Gobi2000 - Windows 7 x64

Hello!
There is a problem with Gobi2000 miniPCI Express Card and Windows 7 Ultimate 64bit compatibility in Thinkpad T510i, 43145KG. Further tips would be needed to process with this issue...any comments would be welcome!
PROBLEM DESCRIPTION
Gobi was working couple of months but for some reason it stopped working suddenly.Wireless WAN radio is off and it can't be turned on eg. via Fn+F5.
STEPS DONE
Below have been listed steps applied and the error log.
A lot of efforts have already been tried:
Disk image was restored from time period when Gobi was working but even that didn't correct for some reason the situation
Access Connections, Power Manager, Hotkeys uninstalled and re-installed also with different Windows compatibility modes but no results
The laptop was re-installed totally from the scratch but no resolution
A lot of forum posts gone through but no help there either
ERROR LOG
Connection status:       Not connected
Cause:       Wireless WAN Radio is not powerd ON.
Error code:       044
Recommended action:
Communication with WAN service provider could not be established because the wireless radio is off. To power on the radio and attempt to connect, click Repair.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name       Qualcomm Gobi 2000 HS-USB Mobile Broadband Device 9205
Adapter type       WAN
Adapter speed       400.0 Mbps
Adapter status       Enabled
Connection Status       Not connected
Internet Settings
IE Settings
Home page
Proxy settings
Automatically detect settings?       Yes
Use automatic configuration script?       No
Bypass proxy for local addresses?       No
System Information
System model       43145KG
BIOS version       6MET49WW (1.12 )
Operating system version       Windows 7
Access connections version       5.62
Global Settings
Network
Allow Windows users without administrator privileges to create and apply location profiles       ->No
Allow the wireless LAN radio to be turned off when inactive       -> Yes
Enable autodeletion of unused profiles       -> No
Disable the Peer to Peer community feature       -> Yes
Enable Access Connections software update dialog when critical update is available in web site       -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray       -> No
Show wireless status icon in task tray       -> No
Display the progress indicator window when a profile is being applied       -> Yes
Show Access connections Gauge in task bar       -> Yes
Preferences
Enable sound effects       -> No
Do not show balloon tips from the Access Connections system tray icon       -> Yes
Do not show balloon tips from the Access connections Gauge       -> Yes
Show WiMAX page as default on Main GUI       -> No
Automatic location profile switching list
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports       -> No
Preferred Location Of WLAN       -> No
When no other connections are available, connect through Wireless WAN or WiMAX       -> No
Wireless priority list
Selection    Priority     Location profile name                                            Connection order                 Connection details
Log File
Debug Log is disabled
Solved!
Go to Solution.

Got finally Gobi2000 working and here was the resolution:
A) Windows 7 was re-installed from the different installation disk
- it might be that Windows and/or installation disk was somehow corrupted
B) Lenovo software was installed in the order listed below
1.Power Management driver: 6iku08ww.exe
2.Qualcomm Gobi2000: 7xwc44ww.exe
3.Hotkey Features: 81vu13ww.exe
4.Access Connections: 81c757ww.exe
C) Wireless WAN Radio can be turned on with Fn+F5
Thanks for the support and tips, hopefully above will help if someone has similar kind of problems!

Similar Messages

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

How to install apex on windows x64 with 10gR2?

Hello,
today I tried to install the http-server for our 10gR2-database. We are using windows x64.
But I cant find OHS for this release. How can I install apex then?
Regards,
Mark

have you tried the installation, or did you just ask in advance?
in the last wekks i did a lof of installation stuff on an x64 system using the old x32 versions. even oracle sw like 10.2.0.3 client etc.
and most oft the stuff was up and running just like on an x32 system.
just keep in mind that the directory structure an x64 is slightly different #
if u install x32 software the default installation path is "C:\Program Files (x86)" and in the registry a speacial key hklm\software\wow6432node
just in case you need to patch.
in my opinion it would be worth to give i a try, but remember not on a productive system.
i'd like to hear about your results
regards peter
Edited by: yeti on Jul 3, 2009 2:41 PM

