Got a probook says install system operating system on hard drive

what do i do hp probook s series

Hi,
Please write your notebook product number (p/n) and country of purchase.
Resource:
How to Locate the Notebook product number (p/n)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

My screen says boot device not found. Please install an operating system on hard drive,

My screen says boot device not found. Please install an operating system on hard drive. What could have caused this problem? Help!!!!!

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
3. Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run a test on the Hard Drive. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Recently installed a 1TB hitachi travelstar hard drive into my Macbook 10.6.8 however Time Machine says not configured hence cannot back anything up

Recently installed a 1TB Hitachi travelstar hard drive into my Macbook (13inch mid 2010) OS X 10.6.8 .
However now having problems with configuring , latest issue my Time Machine says Not Configured hence cannot back up using this device !
Can anyone help ?

You installed the new hdd with new install of Mac OS .. or did you recover your old TM setup??
If TM cannot locate the Time Capsule .. is it visible in airport utility or finder??
Are you even using a TC?? If you are using an external drive you need to spell it all out.
Time Machine may not recognise the old backup.. you can usually inherit the old one.
See B5 and B6 here.
http://pondini.org/TM/Troubleshooting.html
Otherwise use A4.. delete the existing TM setup and reconfigure it from scratch. If you do that TM should discover and reuse the old backups if possible.. but a new hard disk might not be possible it may need to start over.

How to install Windows 7 on new hard drive?

I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
1. How do I install Windows 7 on new hard drive?
2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
by the way this is my laptop spec (for reference) ; -
* Note *
I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
I hope somebody will help me answer my question,
Thank You
Solved!
Go to Solution.

I got the solution;
Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

I work for a university and we have a legal apple vendor.Can we re-install macosx for a replacement hard drive for a old macbook?Just one example.

I work for a university and we have a legal apple vendor who we get to buy all our Apple products from.Can we (university) re-install macosx for a replacement hard drive once the hard drive gets replaced? How can we as the university IT department legally re-install macosx on a imac,macbook, macbookair etc. We would like to load customized macosx imaging software onto the mac machines(imac, macbook, etc ). The university has its own IT workshop and we would like our users to get their laptops back in the shortest turnaround time.

We're not "Apple Inc." here, just users like you.
So whatever we say is not an official statement, nor does it in any way, shape, or form represent the official or unofficial policies or opinions of Apple, Inc.
But I'll offer my quick opinion, having worked in information-systems and technology support in a wide variety of environments over many years.
Question #1. "NO!"
No tech support nor repair facility, even if "Apple-authorized", is automatically empowered to install or upgrade OS X on a replacement hard drive just because it is more convenient or time-efficient. When the repair is complete, the student should be expected to (re)install the operating system themself*!
Nurturing students (and occasionally dragging them, screaming and kicking!) as budding computer-, tablet-, smartphone-users to become digitally self-sufficient is a worthy goal that any institution of higher education must pursue.
Making students totally dependent upon "Mother Support" for every little thing about their personal digital devices is a grave disservice to both the students and the people who provide the support. Support-mothered students do become life-long digital dependents, instead of taking the required time to learn enough about the care and feeding of their digital "pets" to sustain them. Entreprenurial students may choose to become 'experts' and actually help each other with their devices, and even make money doing it. Some students may even be inspired/coerced to pursue a career in tech support!!!
*By all means, if the student requests additional help (re-installing the OS), then the University should charge the student a fair price for the service, provided that the user provides the OS on original or upgrade media, or in the case of the 'digital download' upgrades (for OS X 10.7 and 10.8) provides proof of purchase for the OS upgrade, or the original purchase receipt or other recognized documentation for the purchase of the computer showing the version of OS installed when purchased. Students need to learn about personal responsibility, economics ("What is MY time really worth"?), and proper record-keeping too!
Question #2. Regarding the customized imaging software, provide it on media or a link for students to download and install it. Make it their responsibility!
Message was edited by: kostby

How to install and reconfigure a new hard drive?

How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can give

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

If I want to install Lions on a 2nd hard drive in my MacPro Desktop, will it allow me to do so if I have Leopard installed on the boot drive?

