Good receipt with reference to outbound delivery document

Hello Gurus,
Could someone please help with the following scenario?
Article 1234 has base unit of measure pc, altenative measure box, 1 box = 12 PC
In the purchase order (stock transfer order from one site to another site) 4 box of article 1234 is ordered. Outbound delivery created with reference to the above purchase order (stock transfer order) has quantity of 4 boxes (this is copied from PO). And then an transfer order is created with reference to the above outbound delivery and quantity requested is 4 boxes (copied from outbound delivery), but in the transfer order confirmation the confirmed quantity is 14 pcs (this is now confirmed with base unit of measure). And now if we check the outbound delivery doc, the confirm quantity is 14 pcs (1,167 box )
But when creating good receipt with reference to the outbound delivery document, the quantity confirmed is now 14.004 pcs (this is calculated with unit of measure conversion table, i guess). But actually good receipt quantity should be 14 pcs instead of 14,004 Pcs!
What can we do in order to have 14 pc in good receipt?
Thanks in advance for your great help.
Br, Ailleen

Hi,
Thanks a lot for both of your answers. But if is there a way to receive 14 pcs instead of 14.004 pc although the system did the right calculation according to the conversion rules!
But in this case the supplying plant has issued 14 pcs but receiving plant has received 14,004 pcs and now there is discrepancy! Is there some enhancement or user exit could fix the situation or do I have to change the coding in order to solve this problem!
Thanks again for you helpful advice!
Br, Ailleen

Similar Messages

Find a bapi for Creates a Goods Receipt with correspond to Inbound Delivery

hi expert!
exist a bapi for tcode:MIGO_GR ( Goods Receipt with correspond to Inbound Delivery)
i know one bapI BAPI_GOODSMVT_CREATE can Creates a Goods Receipt,
but i can't know to use it to Creates a Goods Receipt with correspond to Inbound Delivery.
or other bapi exist for MIGO_GR?
Best Regard!

Hi Vatcan,
Chek the Inbound Delivery 1st weather you refer the right PO in it
You can also chek in PO i
1 Me23n Go to confirmation tab here you can see the Inbound delivery quantity
2 Chek which reference document you recived the goods, (i.e You recived the goods with reference to PO or Inbound delivery)
2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods

Goods Receipt using Inbound Delivery with reference to Outbound Delivery

Here is our scenario that we need help finding a solution:
1. Multiple Intracompany POs created
2. On the confirmations tab of the POs, we have u201CInbound Deliveryu201D Selected because the items need to be received in with Handling Unit management.
3. We have the Order Combination box checked on the shipping tab to allow 1 delivery to be created for multiple purchase orders.
4. We create only 1 Outbound Delivery for only available items on various purchase orders.
5. Due to being handling unit managed, we need to receive the items using an inbound delivery.
Problem: We need to find a solution to easily enter an outbound delivery number which will allow us to receive only the parts that were shipped (issued), via the inbound delivery process.
If we remove the confirmation control key, we can complete a Goods Receipt for Outbound Delivery in MIGO u2013 but is there a way to complete a goods receipt using an inbound delivery with reference to an Outbound Delivery?
Thank you for the help.

Hi,
You can work with Inbound delivery created via IDOC Triggered from Outbound Delivery, this will carry the HU Data as well. Please refer this wonderful note, which will explain you a lot of things, Note 1119073 - FAQ: Automatic inbound delivery creation for stock transfers
There are other notes also available for Inbound delivery creation with HU in STO, please browse the notes, if you find any difficulty.
Regards
Chandra Shekhar

Good Receipt with reference to delivery or stock transfer order

We have a stock transfer order between two plant. Requirement is as under.
Steps - Supplying plant is creating stock transfer order, doing delivery with reference to STO by VL10B.
Receiving plant is doing Good Reference with reference to delivery or STO t code MIGO.
Now the requirement is if A Plant is supplying 100 nos, at the receiving plant it should not allow less then 100 nos. it should give error that qty is not match with delivering qty.
Thanks in advance
Samir Bhatt

HI,
You mean to say that STO quantity must be equal to GR quantity or else system should throw an error
After STO and delivery PGI is done.
Then GR is made with refernce to STO.
Regards
KK

