Going from Office 2010 to 2013 and Back to 2010 I lost My Outlook Search

Hello--
We are doing some beta testing and I had to install Office 2013 from 2010. I finished the testing and went back to 2010.
Now, when I do a Windows search, my Outlook email is not included in the search results. This is a major loss to my productivity. I believe I read that Outlook email is not included in the Windows search with 2013, so that's probably why I lost it.
Can you tell me how I can include Outlook email in my Windows searches again? I searched for solutions online and all I got were questions.
Thanks!
Stephen
Stephen Davis

Hi,
Sorry for not having resolved this issue so far. We can try to uninstall Office 2010 first, then delete the following registry keys from the location:
Win + R, type "regedit"(without quotes) then press Enter.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook
HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook
HKEY_LOCAL_MACHINE\Software\Microsoft\Office\14.0\Outlook
HKEY_LOCAL_MACHINE\Software\Microsoft\Office\15.0\Outlook
HKEY_LOCAL_MACHINE\Software\Microsoft\Office\Outlook
Once the keys are deleted restart the computer, then re-install Office 2010 to check the result.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here
That fixed it. After I did the steps you indicated, I went back to the Indexing options and made sure the Office14 folder was included.
Thansk
Stephen Davis

Similar Messages

Blue screen of death, and continous reboot. Phone never actually boots up, just keeps going from reboot to blue screen and back again. Any suggestion?

Blue screen of death, and continous reboot. Phone never actually boots up, just keeps going from reboot to blue screen and back again. Any suggestion?

Hello jared1915
If you are stuck in that loop, the next step would be to restore your iPhone. Check out the article below to get your iPhone into recovery-mode and restore it in iTunes.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs

ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs. Setting up the connection has been a hit and miss. Have tried both x86 and x64. Any ideas? Use ODBC from the control panel and C:\Windows\SysWOW64 same results. Using
SQLexpress 2008r2
Thanks

Hello,
Please consider to configure Windows Firewall or disable it. Not only Windows Firewall but any security software.
https://msdn.microsoft.com/en-us/library/cc646023(v=sql.120).aspx
Windows Firewall is enabled by default.
Make sure you are using SQL Server Native Client to create the ODBC DSN. Not all Windows versions have it, so you may need to download and install it.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back. The problem occurs in both MS Word and Pages. Any idea of how to resolve this annoying problem is appreciated. System: 10.10.1

When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.10.1 on a MacPro (Late 2013)

The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
https://www.youtube.com/watch?v=ZNQ0D84DdF4
What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.

I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

Welcome to the Apple Community.
Photos and some other items are added back after the restore has completed, you may need to wait a while.

I bought an iphone 5 from one of my friends and unluckily I had yet lost his contact, I had update this iphone to IOs 7 and now it's be locked at iCloud because there was no password . Actually I dont know what I must do for its. Experts, please help me!

I bought an iphone 5 from one of my friends and unluckily I had yet lost his contact, I had update this iphone to IOs 7 and now it's be locked at iCloud because there was no password . Actually I dont know what I must do for its. Experts, please help me!

The friend who sold it to you needed to clear his Apple ID off the phone before he sold it to you. Of course if it wasn't his phone in the first place then he could not do so. He is your friend but you don't know where he is?
There is nothing that will help you short of getting the password for the Apple ID from your friend. If you cannot obtain that there is no workaround.

SharePoint Foundation 2013 and InfoPath Filler 2010

Hello, I am having an issue in which when I click to add a new document created in InfoPatht, I am taken to a page that says the following:
The webpage cannot be displayed
Most likely cause:
•Some content or files on this webpage require a program that you don't have installed.
What you can try:
Search online for a program you can use to view this web content.
Retype the address.
Go back to the previous page.
I confirmed that Office SP2 is installed on the machine. If I click on new document, on a machine that has InfoPath Filler 2013, it works fine. However, the users have InfoPath Filler 2010. The site has been added to the Local intranet and the trust on the
form is set to Domain trust.
Any Ideas as to what might be causing this???

