Graphic Driver on Satellite Pro U200 (Vista Business 32bit CZECH)

I experience two problems with my gfx driver.
1) When recovering from Standby, the display goes to 1024x768 instead of going back to 1280x800
2) When playing Lineage 2, the game crashes to Desktop and I get the error message "Display driver igfx stopped responding and was recovered". After googling a little, i figured out a new display driver for my Intel 945GM Express would resolve the problem. So I downloaded the proper driver from intel.com but I can't install it. I'm getting an error message saying "Installed driver is not verified for this computer. Ask the computer manufacturer for the appropriate driver." So I went to the toshiba website and I've downloaded the appropriate driver from there (well, the one on toshiba.com is not the latest, intel.com has a newer one). But when I tried to install it, I got the message that my computer does not meet the minimum requirements for the installation! What does this mean?! I've read the readme file and my laptop definitely meets the requirements, besides the driver I've downloaded has to be working for the Satellite Pro U200, because I've entered all the needed info for downloading the driver.
So can someone please solve my problem? And if not, is there a toshiba support hotline or something where i can call?

1st: Download the latest driver from the iNTEL-Page.
2nd: !UNINSTALL! the old one, under Add/remove Programs.
3rd: Reboot.
4th: Install the new driver.
5th: Reboot.
6th: Pray ;)
Good Luck. The error comes only when you try to install a new driver over another old one (which is from Toshiba). But Toshiba is never up-to-date when it comes to drivers, so better look for wireless, display and chipset always on the intel page!

Similar Messages

  • Satellite Pro U200 - Which image viewer is preinstalled on Vista?

    hi
    Which Image Viewer will be preinstalled on Vista Business from Satellite Pro U200 PLUA1E-02802QS4?

    Hi
    Im not Satellite Pro U200 owner but I assume the normal Windows image viewer is installed.
    But I dont understand the reason of your question. You can install and uninstall what you want so doesnt be worry about this! ;)

  • Get error message when trying a upgrade to Vista on Satellite Pro U200

    Hi,
    When I upgraded my Satellite Pro U200 to Vista (Using original CDs from Toshiba), I could not install Config Free program. When I want to install it, I receive the message "Installation image is not corrcet" Any ideas to solve this problem??
    Thank you

    Hi,
    maybe you should download the configfree again for your machine from here:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Just download it and try to install it. I cannot imagine that it wont work, Ive upgraded my A100 some time ago and everything works great.
    Btw. I downloaded all the stuff from the link above.
    Please give some feedback
    Greetings

  • Error message "failed to load Tosrfcom" on Satellite Pro U200

    hi
    I have Toshiba Satellite PRO U200 notebook with pre-installed VISTA Business
    after restart, even for the first time, have the following error in Event Log:
    Log Name: System
    Source: Service Control Manager
    Date: 07.07.2007 01:29:15
    Event ID: 7026
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: toshiba
    Description:
    The following boot-start or system-start driver(s) failed to load:
    Tosrfcom
    under:
    http://www.eventid.net/
    cannot find any solution !
    knows someone howto solve this problem ?

    Hi
    After a long investigation I found out that the Tosrfcom service is a part of the Toshiba Bluetooth. It must be a Bluetooth RFCOMM driver.
    The driver was installed in the registry under this entry:
    HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Services\ Tosrfcom
    I dont see many solution ways
    Try to remove the BT stack and download the newest one from the Toshiba Bluetooth center.

  • Re: Satellite Pro U200 - Can't install HDD protection Utility?

    hi
    Knows somwonw why I cannot install:
    18/08/08
    HDD Protection Utility
    Toshiba Windows Vista 32 Bit 2.0.0.7 World Wide
    on my Satellite Pro U200 PLUA1E-02802QS4 with Vista Business 32-bit?

    All Toshiba stuff available on download page is the same as in recovery image.
    All tools are tested and I don't see any reason why you should not be able to install this utility.
    Is some error message shown?

  • Satellite Pro U200 shuts down after 5 mins then starts after a while

    Satellite Pro U200 shuts down after 5 mins then starts after a while. When it shuts down the
    blue screen says - stop: (0x0000008e,0xaa846f58,0xa9f29808,0x00000000)
    sysaudio.sys - adress aa846f58 base at aa843000, datestamp 41107f1a

    Hi
    Believe me; its not easy to say exactly why the BSOD appears.
    Generally it happens because of the serious software malfunction or hardware fault.
    Did you use the OS from the Toshiba image?
    There message says something about sysaudio.sys.
    This file is a system audio WDM filter process and its a part of Windows OS. It controls the hardware like printer or graphic card on a lower level.
    Note: The virus uses such files as a camouflage. You should use always a anti virus application.
    Furthermore you have suggested that the notebook shuts down after 5 min.
    Well, this sounds like a overheating issue. How did you use the notebook? You should know that the free space around the notebook is very important because of the air circulation. The ventilators should be also free.
    I you use the notebook in the right position and this will happen again so I would recommend asking the Toshiba service partner for the help. They should check the notebook.

