GR/IR Control.

Hi,
We had defined a new document type called as SP for service procurement with account assignment as F and item category as D. The field selection group attached to this order type is FOF ( Copy of Frame work order ).
Now i am unable to see the delivery completed indicator in the PO, when i am trying to open the PO in the change mode. where as it is available for the field selection group NBF.
I tried to make it as optional field in the following field selecction group as FOF and the AKTV ( for change )
Pl suggest how to make this field availble in the change option of the PO for the document type FOF.
Regards,
RitiG

Hi Priya..
I am having a same kinda issue like this...
My client has got the error "not possible to enter services : (final entry indicator set)"
But he want to post the service entry sheet.
So i revoked the acceptance in SES and I cancel the final entry indicator..
Now no service entry sheet has final entry indicator..
But its still showing the same error. in the long text of the error, "its showing final entry indicator has been set in P.O". But as for my knowledge there is no final entry indicator in the P.O.
Do u have any solution for this..
Thanks in advance
Regards
senthil kumar

Similar Messages

Issue in creation of control cycle

Dear Gurus,
During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
I compared control cycle in a different ECC system where source information is appearing.
How can make the screen appear in my ECC system.
Please find the screenshots.
Any pointers will be highly appreciated.
This thread is further to the threads in Production Planning and LE/WM Forum. I could not resolve the issue with the threads.
Hope that I will get any pointer in EWM forum.
http://scn.sap.com/thread/3609441
http://scn.sap.com/thread/3610822
With Regards,
Malay

Hello Malay,
Can first contact your ABAPer and ensure the bottom screen is not an Screen Enhancement?
If it is a some custom development, your ABAPer can help you on the logic behind it.
Else, Let us know.
Regards,
Sathish

IF-statement in Personas that is checking if control is inactive?

Hi,
I have this simple script in screen personas that is clicking the option: "Attachment list". Everything is working great if there is attachments.
If there are no attachments the option is "inactive" or "greyed out". This will result in a script error.
I thought this was going to be an easy fix by adding IF statement to the the script. But howerver I specify the critera for the IF statement the script will always try to click the Attachment list. The condition will simply always be TRUE.
Am I missing something here or is it not possible at this time to script an IF statement that is checking if the control is inactive or similar?
Best Regards,
Oskar Söderlund

There is another way, but it will get a little tricky.
Outside of the transaction IE03 you can check for the existence of attachments for a piece of equipment by looking in table SRGBTBREL. Field TYPEID_A will be "EQUI" and field INSTID_A will be the equipment number, zero-padded on the left to 18 characters long. Use SE16 to look in the table and you'll get the idea.
You could wrap this test in an RFC-enabled ABAP function and call that from your Personas script button. Use the return value from that RFC to decide if attachments exist or not and how the script should respond. Details for how to write such an RFC and call it from a Personas script are in this blog: Calling RFCs from a Personas script.
Like I said, this isn't straightforward and perhaps Personas scripting should include an active/inactive test in addition to the exists/doesn't exist test. Until then, however, there is a way if you don't mind a bit of ABAP programming.

ANY SY-INDEX REFLECT CHANGES WHEN CONTROL BREAK STATEMENT PROCESS

Dear Guru's,
                 I have a requirement where i have to move the values to variable when control break (AT END OF) process. So i want to move the values according to the end of Vendor so for that i want to know is there any sy-index available which reflects changes when Control break (AT end of) process.
LIKE Sy-subrc = 0 when select statement fetches record or sy-tabix is like counter for loop.
Hope to get reply soon.
Regards,
Himanshu Rangappa

Hi,
There is no system Fields for it.
But your requirement can be done with 'AT NEW' and 'AT END' statement.
Refer this sample example,
loop at otab.
    at new module.
      move otab-module to otab2-module.
    ENDAT.
      at END OF effort.
      sum.               "Do your calculations here
      move otab-count to otab2-count.
      append otab2.
    endat.
endloop.

Using AiO Remote and HP ePrint to remotly control printer

Hi,
With ePrint Home and Biz and the previous version of the AIO remote app, I was able to control the scanner and printer as long as I remained connected to the Internet. In other words, I did not have to be within reach of the wireless network at home to be use the wireless features of the HP Office Jet Pro 8600. I cannot find the way to scan or copy any documenta even if not at home. All these could be done if there was someone at home who would be able to place the documents on the glass.
Is this feature available the HP connect and current ePrint?
Thank you,
Alvaro A.

