433] (**) Option "xkb_rules" "evdev"
[ 151.433] (**) Option "xkb_model" "evdev"
[ 151.433] (**) Option "xkb_layout" "us"
[ 151.433] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event6)
[ 151.433] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "evdev keyboard catchall"
[ 151.433] (II) Using input driver 'evdev' for 'Microsoft Comfort Curve Keyboard 2000'
[ 151.433] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.433] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events
[ 151.433] (**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event6"
[ 151.456] (--) Microsoft Comfort Curve Keyboard 2000: Found 1 mouse buttons
[ 151.456] (--) Microsoft Comfort Curve Keyboard 2000: Found scroll wheel(s)
[ 151.456] (--) Microsoft Comfort Curve Keyboard 2000: Found relative axes
[ 151.456] (--) Microsoft Comfort Curve Keyboard 2000: Found absolute axes
[ 151.456] (--) Microsoft Comfort Curve Keyboard 2000: Found keys
[ 151.456] (II) Microsoft Comfort Curve Keyboard 2000: Configuring as mouse
[ 151.456] (II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
[ 151.456] (II) Microsoft Comfort Curve Keyboard 2000: Adding scrollwheel support
[ 151.456] (**) Microsoft Comfort Curve Keyboard 2000: YAxisMapping: buttons 4 and 5
[ 151.456] (**) Microsoft Comfort Curve Keyboard 2000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 151.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input6/event6"
[ 151.456] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD)
[ 151.456] (**) Option "xkb_rules" "evdev"
[ 151.456] (**) Option "xkb_model" "evdev"
[ 151.456] (**) Option "xkb_layout" "us"
[ 151.457] (EE) Microsoft Comfort Curve Keyboard 2000: failed to initialize for relative axes.
[ 151.457] (II) Microsoft Comfort Curve Keyboard 2000: initialized for absolute axes.
[ 151.457] (**) Microsoft Comfort Curve Keyboard 2000: (accel) keeping acceleration scheme 1
[ 151.457] (**) Microsoft Comfort Curve Keyboard 2000: (accel) acceleration profile 0
[ 151.457] (**) Microsoft Comfort Curve Keyboard 2000: (accel) acceleration factor: 2.000
[ 151.457] (**) Microsoft Comfort Curve Keyboard 2000: (accel) acceleration threshold: 4
[ 151.458] (II) config/udev: Adding input device Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel (/dev/input/event7)
[ 151.458] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Applying InputClass "evdev pointer catchall"
[ 151.458] (II) Using input driver 'evdev' for 'Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel'
[ 151.458] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.458] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: always reports core events
[ 151.458] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Device: "/dev/input/event7"
[ 151.483] (--) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Found 9 mouse buttons
[ 151.483] (--) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Found scroll wheel(s)
[ 151.483] (--) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Found relative axes
[ 151.483] (--) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Found x and y relative axes
[ 151.483] (II) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Configuring as mouse
[ 151.483] (II) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: Adding scrollwheel support
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: YAxisMapping: buttons 4 and 5
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 151.483] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input7/event7"
[ 151.483] (II) XINPUT: Adding extended input device "Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel" (type: MOUSE)
[ 151.483] (II) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: initialized for relative axes.
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: (accel) keeping acceleration scheme 1
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: (accel) acceleration profile 0
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: (accel) acceleration factor: 2.000
[ 151.483] (**) Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel: (accel) acceleration threshold: 4
[ 151.483] (II) config/udev: Adding input device Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel (/dev/input/mouse0)
[ 151.483] (II) No input driver/identifier specified (ignoring)
[ 151.485] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event3)
[ 151.485] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 151.485] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 151.485] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 151.485] (**) Eee PC WMI hotkeys: always reports core events
[ 151.485] (**) Eee PC WMI hotkeys: Device: "/dev/input/event3"
[ 151.510] (--) Eee PC WMI hotkeys: Found keys
[ 151.510] (II) Eee PC WMI hotkeys: Configuring as keyboard
[ 151.510] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input3/event3"
[ 151.510] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[ 151.510] (**) Option "xkb_rules" "evdev"
[ 151.510] (**) Option "xkb_model" "evdev"
[ 151.510] (**) Option "xkb_layout" "us"
[ 151.510] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 151.510] (II) No input driver/identifier specified (ignoring)
[ 151.592] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 151.592] (II) RADEON(0): Using EDID range info for horizontal sync
[ 151.592] (II) RADEON(0): Using EDID range info for vertical refresh
[ 151.592] (II) RADEON(0): Printing DDC gathered Modelines:
[ 151.592] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.592] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.592] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.592] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.592] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.592] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 151.592] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.592] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.592] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.592] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.592] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 151.732] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 151.732] (II) RADEON(0): Using hsync ranges from config file
[ 151.732] (II) RADEON(0): Using vrefresh ranges from config file
[ 151.732] (II) RADEON(0): Printing DDC gathered Modelines:
[ 151.732] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.732] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.732] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.732] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.732] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.732] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 151.732] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.732] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.732] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.732] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.732] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 151.805] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 151.805] (II) RADEON(0): Using hsync ranges from config file
[ 151.805] (II) RADEON(0): Using vrefresh ranges from config file
