Gradient with no opacity is not working correctly

I was wondering if anyone had any idea about this problem that I've been having. For some reason when I create a gradient that goes to zero opacity on either end it gets all scattered.
It was working fine and now I've reinstalled it in Windows Vista 64bit. I remember I had this problem the first time I installed it as well but then I turned the update on and it just went away before I really cared too much. Now I've got the update on and went and downloaded the 10.1 from the website and it's starting to bother me.
I went and got the latest drivers for my video card which is a Nvidia 8600 gt, but I'm leaning towards the card being the cause of the problem, but any ideas would be helpful.
Here is an image of how this gradient is supposed to look created using a black to white
http://theebom.com/picturehost/gradient-fine.jpg
Here is how it actually looks using a black to white (0% opacity on the white)
http://theebom.com/picturehost/gradient-broken.jpg
I had someone ask me if the dissolve blend mode was on and it wasn't, both of these gradients were applied to the background layer.
And to all you Vista nay sayers I use Vista 64 at work and I've never seen anything like this there before.
Thanks in advance for any advice

The only thing I changed since I've installed it is the scratch disk settings and those have nothing to do with it. I don't see a gradients options per say, but I have been through all the preferences and I turned on 3d hardware acceleration and flipped all the other switches and moved the sliders, I didn't notice any change. If there's another options menu I should be checking let me know (I have CS3 and I think they combined the options and preferences into one menu) And the blend mode in the layer palette is set to normal or to nothing (test is mostly on the background).
And the only problem I'm experiencing with the program is this issue. Everything else works exactly as expected and I haven't noticed long think times or anything. As far as I can tell it is specifically a gradient with a loss of opacity.

Similar Messages

  • Synching with Videos App does not work correctly

    Got a couple of problems. I'm trying to get some mp4 movies onto the Videos App's library. There is a similar problem with synching the iTunes University content.
    I added the mp4 movies to my iTunes library, synched them eith my iPad. They show up in the Films section of the iPad directories, but I can't get to them on the iPad itself.
    iTunes also shows that 65 files have been copied to the iTunes University section on the iPad, but only 1 file is available on the iPad itself.
    PLEASE has anyone got an idea what's going on, what I'm doing wrong?
    Oh, btw, I can copy the mp4 files over by sharing with wth iFiles App and then watch them on there so I believe they must be compatible....

    Try this:
    • Turn the iPad off and on again (hold the sleep/wake button for about 3 seconds until a red slider appears with the label "slide to power off")
    • If it din't help, try a hard reset - hold the sleep/wake button and the home button simultaneously for about 6 seconds, until the iPad tunes off. Then turn it on again.
    • Go to "Settings - General - Reset" and choose "Reset All Settings"
    • If it does not help, restore the firmware with iTunes - IMPORTANT, don't let iTunes use one of your backups… set it up as a new device.
    Please don't forget to mark the topic as "Answered", that helps others when looking for an answer.
    I'm happy that just a few of the iPad owners are having problems and not all of the 4'689'255
    enjoy your magic machine

  • Business Contact Manager 2013 Issue with drop down menus not working correctly and BCM disappearing.

    We upgraded from BCM 2007 to BCM 2013.  Now the BCM disappears from Outlook occasionally and the drop down menus are confused. for instance when accessing the drop down for phone numbers, the user selects company - but the field for TTY/TDD comes up.
    Shows fields that don't exist etc.
    The client is using Office 2013 Pro Premium from Office 365 Small Business Premium subscription and BCM downloaded from Microsoft website.
    Please let me know what the support avenues are for this product.
    Chris Smith

    Hi,
    This issue may be caused since the BCM was not installed properly.
    Please go to Control Panel -> Programs and Features, find Business Contact Manager for Microsoft Outlook and Uninstall it.
    Then go to
    http://www.microsoft.com/en-us/download/details.aspx?id=36513, download the right version of BCM(32bit or 64bit) and install it.
    If issue persists, you may provide the screenshots of the issue, post them to SkyDrive and share it via a link:https://skydrive.live.com/, then we will have a better understanding on the issue.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Forecast splitting not working correctly