Hello traveler021,
Welcome to the HP Support Forums!
Regarding your question about the AiO Remote app and ePrint when trying to scan or copy with the Officejet 8600, you have to be on the same WiFi network.
The AiO Remote app does not allow you to control scanning or copying over the Internet. I do apologize for being the bearer of bad news, but this is not available without being on the same network.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Lenovo AIO C440 - not working infrared remote control

Hello,
is there any hint how to get infrared remote control working for a new C440 model? Tomorrow I will try to measure and/or replace batteries which could be bad. For now it is totally not working.
Another question: the remote should work only within AverMedia TV app or in the whole Windows 8?
Regards,
Zdenek

hi bohdik,
Welcome to the Lenovo Forums.
The IR Windows Media Center remote control is for use with C440 models with optional TV tuner. If you have this model, make sure the TV Tuner driver and the ITE CIR Driver from the lenovo support site are installed under Device Manager (press Windows Key+R then type devmgmt.msc) then follow the Set up a TV signal in Windows Media Center. guide.
Note:
You must have Windows 8 PRO to enable Windows Media Center
See this articles in reference:
How to add Windows Media Center to Windows 8 Pro
How To Install And Set Up Media Center On Windows 8
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Issue with Period Control 03 for Depri key MSTL with 6446

Hi Gurus,
We want to use mid-month calculation for Dep. key MSTL using period control 03 (i.e. 03/03/03/03). We are also using 6446 as year-depedent Fiscal year (i.e. Jan and Dec 6 weeks other rest 4 weeks). period control 03 is pro rata at mid period
period 12 for 2009 start 11/14/09 ends 12/25/09
period 1 for 2010 start   12/26/09 ends 02/05/10
as per period control 03 mid month is Dec-04-2009 (setup in OAVH)
When i acquire an asset on Dec-04-09, the dep start date is Nov-14-09 which is correct and all calculation is correct
however when i acquire an asset on Dec-06-09 the dep start date is still Nov-14-09 which is not correct infact it should start dep from next month which will be Dec-26-09 (This is 1st period of Fiscal year 2010)
As mentioned above we are using 6-4-4-6 fiscal year
When acquiring an asset with mid month concept at year end we are facing problem in depri start date and hence calculation.
The setting in OAVH for period control 03 are as below
FV   Period Control     Desc.                             Year   Month   Day    Period    MidMonth
NL        03              Pro rata at mid period          2009    12        4         12           ticked
NL        03              Pro rata at mid period          2009    12        25       12           ticked
NL        03              Pro rata at mid period          2009    12        31        1            ticked
NL        03              Pro rata at mid period          2010    1          15        1            ticked
Thanks in advance

Deepak,
Your period 12/2009 starts and ends between 11/14/09 ends 12/25/09. Now you acquire an asset on 12/4/2009. As per OAVH, you want depreciation calculation start mid-period. Then how is depreciation start date of Nov 14, 2009 for this case?
Then you acquire an asset on Dec6, 2009. This, as per OAVH, falls into period 12/2009. Then why should the calculation start from period 1/2010 for this case?
Thanks,
Asheesh

Jabber Windows - no phone control with LDAP Custom filter

I am unable to control the desktop phone from the Jabber 9.1 Windows client when the CallManager LDAP Directory uses a Custom Filter.
Has anyone else experienced this?
If I set the LDAP Custom Filter to <none> and save, then Desktop Phone control works great.
If I set it to use my custom filter, then trying to enable Desktop control just gives me the spinning circle, then times out to the Red X symbol.
I do not need to resync the LDAP Directory to get the error, just enable/disable the custom filter and save.
In both cases calling from the Computer works great.
This is an On-Prem deployment with full MS-AD LDAP integration.
Versions are:
Jabber - 9.1.0 build 12296
CUPC - 8.6.4.11900-1
CUCM - 8.6.2.22900-9
I upgraded to CUCM 8.6.2 SU2 last night hoping that would fix the problem, but no luck.
The LDAP filter is one I have used in numerous other clusters with no CTI issues.
It allows me to sync to the root directory, but only import active user accounts with an entry in the ipPhone AD attribute:
(&((objectclass=user)(ipPhone=*))(!(objectclass=Computer))(!(UserAccountControl:1.2.840.113556.1.4.803:=2)))
Thanks, Randy

