Good morning friends, I have a problem with my iphone 4s since I get a screen that just light it says "Activation Required" restored it and not corrected, I bought my factory unlocked iphone, how I can fix this, I had installed the version 6.0 as develope
Good morning friends, I have a problem with my iphone 4s since I get a screen that just light it says "Activation Required" restored it and not corrected, I bought my factory unlocked iphone, how I can fix this, I had installed the version 6.0 as developer to
If you have a beta copy of iOS6
1. You are a developer and will know how to transition from beta
to release version and to use the Develpoer forum
2. You have a pirate copy of the beta and no-one on this Apple hosted Forum can help you
try Google
Similar Messages
-
How I can fix this error message in the Windows Server - kCGErrorFailure: No workspace dictionary?
How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.
You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS -
hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?
hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?
-
Every time I try to download the new version it just says I can not download the new version of Firefox. I keep getting a message that says "Firefox 5.0.1dmg could not be opened, because an unknown error occurred - Try saving to disk first and then opening the file"
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
My G3 power PC, I cannot get the disc drive to open so I can put a disc into it. I sounds like it is stuck. Is there a way I can fix it without taking it in to a repair store?
OK, what you have is an iMac G4 17-inch USB2.0. Good work.
Unfortunately, that model is among the hardest to service at home. Getting one apart is a job of modest difficulty; reassembling it so the heat dissipation system works properly is more difficult. Many have succumbed to heat-related failures following improper reasesembly.
Did you try my suggestion of booting the computer while depressing the mouse button?
When you start the computer can you hear a short sound from the optical drive?
If you put a light fingernail pressure between the tray and the computer case, does anything move?
If you need it serviced professionally, unfortunately Apple considers that model obsolete and will not work on them. You'd need to find an independent repair shop that really knows G4 iMacs. -
I changed my password, and without knowing it, I typed the wrong numbers, and now I don't know my password. I've tried to connect to iTunes, but it doesn't seem to work. It only brings up the USB cable needs to be connected to iTunes on my iPod screen. Does anyone know how to fix this, because it's frustrating.
Thanks!!Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
A couple days ago I first noticed the problem when snapchats would appear on my lock screen but when I opened the app I kept getting the error message that the app was not able to refresh my story. Then the next day I was no longer able to send iMessages, they wouldn't go through and would only reach the second party when I sent them as text messages. Also, YouTube won't load and Mail won't send or receive email. I've already tried restarting my phone but there was no change. At first I thought my network connection was the problem but Instagram, Safari, Vine and Pandora all work perfectly. Any suggestions?
Try this procedure to be sure of a proper restart.
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
I would also try: Settings > General > Reset > Reset Network Settings -
My usernames and passwords are not being saved. I never get the prompt:
"Do you want Firefox to remember the password?"
I've tried the help screens but I can't find the answer. Please let me know how this can be fixed.
Thanks,
Doug ClarkeMake sure that you have set Firefox to remember passwords.
* Tools > Options > Security: Passwords: "Remember passwords for sites"
Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode" -
When I try to download Adobe Flash Player, it says I need to quit out of Safari even when it's closed. How do I fix this?
Apologies for the slightly pedantic answer, but in application terms, "closed" and "quit" are two different things. An application such as Safari can have several windows open, and each of them can be closed using the red button in the corner.
However, even after all windows are closed, the application is still running until you specifically quit it. You can tell it's still running by the small light under its icon in the Dock. If you hold your cursor down on the icon for a few seconds, you should see a pop up menu with the "Quit" option - click that to quit it. Or, click the icon once (this may launch a new window), then either go to the Safari menu and click Quit, or click cmd-Q, to completely quit the app.
Matt -
I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS(Ireally don't remember if it's a 3G or 3GS), iOS 3.1.2. Thanks for your help
please help me!!!
-
I have an iPhone and when I got it, I had a Toshiba laptop. Now I have a MacBook Pro, but when I try to wi-fi sync my iphone and new computer, it doesn't work because on my iphone it is still trying to sync with my old computer. How I can fix this?
Move the content from the old computer to the new computer.
Sync the iPhone via cable to the new computer and enable Wi-Fi syncing.
It should now be possible to sync via Wi-Fi to the new computer. -
I recently got my iphone from AT&T which came with a charger and know the charger says "this cable is incompatible with this iphone and is not reliable" can anyone tell me how I can fix this or what to do?
Contact AT&T to have them replace the cable.
-
Iphone 6 airdrop probleme can't find or connect to my iPhone 5s to share pic, how i can fix this ? at the same time my iPhone 5s no problem with airdrop to share.
hi raz, i don't have problem how to use airdrop , but the iPhone 6 can not find other contact so i can share pic , and i have iOS 8.0.2 on both iphone.and i have the same network .
with iPhone 5s i can share with airdrop and he find my iPhone 6 name so i share and accept pic, but from iPhone 6 i can't do the same. -
I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?
That pretty much eliminates all the user-serviceable parts the phone has.
When you say you purchased a new battery, I'll assume that it included the installation and you did not go fiddling with the nanoscrews and such. So it's got to have some sort of warranty that the part is good and it is time to take it back for service. -
My iphone 4 is completely frozen. Please, any advice as to how I can fix this?
Anyone know what I should do if my iphone 4 completely freezes (screens gone blank now but still glowing), unresponsive to any of the buttons so wont lock on or off. It does not respond when connected with a computer. This has never happen before, so first time issue. No water damage/dropping etc damage has occurred so don’t know why this happen. However, before the screen froze I got a message saying memory is nearly full… I have had this before but was never an issue like this. Please, any advice on how I can fix this?
Hello, Robertwilliamnewman.
Thank you for the question. I would recommend closing all applications in the multitasking menu and then restart the device. Also, check to see how much space is available on the device as this can limit device functionality if it is at capacity. You can check device capacity by going to Settings > General > About.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iOS: Understanding multitasking
http://support.apple.com/kb/HT4211
Also, some e-mail clients are set to convert file format upon sending and this could be the cause of the issue. If this is the case, you would need to refer to the sender to have them correct this in their preferences of their e-mail client.
Cheers,
Jason H.
Maybe you are looking for
-
Ugh! Safari won't open - see error report here
Help...? When I open Safari I get an error saying: "The application Safari quit unexpectedly. Mac OS X and other applications are not affected. Click Reopen to open the application again. Click report to see more details or send a report to Apple." C
-
Pinch to zoom not working properly in Safari 5.1
I have OS X 10.6.8 (downloading lion as i type). I updated safari this morning and ever since I did that, pinch to zoom isnt working right. I can pinch to zoom in, to a certain extent but I can not get as large as I want as I used to and I cannot zoo
-
Oracle Identity Manager 11.1.1.3
Hi, I am trying to upgrade Oracle Identity Manager 9.1.0.1 to 11.1.1.3. But I am unable to find the documentation for upgradation. Could anyone can suggest me how to upgrade OIM 9.1.0.1 to 11.1.1.3. Edited by: Sri Kishore on Aug 10, 2010 4:30 AM
-
FREE GOODS FROM CUSTOMER N VENDOR
hi please give me some idea how free goods from customer and free goods from vendors are managed .please give me the process flow. thanks n regards rn sap mm
-
I accidentally hit auto complete when i was half was through my book and it added loads of unnecesary pages to the back of my book. I have removed all the images. How do I remove all those extra pages?