GP, callable object Web Dynpro Application (bespoke) not appearing in list

Hey y'all
We're developing our first GP, and we would like to call an existing bespoke Web Dynpro. When creating the callable object, we're selecting type Web Dynpro Application, but our Web Dynpro screen is not appearing in the drop down list on the next page. We think that this is because the application has been deployed to a different server (i.e. it has not been deployed onto the portal server).
So the question is, has anyone faced this problem before, and is there a solution?
Kind regards
Jon

Hi John,
Please have a look at this Exception on creating GP Action
This will solve your issue definitively. Do not take care of a given SDA, just redeploy everything and make sure that everything is overwritten by selecting the right option.
Best regards,
David

Similar Messages

Web Dynpro application does not apply portal theme

Hi Guys,
We created a new portal theme and assigned it to our users. The portal desktop gets assigned succesfully and portal applications also show the new theme colors. But all web dynpro pages still show in the blue SAP theme. This issue only occurs on our development portal, when we import the same theme on our test portal is all works fine.
I also tried to assign the WebDynpro parameters "sap.useWebDynproStyleSheet" and "sap.theme.default" and then the web dynpro applications are indeed forced into the portal theme. However, that is no soluition since all web dynpro applications then use the theme including SAP applications like the NetWeaver Administrator.
We looked at OSS note '1446099 - Web Dynpro application not displayed
in customer theme' but the stylesheets are not different.
sap portal sytlesheet: UR=7.31.0.14.1
Web Dynpro Style sheet: UR Version=7.31.0.14.0
The portals in which the theme does work have the same stylesheet versions as mentioned above.
We also created an OSS message for this so if we solve it that way I will update this message. But if there is anyone on this forum that might have an idea that it would be highly appreciated. If the problem takes too long to solve we will perform a refresh from a portal that works but I hope that we will be able to find the reason of this behavior.
Kind Regards,
Nico van der Linden...

In theory, these versions should work correctly.
You can compare the patch levels applied on your dev portal and test portal - specifically compare the version/patch for the component EPPSERV*.SCA - and see if you have any differences there.
Thanks,
Shanti

Errot at creation of callable object (Web Dynpro Component (GP Interface))

Hi,
I have made a Web Dynpro component and it has been built and deployed without problems.
However, when I go to the Design Time in the portal to create the callable object, it dumps with this message:
500 Internal server error
The initial exception that caused the request to fail was:
java.lang.UnsupportedClassVersionError: bad version number in .class file
Any ideas to what this is about ?

Hi Peter,
Check this link.It may be helpful.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/java/netweaver%252bdeveloper%252bstudio%252b(NWDS)
Regards,
Sumangala

Web dynpro application does not exist

hello,
I wanted to ask reagrding the above error I am facing, I get an error message when I try to test the web dynpro service in the SICF.
Get an error message additionally"RABAX_STATE".
Previously my web designer was working and now it doesnt work when I try to view the webdynpro. Its greyed out.
I was able to see all the icons etc. to work ´with the web designer and now desappeared.
When I look into the details I see also that the domain is not correctly setup.
It was working previously and now something chnaged and dont see anymore.
Is it depending on the windows setting or.....
Please advice.
Thanks

The FQDN was setup, however, the problem is when I save it go back after giving in the Domain name or Host name similar to
my PC and .de in the end and have also activated the V2 DEFAULT, I restart the server and go back to display the ZDEFAULLT to see icm/.............and cannot find this and the chnages were not saved as I had originally performed. Its still showing the same DBHOST......etc...