Hi Randy,
Have you specified this base filter in jabber-config.xml file? As per Admin Guide:
"In some cases, base filters do not return query results if you specify a closing bracket in your Cisco Jabber for Windows configuration file. For example, this issue might occur if you specify the following base filter: (&(memberOf=CN=UCFilterGroup,OU=DN))
To resolve this issue, remove the closing bracket; for example, (&(memberOf=CN=UCFilterGroup,OU=DN)"
Thanks,
Maqsood

Get selected values from Listbox control

Hi All,
I'm still new to SL so please bear with me.
I have a ListBox being bound with some records from a DB. Here's the xaml:
<ListBox x:Name="lstClassSeries" SelectionMode="Multiple" DisplayMemberPath="Description" Grid.Row="11" Grid.Column="1"></ListBox>
What I need is to get the values of the items that were selected and I can't seem to get it to work. I've tried looping through the SelectedItems but there's no property for value or text. I even tried to cast the item as a ListBoxItem but I
get the following error:
Unable to cast object of type 'UI.Silverlight.TransactionService.DTODropDown' to type 'System.Windows.Controls.ListBoxItem'.
How can I get the values of the items selected?
Thanks

You're using windows forms style techniques with xaml.
This is a bad idea.
You ought to learn MVVM.
You probably don't think you want to learn it, but trust me on this one.
Learn MVVM as soon as you can.
There's a selecteditems collection.
You have to cast to listboxitem, it has a content property which you cast to whatever you put in there originally.
Here's a snippet.
I have a class foo, load a bunch of them in. Do stuff. Work out what's selected in the click event of a button.
public class foo
public int id {get;set;}
public string description {get;set;}
public partial class MainPage : UserControl
public MainPage()
InitializeComponent();
lb.Items.Add(new ListBoxItem{Content=new foo{ id=1, description="a"}});
lb.Items.Add(new ListBoxItem { Content = new foo { id = 2, description = "b" } });
lb.Items.Add(new ListBoxItem { Content = new foo { id = 3, description = "c" } });
private void Button_Click(object sender, RoutedEventArgs e)
List<foo> selectedfoos = lb.SelectedItems.Cast<ListBoxItem>().Select(x=>x.Content as foo).ToList();
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Open and close posting period authorization control TCODE: S_ALR_87003642

HI All,
Is there any chance to control the user to open and close another company code posting period variant in TCODE: S_ALR_87003642.
In our system we are using the same client for different countries. So user can able to change the other country company code posting periods.
We would like to control either on the country (or) organizational unit(company code) (or) posting period variant so that user can only open/close their country / company code posting periods.
Our present authorization role for open and close posting period contain the auth.Obj. : S_TABU_DIS.
Please share your knowledge if you come across this problem..
Thanks in advance..

Hey Sandhya,
Congratz, this can be done using linbe item authorization with the object S_TABU_LIN.
Field ORG_CRIT - Value 02
Field ORG_FIeld1 - Value ZT001B
We have successfully done it in our client.
You need to contact your BASIS consultant for this.
Thanks,
Nitish

Timing control signal and data acquisition

I have a series of relays which when activated will close different elements of a circuit and I also have a sourcemeter(Keithley) sending a constant source current and reaing the voltage back.(But when no relays are closed the circuit is open and no source current flows )
I have a microcontroller(pgmmed for 9600 baud rate) based hardware circuit which closes different relays sequentially based on the input it recieves from labview pgm passed on through a Rs232 cable(9600/8 bit/no flow control)
So i made a sequence structure of sending signal to microcontroller signal then wait for the signal transmission and realy activation and then read the voltage value form keithley sourcemeter back to labview thro a GPIB cable.
These three events are reapeated sequentially in a while loop.
A schematic picture is attached.
BUt the problem I ma facing is the maximum speed of reading is limited to 200msec/reading even thought the relay activation time is as low as 30 msec.
I tried with many different delay times (140-60 msec...but more or less each reading takes up 200msec irrespective of the delay time..)
What could be the bottle neck is it the Rs232 setting at 9600 baud rate..can changing that to higher baud rate/including flow control solve this problem?
Attachments:
daq_printscreen.GIF ‏45 KB

