Google voice doesn't work with os 10.10.2 and firefox 35.0.1?

Google voice used to work with Snow Leopard and FF. Now with Yosemite, I place a call, pick my 'e' mail address, and nothing happens. What am I missing. I did download the googlevoice and video setup.dmg file. and have the google talk plug in 5.40.2.0 always activate.

Same, in the meantime I can offer the new Hello feature in Firefox:
*[[Join a conversation on Firefox Hello]]
It is possible that a cached page is loaded, clear the cookies for the site: [[Delete cookies to remove the information websites have stored on your computer]] and try a new login.

Similar Messages

Google toolbar doesn't work with Firefox. How to Fix?

The Google toolbar doesn't work with my current version of Firefox. When I went to update, the Google toolbar was removed and I can't get it back. How do I fix this so I can still use Firefox?

Google needs to update the Google Toolbar program for Firefox 5.0.
The Google Toolbar '''7.1.20110512W''' version does work pretty good in Firefox 5.0 by using the Compatibility Reporter extension. But not every feature works 100%. 
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
Regards.

Google Voice Won't Work With Bluetooth Headset After Jelly Bean

I am SO frustrated. I had no idea I was installing the Jelly Bean update when I updated the software on my phone. Note to Verizon Communications team: PLEASE do a better job of communicating significant software updates. I would not have installed Jelly Bean. I learned long ago to stick with factory OS on my phones.
Since the update, I noticed that I could no longer dictate texts and emails. Also, my call recording app no longer worked. I switched to Swype and it would work for a few minutes and then stop. I could still use my bluetooth headset to make calls and S voice worked (although, like others here, I noticed that it's now worse--it doesn't recognize any contact names I request anymore). After trolling Android forums I found that the problem is with the bluetooth headset. You can still dictate when the phone's bluetooth is on, but when a device is connected, all bets are off.
I almost did a factory reset, but then I read that a hard reset will not restore ICS, nor did it resolve this bluetooth Google Voice issue for the few people who tried it already. In fact, resetting caused more problems (eg., more battery drain and removal of Adobe Flash, etc.).
Does anyone know how I can go back to ICS? Bluetooth and Google Voice are the two features I value most in my phones. This is a NIGHTMARE.

rcschnoor -
The Bluetooth/Voice Search/Dictation issue is a valid issue for the OP, a valid issue for me and oh yeah, the hundreds of other people affected by the, "Google Voice Search stuck on "Initializing" bug filed here on the Google Android Project page. Here is yet another reference to the same issue from Android Central.
The "Google Music freezing after Jelly Bean Update on Galaxy S3" is also a valid and documented bug located here also on the Google Android Project page.
So I ask, how does sharing with these people that do have these issues, and are affected by them, that you are not experiencing these issues help in any way? Isn't that the whole purpose of a community forum to help others?

The Google Toolbar doesn't work with Firefox 5 and all my bookmarks are saved in the toolbar. How do I go back to version 4?

Unfortunately any enhancements that you've made with FF5 don't outweigh the loss of my bookmarks in the Google Toolbar. How do I go back to FF4?

Install the following Add-on until Google releases a new version of their toolbar that is compatible with Firefox 5. Most Add-ons that worked with Firefox 4 should still work with Firefox 5, but the developers need to update a line in their Add-on's code to indicate with which versions of Firefox the Add-on is compatible. The following Add-on adds a "Compatibility" button in your Add-ons > Extensions that you may need to click after installing it and restarting Firefox.
*Add-on Compatibility Reporter: https://addons.mozilla.org/en-US/firefox/addon/15003
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.

