Got through the first stage of windows installation- then trouble!

Hi everyone!
I formated the partition and it seemed to install windows. The quote below is an excerpt from the boot camp manual
'Setting Up Windows
After you install the Windows software, *your computer automatically restarts using*
Windows. Use the Windows setup screens to configure Windows. '
My computer restarts but does not go into windows, it goes through the windows install process again as if I hadn't already installed it! I have to restart by pulling out the battery, then turning it back on and then hitting my 'eject' button manically before my computer starts the windows install process again.
Anyone had similar problems or solutions?
The new windows file has appeare

Just wait about 10 seconds and Windows should boot from the hard drive. It will then come up into a dialog that allows you to finish the install.

Similar Messages

  • Hello, I just purchase Adobe Premier elements 12. I installed it but the only problem is when I try to open "new project" it tells me I have to put my password in and username for the first seven days of installation, but when I do that the project never

    Hello, I just purchase Adobe Premier elements 12. I installed it but the only problem is when I try to open "new project" it tells me I have to put my password in and username for the first seven days of installation, but when I do that the project never opens, it just has the loading bar loading and then it stops, so I have no idea wat the problem is, please help

    new project help
    What computer operating system is your Premiere Elements running on?
    Have you gone through the typical drills of
    1. Latest version of QuickTime installed on your computer with Premiere Elements?
    2. Running program from User Account with Administrative Privileges as well as from Run As Administrator applied to the desktop icon
    with right click of the icon, followed by selecting Run As Administrator?
    3. Does problem exist with and without the antivirus and firewall(s) disabled?
    4. Even though the Premiere Elements 12 Editor will not open, can you open the Elements Organizer 12?
    If Yes to all of the above, please review the following for a possible solution...
    ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
    Please review and consider the above and then we can decide what next which might include trying to open
    the program directly from the .exe files.  (If Windows 7, 8, or 8.1 64 bit, Local Disk C\Program Files\Adobe\
    Adobe Premiere Elements 12\ and in the Adobe Premiere Elements 12 Folder are the Adobe Premiere Elements 12.exe
    and Adobe Premiere Elements.exe files. Double click the Adobe Premiere Elements .exe file to try to open the project.)
    We will watching for your results.
    ATR

  • I went to sync my iPhone 4 as usual and when it got to the end stage of the sync where it sync the photos from iPhoto, I get a message pop up that says, "The iPhone cannot be synced. The required file cannot be found." What do I do?

    I went to sync my iPhone 4 as usual with my iTunes account on my MacBook Pro and when it got to the end stage of the sync where it syncs with iPhoto, I get a pop up message that says, "The iPhone cannot be synced. The required file cannot be found." What do I do?

    Hi. I am having the same problem.
    I have updated iPhone software and carrier settings, OSX Lion on the comp and in step 4 of 4 during photo sync about half way through, the error message comes up and now my pics are gone from the phone. I did empty the cache and the problem still persisted. I changed cables, I restored the phone and synced from the back up and even restored and created a new phone identity, still no love.
    I am puzzeled, any suggestions?

  • I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed.  No other programs have similar problem. Any suggestion what can be done?

    I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences.  But now I cannot close the lock in the bottom left corner of the box.  When I click on it, I briefly see a word that I think says "reauthorizing" but

    I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences.  But now I cannot close the lock in the bottom left corner of the box.  When I click on it, I briefly see a word that I think says "reauthorizing" but the word flashes too quickly to tell for sure.

    If you are admin.
    Try restarting your Mac.

  • I cannot download the creative cloud i have havent got passed the first step

    I cannot download the creative cloud i have havent got passed the first step

    Maybe you are taking the wrong first step.  What is the first step that you have not gotten passed yet?

  • "The computer started using Windows installation media." Installing windows 10 technical preview on virtual machine

    The computer started using Windows installation media. Remove the installation media and restart your computer so that Windows starts normally. The, insert the installation media and restart the upgrade. (Do not
    select |custom[advanced]| to perform an upgrade. |custom[advanced]| installs a new copy of Windows and deletes your programs and settings.)
    That is the Compatibility report that I'm getting when trying to install onto parallels 10 Version 10.2.0 (28956) on my mid 2009 Macbook 13. This happens just after I click 'Install now' and accept the T&Cs.
    I am selecting 'Upgrade: Install Windows and keep files, setting and applications'. 
    I am upgrading from the Windows Technical Preview Evaluation Copy. Build 9879.
    I have updated my EFI and tried a few restarts and am booting from a CD. No luck yet.
    Any help would be muchos appreciated. 

