Good starting point for simulations

Hi,
I am looking for a good starting point for system simulations in Labview.
books and bookmarks are welcome. These simulations will include linear
differential equations.
Your help is greatly appreciated.
Greetings from Germany.
Henrik
---------------------------- Corinna & Henrik Volkers
[email protected]
| | |
__|._.__|._.__|._.____________________ beeeeeeeeeeeeee...
| | |

[posted and mailed]
[email protected] (Henrik Volkers) wrote in
>Hi,
>I am looking for a good starting point for system simulations in Labview.
>books and bookmarks are welcome. These simulations will include linear
>differential equations.
>Your help is greatly appreciated.
>Greetings from Germany.
>Henrik
>
There is a chapter in "LabVIEW Power Programming" by Gary W. Johnson,
McGraw Hill.
There is the simulation toolkit from NI; www.ni.com
Alexander C. Le Dain, PhD
ICON Technologies Pty Ltd
http://www.icon-tech.com.au
* The LabVIEW FAQ http://www.icon-tech.com.au/thelabviewfaq.html *

Similar Messages

Looking for a good starting point for the HR module

Hello,
Can someone please send links to help/blogs which will be a good starting point for the HR module?
Thanks,
Roy

Regarding Payroll configuration
https://forums.sdn.sap.com/click.jspa?searchID=8283334&messageID=4763364
follow wht our gurus has said

Wikis - a good starting point for portal information...

The recently announced Wiki functions of SDN will, over time, be a great source of information about portal development and implementation...
The main wiki portal page is [https://wiki.sdn.sap.com/wiki/display/EP].
Please read this first before asking a question in the forum - believe me, there are not many new questions being asked!
There is quite a bit of repetition in forum questions, and maybe if people are directed to the wiki page as a first step, it may make it easier to watch this forum.
The Wiki concept is all about sharing within a community, so feel free to modify the content - more accurately 'our' content - and maybe start some other pages, such as one about modifying logon pages - a fairly consistent topic in this forum

Hi Michael,
I am new to Basis. I am getting difficulty to get answers for Bais problems from sap forum.
If you can provide some useful links (like you provided for portal development ) , it will be helpful for me.
Also suggests is there any special forum category or platform to post Basis related problems.
Thank you.
Regards
Mahesh

Can someone point me to a good starting point

Hello:
I have to look into implementing the TV middleware for ATSC/NTSC digital TV with path for future migration to MHP and OCAP. I was wondering if anyone knows of a good starting point for implementing the specifications. I am also looking at the JavaTV API.
Can anyone point me to some good FAQ's, starting points, etc.
Any help is much appreciated.
Sanjay

Well, at the risk of blowing my own trumpet, there are some tutorials at http://www.mhp-interactive.org which will hopefully give you an overview. These are mainly related to MHP and JavaTV, but maybe some
ATSC stuff will appear on there sometime in the future.
There's also the forum on the official MHP web site at http://forum.mhp.org/ that may be useful for MHP-related stuff.
Hope this helps,
Steve Morris,
Webmaster, www.mhp-interactive.org

Help with starting point for "proof of concept" integration

We are a third party application provider and are attempting to figure out how to do a "proof of concept" integration with SAP. We are not looking for "certification". Our product does not appear to fit any of the standard certifications for integration and our experience integrating with other systems indicates that no two integration will be identical.
We are looking to do a simple integration scenario with an SAP system so we have some basic experience doing it, can say 'Yes" when asked if we have done it, and can create a video showing a transaction being done in SAP and our system also updating (and ideally the reverse).
Our starting point with respect to SAP knowledge is "0".
Our basic task list (we think) goes something like
1. Figure out the version and modules of SAP with which we should be integrating
2. Get access to an SAP system (do we rent, is there a developer/evaluation, ...)
3. Put some data in the test system (is there a "sample data" set?)
4. Figure out the SAP transactions that map to the business process in which we are interested (moving goods in and out of a distribution center/ware house - are there some "standard business process guides")
5. Integrate (we are a .NET web based application so we are guessing this means use the ".Net Connector")
Could anyone point out any resources (white papers, links, people, places to find people,...) that might be a good starting point?
Thanks,
John

Athol,
We are looking to recieve notifications out of SAP as tractor trailers at a dock are filled as proof on concept. The actual integration scenarios we do are more complex and do not match well with any of the pre-packaged certification scenarios. The real world integration scenarios actual vary substantially from customer to customer in terms of the integration points between systems.
As we have become more marginally knowledgable about SAP, I think we will end up receiving and sending "IDOC" messages from SAP but have no idea what those IDOC messages are or where to start looking for what a "standard" (if there is one) message SAP would generate in reaction to whatever the "trailer is loaded" transaction is.
To figure out what the transaction is, I assume we need to identify what version of SAP we should be targeting for a simple integration. Are there any could references on what the commonly integration methods are and to which versions they apply?
Something like "hey, if you do an integration with a IDOCs in with SAP Netweaver 2004 then that would good proof you could integrate with 90% of the installed SAP base". Of course, any links explaining what the versions of SAP are and where they are in there lifecycle and what people are actually using would be helpful.
John