    Hello
    I have a problem with the forecast splitting not working correctly.  We are using 2M->W     2 MONTH IN WEEKS     0  GLEI and most of the time this appears to work fine but there are occasions where the forecast is split for May, did not split Jun but split July.
    E.g. 
    06.05.2008     IndReq     VSF               9,424-
    12.05.2008     IndReq     VSF               20,845-
    19.05.2008     IndReq     VSF               30,925-
    27.05.2008     IndReq     VSF               24,740-
    02.06.2008     IndReq     VSF               134,257-
    01.07.2008     IndReq     VSF               25,771-
    07.07.2008     IndReq     VSF               32,213-
    14.07.2008     IndReq     VSF               32,214-
    21.07.2008     IndReq     VSF               32,213-
    28.07.2008     IndReq     VSF               25,770-     
    Do any of you Guru's have any idea why this would happen?
    Many thanks
    Sue

    I checked it in MD67
    it is working fine.
    In MD61 - my demand is 800 each for June and July. it hjas splited as below
    system is dividing the total qty on daily basis and then multiplying by no days in that week covered by requirement
    W 22.2008             26.667
    W 23.2008            186.667
    W 24.2008            186.666
    W 25.2008            186.667
    W 26.2008            186.667
    W 27.2008             26.666
    W 27.2008            154.839
    W 28.2008            180.645
    W 29.2008            180.646
    W 30.2008            180.645
    W 31.2008            103.225

  • Is prompted filter not working correctly with calculated items

    Hello,
    I am working on OBIEE 11.1.1.3 and having problem problem linking 2 analisys with action link
    The test case is:
    I have 2 attribute columns on a dimension
    1. Conto 1 Code
    2. Conto 1 Dsc (in RPD i set up the property Descritor ID of -> Conto 1 Code)
    3. Conto 2 Code
    4. Conto 2 Dsc (in RPD i set up the property Descritor ID of -> Conto 2 Code)
    5. Conto Detail
    and 1 measure on the fact table
    1. Revenue (defined on RPD as simple sum)
    On presentation layer i have the analisys:
    1.
    The First one using as Criteria: Conto 1 Dsc | Conto 2 Dsc | Revenue
    The layout is a table with sub-total on Conto 1 Dsc
    On Revenue i created an action link to the second analisys containing
    2.
    Criteria: Conto 1 Dsc | Conto 2 Dsc | Conto Detail | Revenue
    Filters: Conto 1 Code (is prompted) | Conto 2 Code (is prompted)
    This pair of analisys are working fine.
    Then i created a second pair of analisys as:
    1.
    Criteria: Conto 2 Dsc | Revenue
    Using Calculated group \ Items i created a numerous set of sub-totals
    On Revenue i created an action link to the second analisys containing
    2.
    Criteria: Conto 2 Dsc | Conto Detail | Revenue
    Filters: Conto 2 Code (is prompted)
    This pair of analisys are not working correctly. When i drill from first analisys to second one the Conto 2 Code filter is not used.
    Replacing in the second analisys Conto 2 Code (is prompted) with Conto 2 Dsc (is prompted) a filter is being generated on the drill but it's using the Conto 2 Code value and the analisys ends with no results.
    Thanks,
    Jonni

    Try adding Conto 2 code to the first analysis and keep the filter on the second analysis as Conto 2 code is prompted.
    -Amith.

  • I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

    I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

    Hi there,
    It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    -Griff W.

  • Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

    Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything.  I have taken my car to my local dealer but they say the Radiosat is working ok?

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

  • I am having problems with my Canon S100 camera. The shutter is not working correctly.