J2SE 1.4.2 for Windows x64 bit download link

Dear All,
Can any one give me the link to download J2SE 1.4.2 for Windows x64 bit architecture?
Your help is highly appreciated.
Regards,
Syed

There should be no issues with using SAP JVM from the start.
Probably no notes because is straightforward:
- Extract the SAP JVM (e.g. c:\sapjvm_4)
- Set JAVA_HOME (c:\sapjvm_4)
And start installation as per guide.
We have done this recently with Solman 7 EHP1 and NW 7 EHP1 (J2EE stack).
We did have issue on central instance install where the J2EE instance would not start part way through installation (server0 continually crashed and restarted with memory issues) so we had to adjust the instance settings as per SAP Note#1603093, before retrying in SAPINST and continuing.
We had this problem with both Solman & NW 7 EHP1.

Oracle Express Database - Windows x64

At the risk of being seriously repetitive, I'll post a question I have seen in various forms for approximately 3.5 years. The user community needs to have a specific, fact-based answer to the problem of no x64 support on Windows. In several threads one can find via Google, people purporting to be Oracle representatives claim a supported version will be available "soon". Soon in my neck of the woods generally means a time frame less than 3 years, but what do I know. Can someone please, please provide a definitive statement of direction on this issue, and assuming this is coming "soon", it would be overwhelmingly wonderful to have a specific date. My company plans/desires/hopes to release software that would embed an Oracle Express db, and frankly I'm about to throw in the towel if I can't get some visibility to this question. As I've heard from many ex customers, "there's always Sql Server".
Regards, Roger Carter, President, DBConnect Solutions, Inc.

Thanks for the update. I followed up with Oracle internally via our Oracle Partnership channel, and they checked with the VP of development responsible for XE. The official response is "there is no date where this will be provided for Windows x64. It is, however, under consideration." In my 25+ years of working with Oracle, I will give you my translation - it is not going to happen anytime soon, and to your point, it will probably be version 12 before you see anything. For us, this is a huge disappointment, and it means we will be abandoning many thing with Oracle. It's my view that they don't care about this vertical one bit.

Oracle XE on Windows x64

Hello, is possible to install Oracle Express Edition on Windows x64 ? When I try to install I get error "Error: 1719 The Windows Installer Service could not be acessed"

Hi,
In fact, Oracle didn’t have a x64 version for Oracle XE, but usually 32 bits softwares run without problems in x64 platforms ... Have you checked out if is there any O/S user's privilege issue related to this problem?
Cheers
Legatti

11g R2 - 2 node RAC on Windows X64 2003 Server

hi
we are soon going to start building a 2 node 11g R2 RAC on Windows X64 2003 server
questions
1. In 11g R2, is creating 2 disk group DATA and FRA still considered the best practice?
2. On which disk group should we place the OCR and Voting Disk
3. If there are issues placing OCR and Voting Disk on ASM (there definitely appears to be some concerns / reported issues on this), is using OCFS2 still a viable option?
4. Can someone point us to a document such as step by step installation of 11g R2 RAC on Windows with ASM or best practices 11g R2 RAC on Windows?
thanks

A bit late maybe, but you can check Note 811271.1 - RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows).
Edited by: olmartins on Jun 2, 2010 11:53 AM

Installation XE 11. on Windows x64 ( 64-bit) 2008

Dear All ,
I want to know if latest XE edition is certified on Microsoft Windows x64 (64-bit) 2008 OS ?
We have installed specific version on Windows x64 (64-bit) 2008 OS.
We get the following error :
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
and there is a respective Doc ID :
Note 1060806.1: OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
Action Plan
========
1. Install 64-bit version of Oracle database software.
2. Upgrade the database from 32-bit version to 64-bit version.
Can we use Oracle XE on specific OS ?

Hello,
I want to know if latest XE edition is certified on Microsoft Windows x64 (64-bit) 2008 OS ?No. See [url http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm#BABHICJH]XE's System Requirements for details.
Similar error messages have been reported here before, e. g. in {message:id=10665775}.
It seems possible to get XE started on 64bit Windows, but it might be a hard fight, especially on a server OS with other possible traps..
Can we use Oracle XE on specific OS ?Sure, all certified 32bit Windows versions or 64bit Linux versions would be fine. See {thread:id=2278170} to get a full report.
-Udo

Hyperion Planning on Oracle DB 11.1.0.6.0(Microsoft Windows (x64))

1. Is Hyperion Planning 11.1.1.3 certified to work on Oracle DB 11.1.0.6.0 (Microsoft Windows (x64)) ?
2. Is Oracle Database 11.1.0.6.0(Microsoft Windows (x64) certified to work on Windows 7 Pro 64bit ?