Hello, if I remember correctly the issue was that I created the form with InfoPath 2013 and was trying to test using InfoPath 2010. This does not work.
Did you create the form using InfoPath 2013?

User settings migrated from Office 2007 to 2013 using OCT

Does anyone know what user settings are retained after upgrading Office 2007 to 2013 using the OCT? I have set the checkbox to migrate user settings in the OCT but all of the user's pinned documents are not longer there after the upgrade. Is this normal?

Microsoft doesn't support migrating directly from SharePoint 2007 to SharePoint 2013, likely part of your decision to use a third party tool.
I'm not familiar with these error messages, I suspect they're from DocAve and not SharePoint.
My suggestion is to contact AvePoint support.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

How do I copy iPhoto 7.1 Library from Intel to PPC Mac and back

Hello all
I apologize for the long first post; but I've been lurking for a while and haven't seen a similar problem. Any assistance would be greatly appreciated.
I have two Macs - a PowerBook G4 and an Intel Mini. I copied the 6.x Library from the PB to the Mini. The copy was successful - no issues. I upgraded iLife on both machines successfully: both machines opened the 6.x Library and updated it the 7.0.1 Package Library. All was well.
I updated both machines to iPhoto 7.1. All was well.
I updated the PB to 7.1.1 + all the recent updates. All was not well! The Library seemed to be corrupted! When I clicked on a thumbnail I would see the photo "zoom" but then I'd see a black window. Clicking again would unzoom and I'd again see all the thumbnails. If I tried to export a photo Preview couldn't view it because it was "corrupt" or should be opened by another application.
After numerous troubleshooting steps - repairing permissions, deleting preferences, trying to rebuild the thumbnail caches, rebuild the Library, recover lost photos etc I gave up.
I've wiped the PB clean and installed Leopard and iPhoto 7.1 - not 7.1.1.
Now I want to copy the iPhoto Library from the Mini (also iPhoto 7.1). I tried copying the package across the network by "Connect to server" in Finder but that produced the same "corrupted" symptoms. (Thumbnails would zoom to black window.)
So here's the question(s):
Are there any incompatibilities between Intel/G4 versions of the iPhoto apps or Library Packages?
What is the best way to manually copy the Library from the Mini to the PB? And back?
I use the PB on the road and on vacation to capture my 'photos; but I like to display them on my HDTV connected to my Mini - hence my need to periodically copy the Library from the PB to the Mini.

**boojum**
Welcome to the Apple Discussions.
Are there any incompatibilities between Intel/G4 versions of the iPhoto apps or Library Packages?
No.
What is the best way to manually copy the Library from the Mini to the PB? And back?
Try using Firewire target mode.
Regards
TD

How can I get Back all of my data after restoring and back up ? I lost my data and I did back up

when I did restore and update .. I lost all of my data , then I pressed to back up buttom , when I try to restore data , its disapper . is there anyway to get back all data lost ?

If you are backing up to your computer, check iTunes/Edit/Preferences/Devices, if there are nay other backups listed.
Since each backup replaces the old one if not used to restore from, your data might be lost since you seem to have backed up a phone without any personal data.
Check this article about how to restore from backups:
iOS: Back up and restore your iOS device with iCloud or iTunes

From Tiger to Leopard. And back to Tiger...

hi =)
i was running tiger 10.4.10.
i upgraded to leopard quite smoothly.
then i installed the 10.5.1 update.
all went downhill from there on. i always verify/repair permissions + check HD before and after each installation, in addition to running the extended hardware test.
this evening, i finally gave up on leopard, erased my HD and reinstalled everything from the DVDs that came with my macbook (bringing me back to 10.4.8), as leopard could not install due to the macbook crashing all the time during installation (thank you 10.5.1).
i then ran my bootable clone external harddrive using superduper (thank you for backups!) to erase the HD and clone itself on the HD.
so basically, i am back to where i was before the leopard upgrade, i.e. in 10.40.
no data loss of any kind and all applications have updated smoothly, etc.
question:
considering the hassle experienced with 10.5.1 under leopard, and now that everything is running fine, should i tempt faith with the 10.4.11 update? or wait for the next one?
i might reinstall leopard eventually, as that upgrade went smoothly. it was only the 10.5.1 that created havoc.
thank you for your thoughts =)
dominique