    I hope this is the right place to post a complaint about my Canon S100 camera's shutter not working correctly.  My daughter purchased two of these cameras, one for me, and one for herself.  Both cameras are having the same problem.  I hope Canon can help us with this serious problem.  What good is a camera if it does not take pictures?

    Stephen (Canon),
    I find it quite surprising that you do not respond to 28 pages of comments regarding this issue on the other thread and yet you directly comment here.
    Seems to me that the problem arises after significant use as the contacts in the shutter switch corrode and do not get the contact that they once did.  With many users this occurs just outside the 1yr warranty. However, it is clear that this is a design fault as opposed to natural 'wear and tear' and therefore I would expect that a company with Canon's reputation for excellent service would offer free repairs.
    Can you please confirm if Canon are preparing a response on this issue?
    Regards,
    Neil Walker

  • I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music? Any ideas on how to correct this?

    I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music?
    Any ideas on how to correct this?
    Thanks-Vitaleyes

    I don't know what they call it, but my plantronics voyager pro, and my wifes plantronics voyager pro+ will not let you hear music through the headset.  My Blueant T1 does support it and plays the music through the deadset.

  • Opacity Effect Not Working As Expected

    Hi,
    I noticed that whenever I animate the opacity of a clip that has a gamma correction efftect applied to it, the opacity does not work. Has anyone else seen this?
    thx

    I believe that if you do not use the automatic ken burns effect you need to set the effect for each photo - pick one or two and with the KB slider to the left set the view for the beginning photos and then slide the slider to the right and set the end view - then it will transition between those two (I'm thinking that you can turn auto automatic and override it for just the first slide by making the start and end the same so the transition does not really do anything
    Try that first (it is easier )
    LN

  • If statement within a view is not working correctly ?

    Hi all,
    maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
    I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
    <%@page language="abap"%>
    <%@extension name="htmlb" prefix="htmlb"%>
    <% if not isframe is initial. %>
      <htmlb:content design="design2003">
         <htmlb:page title = "Top Level Navigation view">
    <% endif. %>
    hallo world
    <% if not isframe is initial. %>
         </htmlb:page>
      </htmlb:content>
    <% endif. %>
    thanks in advance and best regards
    Matthias Hlubek

    Matthias,
    The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
    <%@page language="abap"%>
    <%@extension name="htmlb" prefix="htmlb"%>
    <% if isframe is <b>NOT</b> initial. %>
    <htmlb:content design="design2003">
      <htmlb:page title = "Top Level Navigation view">
        hallo world
      </htmlb:page>
    </htmlb:content>
    <% else. %>
      hallo world
    <% endif. %>
    So why does your example not work? Let us start with a simple tag:
      <htmlb:page title = "Top Level Navigation view">
      </htmlb:page>
    Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
      DATA: tag TYPE REF TO cl_htmlb_page.
      CREATE OBJECT tag.
      tag->title = 'Top Level Navigation view'.
      IF tag->DO_AT_BEGINNING( ) = CONTINUE.
      ENDIF.
      tag->DO_AT_END( ).
    You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
    <% if isframe is NOT initial. %>
      <htmlb:page title = "Top Level Navigation view">
    <% endif. %>
    <% if isframe is NOT initial. %>
      </htmlb:page>
    <% endif. %>
    And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
    if isframe is NOT initial.
      DATA: tag TYPE REF TO cl_htmlb_page.
      CREATE OBJECT tag.
      tag->title = 'Top Level Navigation view'.
      IF tag->DO_AT_BEGINNING( ) = CONTINUE.
    endif.
    if isframe is NOT initial.
      ENDIF.
      tag->DO_AT_END( ).
    endif.
    You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
    The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
    brian

  • ** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

    Hi Friends,
    We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY. 
    We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
    lw_fieldcat-lzero = space.
    lw_fieldcat-no_zero = 'X'.
    After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
    1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
    Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
    Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
    Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
    2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
    We are using SAP ECC 6.0.
    Friends, can you clarify the about doubts. It is surprising for me.
    Kind regards,
    Jegathees P.
    Our customer is asked to remove the leading zeros for the numeric field