Goods Receipt w.r.t Outbound Delivery with HU-STO

Hi All,
We are doing STO Process with Handling Unit.
When doing GR w.r.t outbound delivery, we select Via.Hand.Units and execute then we enter into it and select the HU and click and copy.Then item OK and Save.
Upto here its fine.
When i save the GR,it is giving the Inbound Delivery no. I want to know how this inbound delivery is generating in background when i save the GR.
Kindly help me.
With Regards
Azeez.Mohd

Hi Attila,
Appreciate yor reply.
The problem is that for one of my client it is generating the inbound delivery when we do GR w.r.t outbound delivery via HU.
But when iam trying do the same scenario for other client it is not generating.
I have maintained same config w.r.t that client even though i am unable to get the inbound delivery for GR w.r.t outbound delivery via HU.
What might be the problem? where i need to check?
Kindly help me.
with regards
Azeez.Mohd

Problem in posting the goods receipt with reference to the inbound delivery

Hi All,
Below is the explanation of the scenario:
1. Materials are purchased (PO created in CAS as order unit) and inbound delivery document is created in cases as well.
2. When the TO is created for put away (we are performing put away using the hand held devices) the line item is split resulting in new line item number created
3. When the TO is confirmed the del quantity on the split line item is zeroing out and as a result the system is treating it as a service item with zero del quantity and is stopping from performing the GR with respect to the inbound delivery document
And also the inbound delivery is disappearing from the confirmation tab on the PO)
This is happening only with the materials which have an alternate unit set up in the material master (in this scenario CAS is the order unit and JAR is the base unit of measure)
Can some one help fix this?

Hi,
There is no standard option available and I don't think that there is any feasible way of stopping this without the use of a user exit (as already suggested).
But even the user exit option would be complex because it would have to block off the PO number field after enter (or any other key) was pressed.
It would also have to stop the use of multiple entries via the "find" option.
If you have a valid reason for doing this, have you thought of trying to get your users to do as they are told instead of changing the system?
Why is it important to have one PO per GR ?
Steve B

Issue in Goods Receipt with respect to Inbound Delivery

Hi Gurus,
We have a scenario where goods receipt (Migo) is done based on inbound delivery.
i have created a PO for 10 Qty..
i have done inbound delivery for 10 qty
In actual GR (MIGO) only 8 qty is received and i posted it. whether the actual qty received will be updated in inbound delivery.
please note GR will also be done in EWM.
Please let me know if any standard config is required.

Hi Vatcan,
Chek the Inbound Delivery 1st weather you refer the right PO in it
You can also chek in PO i
1 Me23n Go to confirmation tab here you can see the Inbound delivery quantity
2 Chek which reference document you recived the goods, (i.e You recived the goods with reference to PO or Inbound delivery)
2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods

Goods receipt not possible for outbound delivery...error code 4

hi ,
i created a stock transfer order.
an outbound delivery was created.
pgi was done..
gr was done against this delivery.
but this gr was then cancelled.
now when i am doing gr against this outbound delivery.
i get this eror message.
Goods receipt not possible for delivery 1134930096: error code 4
i have then reversed PGI of this delivery in vl09.
then did PGI again.
but still same error message.
please help.
regards
shashank

Hi,
When system gave you the message with the error code 4, you can click on the message.
There may be various reasons for the error of GRn agaist delivery -
1) GRN already posted against the Delivery
2) Delivery is deleted
3) Delivery is currently processed by another user
System gives you the detailed analysis aling with the codes. You can check what reason is mentioned for reason code 4.
Regards,
Prashant

MIGO PROBLEM in the Good Receipt with reference to purchase order

Hello Everybody.
i m getting one problem with reference to MIGO tcode.
Might be anyone notice or not but i want to share with you.
in MIGO selected goods receipt then beside it ask for the different actions.
I use the purchase order no.
suppose i given po no 1
enter
now it will display the details of that po number (1) but at the same time po number field is again in the input mode and you can give more po number .
suppose now i have given po no 2.
enter
Then in same gr we will be having the item details of both po number( 1 & 2) .
This is my problem .I want to make restriction that in single gr it should take only one po number not more than that ,after giving one po ,it should make that field in display mode.
How to do that please guide me .
I will be grateful to you.
Thanks a lot

You can use a field exit on any field that gets filled when the first PO is entered
check that field (Something like challan Number , Delivery date)
if is if filled use the "screen" Table to make the PO Number field Display only .

