Goods receipt through Inbound delivery for Sub-Contracting Purchase order

Hi
I am trying to do goods receipt for the inbound delivery /shipping notification created for a sub -contracting Purchase order. The Finished product and the component part are batch managed, When I try to perform PGR in VL32N , I am getting a blank screen as error message and Goods receipt is not getting triggered . I checked for OSS note and found 645119 close to my issue but not an exact match . We are in ECC 6.0 with EHP 4. Can some one clarify whether it is possible to post GR through inbound delivery for a Subcon Purchase order .
Thanks in advance for your immediate response.
with regards,
Joseph Anand B

Hi, The issue may be due to this - the component is batch managed but the batch data is blank in the component list of the Purchase Order Item. Or a batch is maintained in the PO item component list but the stock for the same batch is not available with Vendor, i.e. stock with some other batch may be available.
In a receipt for Sub-cont PO, 101 happens for FG and 543 happens for component. But there is no option to provide the component details in a delivery. So in standard system, when 101 happens via a delivery, 543 will be posted in the background. So any error in posting 543 will result in a blank screen without any error message.
You can fix this by maintaining correct batch in the PO component list.
But there is another issue - you cannot do 'cancel posting' and 'return delivery' for this receipt. Only you can reverse the inbound delivery and you should know that the  recevied stock shouldn't have been processed to do reversal of inbound delivery.

Similar Messages

  • Batch determination for Sub Contracting Purchase orders

    Hi
    I want to allocate automatic batch number while creating the Sub Contracting Purchase order (item cat: L).
    System should dynamically allot the batch, no manual process.
    This automatic batch number allocation should be work for sub contracting PO's not all Purchase orders.
    Please suggest the process.
    Thanks

    Hi SUNIL,
    I haven't done such thing so I'm nut sure whether it works what I'm writing, but according to the manual is it possible to assign automatic batch creation to movement types.
    As I understood in SPRO you can:
    1. Set the internal batch assignment:
    Logistic General > Batch Management > Butch Number Assignment > Activate IBNA
    2. Define the creation for the movement type you want:
    Logistic General > Batch Management > Creation of New Batches > Define Batch Creation for Goods Movements
    But I think you can't make difference between 'normal' MVT 101 and 'L' MVT 101. Isn't it possible to create a new MVT for subcon-GR?
    In this case maybe you could realize your idea.
    But defining a new MVT just because of thi might be troublesome...
    Maybe you can find better solution.
    http://help.sap.com/saphelp_46c/helpdata/en/25/283c3f4f7811d18a150000e816ae6e/frameset.htm
    BR
    Csaba

  • Inbound delivery for Sub-Contracting Scheduling Agreement

    Hi All,
    I am working on inbound delivery creation --> PGR for sub-assembly (Semi-finished product) which we receive from sub-contracting vendor through scheduling agreement. At time of PGR, it should do MVT#101 for sub-assembly and 543-O for raw components.
    I already created JIT/FRC releases and did PGI (MVT # 541-O) for raw components. Now I am manually creating inbound delivery (VL31n) to post PGR. When I am doing PGR with VL60, I am getting below error.
    Any help or suggestion please ?
    As observation, I have seen that in inbound delivery I am only seeing sub-assembly (semi-finished) product. I am not able see "SC Component" tab which I have seen on other environment (ECC 6.0 with EHP4). Is it related to system limitation where we can't do PGR for sub-contracting ?
    Thanks.

    Hi AKPT,
    Sorry if i miss understood but note 352243 says to refer note: 338119
    "In the current release, it is not possible to process the components to be cleared when you post the goods receipt for the inbound delivery. (See Notes 338119, 197864 and 199703 also).
    However when you implement these corrections, the error log is also displayed for the subitems to be cleared and further processing can be carried as described in Note 338119."
    When I refer note : 338119, there is no correction. Am I missing anything ?
    Again my issue is I am not able to perform Post Goods Receipt. Even after doing PGR, if system do 543 for raw component, I am fine.
    Thanks.
    Regards,
    Ravi

  • Sub Contracting Purchase Order

    Hi All
    What is table name and field name to see the alternative BOM status for Sub Contracting Purchase Orders?
    Example:
    I have a Material :Shaft, which has two alternative BOM's.
    When i placed the Sub Contracting order to the Vendor. System will explore the BOM and display the list of components.
    How to know that Which alternative BOM system taken to the PO?
    Can any body please suggest me the table name and field name?
    Thanks
    SUNIL

    Hi
    if you are working with Alternative BOM in sub contracting. the system works as follows
    first of all you should mantian the Sub-Con Info record for subcon  that in purchasing view you will have the production version, here you have to attach which production version you want to use asd as you know that the production version depends on your BOM and this BOM will inturn get exploded into PO, as you know that info record is the combination of Vendor and Material, only for this combination your alternate BOM will explode
    Hope i answered your question
    Regards
    VIkrama

