GR non-valuated indicator controlled by the Account Assignment Category

Dear Gurus,
In standard customizing, is it possible to do a configuration so that the GR non-valuated indicator in the PO  is controlled by the Account Assignment Category. For example:
1. For Acct Assignment Category = A (Asset), the GR non-valuated indicator is disabled (grey out)
2. All other Acct Assignment Categories, the GR non-valuated indicator is enabled (not grey out)
Appreciate your kind feedback.

Which checkbox or radio button specifically ?
It's not the 'GR non-valuated' checkbox or the 'GR non-val binding' checkbox right ?
I can't find any radio button for 'GR non-valuated' so that I can set it to 'display' or 'hide' either.
Perhaps I should elaborate a bit more:
Disabled = Box is grey out = Non Modifiable = Cannot tick even if you wanted to, Cannot untick even if you wanted to
Enabled = Box not grey out = Modifiable = Can tick if you wanted to, Can untick if you wanted to

Similar Messages

  • Validations in srm for the account assignment category

    here is the requirement.
    After selecting the account assignment category i want to make some fields as mandatory like GL account. how can i do that.
    thanks
    kishore

    Hi Kishore,
    First of all let me tell you that I don't know the answer of this query. But I too had same problem in one of my previous project.
    Frankly speaking, If we think over this issue from FiCo (specifically controlling)  point of view- allowing users to choose G/L account would not enforce any hard control over G/L account selection which could cause terrible issues in reporting within Controlling. In order to exercise hard controls to ensure accurate reporting, I guess this selection of G/L account by user should be refrained.
    Functionally, best possible solution would be to devide that particular product category into sub-categories (new prd categories) which would then have 1-1 relation with G/L accounts. Probably you can have a word with your Finance guy and let him know the consequences.
    Please let me know your views.
    Regards,
    Amit

  • What is the differences between the account assignment category of E and M?

    Hi, I have a question about account assignment category.I hope someone give me the answer , and I would appreciate it.
        as you know, there are so many account assignment categories (e.g. A:asset,K:cost center)in sap customizing,when we want to purchase asset, we will input A to the field of account assignment category in purchase order.
         When will we input E or M in purchase order? What will it imply when we input E or M in purchase order? What is the differences between the account assignment category of E and M?
    Best Regards
    Bob Wang

    Vijay,Thanks for your answer,but I am still not clear about it,I have a instance to describe my question at detail.
        If there is a final product A, and the planning strategy for A is 20(MTO), the procurement type of A is F(external procurement) at the view mrp2 in the material master datas.
    step1: I creat a sales order.
    step2: run MRP for A.
    step3: transfer the purchase requistion into a purchase order,and the field of acc.***.cat. in the purchase order will be filled out M automatically, because the acc.***.cat. in the planning strategy 20(MTO) is set with E.
        Well, the purchase order is created, what is the relationship between the sales order and the purchase order? What will be happened about costing between the SO and the PO?
        If I delete the E, I make the PO become a standard PO, what is difference between standard PO and the PO including E?
    Best Regards
    Bob

  • Account Assignment Category in Rework Order for non valuated material

    Friends,
    We created non valuated material for rework. I want to accumulate the rework cost. When i am trying in CO02 = Header = Settlement Rule where the category is MAT but I want it to be ORD.
    How that category is changed to ORD, so that I can able to accumulate cost with respect to order?

    Hi,
    Whether you are creating the rework order with material? Actually rework order is supposed to be created without material with transaction CO07. Here in this case you have to define the account assignment category ORD in settlement rule.
    In some cases to meet the requirement we can create the rework order with material also through transaction CO01/CO08, but in this case the account assignment category will be MAT by default. Therefore you cannot change it to ORD.
    Hence you need to create rework order to have account assignment category ORD w/o material only.
    Regards,
    Sandeep

  • Default the GR based IV check in PO based on account assignment category

    Hi Experts,
    We have the below business requirement based on GR based IV check in the PO. We knows that this can be automatically defaulted by using the two master records.
    1.Vendor master,
    2.Purchase info record.
    But our cilents needs this field to be automated based on the account assignment category.  Because lot of vendors are created without the activiation of this check box also they do not want to go by mass upload transaction to change the master records.
    They want only based on the account assignement category. For example if a PO is created using the account assignement K then this GR based IV is selected automatically.
    Kindly adivce any configuration setting is available to fullfill this requiremennt.

