GR Printing For Single Line Item With Multiple Account Assignment.

Hi All,
There is PO for projects (Account Assignment -P - Network) in which in a single item consist of multiple account assignment.
Noe while entering the GR I select "Collective Slip" option but when the GR is posted system automatically select option "Individual slip" and seprate line item are printed for each account assignment.
The printing program is standard SAPM07DR. The SAP version is 4.7. Can anyone tell what is ther any setting in configuration or is it problem in program or smart form
Thanks & Regards,
Omkar

hi
please check your form and routine used to print.

Similar Messages

  • Undeleting a PO line item with multiple account assignment and PO history

    I  am getting error message
    PO history already exists (Multiple account assignment not possible)
        Message no. MEPO841
    When attempting to undelete a purchase order line item that has GR (nonvaluated) and Invoice postings.
    Sequence of events.
    PO line item was created with mutlitple account assignments ( 50/50 distribution) and GR nonval flags on.
    Invoice Posted (blocked for payment)
    GR done
    PO line item marked for deletion.
    Now getting MEPO841 when attempting to undelete.
    Tried to Reverse GR and cancel material docuement - unable to do so - message no selectable items in PO
      (even with check zero indicator )

    Hello Dan ,
    Error message MEPO 841 is only issued if you have Multiple account assignment function (MAA) activated. Multiple account assignment function is a new business function developed in Release 604.
    If you have MAA active, you are not allowed to change a single account assigned PO which has GR posted to a multiple accounts assigned PO. If this is tried , MEPO 841 will stop you from doing this change.
    If you want to have your old functionality in the lower release, you should switch off the business function LOG_MM_MAA_1 ( MM Multiple Account Assignment )  in Release 604.
    Please switch the business function LOG_MM_MAA_1 off in test environment  and test the problem again in a productive system.
    I hope this information has been helpful in solving your problem. Please let me know if you have any further questions.
    Thank you.
    Best Regards,
    Frank Farinella

  • PC WF - Agent Determination for Items with Multiple Account Assignment

    Hello Gurus!
    The quoted text below is from [SAP Help Documentation|http://help.sap.com/saphelp_srm70/helpdata/en/ad/d8fd25beb64bbe9d671f3199eb7edf/content.htm]. I haven't been able to find any further documentation on how to implement this feature. Is this something the system can do without any BAdI implementations? Has anybody implemented this? How can this be accomplished? We are on SRM 7.0.
    "You can distribute costs across accounts by percentage, by quantity, or by value. If the responsibility for approving items according to given accounting data is divided between several approvers, the system can create one work item for each approver. The item can only receive the status Approved after each approver has approved it. As soon as one approver rejects an item, the item receives the status Rejected."
    Regards,
    Ramki.

    Hi,
       SAP does not provide the standard Badi implementation to achieve your business requirement.. but you can refer enhancement implementation /SAPSRM/BD_WF_AGENTS_SC where you can find badi implementation /SAPSRM/BD_WF_SC_RR_PGRP is similar..
    Saravanan

  • PO with multiple account assignment

    Hi Experts,
    While creating PO for multiple account assignment system is automatically picking 'GR Non-Valuated' check box.After doing a GR no accouning document generated.
    How is the goods receipt valuated for a purchase order with multiple account assignment?
    Please explain.
    Thanks,
    Sanjana

    Hi,
    It is possible to create PO with multiple account assignment,but you will not get accounting document at the time of GR.it will happen at the time of MIRO,as i have allready explained.
    If you will create PO with multiple account assignment for Services,System will generate Accounting document at the time of GR.
    I hope it will clerify.
    Regards,
    Manish

  • Approve requisition with multiple account assignment

    Hi,
    A requisition with 3 cost ctr. where cost is spread out with 50% to one account and 25% to the other two is send to be approved by the strategy covering the cost ctr. that get the 50% cost. This routing the approval seems logically - but can we control it someware on the IMG or ......
    BR
    Joergen

    Whether a single line item has multiple cost centers or each line item has differnt cost center?
    if each has different cost center then you can use item wise release and cost center is one of the characteristics.
    Remember if you use cost center as one characteristic then you have to follow the note 493900
    Cost Center values (CEBAN-KOSTL) and Vendor values (CEBAN-LIFNR) in the release strategy characteristics should be entered with leading zeros.
    This is true for the other structures as well (CEKKO and CESSR). See note 52225
    Note:52225
    Cause and prerequisites
    Numeric values used for the cost center characteristic in the purchase requisition release strategy with classification is not recognized. CEBAN-KOSTL is a CHAR field of length 10.
    Solution
    Enter leading zeros for the cost center value in the release strategy. eg. If the cost center value is 123456, while entering this value for the cost center in the release strategy, enter it as 0000123456