  • Inbound IDOC to post goods receipt with inbound delivery as reference

    Kindly let me know the message and IDOC type for
    Inbound IDOC to POST GOODS RECEIPT  with inbound delivery as reference
    I tried using WMMBXY but it didn;t work.
    Pls let me know asap.Your help is appreciated.
    Thanks and Regards
    Priti
    Edited by: Priti Adukia on Feb 11, 2008 4:48 AM

    Hi Nicole,
    What I've to do is quite the same as the case. Outbound and Inbound are in the same SAP system. If I've good understanding, I must set partner profile as follows :
    INBOUND - Parter LI with
                            Message DESADV
                            Operation code DELS
    OUTBOUND - Partner KU
                            Message DESADV
                            Operation code ???
    Please advise
    Suchart

  • Batch needs to be created 1st then post goods receipt with inbound delivery

    Hi,
    We are having split valuated materials with batch managed, we need to post goods receipt with inbound delivery.
    When we create inbound delivery with PO batch is blank which is correct.
    Now when we try to post GR with IBD in VL32N we need to put batch, but we are getting error message as batch is not available in receiving plant.
    In this case we have to create batch 1st with MSC1N and then we can put batch number in Vl32N and can post GR.
    If material is not split valuated we can put batch manualy(Without creation in MSC1N) in VL32N and it is allowing to post GR with batch.
    Can you please let me know this behaviour, is there any SAP note available about this behaviour.
    Thanks
    Sudhir

    Hi Uwe,
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    The binary answer would be no. You should use WMMBXY or MBGMCR instead.
    But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
    We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
    I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
    Hope this helps. Let me know if you have more questions.
    Regards,
    Rudra

  • Function module to create Inbound delivery with reference to Purchase Order

    Hi experts,
    I want to create Inbound delivery with refernce to Purchase Order. But I want to create item wise. For example If one purchase order is there with 10 line items. 10, 20, 30, 40, 50......100.
    If I am showing report for Purchase Order with select option and if I select first 5 line items 10, 20, 30, 40, 50 then my program should be create one Inbound delivery for selected line items only. I have tried BDC for Tcode VL31N, but its not worked. Is there any Function module to create Inbound delivery with reference to Purchase Order for selected line items????????

    Hi,
    Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
    For creating a delivery wrt PO u 1st need to have a sales order i guess.
    Regards,
    Amit

  • Posting goods receipt against Inbound Delivery

    Hi,
    Our process is creating Purchase order with Confirmation control for Inbound delivery. Then we create a Inbound delivery.
    1) After inbound delivery is done we do PGR through VL32N, the system updates the PO history with GR along with the Inbound delivery no. as a reference document against the GR & also the Inbound delivery document flow is updated.
    2) But our problem is if we try to do Goods receipt through T-code MIGO against Puchase order or inbound delivery we are not getting reference no. updated in the PO history & also there is no update in the document flow. Also the inbound delivery remais open.
    Can you explain why this is happening?
    Regards,
    Sagar

    Hi Sagar,
    It is very much possible to do GR using MIGO and document flow will also be updated, you have to do certain config settings for this which is as follows:
    in SPRO go to Logistics execution - Shipping - Basic shipping functions - Configure global shipping data - tick document flow update.
    Now when you check in Table VBFA you will get the Material Document No. in field VBELN and the status shall aso be updated and inbound delivery will be closed after complete GR.
    Hope it solves your problem

  • Fields mapping IDOC WMMBXY to post Goods Receipt against Inbound Delivery

    Hi Friends
    I am testing Goods Reciept against Inbound Delivery using Inbound IDOC.
    IDOC Type used WMMBXY  and Function Module :
    System is giving erorr message as "Document does not contain any items".
    Kindly let me know segment data mapping for above IDOC type
    Following data are passed to segments,
    E1MBXYH-BLDAT  Document date
    E1MBXYH-BUDAT Posting date
    E1MBXYH- XBLNR  .. in this field i am passing Inbound Delivery number
    E1MBXYH- TCODE  ...  MIGO
    E1MBXYI-BEAKZ   ...  B Goods Receipt against Purchase Order
    E1MBXYI-MATNR     material number
    E1MBXYI-WERKS     Plant
    E1MBXYI-BWART    Movement Type
    E1MBXYI-LIFNR         Vendor code
    E1MBXYI-KZBEW      B
    E1MBXYI-POSNR      Item number in delivery
    E1MBXYI-VBELN       Inbound Delivery number
        E1MBXYJ-VLIEF_AVIS            Inbound Delivery number
        E1MBXYJ-VBELP_AVIS           Item number in Inbound Delivery
        E1MBXYJ-WM_KZBEW            Movement indicator
    Raj

    Hello,
    Did you recieve any answer or find a solution? I encounter a similar issue.
    Thanks in advance,
    Génia.

  • Deficit of stock in Posto Goods Receipt of inbound delivery

    Hi folks. I´m trying to post goods receipt of an inbound delivery (return order), but for one material we get this message:
    Deficit of BA Unrestricted-use 21 CRT : 697-0 0001 3002 DEVOLUÇÕES
    I don´t get it, since it seems to me that its calling a deficit of 21 crates of the material 697-0, but this is an inboud delivery! I don't have any stock of this material at this plant.
    Any suggestions?