  • I need latest Microsoft Office CD - Satellite Pro U200-125

    I just bought Satellite Pro U200-125 without CD of latest Microsoft Office set. Does any one have that CD?
    Thanks
    Musallam

    You think somebody gives you an office-cd? Maybe you want a working serial as well? Come on guy, this is not a warez-place. Go to the shop and buy it.

  • Satellite Pro U200 - Docking Station

    Can you purchase a docking station for the Satellite Pro U200?
    If so, please can you pass on a link? or the Model numbers etc.
    Thank you for your help in advance.
    Adam

    Hi Adam
    I have answered your first question about Portg docking station.
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17291
    There you will find the link to the Options and Accessories site.
    On this Toshiba site you will be able to find the compatible and supported devices.
    If your notebook supports a slot at the bottom for a connection to the port replicator so you can use the docking station or port replicator as a additional device.

  • Satellite Pro U200 and APPCRASH issue (Disc Creator)

    I have problem in my laptop Satellite Pro U200 when I need to use Disc Creator (audio CD)
    Please help my to solve this problem :(
    *Problem details:*
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: ToDisc.exe
    Application Version: 2.0.0.8
    Application Timestamp: 46440bf9
    Fault Module Name: mpeg2dmx.ax
    Fault Module Version: 2.0.84.30429
    Fault Module Timestamp: 3eae72af
    Exception Code: c0000005
    Exception Offset: 0000dff3
    OS Version: 6.0.6000.2.0.0.256.6
    Locale ID: 1033
    Additional Information 1: d3a3
    Additional Information 2: fb01a2256ad7e2752c717e2443fc138c
    Additional Information 3: d475
    Additional Information 4: 02e2de344359c5cb9296e5c52491ddf3
    Read our privacy statement:
    http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

    Hi
    It seems this is a common error message if an application doesnt run as it should.
    According to this short error, the applications or process called ToDisc.exe has crashed. This file belongs to the Toshiba Disc Creator software.
    In my opinion its really not easy to say why it happens but my first idea is that your have used a not compatible or not fully supported CD or DVD to burn the Toshiba image.
    The image is really a big file and therefore you should use a DVD medium. Please check the user manual to get more details!!!
    Ive got additional advice; try to use different DVD from different manufacturers because sometimes not all mediums are supported.
    Bye

  • Satellite Pro U200 - Bad Checksum (ROM (Data Block) ) error

    Hello when i start my Toahiba Satellite Pro U200
    I have a Error
    Bad Checksum (ROM (Data Block) )
    PRESS ANY KEY TO CONINUE.
    Pleas Help

    The most common cause for "Bad Checksum" errors is the CMOS battery malfunction on the motherboard.
    The battery could be empty or could simply be dead. But its really not easy to say whats wrong exactly!
    Therefore I would recommend firstly to access the BIOS and to set it to default settings. Dont forget to save the changes.
    Furthermore you should connect the AC adaptor and should let it connected for about 24hours to recharge the CMOS battery.
    Maybe it helps to get rid of this error message.
    If it doesnt help, then you should contact a notebook technician!

  • Satellite Pro U200-10I - How to disable check system on start up?

    :x Hi,
    I have Toshiba Satellite Pro U200-10I and I want to disable the check system as it is time-consuming for the machine start up. Is there a way to diable that?
    Nedd your help!!:D

    If you are referring to CheckDisk, just let it run through and it should stop running after that, until the system crashes or the power shuts off while in Windows.
    If it keeps on appearing, test the Hard Disk for errors by using DFT.
    DFT Download: http://www.hitachigst.com/hdd/support/download.htm#DFT
    Download the ISO File and burn it to a CD-R Disc (There is also a Floppy Disk version if that's easier).
    If you dont know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
    Restart your laptop and boot from the DFT Disc.
    Choose the "Advanced" Test and let it run (it may take an hour or so).
    If you see a red message box, the HDD is faulty.
    An error code 0x70 means there are bad sectors and the HDD needs replacing.