Create Inbound Delivery with reference to Outbound Delivery

Hi Team,
Can anybody describe the process needed to be able to Create an Inbound Delivery with reference to an Outbound Delivery.
Also, can the whole inbound delivery creation process be automated?
Thanks.

Inbound Delivery can be created wrt :
Purchase order
Shipping notification
Customer return
and
Outbound Delivery can be created wrt:
Goods shipment based on a sales order
Stock transfer order
Goods return (to the vendor)

Inbound delivery with reference to outbound delivery

Guys,
Is it possible to create inbound delivery in reference to a outbound delivery. Can it be created with GN_DELIVERY_CREATE,
Regards
Jiku

Re: Create Inbound Delivery from Outbound Delivery create
Re: Inbound/Outbound Delivery
Reward points if it is useful...

Excise duty not determined in goods receipt with reference to PO.

Dear All,
I am implementing Condition based CIN. I have created PO and maintained all excise duties in XK11 transactions. Excise duty has determined in PO. But When I am creating MIGO with reference to PO the excise duty is not copied from Purchase order.
Please suggest.
Thanks & Regards

Dear All,
If you have any idea, Please let me know.
Thanks & Regards

Goods receipt with reference to Purchase Order

the requirment is that we should be able to restrict the one Goods receipt posting for one Purchase order. The standard system is supporting processing of multiple P.O's of different vendors in on GR.
could anybody suggest to configure the functionality
regards

Hi,
There is no standard option available and I don't think that there is any feasible way of stopping this without the use of a user exit (as already suggested).
But even the user exit option would be complex because it would have to block off the PO number field after enter (or any other key) was pressed.
It would also have to stop the use of multiple entries via the "find" option.
If you have a valid reason for doing this, have you thought of trying to get your users to do as they are told instead of changing the system?
Why is it important to have one PO per GR ?
Steve B

Create Goods Receipt with an Inbound Delivery

Hi,
Can you anybody help me, how to create a Goods Receipt with correspond to Inbound Delivery.
Which FM or BAPI avaliable for this. Anybody did it before please pass to me with details?
Thanks in Advance
Cino C B
Edited by: Cili on Feb 11, 2008 8:19 PM

Check BAPI_GOODSMVT_CREATE
Look at the documentation if you want to make a goods issue or a good receipt for purchase order or production order, etc.
Inbound delivery only means is going to enter the plant (ie. mvt 101)

Creating goods receipt with refernce to PO number using BAPI_GOODSMVT_CREAT

Hi Gurus,
I have a requirment where in, I need to create a goods receipt with reference to a PO number which has been created by BAPI_PO_CREATE1, using another BAPI BAPI_GOODSMVT_CREATE. How can I do this? what are all the values that I need to fill in GOODSMVT Create BAPI.
Please help its very urgent... Need to submit by EOD.
Thanks,
Suma

