Grainy output when converting cr2 to JPEG in Photoshop CS5

Output JPEG becomes grainy whenever I am converting cr2 file to JPEG. Please help me with solution.

If the box beside Run Action is not checked, then you don't have any actions running when the Image Processor runs
and you probably don't want the Run Action box checked unless you want to do some adjustments to all the processed images
The name of the action can be any one that is loaded in the actions panel in cs5 and not always Image Effects.
Sometimes one has that checked and forgets about it and wonders why processed images are turning out strange.
Here's more about the Image Processor:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7427a.h tml
actions:
http://help.adobe.com/en_US/photoshop/cs/using/WSFC3351AF-238A-424f-99BC-ABF419177233.html

Similar Messages

  • Grainy results when converting CR2 to JPEG

    I'm processing raw images (.cr2) that have been taken under low light conditions.  Originals in raw don't exhibit as much grain as the conversions to jpg.
    Is there an way to minimise the problem?

    Barbara B. wrote:
    Sorry, ACR = Adobe Camera Raw. How are you converting these files, then?
    Just size the image down for the forum, or include screenshots of sample areas instead.
    Oh right !
    I'm opening the raw image with control/alt/o then adjusting for best picture before opening in PSE9 & saving as JPG format.  Saving as maximum quality "12".
    Actually - and I hope I haven't sent you all on a wild goose chase - the noise problem was introduced when I uploaded my 9MB photo to FaceBook and was subsequently reduced in size by them. It rather sounds like it's FaceBook's conversion that's let me down!
    Here's the problem - before uploading to FaceBook, and after... (and, yes, I know the original isn't perfect due to low light!)..
       Before uploading to FaceBook.
       After uploading to FaceBook.

  • When converting RAW to Jpegs in Batch converstion, I'm getting 2 copies of everyone.  Why??

    When converting RAW to Jpegs in Batch converstion, I'm getting 2 copies of everything.  Why??

    Oops, so you did. I must have been on auto-pilot
    I don't have any of those tracks in my library so I can't tell you that any of them work for me. If Genius works overall then it's probably a matter of sampling a critical mass of playlists that already contain those songs, for it then to be able to suggest suitable "mixes". I've not tried to get to grips with the mechanism behind Genius but I'd guess it works something along these lines. Your library gets inspected and some kind of summary gets uploaded to a server which integrates data from lots of users, and then gives you some back. Perhaps the process just does take time.
    tt2

  • Grainy Image when converting from PAL to NTSC...

    Hi,
    I'm using Compressor 2.0.1 to convert a PAL movie to NTSC. I find that the output is extremely Grainy, the blacs are Muddy and the Highlights are colored.
    Any suggestions?
    Thanks and Regards,
    Rajnesh

    There are many options when converting from PAL to NTSC with Compressor's Frame Controls panel. Have you tried other settings? Note, however, that the highest quality settings are pretty slow so be prepared for a fairly long wait even on your Power Mac G5.
    Otherwise, you might want to try the freeware utility JES Deinterlacer (available on VersionTracker.com). JES Deinterlacer is pretty fast at PAL <-> NTSC conversion and the results are better than you will get with the basic settings in Compressor 2.

  • Why does spot EPS not output when converted to CMYK or grayscale?

    Apologies if this is a known issue but I can't find it anywhere... I'm using AI CS3 (13.0.2) on an Intel iMac/Os 10.5.4 and I can't figure out why a white logo made from text outlines outputs fine to PDF if I use a spot color but if I change it to grayscale or CMYK, part of the logo doesn't output at all.
    The part which self-destructs is a supplied roundel of Caflisch text which has been converted to outlines (unfortunately I don't have the font on my system to do any deep testing). Another part of the supplied logo is a line drawing which outputs fine in any color mode.
    So I'm really looking for something to explain why the text part of this roundel outputs fine as a spot color but disappears from view when converted to CMYK or grayscale. I have been placing the file in a Quark 7.1 document and then exporting to PDF but I see the same problem when using the Flattener Preview.
    Thanks for any help.
    Simon

    Sorry for talking to myself like this -- been doing it for years...
    Finally found out what was wrong: the submitting designer had set the white coloured text objects to overprint. When I set them to knock out all was well.
    Kudos to Acrobat Pro Preflight for pinpointing the problem.
    Simon

  • "faded" output when converting a FRAPS recording to H.264

    I recorded a video with FRAPS using normal mode (not RGB capture) and now I'm having the issue where video looks "faded" or "washed out" after I convert it to H.264. I've read in other forums that this is a colorspace issue. In Squeeze Desktop I was able to fix the issue by adding a color correction filter and then checking the box that said "Flag as 16 to 235 color range." Is there any way to do something similar in Adobe Media Encoder? or any way to flag the video without using Squeeze Desktop so that it can be properly converted in Adobe Media Encoder?