Web Dynpro Application is not openeing from Portal UWL

Hi,
I have developed a WD application which is integrated in the portal. This WD application navigates through several levels of approval by triggering the workflow. Initially USER will create the request launching the WD application from portal and upon clicking the SUBMIT button -> Workflow will be triggered and Work item will be sent to Approver UWL list in the Portal.
Link will be displayed in the UWL list and upon clicking that link WD application need to be opened where the details will be displayed and can approve the request by clicking on APPROVE button.
Here, We have created a PFCG role which can be assigned to USER to access the WD application to create the request from portal. But for Approvers, we have not assigned any such roles except UWL role.
Workflow is working fine, Workitem is displayed in Approvers UWL but when they click on the link -> WD Application is not opening. Configuration in SWFVISU is done.
I think we are missing some roles which need to be assigned to Approvers. We cross checked by assigning SAP_ALL profile to the Approers and found WD application is getting opened and everything is working fine. But we are not supposed to give SAP_ALL in the PRD.
Please help what are the other roles that need to be assigned to Approvers.
Thanks,
Bharath.

did you try by assigning pfcg roles to approvers along with Uwl?
Regards
Srinivas

View ui layout in sap ecc for web dynpro applications is not loading

hi experts,
I have an issue while creating a view in WDA.
I can see the View pane with buttons & properties, but when i'm trying to insert an element, error occurs.
Is it the prolem with IE (my IE version is 7.0.5730.13 ) or GUI or something else ?
Can you please help me out to solve this issue.
regards,
prabhanjan
Edited by: prabhanjangeevanagari on Oct 3, 2011 9:39 AM

Those are all script errors, also check for the hosts entry for the server details that you are working on. Check with the basis team, before that in Drivers\etc\hosts file you should have an entry for this server that you are working on.

Web Dynpro UI Elements not appearing in GP

Hi everyone,
I have been developing some Development Components using the GP guide found on SDN. The first CO works just fine but for some reason, the second one I created doesn't show any UI elements and it doesn't return any error messages. Has anyone had this happen to them before?
The difference between this DC and the previous one is that I included a second view and a second window to use as a popup.
Any ideas?
Thank you very much,
Luis

The problem was I didn't include the main view in the WebDynproCO window which is why nothing was being shown.
Problem solved.

I am not able to create a callable object of my web Dynpro application

Hi,
I have my Portal server installed with NW2004S and with other components as follows.
·WAS 7.0 SP9
·EP7.0 SP9
·CAF 7.0 SP9
·VC 7.0 SP9
But now my webdynpro application is not reflecting in web Dynpro Component(GP Interface) during the design time, when I am trying to create a callable object.
So please can you suggest what is the problem and how I will get it corrected.
Regards,
Paresh.

Hi Aliaksei,
I had created a complete CAF application which was working fine. Then the server got crashed and i lost everything.So then i again installed the server and upgraded it to SP7.But than i was not able to see my web dynpro application while creating callable object. So i created another instance in the server at the base level(SP4) and i was able to create callable object.
There is no problem in the webdynpro application.I have added runtime library referece to my project : sap.com/cafeugp~api and also implemented the Interface IGPWebDynproCO in my component.
So i dont know where i am going wrong while i am upgrading the server.
Regards,
Paresh.

Web Dynpro application callable object error: Page Builder Not available

Hi, SDN Fellow.
I created a callable object of Web Dynpro application. The callable object is atatched to an Action, and Action --> Block, and Block --> Process.
I initiate the process in GP Runtime, when it comes to the Action screen the Web Dynpro application atatched to, I got the following error:
The page builder required to display this application UI inside the portal environment is not available.
As aa comparison, another callable object that atatched to a Web Dynpro component (that implement GP interface) is working fine.
Please advise.
Thanks in advance,
KC

Hi KC,
When you start your process from GP Runtime, does the actual action/callable object open in a new window?
Have a look at this SAP Note:
[Error when executing a GP task - Page builder|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_gp/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393831353137%7d]
Although the error message you are getting is different, but if your callable object opens in a new window, then the problem (in most probability) is the same as mentioned in the SAP Note.
Also, try testing the Web Dynpro callable object in standalone mode. For more information on this, see:
[Testing Callable Objects|http://help.sap.com/saphelp_nw04s/helpdata/en/4c/588041a17e060de10000000a1550b0/frameset.htm]
Bye
Ankur

Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M

Not able to run web dynpro application from portal.