I have a blank 2nd hard drive that I am going to install in my MacPro desktop. The boot drive already contains the Leopard operating system. I want to install Lions on the blank hard drive. Will setup in Lions when it comes out, allow me to install Lions onto the 2nd hard drive since it should detect that I have a valid Apple operating system on the boot drive?

You can first install Snow Leopard then re-download Lion. Or you saved the original installer application then created a bootable Lion installer on a USB flash drive or DVD. Or you buy Apple's $69.00 USB flash installer.
You haven't told us what hindrances you've encountered, so you should post your own separate topic related to your problem and not threadjack another person's topic.

Unable to install Mountain Lion on my hard drive

I'm trying to upgrade my early 2008 mac pro from Leopard to Mountain Lion using a bootable usb drive but I'm having trouble doing so. When I try installing mountain lion to my hard drive (Mac Drive 1) - The hard drive is greyed out and says 'you can't upgrade this version of OS X'. Yet it looks like I can install mountain lion onto my second hard drive (Mac Drive 2) for some odd reason.
Here's the details for my mac drive 1 which I'm having trouble with (I noticed the volume format is greyed out on disk utility as well).....
And here's the mac drive 2 info which I don't want to install mountain lion onto but looks like I can....
Any help would be much appreciated! Thanks a lot.

I can't answer the bad hard drive question without some guessing. Not that smart.
Do you have a bootable copy of the Mountain Lion installer?
If not download the following. The site says it will work with 10.6:
http://blog.gete.net/lion-diskmaker-us/
That program will allow you to make a bootable DVD or USB with Mountain Lion on it.
You can boot off of it, erase the disk, and then install Mountain Lion.
I think you should be able to reinstall from carbon copy cloner, but I haven't used that program. During the setup it will ask you if you want to import files, but I don't know if it can read carbon copy cloner. I know it can read a Time Machine backup.
A clean install is generally better anyway.
If you get Mountain Lion installed, not everything works like it did in 10.5/10.6. For an example, scrolling is reversed, but you can change it back to the way it is in 10.5/10.6 in System Preferences. After spending some time in System Preferences, my computer acts pretty much the way it always did.

Installed Samsung F3 1TB internal Hard drive configuration partition

Hi,
Have just installed a Samsung 1tb internal hard drive and now it comes to formatting and partitioning it not sure what amount of gb and how many partitions to do. I have all my itunes music and films stored on an external 1tb hard drive for information, and also have an external 320 gb drive for back ups. So any ideas what to do with the partitions and gb on the internal drive.

There will be a lot of views on how the drive should be partitioned, so I will offer my opinion, and state it is only one opinion.
Take a look at the amount of space you have been using for your operating system, are you planning on upgrading the OS, and then set a partition for only the OS. Make it large enough to allow for future upgrades, maybe 30-40 GB larger than needed so there is enough space for doing installs.
Keep a partition large enough for all of your software, maybe have that be most of the remainder of the drive after the OS partition.
Since you keep music, etc., on an external drive it should be easy to keep the internal drive in good shape and unfragmented.
You could set a partition for temporary files, the /tmp file system, but it is easy to fill that up with a lot of web surfing and get yourself in trouble on space.
Anyway, my view is a good size partition to allow for OS and future OS installs, and the rest for software.
Ralph

I am having trouble installing Lion on a partitioned hard drive. Help?

Aloha:
I am having trouble installing Lion on a partitioned hard drive
I have three internal HD's The first I am running the system on 10.6.8 (which is up to date) , the second I do most of my work on and the third I have partitioned into two and I am trying to install Lion on one of the patitions.
But Lion has decided it will only go on the first HD.
Above is the one I want to put it on, but it's not available and I can't change the partition scheme. None of the things the directions state are usable??
What might I be doing wrong?
Thanks
Dan Page

Thanks again for a rapid responce.
I finally got lion on one partition and my daily "SilverKeeper" backup on the other.
Since the only thing I had on the two partition Hard drive was the back up and since the backup would get put on tonight any way I changed the drive to no partitions. This gave me the ability to choose the GUID option, which I did and then I installed two partitions and successfuly istalled Lion on one of them. I even tied Lion into the iCloud successfuly.
But I am not out of the woods yet! I brought My brand new iPad to lunch and was informed that my iPad was synced to my Lion at home and I was on the cloud. That blew my mind, I was impressed.
I then read the Daily news with out problem, however, when I shut down my iPad, that was all she wrote. I can not get the iPad back on. The best I could do was see the revolving gear start and then freeze. It's on charge now and I can not even get rid of the frozen gear.
Not sure this all has anything to do with the recent installation on my main computer, but it's mighty suspicious.
Need some help!!
Thanks
Dan

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

Macbook Pro with SSD (optibay) and HDD. Want to clean install with discs and move hard drives.