You also do realize Hyperion Planning/Essbase/... is not supported on Windows 7 Pro. If you wish to install on a supported operating system install on Windows 2003 Server x64.
Yes, 11.1.0.6 is supported as a database for Hyperion 11.1.1.3 - review the certification matrices for Hyperion at: http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
No, Windows 7 is not a supported platform for 11.1.0.6 databas - review http://download.oracle.com/docs/cd/B28359_01/install.111/b32305.pdf
You can also located supported platforms with say 5 minute software with say 10 minutes of using google. If you do not have this much time to put towards the installation then you should not be installing as you should review all installation documentation before proceeding as it is at least a full day activity to do it properly (even after you have done it 20-30 times).
Regards,
John A. Booth
http://www.metavero.com

Installing 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64

Dear all;
I just downloaded 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 on my local pc...I am trying to run the install.bat after unzipping the file however, the black pop-up window comes up and disappears almost immediately. Does anyone know what is causing this. Also all help is appreciated with the installation. Kindly note, I have read the installation manual and it is not really helpful.

this is the content of it
@echo off
REM ====================================
REM ODAC 11.2.0.2.1 XCOPY INSTALL SCRIPT
REM ====================================
REM
REM This batch file installs components in an Oracle Instant Client Home
REM
REM ====================
REM MODIFICATION HISTORY
REM ====================
REM
REM 11/15/10 - change version number to 11.2.0.2.1
REM 06/30/10 - change version number to 11.2.0.1.2
REM             Add ODP.NET 4 and ASP.NET 4 components
REM 08/21/09 - change version number to 11.1.0.7.20
REM 08/21/09 - remove component odp.net 1.x
REM 01/22/08 - Handle directory names with spaces
REM 01/22/08 - Fixed oracle.key file generation so that products that rely on
REM             it can reference the appropriate registry location
REM 01/22/08 - Log all xcopy operations to the install.log in the destination
REM             directory
goto :ParseArgs
REM **********************
REM INSTALL ALL COMPONENTS
REM **********************
:InstallAll
REM installing everything so set DEP to false or else dependencies such as
REM basic client will get installed needlessly by each component
set DEP=false
call :basic %1 %2 %3 %4
call :odp.net20 %1 %2 %3 %4
call :odp.net4 %1 %2 %3 %4
call :asp.net %1 %2 %3 %4
call :asp.net4 %1 %2 %3 %4
call :oledb %1 %2 %3 %4
call :oramts %1 %2 %3 %4
goto :EOF
REM ************************
REM INSTALL ASPNET Providers
REM ************************
:asp.net
REM echo Please wait... installing Oracle Providers for ASP.NET
if {%DEP%} == {true} (
call :odp.net20 %1 %2 %3 %4
echo *************************************** >> %2\install.log
echo Installing Oracle Providers for ASP.NET >> %2\install.log
echo *************************************** >> %2\install.log
REM copy the files
xcopy asp.net %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM pass in false for dependency because odp.net2x files are not copied over yet
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat asp.net %3 false
call configure.bat asp.net %3 false
popd
echo.>> %2\install.log
echo ************************************** >> %2\install.log
echo Oracle Providers for ASP.NET installed >> %2\install.log
echo ************************************** >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Providers for ASP.NET installed in an Oracle Instant Client Home.
goto :EOF
REM **************************
REM INSTALL ASPNET Providers 4
REM **************************
:asp.net4
REM echo Please wait... installing Oracle Providers for ASP.NET 4
if {%DEP%} == {true} (
call :odp.net4 %1 %2 %3 %4
echo ***************************************** >> %2\install.log
echo Installing Oracle Providers for ASP.NET 4 >> %2\install.log
echo ***************************************** >> %2\install.log
REM copy the files
xcopy asp.net4 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM pass in false for dependency because odp.net4 files are not copied over yet
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat asp.net4 %3 false
call configure.bat asp.net4 %3 false
popd
echo.>> %2\install.log
echo **************************************** >> %2\install.log
echo Oracle Providers for ASP.NET 4 installed >> %2\install.log
echo **************************************** >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Providers for ASP.NET 4 installed in an Oracle Instant Client Home.
goto :EOF
REM *******************
REM INSTALL ODP.NET 2.0
REM *******************
:odp.net20
REM echo Please wait... installing Oracle Data Provider for .NET 2.0
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ******************************************** >> %2\install.log
echo Installing Oracle Data Provider for .NET 2.0 >> %2\install.log
echo ******************************************** >> %2\install.log
REM copy the files
xcopy odp.net20 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat odp.net20 %3
call configure.bat odp.net20 %3
popd
echo.>> %2\install.log
echo ******************************************* >> %2\install.log
echo Oracle Data Provider for .NET 2.0 installed >> %2\install.log
echo ******************************************* >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Data Provider for .NET 2.0 installed in an Oracle Instant Client Home.