[ 151.805] (II) RADEON(0): Printing DDC gathered Modelines:
[ 151.805] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.805] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.805] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.805] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.805] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.805] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 151.805] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.805] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.805] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.805] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.805] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 151.885] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 151.885] (II) RADEON(0): Using hsync ranges from config file
[ 151.885] (II) RADEON(0): Using vrefresh ranges from config file
[ 151.885] (II) RADEON(0): Printing DDC gathered Modelines:
[ 151.885] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.885] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.885] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.885] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.885] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.885] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 151.885] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.885] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.885] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.885] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.885] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 151.958] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 151.958] (II) RADEON(0): Using hsync ranges from config file
[ 151.958] (II) RADEON(0): Using vrefresh ranges from config file
[ 151.958] (II) RADEON(0): Printing DDC gathered Modelines:
[ 151.958] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 151.958] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 151.958] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 151.958] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 151.958] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 151.958] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 151.958] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 151.958] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 151.958] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 151.958] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 151.958] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 156.162] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 156.162] (II) RADEON(0): Using hsync ranges from config file
[ 156.162] (II) RADEON(0): Using vrefresh ranges from config file
[ 156.162] (II) RADEON(0): Printing DDC gathered Modelines:
[ 156.162] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 156.162] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 156.162] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 156.162] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 156.162] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 156.162] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 156.162] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 156.162] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 156.162] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 156.162] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 156.162] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 157.229] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 157.229] (II) RADEON(0): Using hsync ranges from config file
[ 157.229] (II) RADEON(0): Using vrefresh ranges from config file
[ 157.229] (II) RADEON(0): Printing DDC gathered Modelines:
[ 157.229] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 157.229] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 157.229] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 157.229] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 157.229] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 157.229] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 157.229] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 157.229] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 157.229] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 157.229] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 157.229] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 157.308] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 157.308] (II) RADEON(0): Using hsync ranges from config file
[ 157.308] (II) RADEON(0): Using vrefresh ranges from config file
[ 157.308] (II) RADEON(0): Printing DDC gathered Modelines:
[ 157.308] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 157.308] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 157.308] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 157.308] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 157.308] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 157.308] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 157.308] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 157.308] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 157.308] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 157.308] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 157.308] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 157.902] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 157.902] (II) RADEON(0): Using hsync ranges from config file
[ 157.902] (II) RADEON(0): Using vrefresh ranges from config file
[ 157.902] (II) RADEON(0): Printing DDC gathered Modelines:
[ 157.902] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 157.902] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 157.902] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 157.902] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 157.902] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 157.902] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 157.902] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 157.902] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 157.902] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 157.902] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 157.902] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 157.978] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 157.978] (II) RADEON(0): Using hsync ranges from config file
[ 157.978] (II) RADEON(0): Using vrefresh ranges from config file
[ 157.978] (II) RADEON(0): Printing DDC gathered Modelines:
[ 157.978] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 157.978] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 157.978] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 157.978] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 157.978] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 157.978] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 157.978] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 157.978] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 157.978] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 157.978] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 157.978] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 158.056] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 158.056] (II) RADEON(0): Using hsync ranges from config file