siva0182 wrote:
Find attached the picture of the vi where I tried to put in timers.one in each of the frame and at the end added one more frame just to measure the time elapsed .
The last frame and the frame with sourcemeter measurment show adifference of about 140 msec.
Is there any way to improve the speed of this portion?
Probably not. It sounds like the Keithly VI is taking 140 msec. You can try opening that up to see if there is anything in there that could be causing an unnecessary slowdown. But trying to tighten it up too much may cause occasional errors (such as timeouts) in trying to get a response back.
But surprisingly I tried displaying the actual timer value at the start and at the start of sourcemeter read function ..but the display of both indicators is almost equal with little difference of only 10 msec.????? I'm not sure which of the several timers you are referring to here. What is the value going into the wait function between the VISA write and the Keithly VI?
When you do benchmarking, the timer functions should be in a frame all by themselves. Having it mixed with another function or VI causes a bit of uncertainty as to when the time was taken. For instance, you dont' really know if the Keithly VI was started before the time was taken or after. (The time was probably taken first, but without a data flow or sequence structure dependency, you can't be sure.)

How Do I Load An Animated GIF Into PictureBox Control From Byte Array?

I'm having a problem with loading an animated GIF int a picturebox control in a C# program after it has been converted to a base64 string, then converted to a byte array, then written to binary, then converted to a base64 string again, then converted to
a byte array, then loaded into a memory stream and finally into a picturebox control.
Here's the step-by-step code I've written:
1. First I open an animated GIF from a file and load it directly into a picturebox control. It animates just fine.
2. Next I convert the image in the picturebox control (pbTitlePageImage) to a base64 string as shown in the code below:
                if (pbTitlePageImage.Image != null)
                    string Image2BConverted;
                    using (Bitmap bm = new Bitmap(pbTitlePageImage.Image))
                        using (MemoryStream ms = new MemoryStream())
                            bm.Save(ms, ImageFormat.Jpeg);
                            Image2BConverted = Convert.ToBase64String(ms.ToArray());
                            GameInfo.TitlePageImage = Image2BConverted;
                            ms.Close();
                            GameInfo.TitlePageImagePresent = true;
                            ProjectNeedsSaving = true;
3. Then I write the base64 string to a binary file using FileStream and BinaryWriter.
4. Next I get the image from the binary file using FileStream and BinaryReader and assign it to a string variable. It is now a base64 string again.
5. Next I load the base64 string into a byte array, then I load it into StreamReader and finally into the picturebox control (pbGameImages) as shown in the code below:
byte[] TitlePageImageBuffer = Convert.FromBase64String(GameInfo.TitlePageImage);
                        MemoryStream memTitlePageImageStream = new MemoryStream(TitlePageImageBuffer, 0, TitlePageImageBuffer.Length);
                        memTitlePageImageStream.Write(TitlePageImageBuffer, 0, TitlePageImageBuffer.Length);
                        memTitlePageImageStream.Position = 0;
                        pbGameImages.Image = Image.FromStream(memTitlePageImageStream, true);
                        memTitlePageImageStream.Close();
                        memTitlePageImageStream = null;
                        TitlePageImageBuffer = null;
This step-by-step will work with all image file types except animated GIFs (standard GIFs work fine). It looks like it's just taking one frame from the animation and loading it into the picturebox. I need to be able to load the entire animation. Does any of
the code above cause the animation to be lost? Any ideas?

There is an ImageAnimator so you may not need to use byte array instead.
ImageAnimator.Animate Method
http://msdn.microsoft.com/en-us/library/system.drawing.imageanimator.animate(v=vs.110).aspx
chanmm
chanmm

In alv report can i use control break events? if no .whay?

Hi all,
in alv report can i use control break events? if no .whay?

hi,
you can use control break statements in ALV report.
for example: if one PO is having more than one line item, that time you need to display PO only once.

Excel-2007 cannot connect to Oracle ODBC data source, Control Panel can.


I cannot make an ODBC connection from Exce-2007 to Oracle work. I am an expert Excel and VBA user (since 1994) and I have frequently used Excel to access ODBC databases, including Oracle (I have done this with Excel-2003 both with worksheet queries and have written VBA ADO-connection routines). And even though in Excel-2007 a worksheet ODBC query is supposed to be easier to create than in previous version of Excel, my connection fails. Any suggestions and all help are welcome and much appreciated.
DETAILS