Good Starting Point

Hi All,
As i have a requirement of showing the map with a client place in it(the client place of my organization should be marked well in the map), how to show all the client place of my organization in google map.
Can i have a good starting point of it.
How to proceed with this.
Whether i need to refer all these locations from the table
Regards,
Mini

Hi whielm,
Thanks for that useful link.
i downloaded the plugin botoka google map which is suitable i suggest so
for that i created a plugin region invoking botoka map and under the sql statement i have given the following query which suits my requirement but it doesn't seemed to work
SELECT e.address1
FROM   apps.hz_parties a,
         apps.hz_cust_accounts b,
         apps.hz_cust_acct_sites_all c,
         apps.hz_party_sites d,
         apps.hz_locations e,
         apps.fnd_territories f
WHERE       1 = 1
         AND a.party_id = b.party_idSince it is asking to give three columns for the query, i also tried by giving
e.address1, null, null
But it is throwing error like the column alias to be unique.
or is there anyother suitable plugin is available inorder to show the location of my client in the map(more clearly).
Regards,
Mini
Edited by: Mini on May 24, 2011 1:16 AM

Starting point for Java Me

What is a good starting point to learn java me for someone who has only done java at college.
I am interested in developing forms on a mobile phone and saving data to the record management system.
Tutorials or documents on the web would be appreciated.
Thanks
Some Guy :)

just google :)

Anyone recommend a good starting point?

I am a self taught geek, started in the trenches (trouble shooting the owners computer when I was a bartender) and built my knowledge up to the point an Analyst II position was created for me.
My knowledge is mostly in software though and I am now trying to teach myself server administration. Ive always had great experience with TechNet but Im still a baby on the server side and I'm finding the information more in depth than Im ready
for.
Can anyone suggest a good starting point? On here or elsewhere?
Any Help Appreciated!!!!!!

Pluralsightt has released free training series for Windows Server 2012
http://blog.pluralsight.com/free-computer-training-videos/free-windows-server-2012-videos
You can also find training videos at Channel 9.
http://channel9.msdn.com/Tags/windows+server
I hope these will be helpful for you to get start.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

I need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a hard drive.

i need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this subject but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a external hard drive.

If the file was not originally from iTunes, you'll need to redownload it from it's original source or rerip it from the CD. Files can sometimes go bad and become corrupted. As to how or why that happens, there are a number of ways.
What format are the problematic tracks in? Have you tried converting them to another format in iTunes?
iTunes: How to convert a song to a different file format
B-rock

Starting Point for GSS

We are going to deploy GSS in a DC-DR scenario. Primary role for this GSS would be for failover when DC becomes unavailable. As of now, we are not planning to make these GSSes as an authorative servers for Domain names.
My question is How GSS should be configured. I've gone through pdfs explainng how GSS works and KAP-AL with other GSS, ACE etc. However, I am not able to completely understand about its IP addressing, physical connectivity (most likely, this would be outside firewall) and more details about GSS-ACE deployment. We are going to have ACE appliances in Primary DC as well. There will be no ACE appliance in DR.
Any guidance about starting point for GSS deployment would be helpful. I was also looking for questions to be asked for client requirement gathering.
THanks in advance. Happy 2012 !

just google :)

Default starting point for a search? Stopping a Finder Search?

"Command F" brings up a search window, defaulted to "This Mac". All too often, I forget to switch the search to my intended target before entering the search criteria. I've got several TB of storage on line, so a "This Mac" Search can take a l-o-n-g time. I can't find a way to stop this search once it's started. Is there a way to set a preference for Find to default to the selected item (disk, folder, or whatever) rather than the whole computer? Am I missing a "cancel" button somewhere?
Peri

Backspacing or deleting the search criteria does not work. Once the beach-ball cursor starts spinning, nothing I do has any effect until the search is complete - which may be several minutes.
On 10.4, there was is an "x" at the lower righthand corner of the search window (next to the search indicator), which would cancel the search. There is no "x" on 10.5.
Saving a search might be an answer if I repeated the same search frequently, but I don't. Also, I'd have to remember to use the sidebar. If I could remember that, I'd probably could also remember to change the starting point for the search.

Custom starting point for song?

I'm wondering if it's possible to set a custom starting point for a song, similar to the way that the end point can be set:
I find that I have to start my song about two measures in (I tend to need more time than the Count In setting allows), but when I go to share the song, I don't want those first two measures. Short of highlighting all tracks and dragging them left when I'm done, is there another way to set a custom start?
Thanks!
Andrew

theolog wrote:
when I go to share the song, I don't want those first two measures
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)

A starting point for pipemenus in Openbox

Does anybody know of a good "hello world" pipemenu written in python or bash? I'd like to get started with making my own pipemenus, but I'm having a hard time looking though some of the pipemenus on the Openbox website. I just need a nice clean one to look at for a starting point. Thanks.