[ 158.056] (II) RADEON(0): Using vrefresh ranges from config file
[ 158.056] (II) RADEON(0): Printing DDC gathered Modelines:
[ 158.056] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 158.056] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 158.056] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 158.056] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 158.056] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 158.056] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 158.056] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 158.056] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 158.056] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 158.056] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 158.056] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 158.915] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 158.915] (II) RADEON(0): Using hsync ranges from config file
[ 158.915] (II) RADEON(0): Using vrefresh ranges from config file
[ 158.915] (II) RADEON(0): Printing DDC gathered Modelines:
[ 158.915] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 158.915] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 158.915] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 158.915] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 158.915] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 158.915] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 158.915] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 158.915] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 158.915] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 158.915] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 158.915] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 162.988] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 162.988] (II) RADEON(0): Using hsync ranges from config file
[ 162.988] (II) RADEON(0): Using vrefresh ranges from config file
[ 162.988] (II) RADEON(0): Printing DDC gathered Modelines:
[ 162.988] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 162.988] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 162.988] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 162.988] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 162.988] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 162.988] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 162.988] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 162.988] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 162.988] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 162.988] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 162.988] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 166.595] (II) RADEON(0): EDID vendor "SAM", prod id 1846
[ 166.595] (II) RADEON(0): Using hsync ranges from config file
[ 166.595] (II) RADEON(0): Using vrefresh ranges from config file
[ 166.595] (II) RADEON(0): Printing DDC gathered Modelines:
[ 166.595] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 166.595] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 166.595] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 166.595] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 166.595] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 166.595] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 166.595] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 166.595] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 166.595] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 166.595] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 166.595] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
And more commands:
[[email protected] ~]# glxinfo | grep -i opengl
Unknown chipset 0x6719
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on softpipe
OpenGL version string: 2.1 Mesa 7.10.2
OpenGL shading language version string: 1.20
OpenGL extensions:
[[email protected] ~]# glxinfo | grep dire
Unknown chipset 0x6719
direct rendering: Yes
[[email protected] ~]# dmesg | grep drm
[ 1.336436] [drm] Initialized drm 1.1.0 20060810
[ 1.358306] [drm] radeon defaulting to kernel modesetting.
[ 1.358371] [drm] radeon kernel modesetting enabled.
[ 1.359832] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719).
[ 1.359961] [drm] register mmio base: 0xFE620000
[ 1.360031] [drm] register mmio size: 131072
[ 1.360464] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 1.360526] [drm] RAM width 256bits DDR
[ 1.360894] [drm] radeon: 2048M of VRAM memory ready
[ 1.360957] [drm] radeon: 512M of GTT memory ready.
[ 1.361025] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.361088] [drm] Driver supports precise vblank timestamp query.
[ 1.361268] [drm] radeon: irq initialized.
[ 1.361331] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.361684] [drm] Loading CAYMAN Microcode
[ 1.385086] [drm] ring test succeeded in 1 usecs
[ 1.385214] [drm] radeon: ib pool ready.
[ 1.385372] [drm] ib test succeeded in 0 usecs
[ 1.385938] [drm] Radeon Display Connectors
[ 1.386008] [drm] Connector 0:
[ 1.386076] [drm] DisplayPort
[ 1.386146] [drm] HPD5
[ 1.386209] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.386280] [drm] Encoders:
[ 1.386345] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.386426] [drm] Connector 1:
[ 1.386489] [drm] DisplayPort
[ 1.386551] [drm] HPD4
[ 1.386616] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.386685] [drm] Encoders:
[ 1.386748] [drm] DFP2: INTERNAL_UNIPHY2
[ 1.386812] [drm] Connector 2:
[ 1.386874] [drm] HDMI-A
[ 1.386936] [drm] HPD6
[ 1.386999] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 1.387068] [drm] Encoders:
[ 1.387131] [drm] DFP3: INTERNAL_UNIPHY1
[ 1.387194] [drm] Connector 3:
[ 1.387257] [drm] DVI-D
[ 1.387319] [drm] HPD1
[ 1.387382] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 1.387454] [drm] Encoders:
[ 1.387518] [drm] DFP4: INTERNAL_UNIPHY1
[ 1.387580] [drm] Connector 4:
[ 1.387641] [drm] DVI-I
[ 1.387702] [drm] HPD3
[ 1.387763] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 1.387831] [drm] Encoders:
[ 1.387893] [drm] DFP5: INTERNAL_UNIPHY
[ 1.387955] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.259873] [drm] Internal thermal controller with fan control
[ 2.260918] [drm] radeon: power management initialized
[ 2.331033] [drm] fb mappable at 0xC0140000
[ 2.331093] [drm] vram apper at 0xC0000000
[ 2.331152] [drm] size 8294400
[ 2.331210] [drm] fb depth is 24
[ 2.331268] [drm] pitch is 7680
[ 2.331359] fbcon: radeondrmfb (fb0) is primary device
[ 2.542497] fb0: radeondrmfb frame buffer device
[ 2.542497] drm: registered panic notifier
[ 2.542500] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0
[ 29.818060] Modules linked in: eeepc_wmi(+) asus_wmi snd sparse_keymap rfkill pci_hotplug ehci_hcd soundcore wmi ppdev snd_page_alloc parport_pc r8169 usbcore i2c_i801 evdev parport intel_agp sg intel_gtt pcspkr processor button video iTCO_wdt iTCO_vendor_support serio_raw mii fuse ext4 mbcache jbd2 crc16 sd_mod at