    I tried using "High" but the results were the same. I made a recording of the recording with FRAPS to be able to send you a small file and in the process of doing so I discovered something interesting. It seems that when I record with FRAPS, the recorded video looks a little darker than the source. Then I realized that if I select the option in FRAPS to "Force lossless RGB capture" the recorded video looks identical to the source and also, it doesn't get "faded" when converted in Adobe Media Encoder.
    Here are the links to the two recordings of the recording that I made:
    Without RGB capture: MEGA
    Using RGB capture: MEGA

  • Faint grey border when printing on roll paper in Photoshop CS5

    When I print in Photoshop CS5 on roll paper, there is a faint grey border that prints all around my image.  I haven't created a grey border in my files.  Does anyone know what setting is creating this or what's going on?  And how i can stop it?
    Thanks!

    Also, just did this test:
    I used all of my old settings:
    Roll Paper selected
    Ultra Prem. Photo paper luster
    Super 2880 dpi
    no high speed
    And then I used the old paper profile for ilford gallerie smooth pearl. (I used this even though I'm currently printing on Ilford Prestige paper.)
    And it came out with NO faint grey Border!
    Then I tried it with all of those same settings, except I used the older profile for Ilford Gallerie Smooth Pearl for the ROLL paper (IGSPP11Roll_EPP4800_PSPPn.icc)
    Then I got the grey border.
    And finally just to make sure I wasn't crazy, I tried one more time:
    All settings as above except I chose the GPSPP12_EPSpro4800_PSPPn
    Which is the profile I downloaded to match the prestige paper.
    And GREY BORDER!
    So It seems like using the prestige profile was giving me the wash of grey. And also the roll paper version of the old gallerie smooth pearl also gave me a grey border.
    But what should I do now? I want to use the proper paper profile so my colors and tones come out right. I don't feel comfortable just using the wrong paper profile just to stop the border.
    On another note, I researched the Highlight Point shift (based on advice I heard from a friend) and that really sounded like what was causing it. However, I am not even seeing that on my printing options. I must be using a different driver or something. When I'm in photoshop, i just select "File - Print" and then go through that normal dialog. Is there some other way to print that gives me many more options?
    Thanks to you all for your help so far.

  • Grainy Output When Outputting h.264 into QuickTime File in Premiere Elements 12

    I have a video project that I need to output into a QuickTime file. I would like to use the h.254 codec in the file, because that would make it the most versatile for all of the places I will be using the video. However, when I use Share > Computer > QuickTime > Advanced... and use these settings:
    Codec: H.264
    Quality: 100%
    Frame Size: 1080x1920
    Frame Rate: 29.9 fps
    Field Order: None (Progressive)
    No bitrate limit
    Audio Codec: AAC
    Sample Rate: 48000 khz
    Bit depth: 16-bit
    I wind up with a terribly grainy and muted-color video. I have used these same settings in Share > Computer > AVCHD and end up with a great video. Is there anything I can do to output the nice quality into .mov?

    I have a video project that I need to output into a QuickTime file. I would like to use the h.254 codec in the file, because that would make it the most versatile for all of the places I will be using the video. However, when I use Share > Computer > QuickTime > Advanced... and use these settings:
    Codec: H.264
    Quality: 100%
    Frame Size: 1080x1920
    Frame Rate: 29.9 fps
    Field Order: None (Progressive)
    No bitrate limit
    Audio Codec: AAC
    Sample Rate: 48000 khz
    Bit depth: 16-bit
    I wind up with a terribly grainy and muted-color video. I have used these same settings in Share > Computer > AVCHD and end up with a great video. Is there anything I can do to output the nice quality into .mov?