[SOLVED] Google Earth doesn't work with xf86-video-ati

Hi all,
I'm having a problem with the open-source ATI drivers. I haven't had much luck finding out anything from anywhere else, so I'm hoping someone here can help.
Whenever I start Google Earth, the graphics run EXTREMELY slowly, almost as if it's running on a system with low memory. I'm running an Acer Extensa 4420 with an AMD Athlon 64 X2 dual-core 64-bit processor with 2GB of RAM. As mentioned before, I'm running on the open-source xf86-video-ati drivers, but this is the only app that gives me problems. GL screensavers run fine, and glxgears runs without any significant input. Running Google Earth in terminal also gives no output.
And I'm not sure if this is related, but closing Google Earth also crashes X.
Here's xorg.conf:
Section "Module"
Load "extmod"
Load "dbe"
Load "record"
#Free86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
Load "drm"
Load "synaptics"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
Option "DontZap" "no"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
Option "AutoAddDevices" "False"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "acer_laptop"
Option "XkbLayout" "us,de"
Option "XkbOptions" "grp:lwin_switch,grp_led:num,eurosign:e"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "AlwaysCore" "true" # send events to CorePointer
#Option "Device" "/dev/input/mice"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "false" # configurable at runtime? security risk
Option "LeftEdge" "1700" # x coord left
Option "RightEdge" "5300" # x coord right
Option "TopEdge" "1700" # y coord top
Option "BottomEdge" "4200" # y coord bottom
Option "FingerLow" "25" # pressure below this level triggers release
Option "FingerHigh" "30" # pressure above this level triggers touch
Option "MaxTapTime" "180" # max time in ms for detecting tap
Option "VertEdgeScroll" "true" # enable vertical scroll zone
Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
Option "CoastingSpeed" "0.30" # corner coasting speed
Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
Option "MinSpeed" "0.10" # speed factor for low pointer movement
Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
Option "TapButton1" "1"
Option "TapButton2" "2"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Acer Laptop"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 57.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "ATI Radeon"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
Option "AGPMode" "4"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
Option "AGPFastWrite" "yes"
Option "EXAVSync" "yes"
Option "ForceTVOut" "true"
Option "TVStandard" "ntsc"
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ATI Radeon"
Monitor "Acer Laptop"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1200x800"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
Here's my drirc:
<driconf>
<device screen="0" driver="r300">
<application name="Default">
<option name="force_s3tc_enable" value="false" />
<option name="texture_coord_units" value="8" />
<option name="fthrottle_mode" value="2" />
<option name="disable_stencil_two_side" value="false" />
<option name="tcl_mode" value="3" />
<option name="texture_depth" value="0" />
<option name="fp_optimization" value="0" />
<option name="def_max_anisotropy" value="1.0" />
<option name="no_rast" value="false" />
<option name="command_buffer_size" value="8" />
<option name="round_mode" value="0" />
<option name="dither_mode" value="0" />
<option name="disable_lowimpact_fallback" value="true" />
<option name="texture_image_units" value="8" />
<option name="disable_s3tc" value="false" />
<option name="color_reduction" value="1" />
<option name="vblank_mode" value="1" />
</application>
<application name="Google Earth" executable="googleearth">
</application>
</device>
</driconf>
Last edited by coolpyrofreak (2009-07-03 05:56:18)

I had the same problem (slow googleearth) with ATI Technologies Inc Radeon Mobility U1 (IGP 320m).
This .drirc solves it. I don't have an xorg.conf.
- no need for the 'disable_lowimpact_fallback' option
- no need to turn off 'atmosphere'
cat .drirc
<driconf>
<device screen="0" driver="radeon">
<application name="Default">
<option name="force_s3tc_enable" value="false" />
<option name="no_rast" value="false" />
<option name="fthrottle_mode" value="2" />
<option name="tcl_mode" value="3" />
<option name="texture_depth" value="0" />
<option name="def_max_anisotropy" value="1.0" />
<option name="no_neg_lod_bias" value="false" />
<option name="texture_units" value="3" />
<option name="dither_mode" value="0" />
<option name="hyperz" value="true" />
<option name="round_mode" value="0" />
<option name="color_reduction" value="1" />
<option name="vblank_mode" value="0" />
<option name="allow_large_textures" value="1" />
</application>
</device>
</driconf>

Download doesn't work with MAC 10.4.11 and i just noticed my Firefox is 2.0.0.6

Hi,
I tried downloading the free Firefox. As soon as I clicked on it a message popped up and said it wasn't compatible with my Mac.
My Mac is 104.11 and I cannot afford to buy another computer right now. The screens say it is compatible with MAC 10.4.11...
Any suggestions

Sadly, Firefox no longer includes support for MacOS 10.4, however you can still use browsers similar to Firefox. 
[http://www.tenfourfox.com/ TenFourFox] is an unofficial build of Firefox for older Macs, and so will work on your computer. However since you are using a really old computer, it doesn't have all the features Firefox has. 
[http://caminobrowser.org/ Camino] is a community project to make the best Gecko-based browser for Macs around. Unlike TenFourFox it doesn't try to be Firefox, but instead does its own thing. 
[http://www.seamonkey-project.org/ SeaMonkey] is another community effort and is a continuation of the original Mozilla Suite which shares a few similar properties with Firefox. SeaMonkey is great for people who like their browsing experience retro.

