GP task is not going to UWL when defining the substitution rule

Hi experts,
I have defined substitution rule for user in UWL, all task is going to assigned user's UWL
but GP task is not going .
How to solve this ??
Regards,
Piyush

Add a dummy execute sql task as first step inside loop and add a breakpoint to that for OnPreExecute event and check value of variable during each iteration to see if it gets value of each child package witin folder correctly.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

Task status not changing in UWL

Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
please let me know any workaround to solve this issue.
Thanks
Sarath

thats right.
UWL does not refresh immediately. You need to refresh the UWL again.
As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
Thanks
Krishna

BPM TASK IS not visible in UWL Inbox

Hi BPM Expert,
I am facing the big issues in BPM process Triggered problem. earlier i used to BPM start using Web service with Two entity as ID and Username but its was working fine .but i have some requirement to adding one element in Existing WSDL entity as casename , i have added that element and execute the web service using WEBDYNPRO application ,but Task is not visible in UWL inbox but earlier it was working perfectly, after adding that field ,BPm tax is not visible UWL inbox ..
Please guide me ,Its urgent...Plz plz..
Its showing error as
Technical issues is triggered during the process creation..
Thanks
sudhir

Hi ,
I am executing the WEbservice using WSNAVIGATOR but its not execute , its getting HTML log error as below..
1-Web service returned error. Fault Code: "(http://schemas.xmlsoap.org/soap/envelope/)Server" Fault String: "Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE"
2-
HTTP/1.1 500 Internal Server Error
server: SAP NetWeaver Application Server 7.20 / AS Java 7.20
content-type: text/xml; charset=utf-8
date: Sat, 26 Nov 2011 11:40:56 GMT
transfer-encoding: chunked
Set-Cookie: <value is hidden>
2e4
<?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Server</faultcode><faultstring>Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE</faultstring><detail><yq1:com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException xmlns:yq1='http://sap-j2ee-engine/error'>Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE</yq1:com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
0
Thnaks
Sudhir

Computer not going to sleep when lid closed

My wife's new MacBook Air has a couple of problems we can't figure out. First sometimes the computer is not going to sleep when lid is closed and when we lift the lid everything is frozen.
Second, the user Library folder is not seeable in her user account. I know it's there because on the side bar there's a short cut to Preferences folder which we can open.
Strange behavior.
Thanks,
Ron

Ron,
The user library folder (~/Library/) is hidden by default in Lion. I assume Apple doesn't want people mucking around with the sensitive files in there. So this is normal behavior.
As for the freezing issue, I would suggest you reset your power management and perform a safe boot to clear out caches. You should also see if the issue persists after disconnecting USB perhipherals.
Here's how:
Power Management:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Safe Boot:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).

HT1414 i have the 1st iPad. Can it be updated to iOS 6.0.1? If not how to fix-when on the internet sometimes it will just stop and go to the apps screen.

i have the 1st iPad. Can it be updated to iOS 6.0.1? If not how to fix-when on the internet sometimes it will just stop and go to the apps screen.

svargaswp wrote:
i have the 1st iPad. Can it be updated to iOS 6.0.1? ...
No.
iOS 5.1.1 is the lastest for the iPad 1.
svargaswp wrote:
... how to fix-when on the internet sometimes it will just stop and go to the apps screen.
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..
If necessary...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

We bought a new prepaid phone on 10/5/14 at a Verizon store had an existing phone number transfered and the phone can not be activate. When will the system be updated? We have lost 2 days of service.

We bought a new prepaid phone on 10/5/14 at a Verizon store. Had an existing phone number transfered and the phone can not be activatde. When will the system be updated? We have lost 2 days of service and now cannot use the original phone due to moving service to Verizon.

The exact same thing has happened to me! The customer service reps keep saying there is nothing they can do until their system upgrades are complete and they can't tell me when that will be! I need my phone number back!!! Somebody please help with this issue!

How not allow music start when conect the iphone5 to other device by using Bluetooth?

How not allow music start when conect the iphone5 to other device by using Bluetooth?

Hi Ralph,
Ty for answer. I connect my iPhone5 to my car audio system by Bluetooth. I can listen sounds from any app installed on my iPhone. The music app starts immediatly, without any command, when the connection via Bluetooth is done. It disturbs me because I want to hear sound from another application. At this moment I do not want to listen to music. I stop the music but it return again and again every time the other app stop momentarily to talk. (This is a navigation app)
I would like to know how to configure my iPhone5 to avoid this.
Kind regards
Edilson

Tasks are not appearing in UWL

Hi All,
When i am accessing UWL application in portal we are getting warning "cannot Connect to Provider".
I did connection test of the system object and the connector is working fine (using SAP Logon Tickets). When checking the UWL log I have found the following messages:
"Problem in calling BWF API to retrieve inbox items in system
SAP_ECC_HumanResources"."com.sap.portal.connectivity.ConnectivityRuntimeException: No more storage to append internal table".
Please help me on this.'
Thanks,
Ravi.