    Hi Clemens Li
    I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
    Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
    Hi Abhii
    I have given below the fieldcat coding.
    Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
        wls_fieldcat-col_pos   = wpv_pos.
        wls_fieldcat-fieldname = wpv_champ.
        wls_fieldcat-tabname   = wlc_tabname.
      wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
        wls_fieldcat-seltext_l = wpv_libelle.
        wls_fieldcat-ddictxt   = 'L'.
        wls_fieldcat-no_out    = wv_no_out.
        APPEND wls_fieldcat TO gt_fieldcat.
    Kind regards,
    Jegathees P.

  • Key Figure calculation in Abap is not working correctly - Overlooping

    Hi,
    I wrote a logic to calculate the ratio of key figure but it is not working correctly
    For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
    So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
    Sample
    A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
    PRODUCT1 0.3 = 1000 * 0.3 = 300
    PRODUCT2 0.2 = 1000 * 0.2 = 200
    PRODUCT3 0.7 = 1000 * 0.7 = 700
    The total amount of this new products is 1000.
    Now my logic is working this way.
    PRODUCT1 0.3 = 1000 * 0.3 = 300
    PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
    PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
    Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
    Logic used
    DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
    DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
    DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
    DATA: amount LIKE data_package-netamount.
    DATA: zidx LIKE sy-tabix.
    REFRESH t_data.
    LOOP AT data_package.
      zidx = sy-tabix.
      MOVE-CORRESPONDING data_package TO t_data.
      REFRESH t_newdso.
      SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
      data_package-prod.
      SORT t_newdso BY prod.
    *LOOP AT T_NEWDSO.
      READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
      IF sy-subrc EQ 0.
        LOOP AT t_newdso.
          t_data-prod = t_newdso-/bic/znew_mp.
          t_data-material = t_newdso-material.
    *T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
          APPEND t_data.
        ENDLOOP.
      ELSE.
        REFRESH t_olddso.
        SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
        data_package-prod.
        SORT t_olddso BY prod.
        READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
        t_data-prod = t_olddso-prod.
        t_data-material = t_olddso-material.
        APPEND t_data.
      ENDIF.
      MODIFY data_package INDEX zidx.
    ENDLOOP.
    REFRESH data_package.
    data_package[] = t_data[].
    thanks
    Edited by: Matt on Sep 27, 2010 2:25 PM - added  tags

    Hi,
    I am not really good at debugging Abap code since I am a newbie. however  I have tried to add CLEAR T_DATA before the first loop.
    REFRESH T_DATA.
    LOOP AT DATA_PACKAGE.
    ZIDX = SY-TABIX.
    MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
    and before the second loop and select statement and at the end of the loop.
    REFRESH T_NEWDSO.
    SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
    DATA_PACKAGE-PROD.
    SORT T_NEWDSO BY PROD.
    READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
    IF sy-subrc EQ 0.
    LOOP AT T_NEWDSO.
    but then not all data are being fetched.
    thanks
    Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

  • Email pushing not working correctly for office email - 3 seperate devices/carriers

    We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
    I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
    I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
    Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
    User 4 is on the older nextel blackberry push to talk, and is not on outlook. 
    We do not have an exchange server. Our emails were all set up through our devices.
    Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
    Thank you in advance for any suggestions.
    Caitlin Talbot 

    Potential solution for windows for a side-by-side install. This works for me.
    To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
    The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
    I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
    + Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
    C:\Program Files\Mozilla Firefox\firefox.exe
    C:\Program Files\Mozilla Firefox 4\firefox.exe
    + Open profile manager. Start > Run : firefox.exe -ProfileManager
    + In profile manager create Two Profiles.
    firefox3.6
    firefox4
    + In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
    + Create two windows shortcuts.
    * General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
    * General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
    That's it. Links from external programs should now open in your default browser.
    Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

Maybe you are looking for