goto :EOF
REM *****************
REM INSTALL ODP.NET 4
REM *****************
:odp.net4
REM echo Please wait... installing Oracle Data Provider for .NET 4
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ****************************************** >> %2\install.log
echo Installing Oracle Data Provider for .NET 4 >> %2\install.log
echo ****************************************** >> %2\install.log
REM copy the files
xcopy odp.net4 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat odp.net4 %3
call configure.bat odp.net4 %3
popd
echo.>> %2\install.log
echo ***************************************** >> %2\install.log
echo Oracle Data Provider for .NET 4 installed >> %2\install.log
echo ***************************************** >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Data Provider for .NET 4 installed in an Oracle Instant Client Home.
goto :EOF
REM *************
REM INSTALL OLEDB
REM *************
:oledb
REM echo Please wait... installing Oracle Provider for OLEDB
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ************************************* >> %2\install.log
echo Installing Oracle Provider for OLE DB >> %2\install.log
echo ************************************* >> %2\install.log
REM copy the files
xcopy oledb %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat oledb %3
call configure.bat oledb %3
popd
echo.>> %2\install.log
echo ************************************ >> %2\install.log
echo Oracle Provider for OLE DB installed >> %2\install.log
echo ************************************ >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Provider for OLEDB installed in an Oracle Instant Client Home.
goto :EOF
REM **************
REM INSTALL ORAMTS
REM **************
:oramts
REM echo Please wait... installing Oracle Services for MTS
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ********************************** >> %2\install.log
echo Installing Oracle Services for MTS >> %2\install.log
echo ********************************** >> %2\install.log
REM copy the files
xcopy oramts %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat oramts %3
call configure.bat oramts %3
popd
echo.>> %2\install.log
echo ********************************* >> %2\install.log
echo Oracle Services for MTS installed >> %2\install.log
echo ********************************* >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Services for MTS installed in an Oracle Instant Client Home.
goto :EOF
REM ***********************************
REM INSTALL Basic Oracle Instant Client
REM ***********************************
:basic
REM echo Please wait... installing Basic Oracle Instant Client
echo ************************************** >> %2\install.log
echo Installing Basic Oracle Instant Client >> %2\install.log
echo ************************************** >> %2\install.log
REM copy the files
xcopy instantclient_11_2 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
call configure.bat basic %3
popd
echo.>> %2\install.log
echo ************************************* >> %2\install.log
echo Basic Oracle Instant Client installed >> %2\install.log
echo ************************************* >> %2\install.log
echo.>> %2\install.log
REM echo Basic Oracle Instant Client installed.
REM echo.
REM echo Please prepend %2 and %2\bin to system path environment variable
goto :EOF
REM =======================
REM Parse Script Arguments
REM =======================
:ParseArgs
if /i {%1} == {} goto :Usage
if /i {%2} == {} goto :Usage
if /i {%3} == {} goto :Usage
if /i {%1} == {-h} goto :Usage
if /i {%1} == {-help} goto :Usage
REM install dependencies or not - default is true
set DEP=true
if /i {%4} == {false} set DEP=false
if NOT EXIST %2\*.* (
mkdir %2 > NUL 2>&1
echo ****************** >> %2\install.log
echo ODAC install files >> %2\install.log
echo ****************** >> %2\install.log
REM /R to overwrite readonly files at destination
REM /Y to overwrite an existing file without prompting
xcopy configure.bat %2 /R /Y /F >> %2\install.log
xcopy unconfigure.bat %2 /R /Y /F >> %2\install.log
xcopy uninstall.bat %2 /R /Y /F >> %2\install.log
echo.>> %2\install.log
if /i {%1} == {basic}     goto :basic
if /i {%1} == {odp.net20} goto :odp.net20
if /i {%1} == {odp.net2} goto :odp.net20
if /i {%1} == {odp.net4} goto :odp.net4
if /i {%1} == {asp.net}   goto :asp.net
if /i {%1} == {asp.net2} goto :asp.net
if /i {%1} == {asp.net4} goto :asp.net4
if /i {%1} == {oledb}     goto :oledb
if /i {%1} == {oramts}    goto :oramts
if /i {%1} == {all}       goto :InstallAll
goto :Usage
:Usage
echo.
echo Usage:
echo   install.bat component_name oracle_home_path oracle_home_name [install_dependents]
echo.
echo Example:
echo   install.bat all       c:\oracle myhome       (install all components)
echo   install.bat odp.net2 c:\oracle myhome true (install ODP.NET 2 and its dependent components)
echo   install.bat odp.net4 c:\oracle myhome true (install ODP.NET 4 and its dependent components)
echo   install.bat asp.net2 c:\oracle myhome true (install ASP.NET Providers 2 and its dependent components)
echo   install.bat asp.net4 c:\oracle myhome true (install ASP.NET Providers 4 and its dependent components)
echo   install.bat oledb     c:\oracle myhome true (install OraOLEDB and its dependent components)
echo   install.bat oramts    c:\oracle myhome true (install ORAMTS and its dependent components)
echo   install.bat basic     c:\oracle myhome false (install Oracle Instant Client)
goto :EOF