Dear Ravi
I hope you are well and many thanks for using the SAP Discussion Forums.
In relation to the scenario that you have described you mentioned the following:
When you are accessing the UWL application in portal you are getting the warning "cannot Connect to Provider You performed a connection test of the system object and the connector is working fine (using SAP Logon Tickets).
When checking the UWL log you have found the following messages:
"Problem in calling BWF API to retrieve inbox items in system SAP_ECC_HumanResources"."com.sap.portal.connectivity.ConnectivityRuntimeException: No more storage to append internal table".
Ok now in relation to the issue that you have described there are a few important points to highlight. The UWL follows and works from the concept off the UWL Destination Service Configuration.
Now although you mentioned the configurations are setup accordingly. I would like you to kindly review the UWL Destination Service Configuration as the smallest discrepancy maintained can cause unpredictable and unexpected behaviour.
SAP Note: Note 1133821 - UWL Destination Service configuration
When you followed and implemented SAP Note 1133821 - UWL Destination Service Configuration we need to make sure that connector names and also destination names match exactly (Case Sensitive).Example: I mean if your portal system alias (=UWL connector name) is for example XYZCLNT100, then the rfc destination name should be exactly XYZCLNT100$WebFlowConnector. After checking this and if you make any configuration changes
Clear the UWL Cache
Restart the UWL Service (during a period of downtime/low usage levels)
Let me provide a little more clarification regarding the importance of a correct UWL destination setup: The UWL works using two Pull operations. Firstly tasks are pulled from the backend into the UWL cache and they are then pulled a second time from the cache into the UWL User Interface. Due to this architecture there is an inherent delay in the automatic refresh's
of the UWL. There is no way, in the current architecture that the UWL can refresh instantaneously.
This is upon inital load as the cache must be built first upon logon.
So getting back to this error that you are encountering "Cannot connect to the provider". From a general troubleshooting and overview analysis guide I would like to point you in the direction of the following guideline link:
(UWL)Error message while trying to connect to provider
http://wiki.scn.sap.com/wiki/display/TechTSG/(UWL)Error+message+while+trying+to+connect+to+provider
Now to be more focused in our investigation let us seperate your two log findings.
The first of which relates to:
Problem in calling BWF API to retrieve inbox items in system SAP_ECC_HumanResources".
Regarding the exception above did you attempt to recreate any system objects to see if that resolved the issue? Also kindly ensure your authorizations are configured correctly.
Secondly
"com.sap.portal.connectivity.ConnectivityRuntimeException: No more storage to append internal table".
I would like you to review the following documentation:
KBA number: 1577547 UWL Performance Tips and Considerations
Also, you may want to take a look at our sizing guide that our colleagues colleagues in development support have written in relation to the UWL. You can find the document under this path: www.service.sap.com/sizing > sizing guidelines ' SAP NetWeaver > UWL Sizing guide
These are details that you need in order for the performance to be optimal in the Universal Worklist. Please check through the documentation to see if your parameters are set accordingly and also that you have followed the information in this document.
Kindly update me as per your findings.
Kind Regards
Troy Cronin - Enterprise Portal Support Engineer.

Email Notifications for Collaboration Tasks are Not going to Lotus Notes

Hello Everyone,
Email Notifications for the Tasks in Collaboration are not going to Lotus Notes. We are working on EP 7.0 SP14 with external ITS and backend r/3 4.7.
I performed all the configuration activities that are suggested in the below wiki:
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageId=61244035
It was worked fine once for me when i perfomed the activities mentioned in the below thread:https://www.sdn.sap.com/irj/scn/thread?threadID=147316
But after restarting our Portal Server the Email Notifications for Collaboration Tasks are not coming.
Could any one please suggest that we need to do any other configurations.Thank you.
Regards,
Sridhar.
Edited by: Sridhar on Mar 18, 2009 12:14 PM

Hi Sridhar,
I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
https://wiki.sdn.sap.com/wiki/x/g4KmAw
Please see if it helps,
Robert

MacBook not going to sleep when connected to WiFi

Hi there,
my MacBook 3,1 is not going to sleep as long as it is connected to WiFi.
It starts the process of going to sleep as my VNC connection gets dropped but it stays awake. I can easily reconnect.
Everthing else is working fine. Any suggestions?