    Hi bitofagiggle,
    I am not familiar with mac machines, based on what I know, there should be more settigns that need to be configured before the installation of Windows, I suggest you contact the manufacturer for further help regarding how to make Windows to upgrade smoothly.
    The below is some articles for reference:
    Install
    Windows 8.1 on a Mac
    Your Manufacturer website:
    How to install Windows using Boot Camp
    Please note: Since this website is not hosted by Microsoft, the information may change without notice. Microsoft does not guarantee the accuracy of this information.
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

    Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

    Bill ...
    Believe it or not, might be a font issue > Computer won't print black text in...: Apple Support Communities

  • I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. It does not show up under "Programs".

    I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".

    Repair your Apple software update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR,

  • My ipod classic crashes after about 2-3 days of being attached to my Kenwood KDC-248U receiver in Pickup.  There are 2700  songs but only get through the first 200   Apple has replaced the Ipod 3x and Kenwood says it is not a problem with the receiver.

    My ipod classic crashes after about 2-3 days of being attached to my Kenwood KDC-248C receiver in my Pickup.  There are about 2700+ songs on the Ipod, but only get through the first 200 to 300 songs.  The screen fades, but there is still power and a charge.  Does anyone have a clue because I don't.?

    There seem to be compatibilty isuue with KDC receiver and Ipod Classic firmware 1.1.2.
    Here is an earlier post on the same problem.
    https://discussions.apple.com/message/12471279#12471279
    Good Luck on getting an earlier version ipod firmware. (Google it)

  • TS1814 When I try to upgrade my pc to iTunes it will go through the process of downloading and installing then I get this message,

    When I try to upgrade iTunes on my pc it will go through the process of downloading and installing then I get this message
    The feature you are trying to use is on a network resource that is unavailable.
    Click OK to try again or enter an alternate path containing the installation package iTunes.msi
    What should I do to correct this problem?

    Try to restart your computer and see if you and reupdate again.

  • When I try to play an album from my library, the first song will play but then it will jump to another album.  iTunes is also splitting up my albums in a strange way.  any help?

    When I try to play an album from my library, the first song will play, but then it jumps to a different album.  iTunes is also splitting up certain albums like sound tracks.  any help?

    I'm thinking you sync to your computer over Wi-Fi, if correct, switch to sync when connected to iTunes, turn off sync over Wi-Fi. Hope this helps, Good luck. Cheers.

  • Tried opening my Mac in safe mode SMS mode. And pram mode. It acts like it is going to start up the gets about 10 percent through the grey start up box and then suts down

    Tried opening my Mac in safe mode SMS mode. And pram mode. It acts like it is going to start up the gets about 10 percent through the grey start up box and then shuts down. Any other thoughts?  Thanks

    Douglaslouis,
    which model Mac do you have, and which version of OS X is installed on it?

  • I had my iPod 5th generation in the wash for about 3-5 minutes, i took it out of my jacket and made the mistake of trying to turn it on. The first time it came on, then never came back on, its been in rice for 6 days, should I try anything else?

    I had my iPod 5th generation in the wash for about 3-5 minutes, I took it out of my jacket and made the mistake of trying to turn it on. The first time it came on, then never came back on, its been in rice for 6 days, should I try anything else? Please help!

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Apple will exchange your iPod for a refurbished one for $99 for a 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
      Apple - iPod Repair price             

  • HT204406 When I activate iTunes Match it goes through the process of analysing my library, then it matches a few songs but always then stops stating that the network dropped out - any ideas?

    When I activate iTunes Match it goes through the process of analysing my library, then it matches a few songs but always then stops stating that the network dropped out - any ideas?

    Bstarling wrote:
    I am unable to write down because the log is moving too quickly.
    Well, you don't have to write down anything. Just click on the message and copy it. Then paste it here, or in a text editor (eg, TextEdit). And you can enter a string like "Audio CD" (w/o the quote marks) in the filter and see only messages containing it.
    mds[71]: (Error) Server: Failed to register path "/Volumes/Audio CD"
    That's the metadata server, used by Spotlight. AFAIK, Spotlight does not index audio CDs, so what is this about? I don't know. Maybe it's the cause of what you observe; or maybe it's another symptom. Thinking again of the network issue… have you maybe installed some third-party software related to both Spotlight and the network (Searchlight perhaps)?

Maybe you are looking for