GR captured in ITM

Friends -
Goods Rcpt is an 101 movement type and does reflect in 2LIS_02_ITM...but not sure if it reflect movement 102 thats is reveral of PO i tried working through it it did not reflect not too sure ... has any one implemented the GR reversal ( 102 movement type ) using this standard 2LIS_02_ITM.....
kindly suggest/advise ...
Regards,
Ram

Hi
2LIS_02_ITM has reversal indicator 0STORNO. When 102 movement type occurs, that particular transaction will have this field check marked and it comes with reverse values for the relevant key figures.
Try one reversal of goods receipt for already created goods receipt and check your values
Regards
N Ganesh

Similar Messages

  • Excise capture in import po for free item

    Dear Friends
    I am having an issue.
    I have created an import po for free item.
    As the item is free of cost,system will hide the conditions tab item details tab.
    But we are paying the all the duties like CVD,Import Duty ,cess etc for the free item.
    The item detail tab is hidden, I cannot enter the planned delivery costs for the item
    Please advise me how can I capture Excise Invoice for the free itme in import PO
    Thnks

    The only way to do it is to assign a small notional value (like 0.01 USD) to the item, so that the conditions tab does not disappear.
    The only problem will be that the GR/IR clearing account will have an open entry, which can be cleared via MR11 with minimum accounting impact.
    Regards,
    Aroop

  • Capturing Detail Items for a Related List in a New Item Form

    I have a simple (ha!) requirement to capture Purchase Requests with the individual line items being captured in a separate List.  I have been using InfoPath, but will consider ANY solution at this point.
    If I have an Edit Item Form, I can have a Data View (LIst View Web part) that will display all related items in my Details List (using a filter on the Parent ID).  I can even add a Data Form Web Part below this to allow for the entry of a single itme
    at a time, and make the lookup field of the new item default to the ID of the parent item.
    All well and good for the Edit Item.  But if I want to do the same on my New Item Form, I am up the proverbial without a paddle because I do not have access to the ID of the Parent List Item (that is still being captured).
    So, using any of the standard SharePoint technologies (except Visual Studio), how can I create a New Item Form, in which I can enter items for a related details List and see those detail items already entered, all while capturing the original form?

    Hi Mike,
    According to your description, my understanding is that you want to get the details of the related items in New Item form.
    I recommend to edit the new item form in InfoPath and use repeating table to display the related items based on the value in the lookup column.
    Here are the detailed steps:
    Edit the new item form(listB for example) in InfoPath and then add the related list(listA for example) including all the details you need as external data source to the form.
    Choose the secondary data source added in step1 in Fields panel and then expand dataFields, then right click d:SharePointListItem_RW and select Repeating Table to insert the secondary data source added in step1 as repeating table to the form.
    Right click d:SharePointListItem_RW in the Fields panel and select Rules, then click New and select Formatting in Rules panel.
    Click None under Condition in Rules panel, then select ID field in the repeating table in the first box, select is not equal to in the second box, then choose Select a field or group in the third box and select Main under Fields, then click the lookup field
    in the form and then click OK.
    Select Hide this control under Formatting in Rules panel.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Best all purpose Audio Video Interface for capturing older Tapes,LP's, VHS?

    I'm looking at the Elgato Video Capture Interface to use with my iMac to transfer both audio and video from Record LP's, Casette Tapes, and VHS.  Wondering if anyone had any experience with getting this unit to capture just audio from an analog source?
    Thanks in advance!! 

    You did say "Best".
    Get the Grassvalley ADVC300.
    I've played around with countless other conversion systems, ranging in price from $79 to $399. Short verison, this is the ONLY unit to own. No dropped frames at all, even with questionable quality tapes, no jitter, great color, excellent sound quality. Zero setup with iMovie 06 and iDVD 09/11.
    This is a prosumer deck. The time code function is alone worth the price if you have old analog footage. Absolutely NO "Out Of Sync" audio.
    ADVC300 is for anyone who wants to do editing and is concerned about quality of color and speed, for the novice it is an incredible gizmo that will restore VHS tapes to a state close to the original fixing midtones, highlights and shadows on the fly. Not only can you simply convert analog to digital you can actually manipulate the signal going in (if you want to).
    A bit pricey but it WORKS.
    The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material.
    I would use iMovie 06 with iDVD 09/11. VERY easy and 100% "lossless"
    Now for the bad news.
    This product has been discontinued by the manufacturer. The included software (which is not really necessary but does enhance performance) is not compatible with OS 10.7 or newer.
    You can still find the ADVC300 for sale in a few outlets as well as eBay. It will sell between 50% and 100% ABOVE its retail price. Yes, it's that good.
    After lots of experimenting I get the best results using OS 10.6, iMovie 06, and iDVD 09/11.  My movies look just like Hollywood!
    My primary computer is a Mac Pro, so I just use one of the four hard drives and boot OS 10.6. You can also partition a single hard drive to achieve the same results.
    This may seem like more trouble than you want to go through.  However, I find the superior quality to be well worth it.
    (NOT my listing)  http://www.ebay.com/itm/NEW-UNUSED-Grass-Valley-Canopus-ADVC300-Advanced-Digital -Video-Converter-In-Box-/290822811418?pt=LH_DefaultDomain_0&hash=item43b663ef1a