    Hi,
    unfortunately the GR based IV can not be set in OME9 (in customizing).
    In ME21N, if it is normal PO, GR Based IV indicator is not set. But if 
    item category = D, GR Based IV indicator is automatically set by       
    system.                                                                
    Best regards
    Erika

  • Problem in account assignment category

    Dear  all
    PM expert
    We use BADI to remove the account assignment category when we create Purchase Order Through
    Maintenance PR ( A/C  Assig. F  But we donu2019t Need  ) but when we done MIGO
    There are shown error .
    What can I do  if there are some other  procedure to remove the account assignment category
    Thanks in advanced
    Sumit jain

    HI,
    Check
    1.material type of material whether it is non valuated or non stock material in this case you have to assign account assignment category.
    2.material master record - account view is maintain or not.
    3.Check item category 
    reward if Helpful.
    Regards,
    chetan.

  • Account assignment category for Packaging mterial

    When I create purchase order for a packaging materials , it is asking for a account assignment category. We dont want to create accounting documents as well as we dont want to use account assignment category. Is there any way to suppress the error message - account assignment mantory for material type?

    Hi,
    For Packing materials which material type you used. I think you have created in Non stock materials/Non Valuated Materials material type.
    If you use NLAG material type then you need to enter the A/c assignment category.
    So always for Packing Materials you should use VERP Material type. As Packing materials are Inventory items so you don't need to enter the Account assignment category in PO.
    Hope you got it.
    rgds
    Chidanand

  • Purchase order and Account assignement category- Change

    hi.,
    We are trying to receive the Purchase order of High value components into INVENTORY.
    However, most of these Purchase Orders were created with account assignments.
    Because of that, if we receives these PO’s, they will be consumed against the object identified in the account assignment.
    Additionally, some of these have been invoiced already and would need to be backed out from the finance side.
    Question: How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Invenotory.
    Also, what are the other options ( FI will not open Previous period) so that the PO's which have been invoiced  can be reversed against that AC assignment.
    Thanks All

    hi Rajesh.,
    As mentioned earlier, these  Purchase orders are STO's which have been already created and we are waiting to do the GR for the same. Items in the STO PO are of  High value which we need to bring into  INVENTORY.
    But, because these STO PO's were created with account assignments, if we do GR now, they will be consumed against the object identified in the account assignment.
    Some of these STO PO's have been invoiced already and  FI has indicated that they could cancel the invoices for those STO PO's in previous posting period.
    Question again : How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Inventory and not to a cost Center (202)
    Step (1) Can we cancel the Invoiced items> reverse the GR for invoiced Items>reverse STO for PO ?
    Step (2) Can we reverse the STO for PO for which GR has not been done? then
    Step (3) Change the PO through ME22N, remove the Account assignment category?
    Or how do we correct this situation for
          (1) PO's already invoiced.
          (2) PO for which GR has not been made. How can we receive them into Stock and not Cost center.
    Anticipating a reply
    Thanks
    Sri

  • Account assignement category for purchase requisition - error message

    Hi All!
    I created a new Item category in service order (IW31) "O" with the account assignment category "O". If I don't set the Consumption posting indicator to V for this category, when I set the account assignment category "O" to the purchase requisition in <i>Plant Maintenance and Customer Service-Maintenance and Service Processing-Maintenance and Service Orders-General Data-Define Account Assignment Category/Document Type for Purchase Requisitions</i>, I receive the message:
    <b>"Acct. assign. cat. "O" for purchase req. does not exist.
    Message no. CS 075"</b>
    The client request is not to charge immediately for the goods receipt with the relevant costs the service order. The client wants to create the goods receipt in a storage location for the plant and then confirm the components and charge the costs after the component confirmation (movement type 261) - similar to stock material.
    Any idea about what should I do?
    Thank you.

    Hi Everyone,
    The problem is solved now. The cause was that the test requisition that I was making was satisfying more than one rules and hence I end dated the remaining rules which solved the problem.
    Thanks!

  • Exact difference between Item category and Account assignment category

    Can anyone plz give the exact difference between account assignment category and Item category
    Thanks inadvance

    Hi,
    Account Assignment Category: Key indicating whether an item is to be assigned to an auxiliary account (such as a cost center). The account assignment category determines which account assignment data (e.g. cost center, account number, etc.) is required for the item.
    Item category: Identifier indicating the characteristics of an item. The item category determines whether the following are necessary or allowed with regard to an item:
    Material number, Additional account assignment, Inventory management in the R/3 System, Goods receipt, Invoice receipt.
    Prase