hi barry
and thank you for the message.
i am using a USB modem to connect to the net when in the office, as access to some websites (myspace notably) is blocked on our company network.
these USB modems and their related software proposed here in swizerland are still only compatible up to 10.4.10.
so i might hold off on the 10.4.11 upgrade or going back to leopard until all non-apple applications i use (USB modem + superduper mainly) are compatible.
for superduper, i was manually updating all important files and folders on the lacie eyternal disk, so as not to lose its bootable capacity, which would have been lost by running superduer with leopard.
worked well, but a little time consuming =)
patience is the game sometimes.
dominique

Going from iphone 4 to 3gs and applecare

Hi all,
I have a iphone 4 and bought a iphone 3gs brand new of ebay. Can I transfer my existing applecare from the iphone 4 to the 3gs once activated? I'm going back to a 3gs. I have my receipt and agreement number from when I bought the applecare.
Thanks
Larry1335

The process to transfer Applecare is written in the agreement, from the US Applecare terms & conditions:
Subject to the restrictions set forth below, you may make a one-time permanent transfer of all of your rights under the Plan to another party, provided that: (a) the transfer must include the original Proof of Purchase, the Plan's Certificate and all of the Plan's packaging material, including printed materials and these Terms and Conditions; (b) you notify Apple of the transfer by sending, faxing or e-mailing notice of transfer to Apple Inc., ATTN: Agreement Administration, MS: 217AC, 2511 Laguna Blvd, Elk Grove, CA 95758, U.S., fax number 916-399-7337 or [email protected], respectively; and (c) the party receiving the Plan reads and agrees to accept the Terms and Conditions of the Plan. When notifying Apple of the transfer of the Plan, you must provide the Plan Agreement Number, the serial numbers of the Covered Equipment being transferred and the name, address, telephone number and email address of the new owner.

When I move across my tabs and touch one to change focus to it, it opens in a new window. The tab goes from my list of tabs and is there as an opened womdow

by touching a tab with the mouse pointer it moved from the tab into a new firefox window.The existing tab has gone.So I need to reload it in the original firefox alongside my other tabs. To the best of my knowledge I have not downloaded any new addon. Using firefox 19

Current Firefox versions have a feature called tear-off tabs.<br />
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.<br />
You can drag that tab back to the tab bar in the original window to undo that detaching.
bug489729 (Disable detach and tear off tab):
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

OWA 2013: Insecure Content javascript error in Google Chrome when attempting to launch Edit in Excel from Office Web Apps 2013

I'm unable to launch an excel file in the Client App from OWA using google chrome. I am able to open the excel file in the web application, but when clicking "Edit Workbook" and selecting "Edit Excel" the file never opens.
Opening developer mode shows a javascript error. This error comes back as:
[blocked] The page at 'https://owa.mysite.com/x/_layouts/xlviewerinternal.aspx?ui=en%2DUS&r…g%2Fsites%2Fmiketest%2Ftestlib%2FForms%2FAllItems%2Easpx&wdEnableRoaming=1' was loaded over HTTPS, but ran insecure content from 'ms-excel:ofv|u|https://intranet.mysite.org/sites/miketest/testlib/SitePageVerification.xlsx':
this content should also be loaded over HTTPS.
Both sites are using https, so I'm unsure what the error is about. Any ideas?

Hi Michael,
According to your description, my understanding is that you got an error when you tried to edit excel in client application with Chrome.
Per my knowledge, when you open or edit documents(from SharePoint library) in client application, it requires Open Documents ActiveX controls. Open Documents ActiveX controls limitations on browsers which do not support ActiveX. Currently only 32-bit versions
of Internet Explorer support this functionality. So , for resolving your issue, I suggest you use IE 32-bit.
More indormation, please refer to the link below:
http://technet.microsoft.com/en-us/library/cc263526.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Going from Office 2010 to 2013 and Back to 2010 I lost My Outlook Search

Similar Messages

Maybe you are looking for