  • Migrating from Sybase 11 to Oracle 10G : Data not Captured

    Hi,
    We are working on an interesting customer engagement - one part of the effort is to migrate our Customer's Database. Our Customer is using the Sysbase 11 Database - we are planning to migrate this to Oracle 10G.
    We are using the latest Migration Workbench - 10.1.0.4.0. We created a new user in one of our local DB Instances & used this credential to login to the Migration Workbench tool. We have the Source Files for the Sysbase 11Database.
    We tried to capture the Source Model - unfortunately, the Tool claims that the Objects have been migrated, while the Source is not captured at all. The Error Log is alos silent about any problems.
    We are flummoxed by this error as we have successfuly migrated from Sysbase in the past, but never encountered this error.
    Can you guuys please help us out with this ?
    Please do let me know if I need to post more information
    Thanks,
    Sandeep

    Sandeep,
    Have you used this user which holds the omwb repository before for a migration? When you connected the first itme, did you get a message, that the repository tables did not exist and would you like to create them?
    Are you using the connected or disconnected source model load?
    Donal

  • HOW TO TAKE SCREEN CAPTURES?

    Any ideas? I need to take some screen captures from websites. thanx a lot

    You can also use the application Grab in your Utilities folder.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    ITMS: MacOSG Podcast
     An Apple User Group 

  • Unable to capture packets on ASA(ASDM)

    Hi all,
    We have site to site VPN connection to one of our client. From which we both are accessing our applications and other resources. Now client needs to acccess two of our internal server. So we have created Static NAT in our ASA. For one server they are accessing without any issues. But the other server they are not able to connect. Since its vpn tunnel we havent blocked any ports and its open to all traffic. But their side they have restricted and we need to see whether the packets hitting our ASA or not. Once we observes this, its easy for us to escalate them. I tried packet capture wizard in ASDM. But its not showing anything. Can anyone tell me how to capture packets realated to Static NAT. Please let me know if you want anyother details?
    local 20.0.0.0/24 -->this will get natted to --->12.0.6.0/24 when going in for tunnel
    we have created
    static(outside,inside) 12.0.6.10 20.0.0.10 255.255.255.255 working
    static(outside,inside) 12.0.6.11 20.0.0.11 255.255.255.255 not working, we need to check whether its hitting 12.0.6.11
    Kindly advise...
    Regards,
    Bala

    Where are you trying to initiate the connection from?
    If they are trying to initiate the connection towards your end, and the traffic doesn't reach your end, then there will be nothing on your ASA packet capture.
    Please share what you have configured to capture the traffic?
    To check if the traffic is reaching the inside interface, just configure ACL between source (real IP) and destination (remote IP), and apply the capture on the inside interface. This will confirm if the traffic is coming inbound towards the inside interface.
    To check if the traffic is leaving the inside interface towards the host behind your ASA, configure ACL between source (remote IP), and destination (host real IP), and apply the capture on the inside interface. This will confirm if the traffic is leaving your ASA inside interface towards the host.

  • Unable to capture video with MSI StarForce 822 GeForce 3!

    I have a MSI StarForce 822 GeForce3 graphics card with 64 MB DDR SDRAM on it. I have VGA Out, as well as TV-out (AV), TV-out (S-video), and TV-in(?) (S-video).
    This brings me to two questions:
    First, I have NEVER been able to figure out how to use the TV-in (S-video) port. I have tried numerous programs designed to capture video, including the one that came with the graphics card, and none of them recognize the card's TV-in. Do you have any recommendations as to how to use this port to capture video?
    Second, in reading through the online manual for the graphics card on the company's website (under the name G3 Pro-VT64D MS-8822), I saw that the card supposedly has the capability of "High-quality HDTV/DVD playback" (8822 v2.0.pdf, page 8 ). However, in playing back DVD's through the card's s-video output onto my HDTV-ready monitor, I definately do not see HD quality videos. Could explain why this is the case?
    I have an assignment coming up where I must do some video-editing work, and thus I am posed with a situation where I need to capture video using this card (and I can't afford to buy something new for the moment).
    Thanks for your help.
    Charles Bergmeier

    If you have the Video Capture Driver installed then the video capture program should see it. On MSI site version 1.16 of the driver is available for download.
    If you still have problems (e.g. too many frames lost) you can try using Virtual VCR (worked best in my case).