1) What is my system? I am using Excel-2007 on Windows Vista x64 and Oracle server v.11g on my computer (all this is on my computer, no network issues).
2) Why use Excel with Oracle at all? I use Excel-2007 to access Oracle rather than Access-2007 (or any other application like TOAD, etc.) because I do engineering calculations with the data stored in Oracle. These calculations are easier done in Excel (I suppose that one alternative to this could be to use some sql or Access to get the data from the database, then store it as plain vanilla CSV file, then open this file in Excel, then do the math (the math involves complex optimisation algorithms), then save the results as CSV, then use some sql or Access to put the data back into the database. Howwever this does not strike me as a quick or neat solution. And after all Excel has been designed to access ODBC databases, so why not use it?)
3) What do I do in Excel-2007 that won't work? I create an ODBC link to Oracle that does not work. In Excel-2007 this is straightforward:

<ul>
<li>define an ODBC connection (Data tab --> From other sources --> From data connection wizard);</li>
<li>define a query on the worksheet -- that's it, this is all!</li>
</ul>

I start with creating an ODBC connection:
a) I choose an ODBC data source type: ODBC DSN
b) Excel-2007 displays the list of the available ODBC data sources. I see in it my Oracle database name and I select it.
c) Excel-2007 displays the Data Link Properties:
- the "Provider" has a list of the OLE DB drivers with preselected "Microsoft OLE DB Provider for ODBC Drivers". I keep this default selection.
- the "Connection" tab has a connection string "DSN=<my database name>" which I keep, it also has fields for the user name and the password, which I fill with the correct credentials.
- Finally there is a button "Test Connection", which when I click produces the following error message:
"Test connection failed because of an error in initializing provider. 
Unespecified error"

4) Additional food for thought:
a) In the above walk-through the only data, which I type, are the user name and password, everything else is selected from lists offered by Excel-2007, hence any possibility of typos being the cause of the problem can safely be discarded.
b) I can test the ODBC driver in the Control Panel and it shows that it can connect to the Oracle database:
- in Control Panel --> Admin Tools --> Data Sources (ODBC) on the "User DSN" tab I can see the list of the available ODBC data sources (same list as in Excel-2007, point 3b above) with the name of my database in it;
- selecting the name of my database from the list of the sources and clicking "Configure" button opens a tab with Data Source Name (same as in Excel-2007), TNS Service Name and User ID. I enter <user name>/<password> and click "Test Connection" button. A message "Connection successful" appears (just for a test I enter incorrect user credentials and "Unable to connect" message appears)
BOTTOM LINE


The procedure for using an ODBC connection from Excel is very simple, in the past I have created and used such connections numerous times with Excel-2003 and earlier on Win-XP and earlier. But now on Excel-2007 and Vista-x64 I cannot make it work.
Also, testing an ODBC connection driver is really easy and simple to be done in the Control Panel. There testing the same ODBC connection, which fails in Excel-2007, results in success.
I am frustrated by the simplicity of the problem and yet the persistant error. I have lost now two full days in failed attempts to make the simple procedure work and in searching the internet for answers.
All help is highly appreciated <img class="emoticon" src="images/emoticons/happy.gif" border="0" alt="" width="16" height="16" />,
Plamen


Did you find the solution to your problem?
If not, I think I may know.
Excel 2007 is a 32-bit application.
When installing 32-bit applications in a 64-bit environment, the "default" location is:
C:\Program files (x86)\...
Excel then launches from this location.
However, when it connects to Oracle and passes the name of the calling program, Oracle attempts to "interpret" the value of (x86) as if
the value within the parenthesis are being passed as a reference. Of course, iOracle doesn't find anything, so the result is (),
and then it cannot return the connection info back to the calling application.
I corrected it by installing Excel in C:\Program Files\, and once launched from that location, it works the same as on the 32-bit machines.
However, at my location, they are FORCING Excel to be installed in the(x86) location.
What I'm trying to discover now is:
Is it possible to flag Oracle to NOT process the embedded variables?
Or, is it possible to assign a variable in Oracle such that x86 = "(x86)", so that the end result is viable?
Have you had any luck with your installation?
thanks,
Paul

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How can I display and change built-in symbols of a tree control programmatically?

I want to set the built-in symbols of a tree control during runtime.
I only found an example to assign custom pictures but not how to select one of the 40 built-in symbol.
Many Thanks
Solved!
Go to Solution.

The ActiveItem.SymbolIndex will allow you to select the symbol for the active item. You can use the ListBox Symbol Ring Constant (Dialog and User Interface palette) to select a symbol (or you can just enter the number directly if you know what it is).
Message Edited by smercurio_fc on 07-10-2008 09:36 AM
Attachments:
Example_VI_BD6.png ‏2 KB

GR/IR Control.

Similar Messages

Maybe you are looking for