Hello everyone,
I'm facing the same syptom. I tried many things and now havw to live with putting the MacBook to slee by hand. I had some other issues just before that:
1: The MB returned randomly from sleep while being closed. That was annoying. I think it was fixed after installing smart sleep and doing some cleanup in the preference files.
2: Then I was put "randomly" to sleep. I figured that came from overheating the processor (thus I'm gld it went to sleep). The fan speed control was set to constantly 2000 rpm. Installing fanControl helped.
3: Lid closing did not init the sleep mode and the backlight is not turning off. Niether does it wake up on opening when I put it io sleep manually (I have to press a key).
The sensor for closing the lid seems to work, if it is the same which controls the maximum brightnes of the sleep indicator light (pulsing). It is darker when the lid is closed.
I wonder if there is some settings tool.
Besides I think the issues started after the Software updates around 12th of dec. 2008, with MacOS10.5.6 and the EFI & SMC firmware updates.
I'm eager to get answers.
Kid regards, Ralf.

Project Server Task Approvals not Going into Plan

Hi,
After approving a task, we are finding that it is not going into the plan - on our separate test environment, the same steps work ok.
Any ideas?
Thanks

Hi,
Could you please let me know, if the issue is happening for only one projects or all the projects.
Also, Check for failure transactions.
select
ASSN_UID,
* from pub.MSP_ASSIGNMENT_TRANSACTIONS
where ASSN_TRANS_STATE_ENUM
=4 and
proj_uid like'Proj_Uid'
Also let me know on which patch level you are on?
Check if you have any projects affected with lost resource bug
http://blogs.technet.com/b/projectsupport/archive/2014/02/06/project-server-2013-and-project-online-what-happened-to-my-resources.aspx
SELECT DISTINCT A.PROJ_UID, P.PROJ_NAME
FROM DRAFT.MSP_ASSIGNMENTS A
LEFT JOIN DRAFT.MSP_PROJECT_RESOURCES PR ON A.RES_UID = PR.RES_UID AND A.PROJ_UID = PR.PROJ_UID
INNER JOIN PUB.MSP_RESOURCES ER ON A.RES_UID = ER.RES_UID
INNER JOIN DRAFT.MSP_PROJECTS P ON A.PROJ_UID = P.PROJ_UID
WHERE PR.RES_UID IS NULL
UNION
SELECT DISTINCT C.PROJ_UID, P.PROJ_NAME
FROM DRAFT.MSP_PROJECT_CALENDARS C
LEFT JOIN DRAFT.MSP_PROJECT_RESOURCES PR ON C.CAL_UID = PR.RES_UID AND C.PROJ_UID = PR.PROJ_UID
INNER JOIN PUB.MSP_RESOURCES ER ON C.CAL_UID = ER.RES_UID
INNER JOIN DRAFT.MSP_PROJECTS P ON C.PROJ_UID = P.PROJ_UID
WHERE PR.RES_UID IS NULL
ORDER BY P.PROJ_NAME
Thanks,
Phani

Thunderbolt drive not going to sleep when iMac does

Not sure if my title makes sense...
Ok, I have an Intel iMac running the latest version of the O/S
Attached via firewall I have a Lacie external 2big drive
Attached via thunderbolt I have a lacie 2big thunderbolt drive
When the iMac goes to sleep by itself, i.e. I walk away and let the system decide when to sleep, only the firewall connected drive shuts down.
The thunderbolt drive remains live with that nice big blue lamp on the front of the drive remaining lit.
If I manually put the imac to sleep, then both drives shut down. I'd really like both drives to shutdown properly when the system decides I've gone to bed....or gone out or whatever.
Any suggestions?

I have exactly the same problem with three lacie_2big drives. Thay do not go to sleep when my iMac is sleeping. I never had this problem untell using OS X Mavericks. Please help!

Computer not going to sleep when scheduled

FOr some reason the last couple days my system is not going to sleep even though its scheduled to in energy saver. Nothing has changed except the last update earlier this week.

Have a look at > Mac OS X: Why your Mac might not sleep or stay in sleep mode

This might be a simple question. On those sites that do not differentiate between models when on the internet I.e. Facebook when after your comment and you cannot hit "enter" on an iPad for examp. And speed is slow to connect. What is = to post?

This might be a simple question. On those sites that do not differentiate between CRT, laptop, tablet etc. such as an iPad Mini and using the Facebook site fir example when going to post a comment and you do not have a enter button on the IPad and the speed is slow how do you get your comments to post if we do not have a enter button?
<Email Edited By Host>

I don't have facebook so I cannot answer but for your personal security, I have asked the hosts to remove your e-mail address. It is very unwise to publish this.

Enable Audit on SCOM Agent An exception was thrown while processing Submit Tasks does not have sufficient permission to perform the operation.

Hi All,
An exception was thrown while processing Submit Tasks Domain\"SDK Account" does not have sufficient permission to perform the operation.
am getting this error when try to enable audit in one of Domain controllers.

Dear Mark,
i face similar problem before, i had resolve it be adding SDK service account to Operation Manager Administration group.
Regards, Ibrahim Hamdy

GP task is not going to UWL when defining the substitution rule

Similar Messages

Maybe you are looking for