  • Excel Output when Converting 6i Reports to 10g

    I am attempting to convert about 25 reports from Oracle Reports 6i to Oracle Reports 10g (10.1.0.4.2). The existing 6i system uses the Oracle Portal for job submission. The report server and our Oracle database are on Sun/Sparc/UNIX computers for both 6i and 10g. We have no space issues. In 10g, users will submit reports from Oracle Forms, running on Windows desktops.
    I am an experienced programmer in Windows reports and forms using MS-Access and Visual Basic. I am new to Oracle Reports and Forms.
    The existing 6i reports were set up so that a single report can be generated in either PDF or Excel format by just changing the DESFORMAT parameter from PDF to DELIMITED. We also have multiple optional parameters. In 10g, I cannot get the Excel to generate when there are groupings or summaries in the PDF version.
    In the 6i version, headers, footers, and summary lines were enabled or disabled in appropriate triggers through PL/SQL code:(IF :DESFORMAT = ‘DELIMITED’ THEN RETURN TRUE/FALSE;). In order to get the Excel spreadsheet we use the following URL: http://server1/reports/rwservlet?my_reports&report=labor_detail&destype=cache&desformat=delimited&mimetype=application/vnd.ms-excel&paramform=no&BEGIN_DATE=01%2F01%2F2009&END_DATE=01%2F31%2F2009&RESOURCE_TYPE=100
    When I converted the 6i report to 10g, I changed the following properties to support web layout:
    •     Report > Report Escapes
    •     Report > XML Settings
    •     Web Source: <%@ page contentType. . . and <rw:include. . .
    •     Paper Layout> Body> Web Settings > Table Attributes
    •     Changed triggers from :DESFORMAT = ‘DELIMITED’ to :DESFORMAT = ‘SPREADSHEET’; also tried deleting these triggers altogether
    In hopes of getting something to work, I rewrote a report for Excel only, but it will only accept one parameter. When multiple parameters are provided, it displays the correct data, but in paper layout.
    In the 10g version that is for Excel only, we use the following URL:
    http://server2/reports/rwservlet?my_reports&report=labor_detail&DESTYPE=CACHE&DESFORMAT=SPREADSHEET&WHERE_CLAUSE%20AND%20WORK_DATE>=’01/01/2009’%20AND%20WORK_DATE<=’01/31/2009’%20AND%20RESOURCE_TYPE=’100’
    I tried submitting the 10g report with the &MIMETYPE parameter, and it appears to open up the PDF file in Excel. I am using .rdf format, but I don’t see any difference when I use .jsp format.
    Is there a way I easily convert my existing reports and parameters so that they will produce Excel format?

    Thanks to everyone for their suggestions. I don't think I need to use the Forms Migration tool since the form has already been migrated from 6i to 10G. (Since I am now using an existing 10G form rather than trying to convert my 6i form.) I will check the FORMS_PATH. Is that in my registry file? I'm pretty sure the library has been compiled in 10G since it is attached to the other 10G forms I have and they work fine. But, just in case, how do I compile the library? And back to the FORMS_PATH: I still have the 6i version of Forms Builder on my PC. Will changing the path affect using 6i? Probably yes.

  • When i save to jpeg on photoshop the colors are dulled out and "depth" is lost (screen caps)

    i am so frustrated i have been working with images about 27in wide and ever since every time i save an image the colros are washed out i can attach any information needed evevn pass on the psd its self pelase help!
    Rite is photoshop file left is jpeg colors and deph gone
    bottom is psd file on photoshop top is jpeg

    so i set the color profile to sRGB IEC61966-2.1
    and assigned the color profile to the image to no avail
    here are my resolution setting and the profile i applied to the image.

  • I'm having trouble installing the update for camera raw CR2 file reading in photoshop CS5.

    I've downloaded the update, but cannot seem to get it attached to the program, they're not getting embedded somehow.  Any ideas?

    RichTea1 wrote:
    I've downloaded the update, but cannot seem to get it attached to the program, they're not getting embedded somehow.  Any ideas?
    You're not supposed to "embed" anything.  You need to install the Camera Raw 6.7.1 plug-in strictly according to the very specific instructions for your platform, Mac or Windows, given on the download page.
    Please note that later versions of Camera Raw (higher than 6.x) will not run on CS5.  Make sure your specific camera model is supported in 6.7.  "CR2" means nothing.  Every Canon camera model generates a different flavor of CR2 files.
    If your camera is one of the many newer models that was not supported in CS5, you will have to look for the free, stand-alone Adobe DNG Converter 8.1 or 8.2RC, download it, install it, and then run it in order to convert your raw Canon files to raw DNGs you can then open in ACR 6.7 hosted by CS5.

  • How do I resolve issues with missing layers when opening a Tiff file from Photoshop CS5.1?

    I am downloading Tiff images from a partners website. After extracting the file and opening from Photoshop CS5.1 it's only displaying one of the original image layers. For example and image with two guys shaking hands in an office is only opening the clipped two guys and not showing the backgroud. The vendor says the files open fine on their end which leads me to believe its a download or photoshop issue. Any recommendations?

    Thanks Curt... I don't think my explanation was clear. I'm downloading an image from an external webiste. The image downloads in a ZIP archive. After extracting from the Zip file, I go into photoshop and do file open. Only part of the image appears. It looks as if it's the top layer of a photoshop image but since I didn't build the image, I'm not certain it was built with multiple layers. Any ideas?