KingYes wrote:
[[email protected] ~]# glxinfo | grep -i opengl
Unknown chipset 0x6719
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on softpipe
EDIT:In the glxinfo command its say 'OpenGL vendor string: VMware, Inc'. Why?
I don't really know it but "Unknown chipset" sounds like the card may be so new that it is not yet supported, even in testing. "softpipe" means that it is using software rendering instead of the actual 3d hardware.
It probably will work with newer git versions from mesa and xf86-video-ati and maybe the radeon branch of the kernel. All is found in the inofficial [radeon] repository:
https://bbs.archlinux.org/viewtopic.php?id=79509

Similar Messages

  • Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

    Dear sir
    I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
    Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
    And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
    Please tell me whats the matter?
    My phone serial no  86034HTCA4T
    Modem firmware  04.12.09
    Thanks

    Without contract is not the same as unlocked. The update to iOS 7 relocked
    the iPhone to the wireless carrier to which it was originally locked. You must
    contact that wireless carrier to see if they offer unlocking and if you qualify.
    If you used jailbreak or other hack to unlock the iPhone initially, the method
    used may prevent a legitimate unlock from succeeding and may render your
    iPhone unuseable.

  • I bought this iPhone from Apple Retail Store for the full amount, but  it does not work with my SIM card only works with AT&T

    Hello,
    I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
    I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
    Thanks,
    Best Wishes

    When did you buy it?
    Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
    What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason.  Return it and get your money back, then use that to purchase an unlocked phone.

  • BB8830 World EDition - Verizon - Not working with VODAFONE SIM card

    Hi,
    I bought BB8830 world edition from US to India. It works fine with Airtel Network. But its not working With Vodafone SIM card.
    Option--security option-- Certificates-- Vodafone WLTS(x - red cross mark) is there. It expired on 2008.
    Please let me know any one to find out solution for this. whether I need to updated the BB OS or how it works with vodafone SIM..
    Please post the answer in [email protected]  also.
    Thanks in advance.