hi
hope this code will help you,.
Reward if help.
REPORT ZRICH_0001 .
Structures for BAPI
DATA: GM_HEADER TYPE BAPI2017_GM_HEAD_01.
DATA: GM_CODE    TYPE BAPI2017_GM_CODE.
DATA: GM_HEADRET TYPE BAPI2017_GM_HEAD_RET.
DATA: GM_ITEM    TYPE TABLE OF
                 BAPI2017_GM_ITEM_CREATE WITH HEADER LINE.
DATA: GM_RETURN TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.
DATA: GM_RETMTD TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
CLEAR: GM_RETURN, GM_RETMTD. REFRESH GM_RETURN.
Setup BAPI header data.
GM_HEADER-PSTNG_DATE = SY-DATUM.
GM_HEADER-DOC_DATE   = SY-DATUM.
GM_CODE-GM_CODE      = '04'.                                " MB1A
Write 971 movement to table
CLEAR GM_ITEM.
MOVE '412'                 TO GM_ITEM-MOVE_TYPE     .
MOVE 'Q'                 TO GM_ITEM-SPEC_STOCK.
MOVE '3800533484' TO GM_ITEM-MATERIAL.
MOVE '1'     TO GM_ITEM-ENTRY_QNT.
*MOVE 'PC'    TO GM_ITEM-ENTRY_UOM.
MOVE '1060' TO GM_ITEM-PLANT.
MOVE '0007' TO GM_ITEM-STGE_LOC.
*MOVE '0901'   TO GM_ITEM-MOVE_REAS.
MOVE 'P203601001' TO GM_ITEM-WBS_ELEM.
MOVE 'P203601001' TO GM_ITEM-VAL_WBS_ELEM.
APPEND GM_ITEM.
Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
     EXPORTING
          GOODSMVT_HEADER = GM_HEADER
          GOODSMVT_CODE    = GM_CODE
     IMPORTING
          GOODSMVT_HEADRET = GM_HEADRET
          MATERIALDOCUMENT = GM_RETMTD
     TABLES
          GOODSMVT_ITEM    = GM_ITEM
          RETURN           = GM_RETURN.
IF NOT GM_RETMTD IS INITIAL.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ELSE.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ENDIF.
WRITE:/ GM_RETMTD.
LOOP AT GM_RETURN.
WRITE:/ GM_RETURN.
ENDLOOP.
check the BAPI_GOODSMVT_CREATE.
Functionality
You can use this method to create a material document for a goods movement.
You can only create one material document each time you call up the method.
You can use a simulation function before posting the goods movement to check how the data is updated in the database. The standard system is configured so that the goods movement is posted immediately without simulating beforehand.
Ensure that you transfer the data in the same way as it is run in the database, for example,
Material number 18-figure with leading zeros
Batches with uppercase letters
Note that for all transactions/events listed below, the posting date is entered in the header data of the material document. In the BAPI2017_GM_HEAD_01 interface, fill the PSTNG_DATE (import structure GOODSMVT_HEADER) field.
Notes
Authorization check check
In the MM Inventory Management component, the method does not execute any authorization checks.
Note that during a posting of a goods movement, depending on the business transaction of the system, authorization objects of other applications can also be checked.
Transfer
The following information about the material document that is to be created is transferred to the method:
a structure with header data
a structure with the code for the movement
a table with the item data
a table with the serial numbers
The posting is carried out in the SAP R/3 via the MB_CREATE_GOODS_MOVEMENT function module.
Confirmations
Messages are returned in the Return parameter. The parameter documentation shows the return codes and their meanings.
Further Information
The method can only carry out your function if no error messages were generated in the Return table. This is the case if the header data and all the items were processed successfully.
Transaction control is not implemented. The calling program therefore has to execute the Commit Work itself after this method has been successfully called (in other words, if no errors were reported in the Return parameter).
Which fields have to be filled during the various transactions/ events?
The following sample scenarios demonstrate which fields have to be filled for which business transactions/events (code).
There are the following types of transactions/events:
1. GM_Code 01: Goods receipt for purchase order
2. GM_Code 02: Goods receipt for production order
3. GM_Code 03: Goods issue
4. GM_Code 04: Transfer posting
5. GM_Code 05: Other goods receipts
6. GM_Code 06: Reversal of goods movements
7. GM_Code 07: Subsequent adjustment to a subcontract order
Entering the movement indicator
Depending on the transaction, you must enter the following in the movement indicator:
GM_Code 01 (Goods receipt for purchase order): B
GM_Code 02 (Goods receipt for production order): F
For all other transactions, you leave the field blank.
For 1: GM_Code 01: Goods receipt for purchase order
Purchase order known
The following fields have to be filled:
Purchase order
Purchase order item
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry or
quantity proposal
The following fields may have to be filled in some cases (incomplete listing):
Shelf life expiration date (if it has been configured like this in the system)
Reason for movement (if it has been configured like this in the system)
Batch (if the material is handled in batches and batch numbers are not assigned automatically)
Storage location (if a storage location has not been specified in the purchase order item)
The following fields can be filled (incomplete listing):
Stock type
Item text
Unloading point
Delivery completed indicator
You cannot fill the following fields (incomplete listing):