Leopard doesn't work with Lego Star Wars II and ATI graphics?

My son has an iBook G4, and has been running Lego Star Wars II just fine under the latest release of OS 10.4. He just installed Leopard, and now the Lego Star Wars game says that his graphics board isn't enough to run the game. Is there a patch for this? He has a PPC G4 1.42 GHz with 512 MB RAM, ATI Mobility 9550 graphics board with 32 MB RAM. We installed 10.5.1 patch to the OS.
Any help?

Here are the minimum system requirements for Lego Star Wars II:
System Requirements
Mac OS X v10.4 or later
1.6GHz PowerPC or Intel processor
512MB RAM
64MB VRAM
3GB free hard-disk space
Mouse and keyboard
DVD drive
As you can see, your son's computer doesn't meet these requirements.
I'm sure he'll be happy when you tell him you have to buy him a new computer to play the game!

Buffalo Nas Navigator2 doesn't work with Mavericks

Hello,
On my Mac Pro (5.1) Buffalo Nas Navigator2 (v2.69 & v1.71) doesn't work with Mavericks :-(
The window opens and closes immediately (approximately 2s).
According the Buffalo support, all the versions works with Mac OS (including Mavericks ?)
Thank you for your help.
Regards
Olivier
PS: the firewall is not enabled

Hello Mark,
Thank you for your message.
For your information, I have no problem with the Finder (I don't use cifs), I can see my LinkStation. The problem is only with Nas Navigator.
Yesterday I tried to use LinkNavigator: Link Navigator installs Nas Navigator and tried to connect to the Link Station, and I could see a message like "no Link Station found on the network" while I have 4 Link Station :-(
I believe that Finder and Nas Navigator do not use the same protocol.
It's curious that the support of Buffalo are not aware about the problem between Nas Navigator and Maverick.
Olivier
PS: I also use fixed IP ;-)

Google News doesn't work properly with Safari 5.1.4

Has anyone else noticed that Google News doesn't work properly with Safari 5.1.4?

Thank you for your response. The more I use 5.1.4 the more problems I am seeing. There are problems with images and layout. I would like to back up to 5.1.3 but the system won't let me. At present I a looking for a solution, or I might just start using Firefox.

Firefox 3.6.27 (Mac) doesn't work with Google Blogger's Blog Archive links?

I noticed this just started happening about week ago. Firefox 3.6.27 (Mac) doesn't work with Google Blogger when clicking in the Blog Archive sidebar links. I can't upgrade because I'm using a PowerMac. Anyone have a suggestion? Thanks!

I press the combination after having some of the document's text selected, otherwise there wouldn't be anything to apply the paragraph style in the first place. But the real thing is I do the exact same with other paragraph styles combinations (Cmd+Alt+1, Cmd+Alt+2, Cmd+Alt+4, Cmd+Alt+5...) and it works. In Safari, even the one I'm interested in works (Cmd+Alt+3). The natural solution, it appears to me, would be a shortcut conflict, but I can't manage to find it, not even disabling my four add-ons (Adblock Plus, bookmarks-deiconizer, Customizable Shortcuts, YouTube to MP3). The Google forums are not finding a solution either. Anyway, thank you for trying.

Google Voice Widget Not Working in Safari 5.1 which is Adobe flash wmode transparent based

Google Voice Widget Not Working in Safari 5.1 which is Adobe flash with wmode transparent set. For that matter all flash text fields in Safari 5.1 are not working accross the web when wmode is set to transparent. This is a Safari bug! Other browsers work fine.
Well after much research Adobe flash text field with wmode transparent set is not working in Safari 5.1 when any flash object has the wmode set to "transparent", or "opaque". The problem is many site must layer flash objects with html so the wmode transparent must be used.
Affecting sites like BEST BUY, WALMART, CVS, STAPLES, Chechout their flash based weekly ads and find one that you need to update the quantity in the flash pop-up and the text field with keyboard strokes will not work. Flash text fields were all working fine until several month ago when Safari rolled out 5.1 working for Google Voice Flash based widget which uses the wmode transparent. HELP!
John Hooper
Techno Online Problem Solver
http://www.johnrhooper.com

All 3 examples seem to render just fine in IE and FF.
See comparison photo:
http://www.cidigitalmedia.com/web_devel/background.jpg
If not working for you, try clearing your cache to remove any old, non working versions.
Test on some other machine besides yours.
Code looks fine and seems to work.
Best wishes,
Adninjastrator

HT5655 Flash still doesn't work with Safari.