Windows x64, EMET 4.1 and Spotify

I am running Windows x64 Home Premium with EMET v4.1. So far everything has been fine. Yesterday I tried to install Spotify and got an ESrror 53. When I contacted Spotify, they said "Error
53 is usually due to restrictions in place on the computer."
I then tried installing Spotify on my Windows Home Premium x32 laptop, also running EMET v4.1 and it installed fine.
Anyone able to install Spotify client on x64 with EMET?
I did try disabling features in EMET as part of the troubleshooting process.

does removing the emet client resolve the issue? The normal EMET mitigation's don't protect services but rather user mode applications. It could be changes to system wide mitigations though possibly
GBS Premier Field Engineer Cybersecurity Check out my blog http://blogs.technet.com/kfalde or better yet check out http://technet.com/wiki and start contributing :)

Client installation on Windows x64

Hi,
We have a server running Windows 2003 Server x32, with Oracle version 10.2.0.1.0.
We have a terminal server running the 10.1.0.2.0 client, which connects to it perfectly.
We have built a new Windows Terminal server, running Windows x64. We are having some issues getting the client to work. Firstly, we installed from win32_11Gr1_client. The connection worked fine, but when we ran the third party app that we utilise, it continually gave us connection issues, and the third aprty advised we needed the 64 bit edition of the client.
We installed that, but couldn't get a connection at all. The app uses a Windows ODBC connection, and the x64 client only let us create 64 bit ODBC connections that our 32 bit application can't utilise.
At that point, we were asked to install the 32 bit client. Using the 10.2.0.1 x32 client install, the application fails to connect at all, using the same (we copied the file) tnsnames.ora, which I'm guessing comes down to some difference in the ODBC package, as I'm aware the clients are supposed to be cross version compatible. I CAN connect from SQLPLUS, but the app just says "connection failed".
Any of the following bits of advice would assist with our problem:
- How can we install the x64 client, and create ODBC connections that an x32 app can utilise?
- Why doesn't the 10.2.0.1 client (same version as the server) appear to want to talk to the server?
The vendor is unfortunately of a position that we are effectively on our own, so any assistance would be greatly appreciated.