Account assignment fields (account assignment is adopted from the purchase order)
Reservation
Receiving/issuing material
Receiving/issuing plant
Receiving/issuing storage location
In the case of a purchase order item with the "subcontracting" item category, only the GR item in the interface is to be transferred. The system automatically determines GI items.
Purchase order unknown: Shipping notification known
The following fields have to be filled:
Delivery
Delivery item
Movement type
Other fields, such as those under "Purchase order known". The system determines the relevant purchase order item via the delivery/delivery item.
Purchase order unknown: Purchase order should be created automatically
The following fields have to be filled:
Material number
Plant
Storage location
Vendor
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
The following fields may have to be filled in some cases (incomplete listing):
Shelf life expiration date (if it has been configured like this in the system)
Reason for movement (if it has been configured like this in the system)
Batch (if the material is handled in batches and batches are not assigned automatically)
The following fields can be filled (incomplete listing):
Stock type
Item text
Unloading point
You cannot fill the following fields (incomplete listing):
Account assignment fields (automatic creation of purchase order items with account assignment is not supported)
Reservation
Receiving/issuing material
Receiving/issuing plant
Receiving/issuing storage location
Purchase order unknown: A purchase order should not be created
The following fields have to be filled:
Material number
Plant
Storage location
Vendor
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
The following fields may have to be filled in some cases (incomplete listing):
Shelf life expiration date (if it has been configured like this)
Reason for movement (if it has been configured like this)
Batch (if the material is handled in batches and automatic assignment of batch numbers is not set)
The following fields can be filled (incomplete listing):
Special stock indicator
Item text
Unloading point
Goods recipient
The following fields cannot be filled (incomplete listing):
Account assignment fields (automatic creation of purchase order items with account assignment is not supported)
Reservation
Receiving/issuing material
Receiving/issuing plant
Receiving/issuing storage location
Receiving/issuing batch
The input combinations listed above for the GM_CODE 01 can be combined within an input table so that they can be posted in a material document. Items can also be posted for different purchase orders, provided that all the purchase orders refer to the same vendor.
Transfer of subcontracting components
During the posting of the ordered material of a subcontract order with movement type 101, for the transfer of the subcontracting components, the filled unique identification of the document line (LINE_ID) is also required.
More information on LINE_ID and PARENT_ID
The following fields have to be filled for the components:
Unique identification of the document line
Identification of the immediately superior line
Material number
Plant
Storage location
Quantity in unit of entry
The following fields can be filled for the components:
All other fields in the method that are included in this list.
The following fields cannot be filled for the components:
All fields that are not included in the list above. The movement indicator must be initial.
Additional fields in goods-receipt-based invoice verification
When you post a goods receipt to purchase order with movement type 102, an issue with reference to a previously posted goods issue, the following fields must also be transferred:
REF_DOC_IT (LFPOS): Item of a reference document
REF_DOC (LFBNR): Document number of a reference document
REF_DOC_YR (LFBJA): Fiscal year of a reference document
Only when you transfer these fields is it guaranteed that the reference to the original goods movement stay the same.
For 2 GM_Code 02: Goods receipt for production order
The following fields have to be filled:
Order
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry or
quantity proposal
The following fields may have to be filled in some cases (incomplete listing):
Shelf life expiration date (if the system has been configured like this)
Reason for movement (if the system has been configured like this)
Batch (if the material is handled in batches and automatic batch number assignment is not set)
Storage location (if storage location has not been specified in the order)
The following fields can be filled (incomplete listing):
Order item (co-product)
Stock type
Item text
Unloading point
"Delivery completed" indicator
The following fields cannot be filled (incomplete listing):
Account assignment fields (the account assignments are adopted from the purchase order)
Reservation
Receiving/issuing material
Receiving/issuing plant
Receiving/issuing storage location
Receiving/issuing batch
For 3 GM_Code 03: Goods issue
Goods issue without reference to a reservation
The following fields have to be filled:
Material number
Plant
Storage location
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
The following fields may have to be filled in some cases (incomplete listing):