I've done this repeatedly. Flash still doesn't work with Safari. It does work with Firefox and Chrome.
I deleted the Flash plugin from Library>Internet Plugins. That didn't solve the problem either.
What can I try next? Thanks.

drwxrwxrwx   3 root        wheel    102 Sep 1 2012 CANONiMAGEGATEWAYDL.plugin
drwxrwxrwx   3 root        wheel    102 Sep 1 2012 DRM Plugin.bundle
drwxrwxrwx   3 root        wheel    102 Sep 1 2012 DirectorShockwave.plugin
drwxrwxrwx   3 root        wheel    102 Mar 2 08:17 Disabled Plug-Ins
drwxrwxr-x   3 root        wheel    102 Mar 23 00:43 Flash Player.plugin
drwxrwxrwx   3 root        wheel    102 Sep 1 2012 Flip4Mac WMV Plugin.plugin
drwxrwxrwx   5 root        wheel    170 Sep 1 2012 Google Earth Web Plug-in.plugin
drwxr-xr-x   3 root        wheel    102 Sep 25 2012 JavaAppletPlugin.plugin
drwxrwxrwx   3 root        wheel    102 Sep 1 2012 OfficeLiveBrowserPlugin.plugin
drwxrwxrwx   3 root        wheel    102 Jun 20 2012 Quartz Composer.webplugin
drwxrwxrwx   3 root        wheel    102 Mar 19 23:30 QuickTime Plugin.plugin
lrwxrwxrwx   1 root        wheel     68 Sep 1 2012 RealPlayer Plugin.plugin -> /Applications/RealPlayer.app/Contents/MacOS/RealPlayer Plugin.plugin
drwxrwxr-x   3 root        admin    102 Apr 11 2012 Silverlight.plugin
drwxrwxrwx   3 root        wheel    102 Sep 1 2012 ebldetect.bundle
-rw-rw-r--   1 root        admin    856 Feb 28 21:45 flashplayer.xpt
drwxrwxrwx   3 root        wheel    102 Sep 1 2012 googletalkbrowserplugin.plugin
drwxrwxrwx   3 root        wheel    102 Sep 1 2012 iPhotoPhotocast.plugin
drwxrwxrwx   3 root        wheel    102 Sep 1 2012 npgtpo3dautoplugin.plugin
-rw-rw-rw-   1 root        wheel   2394 Jul 21 2012 nsIQTScriptablePlugin.xpt

Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser

Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser until I installed their new google voice and video chat (made by vidyo) software. I was told by genius bar to install Yosemite, which I did. But that did not solve the problem. I removed macKeeper, as well, since a techie friend told me that could be the cause. Nothing so far has worked. When the problem first happened, it seemed to only happen in Chrome. Google voice calling out worked fine in safari, for about a day or so. Now I cannot call out from any browser. I can, however receive calls, and make calls within the video hangout.
I can be contacted directly if questions at gary at couplewise dot followed by the usual extensin

You can only suspend service for 3 months at a time (with or without payment) and only twice a year.

Globe SIM card doesn't work with my iPad

I really desire to use my iPad as my alternate Text messaging gadget but the problem is my Globe micro-SIM doesn't work on it. The name and Signal strength of my Telco, however, do appear on the upper left corner of my iPad. I cannot send text messages from my iPad using my Local service provider (Globe Telecoms Philippines). Any suggested solution to my problem, please...

The micro-SIM on an iPad is used only for internet data connection (web browsing, email, etc.), not SMS or voice.
Depending on what facilities are available to the people with whom you wish to communicate, you might be able to use one of the many internet-based forms of messaging. (For example, iMessage within the Apple ecosystem, AIM, Jabber, or GoogleTalk.)

Google voice doesn't work with os 10.10.2 and firefox 35.0.1?

Similar Messages

Maybe you are looking for