Good Receipt after Delivery Completion Indicator on

Dear ALL,
In our Client there is a setting that if Delivery indicator Tick is on then the system is allowing the Goods Receipt . I want that if Delv. indicator is on then System should not allow GR.
Please provide the Config setting.
Regards,
Kapil.

Hi
This is a standard functionality  incase PO qty is 100  and you set delivery completed indicator when goods receipt done for  90.then system will still allow receipt of another 10 qty. but not more than that.i.e. total receipt can be 100 only.
But can use user exit to stop further goods receipt after delivery comple indicator is on.
Vishal....

Similar Messages

  • Change Button Not Active even after Delivery Completion Indicator is Remove

    Hi ,
    In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
    Thanks & Regards,

    Hi,
    Please check these notes.
    Note 1267916 - PO item flags do not stay checked
    Note 1174982 - Return/deletion of confirmation does not update the PO flag
    Thanks
    Zameer

  • GR after "Delivery Completed" Indicator was Set and Automatic PO Closing

    Hi All!
    In our system, we can still post goods receipts even if the "Delivery Completed" indicator was already set in the PO. Is there something we need to configure so as not to allow goods receiving for such POs?
    Also, can we set the PO to close automatically after reaching its "Validity End"?
    Please we would appreciate any suggestion for this issues.
    Thanks in advance!

    Hi,
    The Solution is to
    <b>Reduce the PO quantity</b> or <b>the block the item on the PO</b> to prevent any further GR's.
    Block the purchase order item.
    (ME22N: Block pushbutton; ME22 Menu -> Edit -> Block)
    Fill the date field for the 'Latest Possible Goods
    Receipt' (LEWED) in the purchase order item. If you do
    this and you enter a GR document after this date, the
    system issues message M7163, which you must set as an
    error message in Customizing.
    <b>Refer to OSS note - 856279</b>
    Here is the copy
    Number 856279
    Version 3 from 24.06.2005
    Status Released for Customer
    Set on 24.06.2005
    Language EN
    Master language DE
    Short text MIGO: Proposed qty despite 'delivery completed'
    indicator
    Responsible SAP AG
    Component MM-IM-GR-PO
    Goods Receipt from External Procurement
    Regards
    Kedar Kulkarni

  • Goods receipt for Delivery completed PO

    Hi,
    I have issue with a user(Only one user having this issue),who is able to receive the goods for Fully delivered PO.User can receive up to over delivery tolerance given in the PO.How to restrict this.
    Issue is this,
    Purchase Order qty=30 EA
    Over Dely Tolerance=20%
    Received through MIGO=30 EA
    After this also system allowing to receive goods for 20% of the order qty.
    Only one user having this problem.
    By Standard if i receive goods for delivery completed PO, the system will throw a message No selectable items found.
    With regards
    Ram

    Please check Material tolerence limits.If tolerence limit exist change the tolerance limit of material.

  • "Delivery Completed" Indicator in Goods Receipt

    Hi,
    While doing GR, we want to check the "Delivery Completed" on the Goods Receipt Screen if we are expecting no future receipt against the Purchase Order.
    Currently we are not able to check the Delivery Completed Indicator as it is not in editable mode.
    Is there any issue if we enable the Check Box on Goods Receipt Screen. If no, how can we enable the Check Box.
    Please guide.
    Regards,

    Hi
    This is handled by the system automatically. you can change only in purchase order.
    Refer SAP note 1093582 for more info
    About delivery completed indicator functionality
    The purchase order item is considered closed, even though the total
    quantity may not have been delivered.
    o Although a further delivery is not expected, it is still possible.
    o At the time of the next goods receipt, the system suggests the item
    as unselected.
    o The purchase order item can be deleted, even if the total quantity
    was not delivered.
    Although the "delivery completed" indicator is not set, a purchase order
    item is still considered closed if the full quantity has been delivered. In
    this case, the "delivery completed indicator" is not required.
    In Customizing for Inventory Management/Goods Receipt/Set Delivery
    Completed Indicator, you can define at plant level that the "delivery
    completed indicator" is set automatically in the order if:
    o the total quantity was delivered
    o the underdelivery or overdelivery lies within the tolerances
    Hope it helps
    Thanks/karthik

  • Delivery completed indicator not working..