  • PO Error in Process with Multiple account assignment

    Hi ,
    I am working with Extended Classsic scenario.
    Problem is with PO with Multiple account assignement.
    There is only one user who is getting problem with one particular account assignement "CCC" - Cost Center RP.. . When PO gets created with this particular AAC , it goes into "Error in process" only for one user.
    In RZ20 it shows messsage as "Please enter quantity or percentage for account assignment" & "Distr. ind. and partial invoice ind. must be set f or multi acct. assgt.".
    On other hand , other users are able to order the PO with the same AAC without any error.
    What could be the reason behind this only for one user ?
    Regards,
    Sheetal

    Hi ,
    I have checked it intially and both are identical.
    Initialy the problem was, user had entered 128 times AA line items  ( added & deleted ) in the PO while in the SC it was having only 64.... Our system accepts line items till 99 , so i asked him to delete the items above 99 ..
    So after that POs error has gone and it went for approval..
    But after approval it again went into error in process
    Sheetal

  • Partial invoice with multiple account assignment

    I'm using PO with multiple account assignment with distribution by percentage and proportional distribution for partial invoice.
    When i post invoice verification for this kind of orders the amount and quantity field in PO item are closed for update and no automatic proportional distribution has been performed.
    The only possibility to update amount in case of partial invoice is to update amount of each account assignment manually (using account assignment button).
    Why the amount and quantity fields are closed for update?
    How i can post partial invoice for multiple account assignment order without manual distribution of changed amounts among different account assignments items?
    Thanks in advance.

    Thanks Charlie.
    I am aware of that. But do we have that "partial invoice" field where we can select teh distribution as proportionate or sequence.
    My POs item are having around 30 to 45 account assignments. In that case it is not possible to manual distribute the amount.
    Please advise.
    Thanks,

  • Asset PO with Multiple account assignment..!!!

    Hi all ,
    i am creating asset PO with multiple account assignment and having pricing condition 5.5% Octroi..
    While doing the MIRO , system should distrubuted octorie amount  to all the assets ( load to asset value )
    But system is not capture the octorie amount in MIRO...
    Any customization required for multiple account assignment in case of Asset PO ..??
    Please help.

    Hi,
    In MIRO, item detail screen, you check for a button which allows apportionment of the value.
    Regards
    Aloysius

  • GR Non-Valuated  with multiple account assignment

    Hi, gurus;
    some knows a user exit or badi that is used to undercheck the flag GR Non-valuated when PO with multiple account assignment is created (ME21N) ? It can have some consequence in later invoice verification?
    Thanks in advance
    R.Z.

    gr non valuated is done in case ur procuring the material for direct consumption so at the time of gr no posting to accounts occur but at the time of invoice recipet the system debits the g/l account and crdits the vendor account 
    this multiple account ***. is also necessary to mark with gr non valuated and gr check box so that u can change the account assignment at the time of invoice and that acc. assg. should also be changebale in backend .

  • Limti PO with Multiple account assignment Problem

    Hi,
    Can we create limit PO with Multiple account assignment.
    If yes, i have issue with commitment distribution for all the account assignment. when i post service entry sheet the value is posting for only first one cost centre/Order but not all.
    So in the purchase order for the remaining account assignment commitment remain left.
    Reagrds,
    JM

    Hi Summer,
    We have implemented SAP Note 1165524 for multiple account assignment as suggested, and it is working fine for New POs.
    But we have old Purchase order which still have wrong commitment, and GR and IR are already posted for this PO, we have to reduce the commitment to Zero.
    there is one solution for this is set  'No further Invoice expected' check box selected in this PO, but in our case PO  went into error in process after doing this.
    Please help me to reduce commitment to zero for this old PO
    Thanks in advance
    Vikas

  • BAPI_REQUISITION_CREATE with Multiple Account Assignment

    Hi, Does anyone have an example code of this function with multiple account assigment values
    Or suggestions to implement this FM
    I´m beginner in abap
    Thanks
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 12:47 PM

    Hi, I saw that function,does anyone have a z program using this bapi
    with  Multiple Account Assignment structure
    thanks

  • Asset Creation in PR and PO and MIGO as a single Line item with "N" qty

    Hi All,
    In Purchase requestion ME51N
    Now we are creating "n" number of assets ( All are same item but "s.no" will vary) with "n" number of line item.
    Instead of this I have to enhance to create only one line item( For same item) with "n" quantity.
    for the ASSET account Assignment we have to create Asset(Temp no) for the each item/quantity(if the same item).
    as well as if they are going to create a PO with ref to PR they have to see all the "n" number of asset no.
    In MIGO creation for each asset we have to assign S.No and Asset Tag.
    How enhance the functionality in PR,PO and MIGO as well as in Invoice.
    Is it any User Exit/BADI is available for PR/POand MIGO to show all the "n" number of assets for a single line item.
    Kindly help me to give details to proceed further.
    Thanks in advance.
    sharma

