Goods Issue against Reservation (Error in MB1A)

Hi All,
While doing Goods Issue (MB1A 261 Mov type) against Reservation for Production Order, even if Reserved qty and entered qty is same, we are getting the error message "Entered Qty is more than Reserved Qty for material".
But for that particular material , in CO03, in Component Overview, different line items are there with different batches. So in reservation list, with same reservation number, different line items are there for that particular material having different batches. But in MMBE, for each batch, stock is available
Please help to resolve this issue.
Regards,
Rosh

Dear Rosh,
What is the error message that you are getting?post the error no and class,just double lcik on the error message and check the
diagnosis for the same error message.
Are the components batch managed materials?check in CO03 in the top menu>goto>documented goods movements,check
whether already some goods movements has been performed
Check and revert
Regards
S Mangalraj

Similar Messages

Goods issue against reservation with interchangeable part using MB11/MIGO

Hi
Do anyone know how to make a goods issue against reservation with interchangeable part using MB11/MIGO.
Meaning reservation is made with Part A, goods issue is make with Part B (interchangeable to part A).
Enhancement pack 4 is having some issue with MB1A, we are attempting to do a work around with MB11 / MIGO.
Please assist.
Thanks!!
Regards,
Clarice

You can view report from MB25 ,it will gives you reservation list with reference network number.
Select option in MIIGO as GI > Reservation > Mvt.281. or you can make the entry from MB1A with Mvt .type-281
Regards,
Sandesh Sawant

POST GOODS ISSUE AGAINST RESERVATIONS

Dear All,
I want to restrict the goods issue against the manual reservations.
Logic:At the time of goods issue against the reservation system should check stock in hand(unrestricted stock)-all previous reservations.
Eg:suppose unrestricted stock is 50kg
Reservation 1 for 20 kg
Reservation 2 for 30 kg
Reservation 3 for 40 kg
Reservation 4 for 10 kg
When i do goods issue for Res :3
System should check Uns Stock(50kg)-Previous Res(20kg+30kg)
give error message stock insufficient.
Waiting for the expert comment.
Kind Regards,
Sankar T

Hi
   Let me tell you with that logic reservation works.
While creating manual reservation, system checks whether material is available on specified date or not. In case material is available then system will allow to reserve the material otherwise not.
    Now take your case, if you have made following reservations
1) 20 Kg
2) 30 Kg
3) 40 Kg
4) 10 Kg
This means against each reservation material will always be available for particular reservation (because no one can issue particular material by any other means)
Now suppose in unrestricted use 50 kg of material is available and you want to issue the material against reservation No 3 then system will issue material from reserved material (Not from the un restricted use)
   This means the logic which you want to use is already applied by SAP in one step before (while creating reservation) so need not to apply same logic once again.
   and if you still want to use this logic , you take a help of ABAPer , he only can help you in this mater
Reward if helpful

How to stop excess goods issue against production order from MB1A

Hi Gurus,
In our organization goods issue against production order is done by using MB1A T.Code manually.Due to this reason sometimes excess quantity of RM issue against production order.Now I want to stop the excess goods issue against production order by using MB1A but I want to mainatain a certain tolerence.
Please advice what to do?
Regards
Nirmal

Hi ,
Use user exit MBCF0002
This is called when u do goods movement for production order.
Regards,
Vishal

G/L account issue when goods issue against reservation

Genius,
I manually created a reservation with movement type 201 and a G/L account which is difference from one defined in OBYC GBB-VBR.
When I post goods issue by MB1A, I got the account from OBYC; But when I post it by MB26, I got another account maintained on reservation.
Did someone encounter the same issue? Thanks for your reply.
Binary

Hi,
Check the document and in the layout in the accounting document you can able to see the Transacation type i.e GBB and also which it appeas. You can also see the GL Accounts.
Revert back for clarification.
Thanks and regars.
S.Subbiah.