  • USB mouse will not initialise on boot-up when used via Dynadock on Satellite Pro U200

    The USB mouse will not initialize on boot-up when used via Dynadock on Satellite Pro U200. If the mouse is reseated on the Dynadock it works fine. I am using a Kensington Valuoptical USB mouse. I have tried alternative kensington mouse and had the same problem. Can anyone advise how to resolve this issue?

    Hi Jeremy
    Unfortunately I have no solution for your issue but it can also be some technical limitation. I am also interesting to buy such docking station and I would like to know if there is the same problem with external HDD or USB memory sticks.

  • PCMCIA is not working properly on Satellite Pro U200 with Vista

    Hi I have upgraded to Vista home premium on U200 and so far almost everything is fine.
    I do however have 2 issues relating to PCMCIA that are bugging me:
    - Any PCMCIA card inserted causes the machine to slow down drastically and mouse movement etc becomes juddery. This is particularly bad if I insert a Toshiba PCMCIA hard drive or a card reader.
    - I havea PCMCIA digital TV card for which I cannot find Vista drivers. It works fine with the XP drivers however i get awful screeching sounds and high pitched beeps for a minute or so every time I change channel. The card is a generic card from an OEM provider.
    Any help appreciated.

    Did you try to update the BIOS or change the settings in the BIOS?
    The Pro u200 was delivered with Toshiba BIOS I hope
    On the second BIOS page you could try to change the PC card controller mode. Maybe you will notice any improvements.
    For Vista PCMCIA digital TV card driver you should ask the card manufacture or visit the support page sorry this is everything what I can suggest

  • Satellite pro s300m - Upgrade from XP Pro to Vista Business

    Hello All
    I bought a new Satellite Pro S300m Ez2401 and it came with Vista business and i downgraded it to XP Pro using the XP Pro media that accompanied the Laptop.
    If i want to upgrade it to Vista business, How do i do it? I did not create a recovery Media when i switched on the system the first time and Vista Business came up.
    Would the preinstalled Vista Business be in the Hard Disk and can i upgrade it from there?If so, would it also have the drivers along with it?
    How many Intel WiFi 5100 AGN  antennas does my laptop have?
    Thank you.
    Jay
    Solved!
    Go to Solution.

    Jay,
    To find out whether or not your recovery partition is still intact, shut down the system (not in Stand By or Hibernate mode).  Then press and hold down the '0' (zero) key while turning the system on.  It will boot into a recovery menu if that partition is intact.
    You won't be able to upgrade to Vista Business, and by that I mean that you cannot retain your data and programs.  But you can return the laptop to the factory condition with a fresh installation of Vista Business. 
    So you'll end up with exactly what you had when you first took it out of the box and turned it on, including an appropriate set of drivers.  Before running the recovery process, you'll want to backup all data you want to keep, and when recovery is complete you'll need to reinstall any software.
    If holding down '0' while turning the system on does not result in a recovery menu then you can call Customer Service (800-457-7777) to order a set of recovery media for a nominal fee.
    Jim

  • Blank screen after display driver update Satellite Pro P200

    I installed the latest ATI Mobility Radeon HD2600 display driver (8.432, from the Toshiba site via Tempo) on my Satellite Pro P200 yesterday. On rebooting everything looks fine as far as the Windows Vista Business "Please wait ..." screen, but instead of displaying the login page I get a blank screen (with a mouse cursor that moves around as normal). All I can do at this point is power off, and I've run out of ideas on how to get any further.
    Things I've tried:
    # booting into safe mode, low-resolution video or last known good configuration all result in the same blank screen.
    # connecting to the system using remote desktop (to disable the driver) isn't possible because the system hasn't loaded the network drivers yet.
    # I can't revert to a restore point because Vista can't find any (I made a manual one after installing windows updates on a couple of days ago).
    I can run a command prompt from the system recovery options and would prefer to use that to disable the driver +if+ I knew how before resorting to the more drastic options.
    A web search (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
    previous releases of the driver, but none of the links I've looked at give a solution that's available to me.

    No joy with an external screen so I bit the bullet and reinstalled from the product recovery disk. I tried expert mode to retain the data partition but that failed twice, so I had to restore it from the previous day's backup after doing a full reinstall. Two consolations, though.
    # It allowed me to increase the size of the data partition.
    # The display driver update worked fine on the fresh install.
    Needless to say I've since found [http://support.microsoft.com/kb/927525] which describes how you can disable a problem device driver (atikmdag in my case) from the system recovery command prompt :-(
    Hopefully the instructions in there will help anybody who gets caught with similar problems.

Maybe you are looking for