    Hi Sharma,
    What i understand from your question is, you want to create a single line item in PR and PO. But the qty would be > 1.
    Each single qty would have its own asset number in account asssignment tab of item details of PR & PO.
    This is what you are expecting...Right???????????????
    Then this is possible with certain limitations.
    While creating PR, enter only one item with more qty.
    In item details section, in account assignment tab, on top left corner, there will be a button called Multiple account assignments.
    Click on it, then it looks like a table, where you can enter more than one line. (each line will have its own asset no)
    And choose option Distribute on qty basis for field Distribution.
    So that you can enter 1 qty for each line. ( Ex: if you created one line item in the item level with 10 qty, you need to maintain 10 line here, each qith 1 qty and diff asset no).
    The only limitation to this is, the GRN would be treated as non valueted. So when you make GRN there wwould not be any accounting doc. ( means no use of GR/IR clearing account as like normal for POs)
    when you prepare MIRO, all the assets will be capitalised and vendor credited.
    But in case if you receive partial invoice, then you have choose manually in MIRO. which asset is ot be capitalised.
    After entering the PO number in MIRO, there will be one line will be appeared with full qty. in the same line, move till the end of line, there you will have one button called Account assignments.
    Choose and go there, here you can choose which individual asset line to be considired.
    This will resolve your issue.
    Thanks,
    Srinu
    SRBORIGI_MULTIPLE ACCOUNT ASSIGNMENTS

  • Non-valuated Goods Receipt for Purch.Order Item with multiple acct assgnt

    Dears,
    i used multiple account assignment functionality based on percentage for purchase order item and the system forced the goods receipt as "Non-valuated Goods receipt".
    In this way i don't have FI-CO documents at Goods receipt; i got them only at Invoice verification. So i totally lose analysis on account "Invoice to Receive".
    Please, give me some suggestion if you know something in matter.
    Thanks in advance,
    Regards
    Enrico

    It means that i didn't set non-valuated goods receipt.
    The system automatically set the flag if more than one account assignment are used for one purchase order item.
    If happens that just one account asignment is used for one purchase order item then the goods receipt is still valuated.
    i didn't try so far with quantity instead of percentage but, anyway, i need to use percentage.

  • GL balance/line item by multiple account grouping

    I have around 200 expense accounts, I want to define GL account group or set,
    for example, I want to define fourty such GL group
    in FAGLB03 or FBL3N, we can only retrieve balance or line item by one account grouping and save as variants.
    is there any report or ways we can list down multiple account group balance or line item in one go?
    if I run FAGLB03  account group by group and list down period 1(Jan), period 2(Feb), period 3.....GL line item summarization figures it will take more than two weeks,

    Hi Siva,
    If i understand your requirement correctly, I think you can select multiple account groups from 'GL account line item display (FBL3N)' dynamic selection screen as shown in below screen.
    Regards,
    Prasad

  • Down payment with multiple account assignment PO

    Dear Experts,
    While posting down payment request through transaction F -47 with
    reference to purchase order we are getting below given error.
    In that purchase order we have given
    multiple account assignment i.e. multiple cost centers (e.g. Cost center A  50% cost center B 10% Cost Center  C 40% i.e. distribution by %)
    but
    system is flagging message
    Item 00010 of purch. document 4500024875 contains no suitable account
    assignment
    Message no. ME717
    What will be the possible cause?
    regards,
    Abhijit

    Hi,
    In the request f-27 tr.code give the purchase order which item you want to give ie., for above said example 10 is a line item of 4500024875 - purchase order and beside you have to mention
    10(lineitem) 4500024875 (purchase order) 2009 (year)
    and system will take that request against the above purchase order.
    Regards,
    satish

Maybe you are looking for

  • Creating EJB 3.0 Session Bean under JDeveloper 10g.

    Hello im using JDeveloper 10 g all up 2 date. when i create EJB 2.x EJB everythink is ok .. there is a Wizzard(Designer) from which i can add methods variables and etc. all methods are become added to the session bean / remote interefeis etc. My Prob

  • HTML file Error while Processing in Application server AL11

    Hi Experts, I have SAP workload data in HTML file and IF i download it using GUI_DOWNLOAD, I am successfully able to access the file. But Further: 1) I am uploading the above mentioned downloaded file in binary mode. 2) Converting binary to xstring 3

  • Wrong GROUP_ACCOUNT_NUM values

    Hello everybody: I´d already defined the values for the group account number in the file_group_acct_codes_ora.csv and the values are getting right to the OBIEE Analytic Warehouse table W_GL_ACCOUNT_D. in the Cash flow dashboard located in Financials

  • What brush was used to create this artwork?

    I am not familiar with using brushes in illustrator. Just wondered where to start! Underdog

  • Photoshop CS4 'Arrange Documents' dialog

    Photoshop CS4: Problem: With several documents open by going to the 'Arrange Documents' flyout dialog they could be arranged in the manner required - however the dialog flyout on my setup is blank - I can still arrange the documents by clicking on th