    If the phone is unlocked, then contact Vodafone.  They are the carrier you are trying to use, so only they can really help you.

  • My 3G I Phone Not Working With My SIM Card After I Updated my phone

    my 3g iphone now ner not working with my sim card aftet i updated my iphone

    Was your phone originally locked to a different carrier?

  • Iphone 4 model MC603B/A is not working with any sim card

    Hi,
    I just bought myself a Iphone 4 and it is not working with any sim card so far. So far I tried everything, even bought sim cards from different countries to see if that would work. I tried the sim cards in others phones and are working correctly in those.
    Several websites says that this phone is from the UK?! but even the sim cards from the UK arent working.
    I have the legit firmware form iTunes and im up to date. (no jailbreak or what so ever)
    Let me how to fix it.
    Gr. WIlliam

    No, it is NOT OK to talk about jailbreaking either.
    As for why it is criminal, ONLY the carrier has the legal right to authorize unlocking it. In some countries (as it was in the US until recently and may be again soon) it is legal for an individual phone owner to unlock thier phone, it is not legal for a 3rd party to do so.  Also, those services are not just "unlocking" the phone, they are gaining unauthorized access to a commercial database. That is a crime in almost every civilized country.

  • GUYS MY iPHONE 4 IS NOT WORKING WITH THE SIM CARD IN ZIMBABWE,HOW DO I UNLOCK IT?

    GUYS MY iPHONE 4 IS NOT WORKING WITH THE SIM CARD IN ZIMBABWE,HOW DO I UNLOCK IT?

    Only the wireless carrier that the iPhone is locked to is capable of unlocking it.  You'll have to ask them if they will unlock it.  Some will, some won't.
    Hope this helps

  • My board is not working with any graphic cards except mine(mx400)

    Dear friends!  
    I have sent a message but noone understood!
    My problem is simple.
    My mainboard is i845 MSI 6528LE!
    My graphic card is INCA MX 400 Ge force2!
    My mainboard is working good with this graphic card.But it is not working with other cards!For instance Winfast MX440,Asus FX 5200,Ati 9100,Ati 9200SE...
    Why!I tried lots of things.Bios update, i845 driver update...
    Please is there anyone who understand tis problem in MSI?
    Thanks!...  
    0t is not a power suply or voltage or driver problem okey!!!!

    I understand that you are frustrated, but it will help us all to help you if you create a Signature with all the info, and specs of your PC...As this info will keep us from having to guess for example, What Operating system are you running? Windows, Linux?, if Windows what version?, What type and speed Memory are you using? What type of CPU, a P-4, a Celeron, what speed?.ect. What Voltage is the Mem. set to, Voltage of the CPU?...These are all things that we need to know..Otherwise if we do not have this info we have to guess....So please we want to help ..But you have to give us all the info we need ...Sean REILLY875

  • Datasocket does not work with two network cards

    If I have two ethernet card in a PC. The Datasocket server does not work if the second card is enabled. It keeps displaying resolving IP Address. I am wondering if there is a solution for this problem.
    Thanks 

    Thanks for you reply. One card has a static address(10.20.35.1), which is used for Data socket, and the other card uses a dynamic IP address. The card with dynamic address is only used for connecting the PC to the company’s network.
    The second card, when turned on causes the Datasocket server problem. In the Datasocket Server manager I have only two IP addresses under Permissions Groups. (10.20.35.1 and 10.20.35.11. 10.20.35.11 is the IP address of the remote PC with labview application. The Datasocket is used to transfer data between the two PC’s)
    I am wondering if my set up for hosts in Datasocket Server manager is not correct.

