GP Work Items are not coming in UWL after refresh the cache.

Hi All,
We are facing strange problem. We have cleared the UWL Cache for the GP connector and after that workitems releated to GP are not showing up into the UWL.
Any Idea.??
Thanks
Dheerendra

Hi Dheerendra,
Are you using Federation by any chance? I mean, your GP runs on one server and you are using the UWL on the other server via federation? If yes then please check if the federation has been configured correctly and is working fine.
The other thing you can check is that the GPConnector is deactivated by mistake. If yes, then activate it.
Another check can be done in the System Configuration of the System Alias you are using for the GPConnector. Check whther it is pointing the correct sustem configuration. check whether the connection tests to that system are successful.
Also check whether the GPWorkItemProvider Web Service is working.
Regards,
Ajay

Similar Messages

  • Work items are not visible under UWL in portal ?

    Hi,
    We are upgrading from SRM 5.0 to SRM 7.0.
    We have observed one issue here. Workitems are not visible in UWL in portal.
    But workitems are available in SAP inbox. i.e SBWP.
    Completed items we can see in UWL.
    Could you please let me know any idea on this.
    Regards
    Venkatesh P
    Edited by: Venkatesh Padarti on Dec 9, 2010 8:28 AM
    Edited by: Venkatesh Padarti on Dec 9, 2010 8:29 AM

    Hi Venkatesh,
    Can you please share the solution? Which base URL was wrong and where did you correct that?
    Your help is really appreciated.
    I had post the same question at SRM workflow - work Item is not being displayed If you want to reply there. I will definitely, reward with points too.
    Thanks,
    Bhavik

  • Work items are not visible  UWL task are visible in tracking in portal

    HI
    Friends
    i  am new from sap Ess/Mss implementation project...
    i am facing an Problem " Work items are not visible under UWL in portal overview page"
    but i am configured  all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
    Requestor send an Leave through portal send it successfully......but i am facing  a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
    i am configured and also registered UWL IN PORTAL..it is good..
    in sap ecc i can assigned UWL_SERVICE user to roles
    1.SAP_BC_BMT_WFM_UWL_ADMIN    
    2.SAP_BC_BMT_WFM_UWL_END_USER
    3.SAP_BC_ADMIN_USER
    4.SAP_BC_UWL_SERVICE
    PLEASE HELP ME.
    Tanks
    Shaik Rafi

    Hi All,
    In such cases, please try to check as below :
    1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
    2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
    3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
    4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
    5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
    Revert if further help is needed with more info.
    Reward points if found useful.
    Regards,
    Shri vidya S

  • LeaveRequest Work Items are not shows in SBWP TCODE workplace under outbox

    Hi
    Friends
    I used work flow 12300111 for leave request process and I activated that work flow.
    I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
    and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
    Manger Approve the leave request has been approved successfully.
    can I check whether leave request is processed in R/3.
    in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
    But in r/3 i execute the Tcode SBWP...
    here is no work items are not showing in outbox..
    Please help me
    Rafi Shaik

    HI
    Sidhu
    Tanks For Ur Replay
    i am doing as for u r note..
    AFTER DEBUGGING....
    function module-- SWK_LOCAL_OUTBOX_GET-under THERE IS NO table->SWW_OUTBOX
    PARAMETER NAMES ARE THERE(AVAILABLE)..BUT THIS  (SWW_OUTBOX) IS NOT THERE IN TABLES OPTION
    WI_LIST_S
    WI_LIST_E
    WI_LIST_F
    STATUSFILTER
    TASK_FILTER
    yes it wont be shown in sbwp outbox as it is java wd after completion you ll only see for approval in his inbox use swi5...
    IN SWI5 TCODE>COMPLETED WORK ITEMS BY AGENT AND TASK-UNDER SHOWING MY LEAVE REQUEST(GOOD)..
    CAN PLEASE HELP ME
    HOW CAN I GET THE LEAVE WORK ITEMS UNDER SBWP(OUTBOX)
    TANKS
    RAFI SHAIK

  • Leave Request work items are not showing in SBWP TCODE under OUTBOX .

    Hi
    Friends
    I used work flow 12300111 for leave request process and I activated that work flow.
    I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
    and I got  Leave request(work items) Managers in box(uwl in Manager Login in portal).
    Manger Approve the leave request has been approved successfully.
    can I check whether leave request is processed in R/3.
    in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
    But in r/3 i execute the Tcode SBWP...
    here is no work items are not showing in outbox..
    Please help me
    Rafi Shaik

    it wont be shown in outbox of SBWP
    you need to check via SWIA or rptarqdbview or SWI5 for the user
    these are java based tasks so will be done in UWL. you can see only the tasks but after approval they are disappeared.
    The outbox shows the last 30 days by default. This default cannot be
    changed. This 30 days selection period is always set when you enter
    the outbox. However, the user can change the selection period by
    clicking the button 'Change selection period' on top of the grid
    control but this as you know will be reset once you log out.
    This is how the mapping from the
    backend workplace folders to the UWL tabs should work:
    UWL tab                        Backend folder
    Notifications                  Deadline Messages
    Tasks-> Completed Tasks        Outbox -> Workitems executed by me
    Tracking -> My Requests        Outbox -> Started Workflows
    Tracking -> Forwarded          Outbox -> Forwarded workitems
    Edited by: Siddharth Rajora on Aug 5, 2011 10:04 AM