Goods issue against reservation from multiple batchs,

Dear Friends,
My material is active for batch management at material level, When I do Goods receipt sytem generates unique batch no for the quantity of goods receipt,
Goods is issuied against reservation, if reservation quantity is more than batch quantity then i have to issue material from to differnt batches for that i have issue material from first batch and then i have to issue materil from second batch, so multiple goods issue has to done for one reservation,
Can anybody tell me how to issue material for a reservation from multiple batches at a single transaction, please suggest,
With regards,
ARABBAS

Hi,
Use MB26 for good isse against resevation.
Regards

Account Detrmination for Goods Issue against Order

Dear All,
We have a requirement where goods issued against reservation created through plant maintenance order should hit repairs & maintenance account instead of default account such as consumption stores and spares.
Can any changes be made in configuration so that the default account can be changed either while saving plant maintenance order or can the default be overwritten when material is issued through MB1A against reservation.
Useful answers will be rewarded with points
Regards
Milind Nair

Dear
Your knowldge iam adding the points
In materail master check the Valuation class 4 digits (ex: 2010)
is assigned in material master . The same material will be used in many places , this valaution class depends Production created by Fi.
This same will have assigned in G/L at OBYC t code. Here we assign as automatic posting. The same G/l account has given as automatic posting in G/L t code FS00.
In obyc has many process example for goods issue it will come as BSX. costing difference PRD.
your materails type is ERSA these types may bes used many plcaes other than Pm . If clinet interests you can assign valuation class with seperate G/l account for PM
All the G/L , costing docuemnts will appear while doing migo (mb1a) 261 movements as per your obyc seetings
Tell requirements with FI/MM

Error in posting Goods Issue wrt Reservation

Hi experts,
System gives following error while posting Goods issue wrt reservation
Message No - M7093
Fld selectn for mvmt type 261 / acct xxxxxx differs for Fund (xxx)
Then, I checked following things
1. RM07CUFA (SE38) report shows that
"fund" field in Mvt type 261 field selection control is OPTIONAL ENTRY
"fund" field in G/L acct xxxxxx field selection control is HIDDEN
2. In OMJJ, i did not find field " fund " for Mvt type 261
In OBC4, i did not find field " fund " for a/c xxxxxx (group Z012)
How to resolve the problem?
rgds,
jay

Thanks for your reply.
In SE38 , I run Program RM07CUFA with Movement type 261 and Company code and GL account.
Here it shows Fund field selection controls are different in Mvt type & G/L account
But,there " fund" field is not displayed to change its field selection control , neither in Mvt type nor in GL a/c.
pls help me out
Regards.
jay

Dump while doing goods issue against order with movement type 261

Hi Team,
We are integrating Asset management process along with the goods issue against the order which is created with a business partner for movement type 261.
when we try to complete the process the system gives us a dump as described below.
please look through the dump and advice for the same.
Short text
    The current application triggered a termination with a short dump.
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
Error analysis
    Short text of error message:
    System error in the FI/CO interface
    Long text of error message:
     Diagnosis
         Updating of the FI/CO interface was called with object type "MKPF"
         yet the checks were run for object type "AMBU".
     System Response
         Checking and updating must be for the same object type.
     Procedure
         It has to do with a system error from the calling applications.
    Technical information about the message:
    Message class....... "RW"
    Number.............. 103
    Variable 1.......... "MKPF"
    Variable 2.......... "AMBU"
   Variable 3.......... " "
   Variable 4.......... " "
rigger Location of Runtime Error
   Program                                 SAPLMBWL
   Include                                 LMBWLU21
   Row                                     62
   Module type                             (FUNCTION)
   Module Name                             MB_POST_GOODS_MOVEMENT
46    IF xmkpf-xabln IS INITIAL.                               "note 434093
47        CALL FUNCTION 'MB_XAB_NUMBER_GET'.                   "note 434093
48    ENDIF.                                                   "note 434093
49
50 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
51
52 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
53    CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
54         EXCEPTIONS
55           error_message = 4.
56 * As soon as we have started to put things into UPDATE TASK, we must
57 * ensure that errors definitely terminate the transaction.
58 * MESSAGE A is not sufficient because it can be catched from
59 * external callers which COMMIT WORK afterwards, resulting in
60 * incomplete updates. Read note 385830 for the full story.
61    IF NOT sy-subrc IS INITIAL.
>>>       MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
63                  sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
64 *     MESSAGE A263.
65    ENDIF.
66 * Optische Archivierung
67 * Spaete Erfassung mit Barcode
68 * Redesign of barcode handling -> note 780365
69   PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
70                                          xmkpf-mjahr
71                                          barcode.
72
73   MOVE-CORRESPONDING xmkpf TO emkpf.
74   CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
75     EXCEPTIONS
76       error_message = 4.
77    MOVE-CORRESPONDING xmkpf TO emkpf.
ource Code Extract
ine SourceCde
32 *    BKPF as well. There is no other way to forward XBLNR to FI as not
33 *    every document is posted by MB_CREATE -> a new function module in
34 *    MBWL for transferring the information, called by FI, meant to load
35 *    the complete function group for all MBxx postings when this isn't
36 *    required (Performance). Would be the better way to transport the
37 *    information after switching off MBxx in later release.
38 *    corresponding IMPORT ... FROM MEMORY ... can be found in
39 *    AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40      l_mem_id = 'MKPF-XBLNR'.                                   " 641365
41      EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id.             " 641365
42    ELSE.                                                        "1245374
43      l_mem_id = 'MKPF-XBLNR'.                                   "1245374
44      FREE MEMORY ID l_mem_id.                                   "1245374
45    ENDIF.

