Goods issue to customer without sales order or Outbound delivery

Dear all gurus,
I have a case like that: Supposing we don't have neither Sales Order nor Outbound Delivery (because not implement SD, for eg).
Then, we stil want goods issue to customer. So can u advise me how to do: which Tcode, which movement type,...
Thanks,

Hi,
Create a cost center for customer and issue the goods with respect to this cost center in MB1A transaction using movement type 201.
Then all the issues will be tracked based on this cost center.
Regards,
Bharat

Similar Messages

Good Issue date in the Sales order should 1 day difference from the MBDAT

For the particular customer, i want to have difference of 1 day in between the material availability date & good issue date in the schedule line. As per standard i can't made any changes in route and shipping point. Suppose material availability date in sales order is 22.09.2010 than my good issue date should be 23.09.2010 in the sales order. Any body having any idea how can we handle this case and what are things we need consider impact of this change.
Regards,
Srinivas.

Hi,
I think you can easily enable this in Route scheduling /Delivery scheduling. You have to maintain the load time and pick/pack time as the total of 8hours. If this is done, then after material availability date, one more day will be added and the final day will be considered as GI date.
If you dont want to do this, you only have to enable this by Z by using a user exit where you can add one day to the MBDAT and update that in GI date.

BAPI to post a Goods issue with relation to Sales Order?

Hi Everyone,
After creating a delivery order, I need a BAPI to automatically post a goods issue for this DO.
I tried using BAPI_GOODSMVT_CREATE but it returns the message 'Goods Movement not possible with mvmt type 601'.
Any advice?
Best Regards,
Junwen

Hi John,
My data are as follows:
GOODSMVT HEADER:
PSTNG_DATE: 30.09.2004
DOC_DATE: 30.09.2004
REF_DOC_NO: had tried 1014000359 or empty
GOODSMVT_CODE: 03
GOODSMVT_ITEM:
MATERIAL: HP0121002
PLAN: 1010
STGE: 10FG
BATCH: BATCH1
MOV: 601
CUSTOMER: 180017
ENTRY_QNT: 1
ENT_UOM: PC
ENT_UOM_ISO: PC
DELIV_NUMB: 1014000359
DELIV_ITEM: 000001
From your feedback, it is possible to use the BAPI to create a goods issue for movement type 601?
Best Regards,
Junwen

Goods issue without sales order

Hello experts,
                   1) Goods issue without sales order (movt type 251) in T.code "MB1A"*
                           Accounting entry:- Change in stock of Fin. Goods A/c    Dr.
                                                                      To Stock of Fin. Goods A/c
                   2) Customer Invoice through T.code "FB70"
                         Accounting entry:-     Customer A/c   Dr.
                                                             To Sales of Fin. Goods A/c.
We are temporarily not implementing SD module, i am entering Sales transaction data. Are the above two accounting entries correct in respect to "Goods Issue" and "Customer Invoice" ?
Regards
Ashwin

Thanks a lot, but if you could please tell me what impact will on the balance sheet? will the stock be reduced after goods issue
For eg;
         Change in stock of F.G A/c Dr.    200
                       To Stock of F.G A/c               200
         Customer A/c Dr.     200
                 To Sales of F.G       200.
Is this correct? and i have assigned cost center to "Change in stock of Fin. Goods.
Ashwin

Without sale order Delivery creation

Hi,
I want some help to make the delivery creation without sale order.This is my scenario
->>>Two RAW material(ROH) then make the PO and GRN.
->>>Then Created the Finished Material(FERT)
->>>Production order creation
->>>Production order Confirmation(261,531movement)
->>>Stock received(Finished Material)
->>>Make the delivery without order ref
->>>Delivery type(LO-Delivery w/o ref)
->>>Ship to party(Here only we are mentioned the Customer)
->>> save the delivery
When i make the POST GOODS ISSUE (PGI) the following error appear
Message no. NA KI235
Account 315002 requires an assignment to a CO object
You have not defined a CO account assignment for an account that is relevant to cost accounting.
System Response
Account 315002 is defined as a cost element.
This means that you must always specify a CO account assignment.
Procedure
Enter one of the following CO account assignments
Order
Cost center / cost center/ activity type
Sales order item (for a project or cost relevant)
Project / WBS element
Cost object (Process manufacturing)
Network/ Network activities
Business process
Profitability segment
Real estate object
The posting row affected is 000, account 315002
Kindly help in getting resolve of this error.
Regards,
T.Murugu

Hi Murugu,
Please go through the link given below. Hope it helps,
http://www.sap-img.com/financial/requires-an-assignment-to-a-co-object.htm
Regards
MT

Billing without Sales Order

Hello All,
I would like to know, Is it possible to generate a billing document from the system without a sales order or a delivery. If so how can i do that because my client wants to be able to generate an invoice for their customer without having a sales order.
Thank you.