Hi all,
I have bought a used Macbook Pro 15' i5 Mid 2010 in brilliant condition. It came with original HDD in main Hard drive space and and SSD in an optibay. This all works fine and came with Mavericks already installed.
I want to start using the laptop like from new as there is nothing on there i currently need atm and dont want problems in the future with my apple id not being the original installer of mavericks. (had a similar problem previously on a used macbook white that had lion on)
What i want to do is erase and move the SSD to the main hard drive bay (have read this is preferred) and a clean install using install discs that came with it onto the SSD. Then install the HDD into the optibay or external enclosure and reinstall optical drive, not sure on that one yet.
My main questions are about the process i should use. There is nothing i need to back up or anything as this is effectively a new machine to me. Shall i simply erase the SSD (currently contains the OS) and install it in main hard drive bay and run install discs to install original OS (10.6.3)? Is it that simple? Any tips on erasing SSD would be useful also?
Also as the machine currently boots from the SSD that is in the optibay, is there anything that tells the machine to boot from that hard drive as apposed to the main HDD bay or does it just know? If there is, when i install the SSD into main hard drive bay how do i tell the machine i have done so and to boot from there?
The other thing i may do is buy a new SSD and do a new install on that and leave the current SSD in the optibay and use that for storage. Undecided on that yet.
Any help will be much appreciated. Thanks.
Sam

To do what you want, and the only way to do what you want legally and physically, you will need a set of Original System Reinstall DVD Discs. Without them you can't do what you want as the install of Mavericks that is now on it is TIED to the previous owners Apple ID and can not be transferred and or Reinstalled without knowing that persons Apple ID. And even iof you knew it it would still be TIED to that Apple ID and not yours.
So did the previous owner supply the Original System Reinstall DVD disc Set? If not you will need to order them from Apple.

Can I instal lion clean on my hard drive?

I dont want to upgrade my current system. Its all a bit clogged up at the moment because of all the software I have installed on it. How can I do a clean install of lion on my hard drive?

Welcome to the  Discussion Forums.
nickboeka wrote:
Interested in getting an ATV, simply to interface my huge movie/tv show/music video collection directly to my TV. Currently, I have my entire collection in iTunes. I sync movies to watch on my iPod. Works great. Will the same movies get sync'd and be viewable through the ATV to my HDTV?
Any movies you sync to the ipod already will work on the tv.
does the ATV support only the same file types as iTunes?
Actually it supports less than itunes but anything that plays in itunes, itunes can convert for you.
Does the ATV allow you to manually manage what goes on it, like I can with the iPod? The reason is I have over 300gb of stuff, and don't want to sync all of it to the ATV at anyone time.
Yes you can manage what gets synced and what doesn't although the management isn't quite the same as on the ipod.

Can I install itunes on my second hard drive?

Hello All,
Just wondering if I can install iTunes on the secondary hard drive where I keep all my audio/video files. That way, when I reinstall my OS or do an upgrade to Vista, I won't have to reload iTunes?
Thanks!

You can tell iTunes to install to any hard drive in system. But this will not save from having to reinstall program if/when you reinstall OS. iTunes like most Windows programs installs files in multiple folders on drive and makes registry entries.
You can, and should, set iTunes to store library on the second drive. That way when you have OS problems your media files should not be affected.

How do I install lion and format the hard drive?

How do I install lion and format the hard drive, as though this was a new mac.

If your Mac is a 2011 model and originally came with Lion Pre-Installed by Apple then you can use the Internet Recovery HD system to Wipe/Erase the Complete drive and Re-Install Lion.
If it is an older model, even and early 2011 model, that did NOT come with Lion Pre-Installed by Apple you can not sell or give it away with Lion installed on it. You have to install the original version of OS X on it.

Got a probook says install system operating system on hard drive

Similar Messages

Maybe you are looking for