Special stock (e.g. sales order, project, vendor etc.)
Shelf life expiration date (if the system is configured like this)
Reason for movement (if the system has been configured like this)
Batch (if the material is handled in batches and automatic batch number assignment is not set)
Account assignment fields
The following fields can be filled (incomplete listing):
Special stock indicator
Item text
Unloading point
Goods recipient
The following fields cannot be filled (incomplete listing):
Reservation
Receiving/issuing material
Receiving/issuing plant
Receiving/issuing storage location
Receiving/issuing batch
Goods issue with reference to a reservation
The following fields have to be filled:
Reservation number
Reservation item
Record type of the reservation
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
The following fields may have to be filled in some cases (incomplete listing):
Shelf life expiration date (if this has been configured in the system)
Reason for movement (if this has been configured in the system)
Batch (if the material is handled in batches and automatic batch number assignment is not set)
Storage location (if not planned in the reservation)
The following fields can be filled (incomplete listing):
Special stock indicator
Item text
Unloading point
Goods recipient
The following fields cannot be filled (incomplete listing):
Movement type
Material
Plant
Account assignment fields
For 4 GM_Code 04: Transfer posting
Transfer posting without reference to a reservation
The following fields have to be filled:
Material number
Plant
Storage location
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
The following fields may have to be filled in some cases (incomplete listing):
Receiving material
Receiving plant
Receiving storage location
Receiving batch (if material is handled in batches and you want to change batches)
Receiving/issuing special stock (e.g. sales order, project, vendor etc.)
Shelf life expiration date (if this has been configured in the system)
Reason for movement (if this has been configured in the system)
Batch (if the material is handled in batches and automatic batch number assignment is not set)
The following fields can be filled (incomplete listing):
Special stock indicator
Item text
Account assignment fields (for automatic posting lines: Expense/income from stock transfer)
The following fields cannot be filled (incomplete listing):
Reservation
Transfer posting with reference to a reservation
See goods issue with reference to a reservation
For 5 GM_Code 05: Other goods receipts
Other goods receipt without reference to a reservation
See goods issue without reference to a reservation
Other goods receipt with reference to a reservation
See goods issue with reference to a reservation
For 6 GM_Code 06: Reversal of goods movements
You can use the Cancel method to reverse goods movements. But you may also want to cancel a goods movement without referring to a material document (see the Cancel method).
If you want to work without referring to the document, you have to fill the field BAPI_GM_ITEM_CREATE-XSTOB in the interface (import table GOODSMVT_ITEM). In this case, the system converts the movement type assigned in the interface to the reversal movement type. Alternatively, you can set the reversal movement type in the interface. In this case, the BAPI_GM_ITEM_CREATE_XSTOB field must be transferred blank.
If you want to cancel a goods movement with reference to a reservation (without using the Cancel method) you can only transfer the field BAPI_GM_ITEM_CREATE_XSTOB if it is filled. Movement types are not transferred when you post with reference to a reservation, as the movement type is contained in the reservation item.
For 7. GM_Code 07: Subsequent adjustment to a subcontract order
Ordered material of subcontract order
The following fields have to be filled:
Unique identification of document line (can be assigned to anything)
Posting date in document header
Document number of purchasing document
Item number of purchasing document
Material number check
Plant check
Movement type (select movement type 121)
Movement indicator (must be O)
Further entries are not allowed. The entry quantity for the ordered material of a subcontract order must be zero.
Components
The following fields have to be filled:
Unique identification of document line (can be assigned to anything)
Identification of the immediately superior line
Plant
Material number check
Quantity in unit of entry; can also be negative
The following fields can be filled:
Storage location
All other fields in the method that are included in this list.
The following fields may not be filled:
All fields that are not in the list above. The movement indicator must be blank.
More information on LINE_ID and PARENT_ID
Additional fields in goods-receipt-based invoice verification
When you post a subsequent adjustment, the following fields must also be transferred:
REF_DOC_IT (LFPOS): Item of a reference document
REF_DOC (LFBNR): Document number of a reference document
REF_DOC_YR (LFBJA): Fiscal year of a reference document
Only when you transfer these fields is it guaranteed that the reference to the original goods movement stays the same.

Good receipt with reference to outbound delivery document

Similar Messages

Maybe you are looking for