Hi,
Yes we can create billing document without any refernce.
use BAPI_BILLINGDOC_CREATEMULTIPLE.
We are using this BAPI, we are able to post billing document without any reference.
Billing is happening in external systems, and we are uploading those billing documents into SAP.
Goto SE37, enter BAPI_BILLINGDOC_CREATEMULTIPLE press F8.
Pass the values in BILLINGDATAIN table. salesorg,DC,division, Document type, ORDBILLTYP is 'FX' . sold-to party, material,qty and other informaion.
Maintain pricing information in CONDITIONDATAIN table. enter condition type and condition value.
E.g PR00 100,
Select Newline for second condition type. maintain another condition type and value. Go back
Execute it .
You will get document number in success table.

Sales office authorization check in customer master,Sale order and billing

Hello Experts
We need to restrict authorization for customer master, sale order and billing based on sales office.
Can somebody guide me how to activate this ? Has anyone of you have successfully done that?
Regards
kumarlib

Hello Kumar,
User authorization is within Basis expertise, but if you want to get some feel for what authorization objects are take a look at trans SUIM. But basically how it works is for a given transaction the level of check is specified -- in this case Sales Office. Based on values stored in that field the user is allowed or not allowed transaction access.
So you determine whatever the needed matrix is for authorization restriction (i.e. user A can access Sales Office xxx, user B can access Sales Office yyy & so on). Also give Basis the transaction codes to restrict, along w/the technical table/field for each (like from customer master - KNVV-VKBUR, from sales doc level VBAK-VKBUR). Basis sets up the authorization object w/assignments to the users accordingly.
This is standard SAP & your Basis support should be familiar with it. Good luck.

Goods Receipt with respect to sales order

hi,
goods receipt with respect to sales order ,that sales order is prepared with reference to quotation
erroer is
Account assignment cannot be carried out because of different origin no.
Message no. V1134
Diagnosis
The sales document to which you want to refer is based on sales document 20000005 and item 000010. Therefore, the settlement and possibly inventory management are carried out using the number of the preceding document.
System Response
This entry is not allowed.
Procedure
Enter the document and the item number of the preceding sales document

Hi,
Refer the sales quotation number for GR instead of the sales order number.
Regards,
Ravi Kumar C.

Goods Issue with reference to Purchase Order

Hi MM Gurus,
Is there any settings to do Goods Issue with reference to Purchase order?
I want to capture the material price in purchase order during goods issue instead of standard price or moving average price.
Thanks in advance
Dinesh

Hello Dinesh,
Batch valuation is similar to split valuation. Here is the link on how batch valuation works.
http://help.sap.com/saphelp_47x200/helpdata/en/25/283db54f7811d18a150000e816ae6e/content.htm
Please check in sandbox environment before using.
Hope this helps.
Regards
Arif Mansuri

Goods Issue to Customer not done

Dear All,
We have customize service module. We can select Return, Goods Issue to Customer, Inventory Transfer activity from activity tab on Service call itself.
Problem is..first i have return material from Customer , then i have transfer inventory from branch whs to repair center whs and now i like to issue material to customer after repairing.
When i am doing Goods issue to customer, it is giving error i.e. Inventory falls below minimum level.
Can any body guide me for this.
Warm Regards,
Chintesh Soni

HI Chintesh,
Check out whether in the item master you have selected " Manage Inventory By Warehouse" and whether you have maintained the stock figure in the Required (Purchase UoM) field,the Minimum and the Maximum field in the items rows. In the Required (Purchase UoM) field the system displays the quantity needed to keep the stock at the minimum level.
The system:
1. Issues alerts when the quantity goes below the minimum (Release Stock Below Minimum Level in Document Settings must be selected)
2. Does not let you enter stock documents when stock reaches maximum quantity
Nagesh

Wht r the standard tables for vendor customer and sales order report/

Hi wht r the standard tables for vendor and customer reports and is how in normal we cannot use them for vendor reporting and etc ?