Hi kiwisaotome,
The idea is to make a script that creates an xml form at the time when it is called, which the openbox menu can use. It's fairly easy. Here is an example that I use. I don't remember where I got it from:
#!/bin/bash
FREQ=`cpufreq-info -p | awk '{print $3}'`
echo '<openbox_pipe_menu>'
if [ $FREQ = 'powersave' ]; then
echo '<separator label="Powersave"/>'
else
echo '<item label=" Powersave">'
echo '<action name="Execute"><execute>sudo cpufreq-set -g powersave</execute></action>'
echo '</item>'
fi
if [ $FREQ = 'ondemand' ]; then
echo '<separator label="Ondemand"/>
else
echo '<item label="Ondemand">'
echo '<action name="Execute"><execute>sudo cpufreq-set -g ondemand</execute></action>'
echo '</item>'
fi
if [ $FREQ = 'performance' ]; then
echo '<separator label="Performance"/>'
else
echo '<item label="Performance">'
echo '<action name="Execute"><execute>sudo cpufreq-set -g performance</execute></action>'
echo '</item>'
fi
echo '</openbox_pipe_menu>'
Then I call it from the openbox menu.xml where it first is declared or what ever it's called:
<menu execute="~/.config/openbox/scripts/cpufreq-pipe.sh" id="system-cpu-menu" label="CPU Governor"/>
And then called:
<menu id="system-cpu-menu"/>
Hope that helps.

Start point for EHS

Hi All,
I am new in EHS and I would have a look at it. Would you please share with me any start point (Link, document and so on) if you have? How and from where should I start?
I found just a book on Amazon but unfortunately it was out of stock
Thanks in advance,
Omid

Dear Omid
I have only shortly googled to get ideas about SAP HCM. I am sorry to say that I was not able to detect any overlap to SAP EHS solution; SAP EHS does have "only" some interface to SAP HR. So your starting position in EHS is "not very good". But that should not hinder you to consider SAP EHS as a potential interesting future option. If you drill down this FORUM you will find many similar examples. That means consultants from SAP FI and othere areas are interested as well in learning SAP EHS.
Only some short feedback regarding:
"EHS can affect MM or SD procedures"; this is a link in both directions. To use SAP EHS (for some purposes) you need to link SAP EHS and SAP MM; SAP SD is linked to SAP EHS mainly in the area of SDS/MSDS distribution and Dangerous goods handling; but other integration options do exist as well.Check may be:
Substance Volume Tracking using SAP EHS MANAGEMENT
Examples of Integration of SAP EHS Management into other SAP Solutions
The main integration points are quite good explained here::
Environment, Health and Safety (EHS) - SAP Library
and here:
Extension 5.0 for SAP EHS Management – SAP Help Portal Page
The topic of training / certification etc. is mentioned as well in document: "SAP EHS Management for Beginners".
E.g. SAP FI etc. links to EHS are discussed here: Error
or here: EHS : Waste Management ( Why PO is created)
As SAP EHS is a "big" module it is nearly impossible to give you additional guidelines. The main "hint" is: Component Extension solution is getting now a "hype"; therefore mans project seem to come up; SAP EHS classic is "old" to a certain extent; in most case there is only the need to prepare "small" changes and I assume most chemical companies using SAP do use SAP EHS since years and the REACH and GHS hype is "over" to a certain extent. Clearly on regular basis changes are needed; but no real "big projects"
So if you are interested in SAP EHS you should may be check "Component Extension" solution. Here the link to SAP HR is "very" closed (as we talk about Incident and risk handling for persons etc.
C.B

A good starting point.....

Hi ,
I think the doc located at the following link:
http://www.oreillynet.com/pub/a/network/2003/11/10/oracle_spatial.html?page=1
is good enough as a starting point .... in order to be understood easily and quickly some 'difficult' concepts , notions of Spatial data....
Regards,
Simon

I recommend that you use the Sun Tutorial here http://java.sun.com/docs/books/tutorial/
It has detailed instructions and will expose you to some of the details of Java that you will sooner or later have to learn.
Using NB is ok, as long as you use it in an intelligent manner. That is, don't use it as a crutch, to hide the guts of Java from you - you'll never learn Java that way. Use it when it helps you do something, not because it'll do something for you that you can't do for yourself. Be aware that using an IDE will incur a greater learning curve, as you have to learn both the IDE and Java. I recommend using Nb only as a program editor until you are somewhat proficient in the basics of Java syntax and language rules.
In my experience, there's very little said here that relies on knowledge of other languages - other thatn general programming concepts. What you're seeing is probably just that.

Good starting point for simulations

Similar Messages

Maybe you are looking for