    HI SAP expers,
    some purchase orders not getting chick mark of  Delivery completed indicator ater receiving goods
    i have PO with 100 qty .  then GR 100 qty  .  but its not taking in the purchas eorder
    Delivery completed indicator not check automaticalley. i did all the configuration in spro-mm-inventory-GR-indi  extt...
    most of th ePO or  getting but some POs or not getting.. is there any settings behind MATERIAL MASTER or any .?
    Regards,
    Anthyodaya.

    Try the following config..
    1. Set Delivery complete indicator at plat leve
    spro - mm --inventory mgmt -
    Goods receipt -
    Set delivery complete indicator
    2. COntrol field selection for MIGO to disable users from changing it.
    spro --> Materials Mgmt --> Inventory Mgmt --> Settings for enjoy Transaction --> Field Selection for MIGO
    set field : "Del.Completed" Ind.     GOITEM-MIGO_ELIKZ    to Display

  • PO delivery completed indicator

    Hi All
    I notice that some of my po shows the DCI ticked once the delivery gets completed.but some don't get ticked even the delivery gets completed.Whats missing here?Your input will be appreciated.

    Hi ,
    From your message it seems that the automatic DCI is not set for all the cases.Please check if it so happens for some specific Plant .If so check whether auto DCI is not ticked against that specific Plant .For this go to Spro-MM-Inventory Management & Physical Inventory- Goods Receipt- Set Delivery Completed Indicator . Here check whether all Plants are checked or not.
    Dhruba

  • Delivery completed indicator in MIGO

    Hi all,
      During the goods receipt(MIGO), the indicator "Delivery completed" has three options : set, not set, set automatically. In our client, the default option is "set automatically" which needs to be changed to "set". Please let me know the configuration / master data to be maintained for this purpose.
    thanks & regards
    Chaitanya Rayaprolu

    Hi,
    change the settings under the menu path:
    SPRO > IMG > MATERIAL MANAGEMENT > INVENTORY MANAGEMENT AND PHYSICAL INVENTORY > GOODS RECEIPT > SET DELIVERY COMPLETED INDICATOR.
    here u tick off the indicator.
    regards
    jash

  • MIGO Process order-Delivery completed indicator by default as "2. Set"

    Hi all,
    Can We have the MIGO Process order-Delivery completed indicator by default as "2. Set" instead of Set automatically by any configuration.
    Pls suggest.
    BR,
    Subbu.

    Hello Subbu,
    Go to SPRO --> MM --> Inv Mgmt & Physical Inv --> Goods Receipt --> Set "Delivery Completed" Indicator
    Deselect the "Delivery Completed" indicator for your Plant. Then go back & do the MIGO and check.
    Hope it will help.
    Regards,
    Anup

  • NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

    I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
    F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
    THANKS/

    Hi Malka,
    It's possible set the system to mark automatically the delivery completed indicator.
    First you need to set the under delivery and over delivery tolerances.You do this in customizing:
    Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
    Once you set this, you can insert this value keys on Material Master Record for the materials.
    When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
    In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
    In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
    You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
    You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
    Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
    Regards,
    Rodrigo

  • No create Plant button at the Set "Delivery Completed" Indicator" config

    Dear Gurus,
    I would like to do the configuration to set the Delivery Completed indicator. Therefore, I went to the following menupath:
    SPRO -> Materials Management -> Inventory Management and Physical inventory -> Goods Receipt -> Set "Delivery Completed" Indicator"
    The problem is, I can't find the button to add Plants. Is there even one in the first place ? If yes, where is it ? If no, why not ?
    Currently, the only Plant that I can see over here is 0001 - Plant 0001. The delivery completed checkbox is ticked.
    Please take note that all the Plants have been setup and the system has Gone Live.
    Thanks.