  • Satellite A110 - WiFi switch is not working with new WiFi card

    Hello Everyone
    I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
    New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
    Please help

    Hi
    Maybe you could enable the Wlan card using different way;
    Go to device manager -> WLan card properties -> Advanced tab
    There you could check if there is a option which would enables the WLan.
    Its worth a try
    Otherwise its a compatibility issue like suggested by PinkPanther
    I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

  • 1680x1050 not working with ATI card

    I can't seem to get the 1680x1050 native resolution of my LCD working with my ATI X1650 in Arch "current". I've tried configuring X with both:
    Xorg -configure
    and
    hwd -xa
    and adding the Modes line to xorg.conf manually and using both the ati and the vesa drivers and nothing seems to work.
    My current xorg.conf is here: http://pastebin.ca/871761
    For some reason, the resolution it seems to default to is 1920x1440
    Thanks.
    EDIT: If it helps, the monitor is a Samsung Syncmaster 206bw
    Last edited by jdhore (2008-01-25 06:16:33)

    May-C wrote:If youu can't wait anymore: http://bbs.archlinux.org/viewtopic.php?id=42503&p=1
    Post 14... But I would wait if it will be updated this week end.
    You can, as a safe alternative, download the previous version of the catalyst driver which does work.  I have archived the 32-bit packages of catalyst-7.11-2 and catalyst-utils-7.11-1 here:
    http://dev.archlinux.org/~thayer/pkg/

  • New OSX not does not work with RED Rocket Card and old OSX Randomly Logs Out - UNSTABLE

    It looks like my MBPR 16GB (MacBook Pro) randomly logs out and causes my programs to quit unsaved.  I can not update to the new OSX mountain Lion because the new Apple release is no longer compatible with the RED Rocket card needed for debaying RED Scarlet footage.  Mountain Lion causes the RED Rocket to not run correctly with Adobe Premiere. 
    At the same time, I am on Lion and my computer randomly logs me out and I lose all my work.  It seems as though the Retina is unstable. 
    Any help would be greatly appreciated.  Can someone tell me how I can return this.  It seems as though I may have to switch the entire company over to PC if this is not figured out soon. 

    You probably have not received responses for two reasons.
    1. There are not many here that know what this is "RED Rocket card needed for debaying RED Scarlet footage"
    2. Your post appears to contain some sort of threat to Apple about moving to PCs. You are not addressing Apple here. We are users just like you. We don't care if you change over to PCs.
    MBPs and Lion are very stable. Maybe your unsupported third party Red card is causing issues. Their answer seems to be that Mountain Lion is not supported. I wonder why?
    My suggestion if this is a business environment is to not mess with this. If you know for a fact that your Red card works with PCs, change over to PCs. I know that if some tool was not working for my business I would not hesitate to get something that worked.

  • I want to give my Iphone to my sister, but it does not work with her SIM card

    As far as I am aware, the phone was not locked to a particular network but never the less - the phone was bought on T-Mobile UK and she is trying to use a T-Mobile UK sim card. I wiped the phone before giving it to her. However, it is not working! Do I need to inform apple that I have given this device to somone else and they should be 'allowed' to acess the device. Do Iphones lock them seleves to one partuclaur sim card? I replaced the Iphone at the Apple store due to dropping it in some cofee.. would this of caused them to register my device to my sim in particular?
    Thanks for your help.

    If you are both on the T-mobile network, the sim card should work.  If you did a Erase All Content and Settings, then she should be at the point of activation as a new device...talk to T-mobile and be sure the sim she is using is a valid sim card.