  • Few line items are not coming at the time of creation of delivery

    Dear Experts,
    When the user creating the delivery few line items are not picking in the delivery document
    the following checks i verified,
    Stock is available
    shpping condition is differ from sold to party and sales document
    Plants are same for all the line items
    why the few line items are not coming in the delivery document creation,
    please help me to sort out this issue
    Thanks and Best Regards,
    Muralidharan S

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • BOM items are not coming in Subcontracting PO

    Hi,
      I have created a Finish good material and also have made BOM for that Finish material  when I am trying to make a Subcontracting PO for that Finish material   the BOM items are not coming in PO for that Finish material only  for other material BOM items are coming properly.
    regards,
      zafar
    Edited by: zafar_karnalkar on May 29, 2010 1:48 PM

    Hi,
    Pl. recheck the BOM.
    Bom usage 1.
    Item Type : L
    SAM

  • Work items are not dis appearing in my inbox for parked FI invoices.

    Hi,
    work items are not dis appearing in my inbox for parked FI invoices.
    We are using asynchronus method, and terminating event for this method.
    Could you please suggest, what will be the reason for this.
    Thanks & Regards
    Madhu

    Hi Karri,
    Thank you for your response.
    But the event is triggering, No error message is getting.
    Any other idea about the issue.
    Thanks & Regards
    Madhu

  • After REFRESH the cached object is not consistent with the database table

    After REFRESH, the cached object is not consistent with the database table. Why?
    I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
    in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
    Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
    JDeveloper.
    How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

    qkc,
    Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
    John

  • Approved Task items are not disappearing from uwl task list

    Hi
    we have implemended Guided procedures with universal work list. For most of the users, once the any task items are approved, it suppose to disappear from the task list. But it is not disappearing from the task list. Even if i click on "refresh" under flter option. Please let me now how to get rid of this issue.
    thanks
    vijay

    Hi,
    Have a look on my reply on the thread:
    Uwl tasks status not get updated in Portal
    Regards,
    Fabio

  • Line items are not coming on next page in Bill of Lading

    When I am printing Bill of Lading, if it has around 8 line items then its printing on the first page, but if line items are more then its not printing the remaining line items on second page.
    I have one delivery with 10 line items, when I am printing it then on first page 7 line items are coming and for 8 line item only material is printing and on second page its description is printing but last two line items are not printing at all.
    Kindly help me to resolve the issue as it is very critical.

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • New GP Task Items do not appear in UWL after clear item cache of GP System

    HI, SDN Expert.
    After I made some minor change in the GP configuration xml (changing the "createdate" format from "date" to "datetime"), I went to the Cache Administration Page to clear the item cache of my GPSystem. I went to register the item types for all system in the UWL Configuration Page.
    After clearing the cache and register the item types, I started initiate some GP tasks, but now all the GP tasks are not appearing in the UWL any more.
    I remembered last time the same thing has happened, but the GP tasks started appearing only after a few hours.
    Now, it has been two hours wait, I still don't see my GP tasks re-appear.
    I wonder any of you know whether this situation is normal? What is the root cause for this situation? And how do I fix this?
    Thanks for advise,
    KC

    Issue resolved.

  • Work Items are not pulled from SRM into SAP Fiori

    Hi Friends,
    We are using Application controlled workflow in SAP SRM. As Fiori won't support application controlled workflow, I have followed the guide to configure the task as custom workflow in scenario definition. But its not pulling the work item from SRM in Fiori tile. My tile shows 0.
    When I  click on the same to go in, I am getting the below error.
    A problem occurred while reading the data
    Check the URL parameters and the scenario definition. To check the scenario definition, go to customizing for SAP NetWeaver Gateway and choose SAP NetWeaver -> Gateway Service Enablement -> Content -> Task Gateway Service -> Scenario Definition. 
    Tags edited by: Michael Appleby

    Hi Sasi,
    It would not be possible to use application controlled workflow with SAP Fiori approve shopping cart app. Please refer note 1962663 for more details on SAP Fiori approve shopping cart app.
    Regards,
    Amrutha

  • In CK86, child items are not coming

    Dear Experts,
    There is one FG - A, in the bom of A, there are 3 purchase item X,Y,Z, and one sub assembly S, procurement type of S is x (both) and its bom items are P and Q.
    But in CK86 when we excute costing P and Q are not visible. System showing costing of S.
    The same A FG is extended to other plant with same bom. But in that plant in CK86 P and Q are visible with their quantity and value.
    What mistake I have done in my plant. I am not able to understand. Please help me.
    Full points for helping answers.
    Thanks and Regards
    GR
    Moderator: Thread locked due to crossposting into ERP Financials - Controlling

    HI
    use CK86_99
    -ashok

  • Not Urgent ..... Some GP processes are not coming to UWL

    hi,
    iam initating a process using runtime.
    And after completing the first action i am sending the next action to another user which is determined by input parameter.
    But that process is not showing in the UWL,but it is coming in GP runtime.
    The process is coming in the UWL for all users which determined at the time of initiation.
    <removed by moderator -  please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] - they explain why you should not post"urgent" in here>
    With  regards
    Shanto Aloor
    Edited by: Mike Pokraka on Jul 14, 2008 6:52 PM

    Hi,
    Have you created new system in UWL Administration (System Administrator -> System Configuration -> Universal Worklist u2013 Administration) with Guided Procedures Connector?
    If no, check these links:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5
    http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/content.htm
    Otherwise, check Delta Pull Channel Refresh/Snapshot values (edit in GP system).
    Reward points if itu2019s helpful.

Maybe you are looking for