  • Unable to Capture PAL DV footage

    I'm working on a project that requires I edit with both PAL and NTSC footage shot on mini-DV. I was about to purchase a plug-in to convert the PAL footage to NTSC, but find that I can't even capture the PAL footage to begin with.
    I tried using both a deck and a camera as the source device to capture from and they both play the tape just fine and on the camera's LCD (not a PAL camera by the way), I can view the footage perfectly, but still FCP does not acknowledge any video on the tapes.
    I've even tried capturing on iMovie-it tells me that the footage can't be captured because it is 'half-frames' and mentions LP and SP modes. Would this really matter and why does my camera play it just fine?
    Also, when I play the tape on the camera and plug-in to a television, the picture keeps rolling, but again, plays perfectly on my non-pal camera.
    I've tried switching all pre-sets to PAL, but it doesn't help.
    I'm about to make a dub tape with a PAL camera (Sony Z1U) and see what happens, but if anyone has any other suggestions, I'd really appreciate any help.
    Thanks.

    I tried using both a deck and a camera as the source device to capture from and they both play the tape just fine and on the camera's LCD (not a PAL camera by the way), I can view the footage perfectly, but still FCP does not acknowledge any video on the tapes.
    I have never seen an NTSC camera that plays PAL tapes!
      Alberto

  • Unable to capture return values in web services api

    At the time of login to web services if my server is down ,
    it returns following error :
    java.lang.StringIndexOutOfBoundsException: String index out of range: -1
            at java.lang.String.substring(String.java:1438)
            at java.lang.String.substring(String.java:1411)
    I want to capture this error so that i can try another server to login. how do i capture this error
    Another place where i want to capture the return Value is when i look for a report on the server
    rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
                               "@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
    oInfoObjects = rh.getInfoObjects();
    CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
    Here if the report is not there on the server , it returns a null handler exception.
    but if i try catching it by checking my responsehandler is null  like rh == null  it does not catch it.
    Any help will be appreciated
    thanks
    Rakesh Gupta

    Ted : i have two cases
    1)   server = server_st.nextToken();
        providerURL = "http://"server"/dswsbobje/services";
        sessConnURL = new URL(providerURL + "/session");
       Connection boConnection = new Connection(sessConnURL);
       Session boSession = new Session(boConnection);
      EnterpriseCredential boEnterpriseCredential = new    EnterpriseCredential();
                  boEnterpriseCredential.setLogin(userid);
      boEnterpriseCredential.setPassword(pwd);
      boEnterpriseCredential.setAuthType(auth);
    SessionInfo boSI = boSession.login(boEnterpriseCredential);
    I have got a list of servers running web servcies stored in my tokens. when i pass the first server name say " test:8080" and that server is down , i want to catch somewhere in the code above that it did not get the connection so that i can loop back and try with the second server say test1:8080
    This is for failover purposes.
    at present when i was trying to capture return value of boSI it  breaks giving the error
    java.lang.StringIndexOutOfBoundsException: String index out of range: -1
    at java.lang.String.substring(String.java:1438)
    at java.lang.String.substring(String.java:1411)
    2nd case :
    I am geeting reports from the server and scheduling them:
    i run the following code which works fine if reports is there
    rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
    "@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
    oInfoObjects = rh.getInfoObjects();
    CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
    Here if  the  report  is not there on the server  then i should be able to catch from the response handle rh that it has got a null value.
    but rh does not return a null value 
    the code ultimately throws a null handle at the following line
    CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
    i am not able to catch the null value there also.
    hope you got my issue.

  • Unable to capture data in an editable dynamic ALV.

    Hi ,
    I have created a dynamic editable ALV whose displayed structure can be changed at runtime based on the selection in a drop down list value selector.
    Im trying to capture the values entered in the ALV into an internal table before the user changes the structure of the ALV to a different structure.
    In the ON_SELECT event handler of the drop down list box , im rasing a data_check event to capture the ALV data.
    The problem is that the control is not entering the event handler for the data_check event.
    If i raise the data_check event in my save event handler or any other event handler , it works fine.
    Can someone please suggest a solution.
    Regards,
    Newton.

    Hi ,
    I have figured out that the problem is local to my machine , because the code works fine on other machines.
    I guess my internet explorer has some bug.
    Regards,
    Newton.