    The message looks it is checking for batch. Go to t.code 0VLP (Zero V L P), select the item category of the inbound delivery and go to the details. In the warehouse control and packing data you can find a field No batch check. Check this field and test again. Also make sure, the AutoBatchDetermination box is UNCHECKED.
    Regards,

  • Goods receipt against inbound delivery

    After an import po has been created then an inbound delivery is created also.So after the inbound delivery we do goods receipt and our goods receipt is done against po even when their is inbound delivery.The reason why the goods receipt is done with reference to the po is that we have different vendors for all the delivery costs for example we have a vendor for custom charges, a vendor for freight charges, a vendor for terminal charges.so the goods receipt is done against the po so that when doing the miro they can select the different vendors.But inbound delivery is done with a single vendor and if the goods receipt is done against the inbound delivery it might acquire all the costs to that vendor.Is there any method whereby we can be able to do our goods receiot with reference to inbound delivery that will also capture all the delivery costs

    The process you should follows is this:
    1) PO - define all the custom and freight condition types and enter the corresponding vendor in the condition types. Also, in the confirmations tab, choose Inbound delivery
    2) When the vendor ships the material, create an inbound delivery from VL31N to track it (against the actual import vendor)
    3) When the goods reaches customs, do a MIRO against the PO choosing 2-Planned delivery costs. This will credit the Customs vendor.
    4) When the goods arrive at your plant, do a MIGO against the Inbound delivery from step 2. Enter the MIRO number of step 2 in the popup that appears.
    5) Now do the MIRO for the actual import vendor and the freight vendors if applicable.
    Try this in your sandbox system. Doing a GR against IBD will not cause any difference in the accounting entries.

  • Goods Receipt using Inbound Delivery with reference to Outbound Delivery

    Here is our scenario that we need help finding a solution:
    1.  Multiple Intracompany POs created
    2.  On the confirmations tab of the POs, we have u201CInbound Deliveryu201D Selected because the items need to be received in with Handling Unit management.
    3.  We have the Order Combination box checked on the shipping tab to allow 1 delivery to be created for multiple purchase orders.
    4.  We create only 1 Outbound Delivery for only available items on various purchase orders.
    5.  Due to being handling unit managed, we need to receive the items using an inbound delivery.
    Problem:  We need to find a solution to easily enter an outbound delivery number which will allow us to receive only the parts that were shipped (issued), via the inbound delivery process. 
    If we remove the confirmation control key, we can complete a Goods Receipt for Outbound Delivery in MIGO u2013 but is there a way to complete a goods receipt using an inbound delivery with reference to an Outbound Delivery?
    Thank you for the help.

    Hi,
    You can work with Inbound delivery created via IDOC Triggered from Outbound Delivery, this will carry the HU Data as well. Please refer this wonderful note, which will explain you a lot of things,  Note 1119073 - FAQ: Automatic inbound delivery creation for stock transfers
    There are other notes also available for Inbound delivery creation with HU in STO, please browse the notes, if you find any difficulty.
    Regards
    Chandra Shekhar

  • Post Goods Receipt from Inbound Delivery

    Hi,
    I need to find a customer enhancement or a BADI that is modifyed a field when a Post Goods Receipt is created for an inbound delivery, in transaction VL32N.
    I have tried to use the Business Add-In LE_SHP_GOODSMOVEMENT, but the field I modified after is overwritten. It is a field of the mseg structure.
    Can anybody please advise on the available exits or BADIs?
    Thanks

    Hi,
    Please clarify whether you want to modify th efield at item or header. Please check the Badi names Starting with LE_SHP* .These BADI' are for Delivery.find the Suitable BADI and Apply it. For custom tab at header BADI is  LE_SHP_TAB_CUST_ITEM
    LE_SHP_TAB_CUST_OVER
    The BADI does not allow the update of data. There is a common trick used to perform the job ...
    - in the BADI, export the data to memory (e.g. in TRANSFER_DATA_FROM_SUBSCREEN)
    - in the old-fashion exit like USEREXIT_MOVE_FIELDS_TO_LIPS, import the data and map it.
    I hope this will resolve your issue. Thanking you.

  • Goods receipt with inbound delivery

    Hi,
    I need to make a goods receipt in reference to an inbound delivery using Idocs.
    But I don't find the idoc allowing to do that. I tried DELVRY03 but apparently It can't be used for this.
    Does some one know which Idoc type I should use.
    Thanks in advance.

    Hi Omar,
    You can use IDoc type <b>MBGMCR01/MBGMCR02/MBGMCR03</b> with message type <b>MBGMCR</b>.
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Goods receipt from Inbound Delivery

    My requirement is to get the Goods receipt no that got generated for a particular Inbound Delivery!
    Please do give me table used to get the same..

    Hi Sravanthi,
      Whenever a GR is made a <b>Material Document number</b> is created.
    U can view the MaterialDocuments from <b>MB03</b> transaction
    and it's values are stored in tables are <b>MKPF</b> and <b>MSEG</b>.
    cheers,
    Kalyan

Maybe you are looking for