  • Kernel 2.6.32 does not work with RT2860 Wireless Card

    since 2.6.31 my RT-2870 is not longer working
    ifconfig says that the Wireless ra0 was renamed to wlan0 and since then its not longer working
    since 2.6.32 my RT-2860 (build in) is not longer working too
    it was renamed from ra0 to wlan0 too and read above^^
    whats happening there?
    since now i used wpa_supplicant but i already tried with NetworkManager and WICD
    //Edit: 2870 works in 2.6.32
    Last edited by Vamp898 (2009-12-17 06:58:27)

    The Official RT-2860 from the RaLink homepage does not work too
    Homepage: http://www.ralinktech.com/support.php?s=2
    Error:
    make -j3 HOSTCC=i686-pc-linux-gnu-gcc CROSS_COMPILE=i686-pc-linux-gnu- LDFLAGS= -j1 -C /usr/src/linux M=/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux PLATFORM=PC CHIPSET=2860 RT28xx_DIR=/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0 RT28xx_MODE=STA clean modules
    make: Entering directory `/usr/src/linux-2.6.32'
    CLEAN /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/Module.symvers /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/modules.order
    LD /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/built-in.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_md5.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_sha2.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_hmac.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_aes.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_arc4.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/mlme.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_wep.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/action.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_data.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rtmp_init.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_tkip.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_aes.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_sync.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/eeprom.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_sanity.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_info.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_cfg.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_wpa.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/dfs.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/spectrum.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rtmp_timer.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rt_channel.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_profile.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_asic.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_cmd.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/assoc.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/auth.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/auth_rsp.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/sync.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/sanity.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.o
    /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.c: In Funktion »STAHandleRxMgmtFrame«:
    /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.c:689: Warnung: Variable »pRxD« wird nicht verwendet
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/connect.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/wpa.o
    CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.o
    /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c: In Funktion »RtmpOSNetDevAttach«:
    /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1689: Fehler: »struct net_device« hat kein Element namens »open«
    /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1690: Fehler: »struct net_device« hat kein Element namens »stop«
    /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1691: Fehler: »struct net_device« hat kein Element namens »hard_start_xmit«
    /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1692: Fehler: »struct net_device« hat kein Element namens »do_ioctl«
    /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1702: Fehler: »struct net_device« hat kein Element namens »get_stats«
    /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1736: Fehler: »struct net_device« hat kein Element namens »validate_addr«
    make[1]: *** [/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.o] Fehler 1
    make: *** [_module_/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux] Fehler 2
    make: Leaving directory `/usr/src/linux-2.6.32'

  • STP not working with my sound card??

    Before upgrading to FCS3, whenever I would export something from FCP to STP, I would not have any audible sound in STP. I thought the upgrade would solve the problem but its gotten worse. Now when I launch STP, I get static. If I play an audio file, you can see the meter moving but no sound. Its like it doesn't recognize the sound card. I have a Black Magic Deck Link HD breakout and all my audio for
    the computer goes through that, except STP. Is STP not compatible with Deck Link or something? any suggestions welcomed. thanks

    I'm having basically the same issues except with STP 2 and a Tascam Us144 MKII, find out a fix for this at all?

Maybe you are looking for

  • ITunes 7 wont even start, corrupted old versions

    I tried upgrading to version 7. the installation went well, but when i try opening it for the first time, i agree to the licence agreement and then i get an "unknown error message [-200]" whats up with that. i cleaned out my registry, re-installed, a

  • How do I extend the end of a video clip?

    Hi, I have placed my video clip in my composition and at the end of it, I want to extend the last frame of that video all the way to the end. Just freeze the last frame. How do I do this? I searched this forum using search terms like "extend" and "fr

  • How to include IE on form Canvas (same windows)

    I Use OLE Container Object to Show IE on the forms6i Canvas (same windows) It's work like separate frame on the same Canvas ..;but when I migration to forms 9i , It's not working .Can I have any way to do this on the form9i

  • Apple TV and No HDMI

    So we're planning on getting an Apple TV or Roku. I've always liked Apple's products, and would prefer that. One thing though. Our tv has no HDMI port (Sony Wide Screen KP-46WT500 Rear Projection TV). I've read we can still hook it up with an adapter

  • Front Row DVD Player settings

    I would like to have the front row dvd player use the settings from my Apple DVD Player but it seems the current version of front row does not use those settings. On my TV, a 1080p sony display, the image quality is highly depended on these settings.


HashFlare