  • Unable to capture audio

    Hi,
    Last week I updated the drivers for my Blackmagic Multibridge extreme. Now when I try to capture the material in FinalCutPro 5.1.4 I can see the picture, hear the sound on my monitors (they are connected directly to Multibridge), but the captured material doesn't have sound, because it takes the sound from the internal audio input. I tried to capture from Blackmagic Deck Control (an external application) and it works fine, it captures with sound. So I suspect I have to change the audio input in FCP, but dont know where. In audio/video settings in FCP everything is set to DeckLink (Multibrige extreme).
    Where is the problem?
    Thanks,
    Simon

    Thanks for the reply.
    Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

  • Unable to capture from DV tape

    I was given a Mini DV tape and when I try to capture it starts the first few seconds and stop with the following message:
    "Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. Capture has been aborted and your clip has been saved."
    Any ideas what might be wrong and how I can resolve it?
    Thanks.

    Hi Steve,
    There are several causes that can lead to that problem.
    Just copy and paste the error message in the search area of the forum on the right hand side of this page and you will get a number of useful hints.
    Best,
    G.

  • Unable to capture the parameter values from a PL/SQL procedure

    hi.
    i'm trying to capture the parameter values of a PL/SQL procedure by calling inside a anonymous block but i'm getting a "reference to uninitialized collection error" ORA-06531.
    Please help me regarding.
    i'm using following block for calling the procedure.
    declare
    err_cd varchar2(1000);
    err_txt VARCHAR2(5000);
    no_of_recs number;
    out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
    cntr_var number:=0;
    begin
         rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
         dbms_output.put_line('The error is ' ||err_cd);
         dbms_output.put_line('The error is ' ||err_txt);
         dbms_output.put_line('The cntr is ' ||cntr_var);
         for incr in 1 .. OUT_SIGN_TAB.count
         loop
         cntr_var := cntr_var + 1 ;
    Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN_TAB(incr).txn_type||','||OUT_SIGN_TAB(incr).objid);
    end loop;
    end;
    Error is thrown on "for incr in 1 .. OUT_SIGN_TAB.count" this line
    Following is some related information.
    the 3rd parameter of the procedure is a out parameter. it is a type of a PL/SQL table (SEARCH_SIGN_TAB_TYPE) which is available in database as follows.
    TYPE "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
    TYPE "SEARCH_SIGN_TYPE" AS OBJECT
    (ref_no VARCHAR2(22),
    ciref_no VARCHAR2(352),
    ac_no VARCHAR2(22),
    txn_type VARCHAR2(301),
    objid VARCHAR2(1024))............

    We don't have your rt843pq procedure, but when commenting that line out, everything works:
    SQL> create TYPE "SEARCH_SIGN_TYPE" AS OBJECT
      2  (ref_no VARCHAR2(22),
      3  ciref_no VARCHAR2(352),
      4  ac_no VARCHAR2(22),
      5  txn_type VARCHAR2(301),
      6  objid VARCHAR2(1024))
      7  /
    Type is aangemaakt.
    SQL> create type "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
      2  /
    Type is aangemaakt.
    SQL> declare
      2    err_cd varchar2(1000);
      3    err_txt VARCHAR2(5000);
      4    no_of_recs number;
      5    out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
      6    cntr_var number:=0;
      7  begin
      8    -- rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
      9    dbms_output.put_line('The error is ' ||err_cd);
    10    dbms_output.put_line('The error is ' ||err_txt);
    11    dbms_output.put_line('The cntr is ' ||cntr_var);
    12    for incr in 1 .. OUT_SIGN_TAB.count
    13    loop
    14      cntr_var := cntr_var + 1 ;
    15      Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN
    TAB(incr).txntype||','||OUT_SIGN_TAB(incr).objid);
    16    end loop;
    17  end;
    18  /
    The error is
    The error is
    The cntr is 0
    PL/SQL-procedure is geslaagd.Regards,
    Rob.

  • Unable to Capture SD video

    I have been using CS5 to capture video with no problems until the last few days. I am using CS5 with all updates, Nividia GTX 470 (updated to newest driver), I have tried to capture using a Canon XL2 (PAL) camera and a Sony z5 (using sd settings). What I see in the capture screen is just black - no footage or audio at all. I can control the camera from the PPro capture window ie play it, stop it, rewind etc...
    I have read other posts relating to this problem and have tried their suggestions (logging on with administration rights etc) This is the first time that this has ocurred after many years capturing without problems with PPro. I have tried Scenalyzer but get the info saying something like  that no video is coming from the drivers. I have tried different firewire connections and have installed a new firewire card I have mada a fresh installation of both OS and adobe software.  Any help appreciated!
    Windows 7 64bit Ultimate
    !2 gigs RAM
    i7 930
    Asus P6t
    Nvidia GTX 470

    SUCCESS!...I seem to have found a solution - still not sure what happened but when I installed the firewire card, I disabled the onboard 1394 connection in the bios ( I didn't think I would need it.) Anyway, I re-enabled it and connected my XL2 to the onboard 1394 firewire and it worked! BTW, this was all done on my main Video editing PC and not on the different pc, I said I would.

Maybe you are looking for