Hi portal experts,
I want to run my web dynpro application from portal.
So created a seperate iview and a role for the purpose.
Assigned the iview to the role and also mapped a abap user id to the new role created.
But when I click on 'preview' the iview , getting the following dump.
Error when processing your request
What has happened?
The URL http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ was not called due to an error.
Note
The following error text was processed in the system HRM : Die URL enthält keine vollständige Domainangabe (mnghcmsap statt mnghcmsap.<domain>.<ext>).
The error occurred on the application server mnghcmsap_HRM_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system HRM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server mnghcmsap_HRM_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server mnghcmsap_HRM_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: INF51515 -l: E -s: HRM -i: mnghcmsap_HRM_00 -w: 0 -d: 20110209 -t: 121224 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please let me know if I am doing the process correctly and also let me know if I am missing somthing.
Thanks,
Aditya.

Are you able to run teh web dynpro application independtly i.e. without creatin an iview.
http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ by using this link.
or there also you are getting the error.
i guess there also you should be gettign the error.
this is some problem with the FQDN settings in the abap system.
in the host name of the web dynpro applciation server one .(dot) is must.
so you might have to change the host name to some thing like mnghcmsap. from mnghcmsap
thanks
sarbjeet singh

Adobe form data not being retrieved by Web Dynpro application

Hi,
I have created an online interactive Adobe form embedded in a Web Dynpro ABAP application. The Web Dynpro application calls a function module to update data in SAP. My problem is that the ABAP code that was generated to retrieve the data from the Adobe form and call the function module does not retrieve the data if it has been typed into any of the input fields. Oddly enough, it does work if the data is entered by using the value helps that have been placed on the form.
I would appreciate any suggestions.
Thanks!
Russell

Use messageboxes on various events to find out when your value dissapeears.
If you´re not sure about the binding, you can always drag/drop from data view tab onto the layout and check the binding which the system generates for you. Just to make sure.
Regards Otto

Exception not caught while executing web dynpro application

Hello all,
I'm getting run time error exception CX_WDR_RR_EXCEPTION not caught when running web dynpro application
The error analysis shows the custom component is locked by the user and cannot be regenerated. But I checked in SM12 for locked entries and component was not listed there.
The program terminated in the include LWDR_RUNTIME_REPOSITORYF12
Please suggest how to resolve the isse?
Regards,
anil

sorry...posted in wrong forum...

Could not run Web dynpro application

Hi
I am having ECC 5.0, now I am trying to run Web Dynpro application which is already existing,I could not run this application. In SE84 that applications are available, but in SE80, not showing. Please suggest me what could be the reason.

guess u need ECC6 for Webdynpro.For more info plz chk this link:
Web Dynpro for ABAP
Edited by: Kalyan Chakravarthi on Jan 30, 2009 11:28 AM

Web Dynpro applications not working on ECC 6.0 IDES

Hi,
I'm new to Web Dynpro and developed a custom Web Dynpro (including the application) on a ECC 6.0 IDES system. It's simple with a couple of input fields. When I test it (either via SAP GUI 7.1 or 7.2, or Web GUI), it appears on the browser ok but the screen is frozen. I can't enter anything into the fields, etc. I also tested SAP Web Dynpro applications and they act the same way, frozen screen. There aren't any errors displayed or any runtime errors in ST22. Please advise. I searched this forum but didn't see any issue similar to mine. The IDES vendor suggested I post the issue on SDN.
John

I guess it has do to with some sort of browser's font size or view settings.
press ctrl +0 make the zoom 100% and font size medium and try again.
thanks
sarbjeet singh

GP, callable object Web Dynpro Application (bespoke) not appearing in list

Similar Messages

Maybe you are looking for