Hi
Customer is related to Sales Module
So for a customer we fetch the reports of Sales orders , Deliveries and Billing doc's
CUstomer and Vendor related tables with important fields:
KNA1: Customer Master-General(KUNNR,NAME1,LAND1)
KNB1: Customer Master(Company Code)(KUNNR,BUKRS,PERNR)
KNC1: Customer Master Data (Transaction Figures)(KUNNR,BUKRS,GJAHR)
KNVK: Customer Master Contact Partner(PARNR,KUNNR,NAME1)
KNVV: Customer Master sales data(KUNNR,VKORG,VTWEG,KDGRP)
KNBK: Customer Bank Details(KUNNR,BANKS,BANKL,BANKN)
KNVH: Customer Hierarchy (HITYP,KUNNR,VKORG,VTWEG,SPART)
KNVP: Customer Master Partner Functions(KUNNR,PARVW,KUNN2)
KNVS: Customer Shipment data(KUNNR,VSTEL,TRANS)
KNVI: Customer Tax data(KUNNR,ALAND,TATYP)
LFA1: Vendor Master-General (LIFNR,NAME1,ORT01)
LFB1: Vendor Master(Company Code)(LIFNR,BUKRS,PERNR)
LFC1: Vendor Master (Transaction Figures)(LIFNR,BUKRS,GJAHR)
Sales related Tables for a customer
VBAK: Sales Document(Header Data) (VBELN, KUNNR)
VBAP: Sales Document(Item Data) (VBELN,POSNR,MATNR,ARKTX,CHARG)
      Enquiry, Quotation, Sales Order are differentiated based on Doc.
      Type(VBTYP field) in VBAK,VBAP Tables( for Enquiry VBTYP = A,
      for Quotation 'B' & for Order it is 'C'.)
LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
      (LIPS-VGBEL = VBAK-VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK: Shipment Table (Header Data)(TKNUM)
VTTP: Shipment Table (Item Data)( TKNUM,TPNUM,VBELN)
      (VTTP-VBELN = LIKP-VBELN)
VTFA: Shipping Document Flow(TKNUM,VBELV,VBELN)
VTPA: Shipping Partners data(VBELN,PARVW,KUNNR,PERNR)
VTTS: Stages in Shipment(TKNUM,TSNUM,TSTYP)
VTSP: Transport Stage/Shipment Item Allocation(TKNUM,TSNUM,TPNUM)
VEKP: Handling Unit: Header(Packing)(VENUM,VSTEL)
VEPO: Handling Unit: Item (Packing)(VENUM,VEPOS,VBELN)
VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
      (VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
      Apart from these tables there are lot of other tables which starts with
      V, but we use the following tables frequently.
VBUK: All Sales Documents status & Admn. Data(Header)(VBELN,VBTYP)
      VBTYP= C(Sales Order) VBTYP=J(Delivery) VBTYP=M(Invoice)
VBUP: Sales Documents status & Admn. Data(Item)(VBELN,POSNR)
VBEP: Sales Doc. Schedule Lines Data(VBELN,POSNR,EDATU,WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN,ZTERM)
VBFA: sales document flow data(VBELV,VBELN,POSNV,VBTYP)
VBPA: Partner functions Data(VBELN,PARVW,KUNNR,LIFNR)
VEDA: Contract Data(VBELN,VPOSN)
VEDAPO: Contract Data(VBELN,VPOSN)
Vendor related MM tables
EBAN-- Pur.Reqn. Data (BANFN,BNFPO,BADAT,MATNR)
EBKN-- Purchase Requisition Account Assignment(BANFN,BNFPO,VBELN)
EINA- Purchase Info.Record (General Data)(INFNR,MATNR,LIFNR)
EINE-- Purchase Info.Record (Pur.Orgn Data )(INFNR,EKORG)
ELBK-- Vendor Evaluation Header Data(LIFNR,EKORG,KLASS)
EKKO-- Purchase Order Data (Header)(EBELN,BSTYP,BSART)
EKPO-- Purchase Order Data (Item)(EBELN,EBELP,MATNR)
       RFQ and PO are differentiated by Doc Type(BSTYP)in EKKO table.
       For RFQ it is A and for PO it is F.
MKPF-- GRN Data (Header) (EBELN,BLDAT,BUDAT,XBLNR,BKTXT)
MSEG-- GRN Data (Item)(MBLNR,BWART,LIFNR,MATNR,EBELN)
       Apart from this there are lot of tables which begin with 'M'& 'E', but we
       use the following very often.
EKBE--PO History Data (EBELN,EBELP,BELNR,BLDAT,MATNR,VGABE)
EKBZ--PO History with delivery Costs(EBELN,BELNR,LIFNR,XBLNR)
EKET--Schedule lines data of a PO (EBELN,EINDT,SLFDT)
EKES--Vendor Confirmations Data(EBELN,EBTYP,EINDT,XBLNR)
Reward points if useful
Regards
Anji