  • My Mac completely seizes when using the Gradient Tool in Photoshop CS5

    I've recently upgraded to CS5 and in tandem have replaced my 8Gb of RAM with 16Gb on an iMac 27" with a 2.8Ghz Intel Core i7.
    The problem that I've encountered with Photoshop seems to be connected with the COMBINED effect of these two upgrades. I just need to determine where the problem lies.
    Whilst attempting to apply a gradient (white to transparent) using Photoshop CS5 on a CMYK file my Mac completely seizes. And I mean completely! No 'force quit' option, nothing. Even the little light on my mouse goes out. However, suspecting that it may be a CS5 problem I tried the same procedure using CS4. Hey presto – no problem. Narrowing the area down still further I re-installed the original 8Gb chips and the problem went away. Back to the 16Gb and the problem reoccurs. I've also found that using the 'Auto Merge' facility also causes the same seizure.
    So, is it a RAM problem or a CS5 problem or a combination of the two? I've run Memtest the result of which indicated that the new RAM was behaving itself. The new memory is Kingston's finest and has had no adverse effects anywhere else on the system. If anyone can come up with a definitive answer I'd be grateful, especially if it means I can get my memory supplier to exchange my purchase gratis.

    If the whole machine freezes, then you are most likely looking at a hardware problem.
    Narrowing the area down still further I re-installed the original 8Gb chips and the problem went away.
    Yep, that's more evidence that the problem is in your hardware.
    Application software cannot cause a lockup like that.  Only hardware, low level drivers and the OS can cause a lockup like that.
    In your case, it seems to be the hardware (RAM chips or motherboard).
    Unfortunately, software RAM tests are useless.  But you've got a test that stresses the RAM system more than those tests: it's called Photoshop.
    We have seen several reports recently of RAM problems in newer iMacs. There appears to be a problem with the RAM specification, testing, or the motherboards.  Unfortunately, we don't yet have enough details to determine the root cause of the issues.  But most people have fixed the problem by swapping out the RAM.

  • Hidden file when converting from raw to jpeg. How to delete this?

    I just found out that when converting raw into jpeg in Photoshop there is a hidden file enclosed starting with ._ Computers don't see them but televisions do. I discovered this because I want to show a batch of my images on a television with a usb of a sd card. It shows my images and after each normal image I get a black image with a questionmark. It says 'cannot read this file' and it shows the name of the image but with a ._ in front of it. For instance garden.jpg and then -_garden.jpg. Computers don't read images starting with ._ but televisions seem to do so. I want to delete these ._ images because I cannot show a slide show of my images on a television. Anyone can help? It seems that this hidden file is incorporated into the jpeg file.
    Thanks in advance!

    Thanks. I have thought of this solution but these files are not showing when I set it this way. I had a specialist helping me to find this problem and he was very surprised that these hidden files didn't show up in his special program for showing hidden information. Only when going deeper and deeper into this program these files showed on his computer. As they are incorporated into the original file (the jpeg version) you don't seem to be able to delete them. What do people do when they want to show (jpeg converted from raw)images on their tv?
    I have a Mac if that helps.

  • Convert CR2 to DNG/JPEG

    When converting *.CR2 (Canon D600) to DNG and Jpeg have vertical white areas on the picture.
    What is cause?
    I use Lightroom, Photoshop and Adobe DNG converter
    The CR2 is good in the Viewer on the PC to Win 8.1.
    When I use Contenta software converter to JPEG then is result good.
    Via Adobe products is not good.
    Operating system Win 8.1

    Hi,
    Which version of photoshop, lightroom and the dng converter are you using?
    Which operating system?
    Do you see the vertical white areas in both lightroom and photoshop?
    Could you post a scrrenshot?

Maybe you are looking for

  • Reg Modification of a field in internal table.

    Hi i have requirement like this. I have a header and an items in a report. In header, i need to display the no. of . items(count). In my report i am displaying the records before moving to internal table(Direct write). Also i want to download that re

  • Get HR ABAP fields

    Hi all, Can anyone sugess me from where i get the basic pay amount (It's not available in PA0008) and cost center text and job text(Position) in Hr Abap. Points will be sured for valuable answers. Thanks Sanket sethi

  • Redirect HTTPS traffic to HTTP in Tomcat

    Hi, We are running SAP BI Platform 4.0 SP2 Patch 7, which runs on top of Tomcat 6. We have succesfully configured our iPads to connect to our SAP BusinessObjects server using HTTPS in internet. We have an application proxy that handles HTTPS and send

  • MediaSource Organizer - system cr

    Allways when I try to open one special folder in which i have my downloaded files (soulseek), the media source player/organizer breaks down and it is not possible to start it again until I remove it in the windows taskmanager. When I import the files

  • Regarding Web Services, Need to Access Tibco Data

    Hi Experts, I am very new to webservices... My task is to get response from TIBCO system. I got a xml file from tibco, I created client proxy in se80, using that xml file. Now I am trying to create a logical port for that proxy usng soamanager, I am