  • Account Assign Category in Req. Class

    Hi experts,
    Can anyone please let me know about the Account Assignment Category in Requirement Class(TC:OVZG)? What its control? My client bus process is 3rd party MTO what acct assign cat is suit to this process? let me explain an example......
    1. In req.class i have given M in acc.assign.cat. what is the impact with this category? While creating a PO i am giving Z account assign category. which one is correct? please do help
    Looking forward your valuable ideas
    regards
    anifi
    Edited by: Anifi on Sep 17, 2008 6:39 AM

    Hello
    To enable goods movements to take place through the sales order stock, you must select the requirement class that specifies that account assignment category that specifies that goods movements takes through sales order. If u want collect the costs and revenues to the sales order make the consumption  posting field E, if u don;t want collect the costs and revenues to the sales order then that field should be empty.
    Regards
    Madhav

  • About account assignment category

    Hi, I have a question about account assignment category.I hope someone give me the answer , and I would appreciate it.
        If there is a final product A, and the planning strategy for A is 20(MTO), the procurement type of A is F(external procurement) at the view mrp2 in the material master datas.
    step1: I creat a sales order.
    step2: run MRP for A.
    step3: transfer the purchase requistion into a purchase order,and the field of acc.***.cat. in the purchase order will be filled out M automatically, because the acc.***.cat. in the planning strategy 20(MTO) is set with E.
        Well, the purchase order is created, what is the relationship between the sales order and the purchase order? What will be happened about costing between the SO and the PO?
        If I delete the E, I make the PO become a standard PO, what is difference between standard PO and the PO including E?
    Best Regards
    Bob

    Hi,
    Definition: Account Assignment Category: - A key indicating whether an item is to be assigned to an auxiliary account (such as a cost center).
    The account assignment category determines which account assignment details are required for the item (for example, cost center or account number).
    Generally used Account Assignment Categories are Cost Center (K) in case of Miscellaneous Purchases, Assets (A) in Capital Goods Purchases, etc...
    You can configure Account Assignment Category in Transaction OME9 OR you can go with following path;
    SPRO > MM > Purchasing > Account Assignment > Maintain Account Assignment Categories
    Her you have to perform following Activities;
    1.  Check the attributes of the account assignment categories
    2.  Maintain the account assignment categories to suit your requirements

  • Account assignment category restriction

    hi guru's
    i want to restrict the Account assignment category at document type wise!
    for same service item category for different document type i want to have the control, from perticular date!
    can i have the same for transaction code ME51/52 and ME21/22
    already for Njoy trsanction we have controlled through BADI.
    please let us know is there any exit /badi available for me51,52,21,22.

    You can try to check below :
    For PR you can use Badi ME_REQ_POSTED
    For PO you can use exit ZXM06U43 in exit EXIT_SAPMM06E_012

  • Default G/L account for account assignment category 'E' in PO

    Dear All,
    I have a PR created by MRP where this PR is triggered from Sales Order. Therefore, PR has the account assignment category 'E'.
    When I create a PO with reference to this PR,  G/L account needs to be entered. Is there a way to make it default from T030 BSX key ?
    Best regards,

    Hi,
    Check the attributes of Account Assignment Category "E" in OME9;
    Consumption posting  E
    Special Stock        E
    Based on the this system reads the BSX key for the material valuation in OBYC (Table T030) and defaults the GL A/c.

  • How to make default account assignment category in planned order?

    Scneario Description:
    1. Sales order for a configurable parent item is created in ERP & order BOM is changed & transferred to APO. In APO MRP run takes place for that parent item, which creates a planned order with account assignment category "M" (M:Individual Customer w/o KD-CO.
    2. Now based on the dependant requirement generated for parent item, MRP takes place for one of the child item in ERP & purchase requisition gets created for child item.
    Question:
    1. Can anybody help me how i can make default account assignment as "F" (F:Order) in the planned order of parent item?
    2. PR created for child item also has default account assignment category as "M". we wish to change that to "F".
    Thanks & best regards
    Hemchandra & Sandeep Mandhana

    Hi V. Suresh,
    The account assignment category maintained in the requirement class for parent item is 'M'.
    No account assignment category maintained has been maintained in the requirement class Semi-finished component (this component is sent for subcontracting).
    The business process is as follows:
    1. Create Sales Order for Parent say ME_PARENT.
    2. Order BOM for ME_PARENT is created and subsequently cifed to APO.
    3. PP/DS heuristic is run for ME_PARENT.
    4. MRP for component ME_COMP is run in ERP.
    It can be seen that purchase requistion for ME_COMP has a/c assgn category as 'M'. It seems that the ME_COMP has inherited 'M' from ME_PARENT.
    We would like to have no a/c assgn category for ME_COMP.
    Any pointers?
    Regards,
    Sandeep

Maybe you are looking for