COPA : Drive Item Category from billing doc. / without sales order

Dear All ,
I need to drive item category directly from billing document ( billing without sales order - POS inbound doc. )
i tried to drive it from table VBRP but the derivation failed as table VBRP need the billing doc. number & i can't get it from COPA
POS does not create any sales order , the in coming inbound doc. create billing directly ( billing type : FP ).
Edited by: Ahmed Hassan on May 25, 2011 2:28 PM

Hi Jat
This is not the screen I am looking for .Please go to condition tab and look for Analysis .Let me know on what excess you are looking system to find your pricing .
Below are are reference for u.
Regards

Reg.MRP Run without sale order

Dear Experts
We are in need of MRP run without sale order. I have created Finished product material (T-Shirt) and assigned components to that and then I ran MRP, If I do so, MRP is exploded but result is not satisfied some non components are displayed.
What is my requirement is ,when I run MRP if there is stock availble production order should be created otherwise Material requirement has to created.
Pls help what is the configuration for MRP run,
Thanks
Rajakumar.K

Hi Raja,
One of your requirements isn't available in R/3.
What is my requirement is ,when I run MRP if there is stock availble production order should be created otherwise Material requirement has to created.
Standard MRP will create Dependent requirements (demand elements). MRP will create order PROPOSALs (purchase reqs or planned orders)(supply elements). MRP can be immediately followed by an additional program that will convert planned orders to Production orders. All these things are possible.
However, MRP will not check for the availability of components, and then selectively create production orders. Availability check, which is not part of MRP, is usually performed at a later part of the production order cycle.
Regards,
DB49

"Delivered without sales Order Number"

Hi Geeks
Can anybody let me know the steps to solve the error "Delivered without sales Order Number"?
thanks&regards
dj reddy

hi
Sure this document will help you. ple go thru it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c81f9190-0201-0010-0b96-9106fd90ef8c
Thanks
Varun CN

SD consolidating multiple sales orders onto a delivery

Dear SD gurus, I have a situation where I am trying to consolidaqte multiple sales orders onto a delivery. I have read the documentation and have created sales orders with the same: ship to party, incoterms ect. I have also selected the 'combine orders' check box in the customer master record. I am generating the deliveries using VL10A - but I am still getting one delivery for each order. Is there anything else I need to do?

Hi Jacqueline,
Basically, all fields which are copied to the header of the delivery (tableLIKP) via the routines of the copy control lead to a delivery split. Furthermore, some fields are copied to the header by all means and are relevant for the split there.
Split fields that cannot be changed are:
VSTEL Shipping point
KUNNR Goods recipient
ROUTE Route
The following split-relevant fields can be affected via the copy control,however, they should not be filled differently from the defaults since they are necessary for the control of the shipping process:
VKORG Sales organization
AUTLF Full delivery indicator
VSBED Shipping condition
FKARV Billing type (customer billing document)
LIFSK Delivery block
STAFO Update group for statistics
STWAE Statistics currency
KKBER Credit control area
KNKLI Account number of the customer with the credit limit default
GRUPP Customer credit group
SBGRP Processor group for credit management
CTLPC Credit management: Risk category
CMWAE Currency key of the credit control area
WAERK Currency of the sales document
INCO1 Incoterms 1
INCO2 Incoterms 2
KZAZU Indicator order combination
KDGRP Customer group
PERFK Invoicing dates (calendar identification)
Hope this helps
thanks

Goods issue to customer without sales order or Outbound delivery

Similar Messages

Maybe you are looking for