Hi
herewith some answer that migth help you.
How can we install the x64 client, and create ODBC connections that an x32 app can utilise?
http://download.oracle.com/docs/cd/B19306_01/win.102/b14320/prog.htm#sthref420
Why doesn't the 10.2.0.1 client (same version as the server) appear to want to talk to the server?
http://download.oracle.com/docs/cd/B19306_01/install.102/b15684/ts.htm#NXCLI008
Please let know if this helps.
Regards,
Hub

No PKCS#11 support in JDK 6 Update 14 for Windows x64?

Hi there,
I successfully installed GlassFish 2.1 on Windows 2008 x64 with JDK 6 Update 13 for x64. Everything was ok until I wanted to access my USB token with a certificate on it trough an EJB.
I then had to reinstall everything based on 32-bit versions. Now it works again, but I'm not very satisfied with the solution because I wanted to have everything based 64-bit.
Why JDK 6 Update 14 for Windows x64 does not contain PKCS#11 support? When you have look to the x86 version support is available there.

If you load successfully your pkcs11 lib into java 32bit mean that the lib is 32bit.
You cannot load a 32bit native lib into java 64bit ( http://java.sun.com/docs/hotspot/HotSpotFAQ.html#64bit_native_porting ).
If you find the 64bit lib for your token, you should be able to use java64.

Jdk-7u3-windows-x64 installation issues

Hi,
I've just download the jdk-7u3-windows-x64.exe and jdk-6u30-windows-x64.exe and tried install them on my window 7 professional service pack 1 platform, but both installations failed with the error message "...\jdk-7u3-windows-x64.exe is not a valid win32 application" and "...\jdk-7u3-windows-x64.exe is not a valid win32 application". However, when I install with the jdk-6u26-windows-x64.exe and jdk-7-windows-x64.exe, it's fine. Please help me how to fix the issue to update the new java package.

Thank you, Gimbal2. It's really strange, but it's true. I give you some screen snipping as following:
1, My system:
[http://farm8.staticflickr.com/7127/6856787896_fc99f16f7d_b.jpg]
2, When install the jdk-7u3-x64
[http://farm8.staticflickr.com/7199/7002892173_2657c97bbd_b.jpg]
3, When install the jdk-6u30-x64
[http://farm8.staticflickr.com/7105/6856777806_41d774bb4e_z.jpg]
4, When install the jdk-7-x64
[http://farm8.staticflickr.com/7277/7002892257_3358af89a6_b.jpg]
5, When install the jdk-6u26-x64
[http://farm8.staticflickr.com/7261/6856777882_57927e0b1e_b.jpg]
or you can find these images at my flckr photostream : [http://www.flickr.com/photos/ideaarchitect]
Edited by: user4200434 on Mar 21, 2012 7:08 AM

Microsoft Windows x64 Enterprise Manager Agent 12.1 file for Self Update

Anyone know where I can download the Microsoft Windows x64 Agent for Enterprise Manager 12c Self Update feature? This file will be used by 12.1 Self Update feature in offline mode. Installing the Management Agent on the host is not possible.

Hi,
You can keep a track of the release dates from the following document:
Note 793512.1 : Release Schedule of Current Enterprise Manager Releases and Patch Sets
Best Regards,
Venkat

Windows x64 and recently released Sounblaster Live! 64 bit driv

I downloaded the new SB Li've! drivers (Creative Sound Blaster Li've! x64 Driver (2.23MB) released 2 Augh 05) - uninstalled all Creative programs and all Audio drivers on my system, and proceeded to install the drivers as instructed. I reboot my system and I get sound...but only in my front left, front right, and subwoofer. I go to my sound and audio settings, switch my advanced settings to 7. home theatre, and still only the 2 front speakers and the sub are working. Why would Creative release a driver that doesn't work? Any help? [email][email protected]][email protected][/url] or AIM = t0ide
I've been trying to make this thing work since I've been using Windows x64...about 5 months now. Any help is highly appreciated.
Mike

Let me guess, CMSS is disabled?

Gobi2000 - Windows 7 x64

Similar Messages

Maybe you are looking for