Couple of notes are mentioned (385830, 780365 etc) and check whether these notes are applied. If so, check with the ABAPer and go through the source code corrections explained in the respective notes.
You may also go through the following notes
1) Note 386656 - FBV4: RW103 'System error in the FI/CO interface'
2) Note 388316 - RW103 "System error in the FI/CO interface"
3) Note 543463 - Inconsistent Posting in budgetary ledger and/or RW102/RW103
thanks
G. Lakshmipathi

Post a good issue against an outbound delivery with movement type 601 K

Hello,
according to my business scenario I need to manage the stock of different vendors into the client's location (plant) at storage location level and I need to post the good issue against an outbound delivery to decrease the stock level.
Since the owner of the goods isn't my client the item is managed only at quantity level (not value) so I'm not interesed in the accounting document.
To do it I'm using the functionality related to the vendor consignment stock but I'm not able to post the good issue against an outbound delivery using the movemement type 601 and the special stock indicator equal to K.
In particular I've tried in two different ways:
- setup the consignment stock indicator (= K) into the sales item category, but when I post the goods issue the system is not able to find out the right vendor
- to create a stock determination rule instead of the setting previous described, but the system display an error message (Fld selectn for mvmt type 601 / acct L534200770 differs for Cost center (010) ) even if the accouting is not relevant in my scenario
Can you suggest me how the system has to be setup in order to cover my requirements?
Thanks in advance,
Alessandro

Hi,
Please clarrify which material type you are using in this scenario? I suggest you to use material type UNBW (no value updation will be there) and create a material master. Use special stock indicator K. Proceed with 601K to do GI. Hope it works. Thanking you.

Creating Issue against Reservation

Dear SAP Gurus,
While creating Goods Issue against the reservation the system through the message M7 181 only O Quantity availble.
But if i see the actual quantity through MMBE the system shows the actual quantity which is there in PRD server.
Can any one give me immediate reply highly appriciated
Thanks,
Alam.Sivakumar

hi
Though stock is available pls. check whether availability check is active for that material or not...may be the available stock is reserved for another reservations
u can check list of reservation in MMBE
check reserved column--Shift+F6 will give u list of reservations
Vishal...

Posting multiple goods issues against the same delivery

Hello gurus,
We are a fashion apparel company using ECC 6.0 and would like to know if it is possible to post mutliple goods issues against the same delivery?
I will explain the business requirement.
- We create a stock transport order to deliver 400 units of merchandise to on or our retail stores (STO is created and processed to a delivery).
- This information is passed down to our warehouse management system (which is not SAP)
- Our warehouse management system has the ability to split a delivery into multiple shipment when needed. For example, our warehouse may only be able to complete 250 units for our morning shipment and will therefore pick, pack and post this. This will feed back into SAP and process a 641 movement so that the units now show as "in transit". This is needed so that our stores can process the ASN and move the units into their inventory when they receive the merchandise later that day.
- During the afternoon, our warehouse will process the remaining 150 units and will ship this to our store later in the evening or next day.
Currently, we are not able to process another goods issue against a delivery as we close out the delivery during the first goods issue. We would prefer not to have to generate a new delivery for our DC and let them continue to process against the same delivery, but we are unsure how to configure this.
Any help or guideance would be extremely appreciated
Thanks in advance