    Hi ,
    It seems that the plant is not configured properly.Anyhow u can create ur own at  the following path.
    Spro-MMInventory Management and Physical InventoryPlant Parameters
    Set all the indicators applicable to that plant for IM.
    Regards
    Ramesh Ch

  • What is the pre-requisite of getting  delivery completed indicator in PO

    Hi ,
    I we have done complete GR against a PO item still delevery completion indicator is not set for this material in PO,
    Is there any other condition to be fulfllled to get this indicator?
    we don not have any over delivery tolerance .
    Thanks in Advance
    Anand

    Hi,
    Based on the under delivery tolerence ( if set ) or if Receipt Qty = your ordered qty then system will set Deleviery completed indicator.
    Before that please check in config, whether to automaticlly set delivery completed indicator is activated. ( below given the path )
    IMG-Material Management-Inventory management and Physical Inventory-Goods Receipt- Set Delviery completed Indicator
    Regards
    Rewrard Points if useful

  • Delivery Completed indicator for PO of Services

    Hello everyone!
    The PO for materials/goods has a delivery completed indicator in the Delivery tab of the Item Detail. But if the PO is for Service, we can not find a delivery completed indicator. Does the system have a counterpart of that indicator for Service items? We need to get this for our customized report to indicate whether a service has already been received completely or not.
    Thank you.

    hi,
    I think you get the Final entry indicator for SES documents...
    Now if you want the IR shd be created first before the completion of the entry...then its always better to do firstly IR doc and then SES document...
    I am saying this because, as per your requirement yuou don't need to check the service procured, but only wanna pay...
    But as per my suggestion this is not the right way..you shd firstly check the services done and then only you shd pay...
    Think abt it...
    Regards
    Priyanka.P

  • Delivery Completed Indicator under Goods Receipt tab in COR2 to be hidden

    Dear All,
    I want to hide Delivery Completed Indicator under Goods Receipt tab in COR2.
    Is it possible with configuration?

    you may try to create screen variant with tcode SHD0
    there are many threads on how to use shd0

  • Delivery complete indicator set by partial goods receipt in kanban orders

    HI Experts,
    we recently upgraded to ECC 6 DIMP EP 6. Now for kanban production orders delivery complete indicator is set for partial goods receipt. Under delivery tolerance is zero. Is there any notes available for this issue. Manual production order goods receipt is fine.
    THanks
    RIjil

    Hi,
    Let me try and understand your scenario better. You have a production order triggered by KANBAN. You then do a GR via inventory management of a partial quantity. Would you then GR the remaining quantity?
    The reason I ask is because this is KANBAN production, the bin being filled multiple times for the same trigger does not sound right. The system behavior of not expecting further deliveries (by setting delivery complete) seems appropriate.

Maybe you are looking for

  • Setting Up Shared Development Environment

    Is there any diagrams, white papers, guides or best practices on setting up the J-Developer and connecting to shared Services and database? The Developer guide (E10148.pdf) does not really cover what the standards is or the overall infrastructure of

  • Kernel Protection Failure

    Beware of Kernel Protection Failure and Kernel Panic! In certain third party software kernel goes into a panic. This also seems to be an issue with Software update Mac OS X 10.4.8. When I installed the software update things started acting up with my

  • Query - Replacement Path for a Customer Exit Variable

    Hi New to the field and the board.  Any and All help is greatly appreciated. I have created a query which runs based on a date selection. The query have few customer exit variables whose values are set in ABAP. All Key Figures in the query are brough

  • Re: ABAP knowledge in SAP BW

    Hi guys & girls, Am trying to try apply for jobs..but before, am in preparation stage and am stuck at ABAP. Since most of the offers are asking for ABAP knowledge..so being a BW'er i beg for ur advise on the following- 1.) What topics should i be cov

  • Error Message on Flash Update

    While trying to install an update for Adobe Flash I recieved this error. I can't seem to find anyone to help with this. There aren't any email addresses etc that are available. the following is the exact error message I recieved. I haven't had proble