Hi RJ,
First of all sorry to write such a lengthy reply,In one line if i want to summerize then it is not possible with standard SAP however we can achieve this by writing some piece of code in both the system
AS - IS
               Business process
          From business process point of view you are right that once the pick & pack is in process it is not advisable to create a new delivery document for balance quantity and share the same with WMS as then they have to create a new document in WMS and start picking based on that rather then the old delivery document number. if i am in your position then i can give a thought like this
e.g.
Delivery                                                  - 100 Unit
Shipment confirmation from WMS            -   60 Unit
Change in delievry quanity / Pick qty        -   60 Unit
Invoice from SAP                                    -   60 Unit
Second confirmation from WMS                          -   40 Unit
Change in the existing delivery quantity                -   Now here we have two option either
1) Change the delivery quantity / Pick qty to (60+40) =100 or
2) Remove the 60 and update 40 as delivery and pick quantity
Pros & Cons
if you will select option 1 then furhter invoice will happen for 100 unit which is incorrect as physically you are shipping only 40 unit
if you are selecting option 2 then the document flow is incorrect as you don't have history(in SAP) for the 60 unit which was shipped earlier
Solution ::
so in my opinion the best option is to create a seperate delivery document (store the old delviery number in one of the field of the new delivery and pass the same to custom segment of the IDoc) transmit the IDoc to WMS write the validation logic in WMS
Find the record with old deliver number in the WMS system, check the status whether it is active or inactive
if it is acitive Validate the Material + qty with the WMS record(Material + balance quantity) if both are same then pass the new deliery number to custom field of the WMS table
At the time of confirming back to the SAP, Write a piece of code in SAP that if the incoming idoc custom field(new delivery number) field is populated then ignore the orignal document number and post the document using the new delivery document number
Hope this help

Goods Issue against outbound delivery from blocked stock

Dear All
I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
Please let me know any solution for this.
Thanks and Regards
Satish Kumar

Hi
Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
http://scn.sap.com/thread/1541911
Thank$

ABC Analysis of Planned Consumption(Issue against Reservation).

Hi Experts,
Is there any standard report is available for ABC Analysis of Planned Consumption(material issued against Reservation)?
thx in advance...

Hi,
I allready tested with Tcodes such as MC.9 (gives details of total & unplanned consump. not for Planned consump.) & MB51(gives details for only one Mov. Type say either 261 or 262 not possible to do ABC ana. for balance of both)
Is there any other std report as ABC analysis of planned consp.
Thx in advance...

Restrict Goods Issue for Reserved Stock

Hi Experts,
My requirement is to restrict goods issue of stock qty which is reserved.
For that i have created checking rule and assigned to MIGO_GI because we need to consider only reservation .
Now when i create manual reservation system gives msg as per config.
e.g current unristricted stock is 100 qty
manual reservation created for 10 qty
System gives msg if i issue material more than 90 qty. It is working properly
Now pb is system is not considering reservation created by process order confimation.
I already assing checking rule with Checking grp for availability check and also set properties.
in include dependant reservation i set - x - Include all reservations.
I need to restrict goods issue for reserved stock for reservation created by process order.
Thanks in Advance
Janak

Hi Janak,
When a reservation is created automatically or manual, it will depicts the requirement of the material for the specific department/process. BUt it doesnot restrict or label the material as reserved. This is because the acutal requirement/consumption may vary from the reserved quantity. Also the stock still remains in the un-restricted stock and hence its open to be issued.
Now if you want restrict the stock for automatic reservation, then you can make an enhancement wherein the stock is moved to required stock type. But this will block the stock for the order even if it is not required.
Regards

Goods Issue against Reservation (Error in MB1A)

Similar Messages

Maybe you are looking for